Greenhouse crisphead lettuce grown with mulching and under different soil water tensions

ABSTRACT Proper irrigation management is important both to enable adequate water supply and to minimize problems with diseases, nutrient leaching and unnecessary water and power wastes. Thus, this study aimed at improving irrigation management in greenhouses. For that reason, we assessed the effect of various water tensions on yield performance of crisphead lettuce, Raider-Plus cv. , grown with mulching. The experiment was conducted in greenhouse at the Federal University of Lavras. Treatments constituted five different soil water tensions, namely 12, 25, 35, 45, and 70 kPa. The results showed that irrigation must be carried out at water soil tension of around 12 kPa to reach satisfying commercial values for both total and commercial yield, 66 and 50 t ha-1, as well as keeping good vegetable quality. At this tension, total water consumption was of 167.25 mm. The water use efficiency demonstrated quadratic response to treatments, with high water consumption efficiency found in intermediate treatments (35 and 45 kPa), achieving values of 579.87 and 471.71 kg ha -1mm-1, respectively.

The Dark Side of International Business? Stakeholder Approach to Human Trafficking in Finnish Construction and Service Sectors

Human trafficking is not a new phenomenon. It has existed in various forms for ages around the world. Some researchers have even compared it to slavery, calling it the modern form of slavery in the 21st century. This study is particularly interested in the role of work-related human trafficking in Finnish business. In order for something to be called work-related human trafficking, the concepts of forced labour and human trafficking have to overlap. From the economic point of view, human trafficking is governed by the laws of supply and demand. In many countries the global pressure on cutting costs has created two trends: the increased supply of migrant workers and the deregulation of labour markets. These competitive pressures can have an adverse impact on the conditions of employment and, in the worst cases, can lead to forced labour and trafficking. In fact, trafficking has become one of the most profitable illicit industries worldwide, generating tremendous profits due to its low costs and huge profits. Therefore, it is important to investigate the phenomenon from the business point of view. This study is a qualitative research conducted by using theme interviews as a research approach. Altogether 13 interviews have been conducted and some secondary data has been used in order to find out what the role of human trafficking is in Finnish business. The special sectors investigated are the Finnish construction and service sectors. The theory framework used in this study follows the stakeholder approach. The relevant stakeholder groups for this study are: ‘institutions and authorities’, ‘law enforcement’, ‘management’ and ‘employees – potential victims’ of trafficking. With the help of these stakeholder groups, a holistic picture of the phenomenon is formed. It can be concluded that the role of human trafficking is complicated but it does exist in Finnish business. It appears in low-cost business sectors where the demand for cheap labour is high. Thus, often the victims are foreigners who do not know the culture or the Finnish conditions of employment. Especially smaller Finnish companies are at risk of getting involved in human trafficking or related exploitation cases since monitoring is much more scarce in these firms than in larger companies. The risk of human trafficking and exploitation is also higher at the bottom of the complicated subcontracting chains or when using foreign recruitment agencies. Thus, the study believes that active and intensive collaboration between the company’s different stakeholder groups is needed in order to prevent work-related human trafficking from flourishing in Finland.

Strategic alliances as an international entry strategy: Finnish cleantech SMEs and the Indian market

