The effectiveness of methods of shape analysis / Cliff A. Lemen.

n.s. no.15(1983)

Science policy : USA/USSR / [report prepared for National Science Foundation, Directorate for Scientific, Technological and International Affairs, Division of International Programs].

2

Endogeneizing know-how flows through the nature of R&D investments

In this paper we carefully link knowledge flows to and from a firms innovation process with this firms investment decisions. Three types of investments are considered: investments in applied research, investments in basic research, and investments in intellectual property protection. Only when basic research is performed, can the firm effectively access incoming knowledge flows and these incoming spillovers serve to increase the efficiency of own applied research.. The firm can at the same time influence outgoing knowledge flows, improving appropriability of its innovations, by investing in protection. Our results indicate that firms with small budgets for innovation will not invest in basic research. This occurs in the short run, when the budget for know-how creation is restricted, or in the long-run, when market opportunities are low, when legal protection is not very important, or, when the pool of accessible and relevant external know-how is limited. The ratio! of basic to applied research is non-decreasing in the size of the pool of accessible external know-how, the size and opportunity of the market, and, the effectiveness of intellectual property rights protection. This indicates the existence of economies of scale in basic research due to external market related factors. Empirical evidence from a sample of innovative manufacturing firms in Belgium confirms the economies of scale in basic research as a consequence of the firms capacity to access external knowledge flows and to protect intellectual property, as well as the complementarity between legal and strategic investments.

Technological trampolines for new venture creation in Catalonia: the case of the University of Girona

Recent trends in technology transfer show an intensification of spin-off creation as a modality of university research commercialisation, complementary to the conventional ones, contract research and licensing. In this paper we analyse the evolution, objectives, resources and activities of a specialised unit –Technological Trampoline (TT) - in charge of new venture creation at the University of Girona (Catalonia-Spain). Based on two theoretical frameworks, Resource-based-view and Institutional Theory, we adopt a multi-dimensional approach to study the strategy of spinning-off new ventures at the University of Girona in terms of resources and activities, how this process is organised and if the outputs fit with this UdG’s objectives and the local environment. Our main contribution is an in-depth analysis of the spin-off creation unit with special emphasis on its variety of resources and activities. The results have a series of implications and recommendations at both university and TT level.

Innovation and internasionalisation. A focus on the Spanish exporting firms

International markets are very competitive so innovation seems unavoidable. Some authors describe internationalisation as being an innovation of the firm. In this research these two phenomena will be studied, through a multiple case study method, focusing on the existence of a reciprocal relationship between the processes of internationalisation and innovation.

Comparing impact and cost-effectiveness of primary prevention strategies for lipid-lowering.

BACKGROUND: Lipid-lowering therapy is costly but effective at reducing coronary heart disease (CHD) risk. OBJECTIVE: To assess the cost-effectiveness and public health impact of Adult Treatment Panel III (ATP III) guidelines and compare with a range of risk- and age-based alternative strategies. DESIGN: The CHD Policy Model, a Markov-type cost-effectiveness model. DATA SOURCES: National surveys (1999 to 2004), vital statistics (2000), the Framingham Heart Study (1948 to 2000), other published data, and a direct survey of statin costs (2008). TARGET POPULATION: U.S. population age 35 to 85 years. Time Horizon: 2010 to 2040. PERSPECTIVE: Health care system. INTERVENTION: Lowering of low-density lipoprotein cholesterol with HMG-CoA reductase inhibitors (statins). OUTCOME MEASURE: Incremental cost-effectiveness. RESULTS OF BASE-CASE ANALYSIS: Full adherence to ATP III primary prevention guidelines would require starting (9.7 million) or intensifying (1.4 million) statin therapy for 11.1 million adults and would prevent 20,000 myocardial infarctions and 10,000 CHD deaths per year at an annual net cost of $3.6 billion ($42,000/QALY) if low-intensity statins cost $2.11 per pill. The ATP III guidelines would be preferred over alternative strategies if society is willing to pay $50,000/QALY and statins cost $1.54 to $2.21 per pill. At higher statin costs, ATP III is not cost-effective; at lower costs, more liberal statin-prescribing strategies would be preferred; and at costs less than $0.10 per pill, treating all persons with low-density lipoprotein cholesterol levels greater than 3.4 mmol/L (>130 mg/dL) would yield net cost savings. RESULTS OF SENSITIVITY ANALYSIS: Results are sensitive to the assumptions that LDL cholesterol becomes less important as a risk factor with increasing age and that little disutility results from taking a pill every day. LIMITATION: Randomized trial evidence for statin effectiveness is not available for all subgroups. CONCLUSION: The ATP III guidelines are relatively cost-effective and would have a large public health impact if implemented fully in the United States. Alternate strategies may be preferred, however, depending on the cost of statins and how much society is willing to pay for better health outcomes. FUNDING: Flight Attendants' Medical Research Institute and the Swanson Family Fund. The Framingham Heart Study and Framingham Offspring Study are conducted and supported by the National Heart, Lung, and Blood Institute.

