Modelagem da variação horária da temperatura do ar em Petrolina, PE, e Botucatu, SP

The air temperature is a climatic element of interest for several agricultural related studies. Hence, daily air temperature from two locations in Brazil (Botucatu and Petrolina, with different climate classification), hourly recorded from January 2004 to December 2005, were analysed to verify if 24 h long air temperature variation can be predicted with 6 h interval records. Three data set were selected, with different first time record of air temperature, and analyses performed using geoestatistics to confirm the temporal dependency of records. Then, ordinary krigging was used to model air temperature variation within 1 h interval, and spherical model presented the best approach, with range of 11.6 h for Botucatu and 12.7 for Petrolina. For both locations, the time of air temperature recording was the most importnat factor on accuracy of estimation of air temperature variation. Records at 2, 8, 14 and 20 h and at 4, 10, 16 and 22 h presented the best approaches, but for records at 9, 15 and 21 h, the approach was worst.

Variabilidade espacial da resistência do solo à penetração e do teor de água em sistema de plantio direto na cultura da soja

A harmful and limiting factor regarding culture productivity is soil compaction, a parameter that can be quantified by the resistance of the soil to penetration and highly influenced by water content. These variables present spatial and temporary variability, characteristics which can be determined by the geostatistical technique. In the light of the above, the present work had as its objective the study of spatial variability of soil resistance to penetration (RP) and water content in the soil (U) in soy culture. The RP values at depths of 0,00-0,10; 0,11-0,20 and 0,21-0,30 m varied from 2,9 to 4,28 MPa and are considered harmful to the root development of legumes, although they have not influenced soy productivity which was 3887 kg ha(-1). The medium water content of the soil was between 0,210 and 0,213 kg kg(-1) for the three depths studied. The resistance of the soil to penetration, expressed through semivariograms, presented spatial dependence at all depths, being adjusted to the spherical model at depths of 0,00-0,10m and exponential at depths of 0,110,20 and 0,21-0,30 m. The spatial variability for all studied layers presented a range of about 20m. The water content in the soil did not present spatial dependence for the depths, presenting randomized distribution.

Predição de propagação de fissuras através de modelos constitutivos locais e técnica de construção progressiva da trajetória de descontinuidade

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicativos computacionais para geografia: classificacao multivariada por agrupamento

This paper presents a method for multidimensional classification (Cluster Analysis), as well as a 8 bits microcomputer program in BASIC that automates the process. A practical application of the model is also presented. -English summary

Variaveis da ocupacao do solo e analise multivariada

Photointerpretative and multivariate statistical techniques were applied to variants of soil use measured in 4 hydrological basins of third order ramification, belonging to Tiete basin municipal district of Botucatu, Sao Paulo State. The aim was the grouping of basins of second degree of similarity, as well as to infer spatial distribution representativeness. The hydrological basins were located in 3 physiographic regions, with peripheric depression, cuesta front and cuesta backslope, embracing the following soil units: Regosol intergrade to Red Yellow Podzolic and intergrade to Red Yellow Latosol, Red Yellow Latosol-sandy phase, Litosol basaltic substract phase and Purple Latosol. The results obtained allow the conclusion that soil use not always reflects its fertility. -after English summary

Planejamento de Fontes Reativas em Sistemas de Energia Elétrica utilizando a técnica de Decomposição de Benders e o algoritmo de Branch-and-Bound

This paper presents the Benders decomposition technique and Branch and Bound algorithm used in the reactive power planning in electric energy systems. The Benders decomposition separates the planning problem into two subproblems: an investment subproblem (master) and the operation subproblem (slave), which are solved alternately. The operation subproblem is solved using a successive linear programming (SLP) algorithm while the investment subproblem, which is an integer linear programming (ILP) problem with discrete variables, is resolved using a Branch and Bound algorithm especially developed to resolve this type of problem.

Técnica alternativa de conformação de junção a partir de tubos metálicos

This work presents a technique for the cold forming of thin-walled cylindrical tubes, aimed at obtaining a symmetrical joint with an unconventional forming technique, using elastomer rod. The purpose of this work is to investigate the influence of the anisotropy on the total forming force, through the use of elastomer for obtaining T-junctions, in order to get a better result between experimental values and the analytical solution. For total forming force forecasting, it will be used the upper-bound theory and for a better understanding on the anisotropy behavior of the material, it will be employed the quadratic yielding criterion proposed by Hill. The employed materials for such investigation were Aluminum, Brass and Copper.