The demand for environmental technologies, also called cleantech, is growing globally but the need is especially high in emerging markets such as India where the rising economy and rapid industrialisation have led to increasing energy needs and environmental degradation. The market is of great potential also for the Finnish cleantech cluster that represents advanced expertise in several fields of environmental technologies. However, most of the Finnish companies in the field are SMEs that face challenges in their internationalisation due to their limited resources. The objective of this study was to estimate, whether strategic alliances could be an efficient entry strategy for Finnish cleantech SMEs entering the Indian market. This was done by studying what are the key factors influencing the international entry mode decision of Finnish cleantech SMEs, what are the major factors affecting the entry of Finnish cleantech SMEs to the Indian market and how do Finnish cleantech SMEs use strategic alliances in their internationalisation process. The study was realised as a qualitative multi-case study through theme interviews of Finnish cleantech SME representatives. The results indicated that Finnish cleantech SMEs prefer to enter international markets through non-equity and collaborative modes of entry. These entry modes are chosen because of the small size and limited resources of companies, but also because they want to protect their innovative technologies from property rights violations. India is an attracting market for Finnish cleantech SMEs mainly because of its size and growth, but insufficient environmental regulation and high import tariffs have hindered entry to the market. Finnish cleantech SMEs commonly use strategic alliances in their internationalisation process but the use is rather one-sided. Most of the formed strategic alliances are low-commitment, international contractual agreement in sales and distribution. Alliance partner selection receives less attention. In the future, providing Finnish cleantech SMEs with international experience and training could help in diversifying the use of strategic alliances and increase their benefits to SME internationalisation.

Automatic system identification and optimization of centrifugal pump operation

Centrifugal pumps are a notable end-consumer of electrical energy. Typical application of a centrifugal pump is the filling or emptying of a reservoir tank, where the pump is often operated at a constant speed until the process is completed. Installing a frequency converter to control the motor substitutes the traditional fixed-speed pumping system, allows the optimization of rotational speed profile for the pumping tasks and enables the estimation of rotational speed and shaft torque of an induction motor without any additional measurements from the motor shaft. Utilization of variable-speed operation provides the possibility to decrease the overall energy consumption of the pumping task. The static head of the pumping process may change during the pumping task. In such systems, the minimum rotational speed changes during reservoir filling or emptying, and the minimum energy consumption can’t be achieved with a fixed rotational speed. This thesis presents embedded algorithms to automatically identify, optimize and monitor pumping processes between supply and destination reservoirs, and evaluates the changing static head –based optimization method.

Nuclear and mitochondrial DNA markers in traceability of retail beef samples

Several characteristics are important in a traceability system of animal products, such as age at slaughter, breed composition, besides information of the productive chain. In general, the certification agent records information about the animals and the system which it came from, although cannot guarantee that the slaughtering, meat processing and distribution are error proof. Besides, there is a differential price, at least at the international market, based on sex and breed composition of the animals. Genetic markers allow identification of characteristics controlled in the beef cattle traceability program, as sex and breed composition, in order to correctly identify and appraise the final product for the consumer. The hypothesis of this study was that the majority beef samples retailed in the local market originate from female with a great participation of zebu breeds. Therefore, the objective of this work was to characterize retail beef samples with DNA markers that identify cattle sex and breed composition. Within 10 beef shops localized in Pirassununga, SP, Brazil, 61 samples were collected, all were genotyped as harboring Bos taurus mitochondrial DNA and 18 were positive for the Y chromosome amplification (male). For the marker sat1711b-Msp I the frequency of the allele A was 0.278 and for the marker Lhr-Hha I the frequency of the allele T was 0.417. The results of sat1711b-Msp I and Lhr-Hha I allelic frequencies are suggestive that the proportion of indicus genome compared with the taurine genome in the market meat is smaller than the observed in the Nellore breed. The procedure described in this study identified sex and subspecies characteristics of beef meat samples, with potential application in meat products certification in special as an auxiliary tool in beef cattle traceability programs.

Standardization of metachromatic staining method of myofibrillar ATPase activity of myosin to skeletal striated muscle of mules and donkeys