Cinéastes indépendants, politique fédérale du cinéma et co-production du 'Nouveau cinéma suisse', 1963-1970. Contribution à une sociologie de l'innovation artistique

Ce travail s'intéresse aux modalités d'émergence et d'institutionnalisation d'un nouveau régime de création artistique, plus connu sous le nom de «Nouveau cinéma suisse ».Dans les années 1960-1970, l'arrivée du Nouveau cinéma suisse a bouleversé les manières de faire du cinéma en Suisse et a attiré l'attention sur le septième art helvétique. Comment une innovation artistique parvient-elle à s'imposer ? Comment un consensus autour d'une nouvelle forme artistique et de son mode de production émerge et se stabilise-t-il ? Quel rôle jouent les acteurs et les institutions dans ce processus ? Enfin, quelles sont les relations entre cette situation en devenir et les oeuvres créées dans ces conditions ? Au delà dé ces interrogations, c'est un questionnement théorique, épistémologique qui a motivé cette recherche. A l'image de la sociologie elle-même, l'analyse sociologique de l'art a été traversée, ces dernières années, pas de nombreux débats. Trop souvent, la réflexion s'appuie - ou trébuche -sur des dichotomies convenues :analyse interne /externe de l'art, déterminisme /indétermination des acteurs, reflet /autonomie des oeuvres. Quels sont les outils et les approches que propose la discipline pour analyser un tel objet, quels enseignements peut-on titrer de leur mise à l'épreuve sur un cas concret ? Quel est le défi lancé par le Nouveau cinéma suisse à la sociologie de l'art ?Mais commençons par le début car le point initial de cette longue entreprise était en réalité tout autre.

Innovation sources and productivity in Catalonian firms: a quantile regression analysis

This paper explores the effects of two main sources of innovation -intramural and external R&D- on the productivity level in a sample of 3,267 Catalonian firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and knowledge-intensive services. JEL codes: O300, C100, O140. Keywords: Innovation sources, R&D, Productivity, Quantile regression

Cost-effectiveness of low-molecular-weight heparin for secondary prophylaxis of cancer-related venous thromboembolism.

Although extended secondary prophylaxis with low-molecular-weight heparin was recently shown to be more effective than warfarin for cancer-related venous thromboembolism, its cost-effectiveness compared to traditional prophylaxis with warfarin is uncertain. We built a decision analytic model to evaluate the clinical and economic outcomes of a 6-month course of low-molecular-weight heparin or warfarin therapy in 65-year-old patients with cancer-related venous thromboembolism. We used probability estimates and utilities reported in the literature and published cost data. Using a US societal perspective, we compared strategies based on quality-adjusted life-years (QALYs) and lifetime costs. The incremental cost-effectiveness ratio of low-molecular-weight heparin compared with warfarin was 149,865 dollars/QALY. Low-molecular-weight heparin yielded a quality-adjusted life expectancy of 1.097 QALYs at the cost of 15,329 dollars. Overall, 46% (7108 dollars) of the total costs associated with low-molecular-weight heparin were attributable to pharmacy costs. Although the low-molecular-weigh heparin strategy achieved a higher incremental quality-adjusted life expectancy than the warfarin strategy (difference of 0.051 QALYs), this clinical benefit was offset by a substantial cost increment of 7,609 dollars. Cost-effectiveness results were sensitive to variation of the early mortality risks associated with low-molecular-weight heparin and warfarin and the pharmacy costs for low-molecular-weight heparin. Based on the best available evidence, secondary prophylaxis with low-molecular-weight heparin is more effective than warfarin for cancer-related venous thromboembolism. However, because of the substantial pharmacy costs of extended low-molecular-weight heparin prophylaxis in the US, this treatment is relatively expensive compared with warfarin.