Prototipagem como forma alternativa para realização de cranioplastia com metilmetacrilato: Nota técnica

The prototyping is a method for reconstruction of human body segments by computer software. It has been used in neurosurgery for cranial reproduction in patients allowing the programming of surgical procedures and the production of prosthesis to reconstruct bone failures in the skull. We present two cases of cranioplasty performed with the use of acrylic prosthesis constructed by prototyping. After 10 months of follow-up, they donot present signs of infection and show good aesthetic result. The advantages pointed at the literature for this method (reduction of surgical time, easy technical handle, and good aesthetic result) were confirmed.

Aplicação da técnica de condicionamento total ou de primers autocondicionantes em dentes decíduos após abrasão a ar

Since the use of air abrasion has grown in pediatric dentistry, the aim of this study was to evaluate, by means of shear bond strength testing, the need to use the total etching technique or self-etching primers on dentin of primary teeth after air abrasion. Twenty-five exfoliated primary molars had their occlusal dentin exposed by trimming and polishing. Specimens were treated by: Air abrasion + Scotchbond MultiPurpose adhesive (G1); 37% phosphoric acid + Scotchbond MP adhesive (G2); Clearfil SE (G3); Air abrasion ( 37% phosphoric acid + Scotchbond MP adhesive (G4); Air abrasion + Clearfil SE (G5). On the treated surface, a cylinder of 2 mm by 6 mm was made using a composite resin (Z100). Duncan's test showed that: (G2 = G3 = G5) > (G1 = G4). The use of a selfetching primer on air abraded dentin is recommended to obtain higher bond strengths.

Técnica autorradiográfica para investigação geológica - Estudo de caso na área do projeto rio preto

The auto-radiography is a photographic method to registrate in sensitive emulsion the spatial distribution a rays emitted by radioisotopes of a sample or an object. The auto-radiography was applied to detect the presence of radioactive minerals in some samples of schists and gneisses from the Ticunzal Formation, Northeast Goiás State, aiming to implement the use of this technique in LABIDRO - Hydrochemistry and Isotopes Laboratory of the Department of Petrology and Metallogenesis, State University of São Paulo/Campus of Rio Claro.

Aplicação da Geoestatística Não-paramétrica para a compartimentação geomecânica de uma extensão típica do túnel do metrô - Linha 4, da cidade de São Paulo

In view of the limited number of drill holes, interpolation of the data becomes a relatively complex task. In this study, we sought to make estimates associated with lithological types, since a quantification based on lithology can be extracted from the empty spaces in the sampling. For example, QBarton is always below the median of the biotitic litotype, information which can be used in the elaboration of geostatistical models in situations where samples are lacking. To overcome bias in the data, required by geostatistical conceptualization, we worked with the residuals obtained from the adjustment of a surface and the observed values, for the variographic analysis. The final results made possible a more optimized evaluation of the final costs required for the construction project.

Avaliação da distribuição da densidade em MDF a partir da técnica da onda de ultra-som

The goal of this research was to determine the density distribution in medium density fiberboard (MDF), manufactured with polyurethane derived from castor oil using, ultrasonic wave technique. The equipment used in this test is Steinkamp BP7 with plan and exponential transducers, both with 45 kHz frequencies, located in several zones on the plate in order to determine wave ultrasonic velocity. The Pinus caribaea and Eucalyptus grandis fiberboard were manufactured in the quality control and products development laboratory of Duratex with 500 mm long, 500 mm large, 8 and 15 mm of thickness. Three MDF for each fiber specimen and thickness were fabricated, totalizing twelve plates tested. The MDF were produced with 5% polyurethane addition, in temperature of 160°C, tension press of 53 bars and addition of moisture content of 12%. For determination of fiberboard density, samples were extracted from the same zones where the wave ultrasonic velocity was determined. In this case, DAX-Ray equipment was used. Statistical analysis shows good agreement with wave ultrasonic velocity and the density profile, validating the application of non-destructive technique in order to determine the density profile of MDF's.

Introdução à técnica de planejamento

Incluye Bibliografía

Introducción a la técnica de programación: selección

Incluye Bibliografía