This study aims at standardizing the pre-incubation and incubation pH and temperature used in the metachromatic staining method of myofibrillar ATPase activity of myosin (mATPase) used for asses and mules. Twenty four donkeys and 10 mules, seven females and three males, were used in the study. From each animal, fragments from the Gluteus medius muscle were collected and percutaneous muscle biopsy was performed using a 6.0-mm Bergström-type needle. In addition to the metachromatic staining method of mATPase, the technique of nicotinamide adenine dinucleotide tetrazolium reductase (NADH-TR) was also performed to confirm the histochemical data. The histochemical result of mATPase for acidic pre-incubation (pH=4.50) and alkaline incubation (pH=10.50), at a temperature of 37ºC, yielded the best differentiation of fibers stained with toluidine blue. Muscle fibers were identified according to the following colors: type I (oxidative, light blue), type IIA (oxidative-glycolytic, intermediate blue) and type IIX (glycolytic, dark blue). There are no reports in the literature regarding the characterization and distribution of different types of muscle fibers used by donkeys and mules when performing traction work, cargo transportation, endurance sports (horseback riding) and marching competitions. Therefore, this study is the first report on the standardization of the mATPase technique for donkeys and mules.

Tuotelaadunhallintamallin kehittäminen taajuusmuuttajien varaosaliiketoiminnassa

Tutkimuksen tarkoituksena on ollut arvioida ja kehittää tuotelaadunhallintamalli taajuusmuuttajien elinkaaripalveluja tarjoavassa ABB Oy, Drives, Drives Service liiketoimintayksikössä. ABB:n valmistamat taajuusmuuttajat säätävät asiakkaiden prosesseja ympäri maailman useissa erityyppisissä sovelluksissa. Vanhimmat varaosatuen piirissä olevat asennukset ovat 1980-luvulta. Aluksi työssä tarkastellaan niitä elementtejä, joista laatu muodostuu eli kokemusperäisiä elementtejä sekä kvantitatiivisia attribuutteja. Yhteistä molemmille on, että niitä voidaan aktiivisesti monitoroida ja hallita. Laadun hallitsemiseksi verkostoituneessa toimintaympäristössä tarvitaan ymmärrystä liiketoimintaverkostoista ja erilaisien komponenttitoimittajien ja jakeluverkostojen markkinakentästä. Laatua ja liiketoimintaverkostoja käsittelevien osuuksien jälkeen pureudutaan kunnossapitoon ja sen lainalaisuuksiin. Lopuksi muodostetaan varaosaliiketoimintaa tukeva tuotelaadunhallintamalli, joka pyrkii peilaamaan erilaisien viitekehysten avulla tarkoituksen mukaista toimintamallia varaosatoimitusten tuotelaadun vaalimiseksi.

Growth and mineral nutrition Of Ipomoea quamoclit

A greenhouse experiment was carried out from November 2006 to April 2007 at FCAV/UNESP, Brazil, aiming to study the dry mass production and the accumulation and distribution of macronutrients in Ipomoea quamoclit, an important weed for annual and perennial crops in Brazil. The plants were grown in seven liter pots with sand substrate, daily irrigated with Hoagland & Arnon nutrient solution. The experimental design was completely randomized with four replicates. The treatments corresponded to evaluation times at 14 day intervals, beginning 21 days after emergence (DAE). In each evaluation, the plants of four pots were analyzed in function of dry mass production and macronutrient content. I. quamoclit had a small dry mass and macronutrient accumulation at the beginning of the experimental stage, increasing after 77 DAE and reaching the maximum theoretical value at 146, 143, 140, 149, 142, 153, and 124 DAE, for dry mass, N, P, K, Ca, Mg, and S, respectively. K and N were the macronutrients most accumulated by I. quamoclit plants.

Growth and mineral nutrition of Solanum americanum

A greenhouse trial was carried out from November 1995 to April 1996 at FCAV/UNESP, Brazil, aiming to study the dry matter production and the accumulation and distribution of macronutrients in Solanum americanum, an important weed for annual and perennial crops in Brazil. The plants were grown in seven liter pots with sand substrate, irrigated daily with Hoagland & Arnon nutrient solution. The experimental design was completely randomized with four replicates. The treatments corresponded to evaluation times at 14 day intervals, beginning 21 days after emergence (DAE). In each evaluation, the plants of four pots were analyzed for dry matter production and macronutrient content. S. americanum had a small dry matter and macronutrient accumulation at the beginning of the experimental stage, increasing after 77 DAE and reaching the maximum theoretical value at 142, 142, 164, 149, 140, 149 and 152 DAE, for dry matter, N, P, K, Ca, Mg, and S, respectively. K and N were the most accumulated macronutrients for S. americanum plants.