Industrial districts, innovation and I-district

The I-district effect hypothesis establishes the existence of highly intense innovation in Marshallian industrial districts due to the presence of external localization economies. However, industrial districts are characterized by specific manufacturing specializations in such a way that this effect could be due to these dominant specializations. The objective of this research is to test whether the effect is explained by the conditions of the territory or by the industrial specialization and to provide additional evidence of the existence and causes of the highly intense innovation in industrial districts (I-district effect). The estimates for Spain of a fixed effects model interacting territory and industry suggest that the high innovative performance of industrial districts is maintained across sectors whereas the industrial specialization behaves differently depending on the type of local production system in which it is placed. The I-district effect is related to the conditions of the territory more than to the industrial specialization. The territory is a key variable in explaining the processes of innovation and should be considered a basic dimension in the design of innovation and industrial policies.

Innovation, R&D spillovers and productivity: the role of knowledge-intensive services

This paper analyses the performance of companies’ R&D and innovation and the effects of intra- and inter-industry R&D spillover on firms’ productivity in Catalonia. The paper deals simultaneously with the performance of manufacturing and service firms, with the aim of highlighting the growing role of knowledge-intensive services in promoting innovation and productivity gains. We find that intra-industry R&D spillovers have an important effect on the productivity level of manufacturing firms, and the inter-industrial R&D spillovers related to computer and software services also play an important role, especially in high-tech manufacturing industries. The main conclusion is that the traditional classification of manufactured goods and services no longer makes sense in the ‘knowledge economy’ and in Catalonia the regional policy makers will have to design policies that favour inter-industrial R&D flows, especially from high-tech services.

Barriers to innovation and public policy in Catalonia

The present paper analyses the link between firms’ decisions to innovate and the barriers that prevent them from being innovative. The aim is twofold. First, it analyses three groups of barriers to innovation: the cost of innovation projects, lack of knowledge and market conditions. Second, it presents the main steps taken by Catalan Government to promote the creation of new firms and to reduce barriers to innovation. The data set used is based on the 2004 official innovation survey of Catalonia which was taken from the Spanish CIS-4 sample. This sample includes individual information on 2,954 Catalan firms in manufacturing industries and knowledge-intensive services (KIS). The empirical analysis reveals pronounced differences regarding a firm’s propensity to innovate and its perception of barriers. Moreover, the results show that cost and knowledge barriers seem to be the most important and that there are substantial sectoral differences in the way that firms react to barriers. The results of this paper have important implications for the design of future public policy to promote entrepreneurship and innovation together.

Innovation sources and productivity: a quantile regression analysis

This paper explores the effects of two main sources of innovation —intramural and external R&D— on the productivity level in a sample of 3,267 Catalan firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and services industries.

Effectiveness of three different walking prescription durations on total physical activity in normal- and overweight women.

OBJECTIVE: While there is a dose-response relationship between physical activity (PA) and health benefit, little is known about the effectiveness of different PA prescriptions on total daily PA. AIM: To test, under real-life conditions and using an objective, non-invasive measurement technique (accelerometry), the effect of prescribing additional physical activity (walking only) of different durations (30, 60 and 90 min/day) on compliance (to the activity prescribed) and compensation (to total daily PA). Participants in each group were prescribed 5 sessions of walking per week over 4 weeks. METHODS: 55 normal-weight and overweight women (mean BMI 25 ± 5 kg/m(2), height 165 ± 1 cm, weight 68 ± 2 kg and mean age 27 ± 1 years) were randomly assigned to 3 prescription groups: 30, 60 or 90 min/day PA. RESULTS: Walking duration resulted in an almost linear increase in the number of steps per day during the prescription period from an average of about 10,000 steps per day for the 30-min prescription to about 14,000 for the 90-min prescription. Compliance was excellent for the 30-min prescription but decreased significantly with 60-min and 90-min prescriptions. In parallel, degree of compensation subsequent to exercise increased progressively as length of prescription increased. CONCLUSION: A 30-min prescription of extra walking 5 times per week was well tolerated. However, in order to increase total PA further, much more than 60 min of walking may need to be prescribed in the majority of individuals. While total exercise 'volume' increased with prescriptions longer than 30 min, compliance to the prescription decreased and greater compensation was evident. © 2014 S. Karger GmbH, Freiburg.

Both Sides of the Story: Skill-biased Technological Change, Labour Market Frictions, and Endogenous Two-Sided Heterogeneity

This paper presents a stylised framework to examine how skill-biased technological change and labour market frictions affect the relationship between economic expansion and unskilled unemployment. The first part of the analysis focuses on the investment decisions in skill-acquisition and technology adoption activities faced by workers and firms in response to the introduction of an innovative technology. The second part examines how endogenous two-sided heterogeneity in the labour market affects the macroeconomic outcomes in terms of unemployment, technological diffusion, and economic expansion. To conclude, the framework is used to discuss the effects of alternative forms of policy intervention on agents' investment decisions and on the macroeconomic outcomes.