Accumulation of dry mass and macronutrients by sourgrass plants

The experiment was carried out aiming to analyze the dry mass production and distribution and the content and accumulation of macronutrients in sourgrass (Digitaria insularis) plants cultivated under mineral nutrition standard conditions. Plants grew in 7-liter pots filled with sand substrate and daily irrigated with nutrient solution, being maintained under greenhouse conditions. Treatments consisted of times of evaluation (21, 35, 49, 63, 77, 91, 105, 119, and 133 days after emergence - DAE) and were arranged in a completely randomized design with four replicates. Sourgrass showed small accumulation of dry mass (0.3 g per plant) and macronutrients (3.7 mg of N per plant, 0.4 mg of P per plant, 5.6 mg of K per plant, 0.9 mg of Ca per plant, 0.7 mg of Mg per plant, and 0.3 mg of S per plant) at vegetative growth stage (< 49 DAE). Those accumulations increased mainly after 77 DAE, reaching the maximum theoretical value at 143, 135, 141, 129, 125, 120, and 128 DAE, for dry mass (12.4 g per plant), N (163.2 mg per plant), P (27.1 mg per plant), K (260.5 mg per plant), Ca (47.6 mg per plant), Mg (30.9 mg per plant), and S (13.7 mg per plant), respectively. K and N were found with higher rates and, as a consequence, they were required and accumulated in greater amounts in plant tissues of sourgrass.

Integrating the export distribution channels after an acquisition

This thesis is based on studying integration synergies in a merger or acquisition situation with the interest in distribution channel integration. M&As seem to be forever popular and nowadays companies often use them as a certain kind of strategy to develop their business. M&As have attracted research for decades and also distribution in M&As has been found interesting. Moreover, research often concentrates to the horizontal M&A´s potential synergies that emerge in the integration process and so is the case also in this study as the core issue is to study the integration of the distribution channels and its potential synergies. This study concentrates on a single case, an acquisition which took place in 2011. The case consists of two Finnish companies operating in the same business field. Both of the companies are very export orientated, which gives this study its export view. As the companies operate in the same field this acquisition falls into the categorization of horizontal acquisition. The objective of the thesis is to study how the export channels could be integrated after an acquisition? This research question is divided again to three sub-questions asking how the distribution channels of the acquirer and acquired company are organized, what is pursued by the post-acquisition distribution channel integration and what are the integration challenges especially from the logistics point-of-view. The framework was built from the basis of the literature used in this thesis. The framework combines M&A process and distribution channels to a one united model which presents the progress of this thesis. The study was carried out as a qualitative research and as a holistic single case study. The data used in the research includes two interviews, other material from the case companies and also material of the companies collected by the author independently from different sources. There were many motives for the acquisition as usual. From the research results one can find that the integration process is still very ongoing and the synergies have not yet been fully discovered but also they are there to be found. The concentration of the research was in the export distribution which proved to be meaningful since the exports markets of the case companies were found to be quite complementary. The research results brought up also other issues concerning the post-acquisition integration process rather than the distribution channels and export. M&As are always a risky business. The final result can never be predicted. No matter how good the merging companies look on paper the practice is not the same. The acquisition process of this case has not ended yet and there lies potential synergy benefits to be discovered if enough effort is used to go through the process right.

Achieving EU energy targets – Impacts of evolutionary and revolutionary transition paths on power systems

Ambitious energy targets set by EU put pressures to increase share of renewable electricity supply in this and next decades and therefore, some EU member countries have boosted increasing renewable energy generation capacity by implementing subsidy schemes on national level. In this study, two different change approaches to increase renewable energy supply and increase self-sufficiency of supply are assessed with respect to their impacts on power system, electricity market and electricity generation costs in Finland. It is obtained that the current electricity generation costs are high compared to opportunities of earnings from present-day investor’s perspective. In addition, the growth expectations of consumptions and the price forecasts do not stimulate investing in new generation capacity. Revolutionary transition path is driven by administrative and political interventions to achieve the energy targets. Evolutionary transition path is driven by market-based mechanisms, such as market itself and emission trading scheme. It is obtained in this study that in the revolutionary transition path operation of market-based mechanisms is distorted to some extent and it is likely that this path requires providing more public financial resources compared to evolutionary transition path. In the evolutionary transition path the energy targets are not achieved as quickly but market-based mechanisms function better and investment environment endures more stable compared to revolutionary transition path.

Evidence for the presence of a kininogen-like species in a case of total deficiency of low and high molecular weight kininogens

Low and high molecular weight kininogens (LK and HK), containing 409 and 626 amino acids with masses of ~65 and 120 kDa after glycosylation, respectively, are coded by a single gene mapped to the human chromosome 3 by alternative splicing of the transcribed mRNA. The NH2-termini Glu1-Thr383 region, identical in LK and HK, contains bradykinin (BK) moieties Arg363-Arg371. LK, HK and their kinin products Lys-BK and BK are involved in several biologic processes. They are evolutionarily conserved and only 7 patients, all apparently normal, have been reported to lack them. In one of these patients (Williams' trait), a codon mutation (Arg178 ® stop) has been blamed for the absence of LK and HK. However, using Western blots with 2 monoclonal anti-HK antibodies, one that recognizes the region common to LK and HK and the other that recognizes only HK, I detected ~110-kDa bands in the plasma of this LK/HK-deficient patient vs ~120-kDa bands in normal human and ape plasmas. With polyclonal anti-Lys-BK antibody, which strongly detects BK cleaved at its COOH-terminus in purified HK, I detected ~110-kDa bands in the normal and the deficient plasmas. Western blots with a monoclonal anti-prekallikrein (PK) antibody showed that surface activation of PK and distribution of PK activation products, both dependent on HK, were similar in these plasmas. These findings suggest that a mutant gene yielded a kininogen-like species possibly involving aberrant mRNA splicing - structurally different from normal HK, but apparently with the capacity to carry out seemingly vital HK functions.

Linking supplier delivery risk to outbound delivery service performance improvement

Customer satisfaction should be the main focus for all of the parts of the business. Usually supply chain behind the business is in a key role when this focus is pursued especially in repair service business. When focusing on the materials that are needed to make repairs to equipment under service contracts, the time aspect of quality is critical. Do late deliveries from supplier have an effect on the service performance of repairs when distribution center of a centralized purchasing unit is acting as a buffer between suppliers and repair service business? And if so, how should the improvement efforts be prioritized? These are the two main questions that this thesis focuses on. Correlation and linear regression was tested between service levels of supplier and distribution center. Percentage of on-time deliveries were compared to outbound delivery service level. It was found that there is statistically significant correlation between inbound and outbound operations success. The other main question of the thesis, improvement prioritization, was answered by creating material availability based supplier classification and additional to that, by developing the decision process for the analysis of most critical suppliers. This was built on a basis of previous supplier and material classification methods.

The demand-supply balancing process in supply chain management - case mining & metals industry equipment

The aim of this thesis is to search how to match the demand and supply effectively in industrial and project-oriented business environment. The demand-supply balancing process is searched through three different phases: the demand planning and forecasting, synchronization of demand and supply and measurement of the results. The thesis contains a single case study that has been implemented in a company called Outotec. In the case study the demand is planned and forecasted with qualitative (judgmental) forecasting method. The quantitative forecasting methods are searched further to support the demand forecast and long term planning. The sales and operations planning process is used in the synchronization of the demand and supply. The demand forecast is applied in the management of a supply chain of critical unit of elemental analyzer. Different meters on operational and strategic level are proposed for the measurement of performance.