On the cutting stock problem under stochastic demand

This paper addresses the one-dimensional cutting stock problem when demand is a random variable. The problem is formulated as a two-stage stochastic nonlinear program with recourse. The first stage decision variables are the number of objects to be cut according to a cutting pattern. The second stage decision variables are the number of holding or backordering items due to the decisions made in the first stage. The problem`s objective is to minimize the total expected cost incurred in both stages, due to waste and holding or backordering penalties. A Simplex-based method with column generation is proposed for solving a linear relaxation of the resulting optimization problem. The proposed method is evaluated by using two well-known measures of uncertainty effects in stochastic programming: the value of stochastic solution-VSS-and the expected value of perfect information-EVPI. The optimal two-stage solution is shown to be more effective than the alternative wait-and-see and expected value approaches, even under small variations in the parameters of the problem.

In vitro effect of low-level laser on odontoblast-like cells

The aim of this study was to evaluate the metabolism of odontoblast-like MDPC-23 cells subjected to direct LLL irradiation. The cells were seeded (20,000 cells/well) in 24-well plates and incubated for 24 hours at 37 degrees C. After this period, the culture medium (DMEM) was replaced by fresh DMEM supplemented with 2 or 5% (stress induction by nutritional deficit) or 10% fetal bovine serum (FBS). The cells were exposed to laser doses of 2, 4, 10, 15 and 25 J/cm(2) from a near infrared InGaAsP diode laser prototype (LASERTable; 780 +/- 3 nm, 40 mW). One control group (sham irradiation) was established for each experimental condition (laser dose x FBS supplementation). Three and 72 hours after the last irradiation, cells were analyzed with respect to metabolism, morphology, total protein expression and alkaline phosphatase (ALP) activity. Higher metabolism and total protein expression were observed 72 hours after the last irradiation at the doses of 15 and 25 J/cm(2) (Mann-Whitney; p<0.05). Higher ALP activity was obtained with 5% FBS when the cells were irradiated with doses of 2 and 10 J/cm(2). For the dose of 25 J/cm(2), the highest ALP activity was observed with 10% FBS. It was concluded that the LLLT parameters used in this study stimulated the metabolic activity of the MDPC-23 cells, especially at the doses of 15 and 25 J/cm(2).

Synthesis, Infrared Spectroscopy and Crystal Structure Determination of a New Decavanadate

Synthesis, infrared spectroscopy and crystal structure of a new potassium decavanadate decahydrate, K(6)[V(10)O(28)] 10H(2)O, has been reported The infrared spectrum is dominated by decavanadate polyanion and water bands The X-ray crystallography analysis found the compound crystallizes in a triclinic system with the parameters a = 10 5334 (4) angstrom, b = 10 6600 (4) angstrom, c = 17 7351 (5) angstrom, alpha = 76 940 (2)degrees, beta = 75 836 (2)degrees, gamma = 64 776 (2)degrees, V = 1,729 86 (11) A(3), Z = 2, space group P (1) over bar The polyanion consists of ten [VO(6)] octahedra sharing edges, in which the V-O distances are in good agreement with those reported for other decavanadates The crystal structure is stabilized by potassium cations and water molecules forming a complex pattern of hydrogen bonding and short contact ionic interactions

Evaluation of dental pulp repair using low level laser therapy (688 nm and 785 nm) morphologic study in capuchin monkeys

The aim of this study was to evaluate the hypothesis that low-level laser therapy (LLLT) 688 nm and 785 nm accelerate dentin barrier formation and repair process after traumatic pulp exposure. The sample consisted of 45 premolars of capuchin monkeys (Cebus apella) with pulp exposure Class V cavities. All premolars were treated with calcium hydroxide (Ca(OH)(2)), divided in groups of 15 teeth each, and analyzed on 7(th), 25(th), and 60(th) day. Group GI - only Ca(OH)(2), GIF- laser 688 nm, and GIII - laser 785 nm. Laser beam was used in single and punctual dose with the parameters: continuous, 688 nm and 785 nm wavelength, tip`s area of 0.00785 cm(2), power 50 mW, application time 20 s, dose 255 J/cm(2), energy 2 J. Teeth were capped with Ca(OH)(2), Ca(OH)(2) cement and restored with amalgam. All groups presented pulp repair. On 25(th) day the thickness of the formed dentin barrier was different between the groups GI and GII (p < 0.05) and between groups GI and GIII (p < 0.01). On 60(th) day there was difference between GI and GIII (p < 0.01). It may be concluded that, LLLT 688 nm and 785 nm accelerated dentin barrier formation and consequently pulp repair process, with best results using infrared laser 785 nm. (c) 2009 by Astro Ltd. Published exclusively by WLLEY-VCH Verlag GmbH & Co. KGaA

[(13)C(2)]- Acetaldehyde Promotes Unequivocal Formation of 1,N(2)-Propano-2 `-deoxyguanosine in Human Cells

Acetaldehyde is an environmentally widespread genotoxic aldehyde present in tobacco smoke, vehicle exhaust and several food products. Endogenously, acetaldehyde is produced by the metabolic oxidation of ethanol by hepatic NAD-dependent alcohol dehydrogenase and during threonine catabolism. The formation of DNA adducts has been regarded as a critical factor in the mechanisms of acetaldehyde mutagenicity and carcinogenesis. Acetaldehyde reacts with 2`-deoxyguanosine in DNA to form primarily N(2)-ethylidene-2`-deoxyguanosine. The subsequent reaction of N(2)-ethylidenedGuo with another molecule of acetaldehyde gives rise to 1,N(2)-propano-2`-deoxyguanosine (1,N(2)-propanodGuo), an adduct also found as a product of the crotonaldehyde reaction with dGuo. However, adducts resulting from the reaction of more than one molecule of acetaldehyde in vivo are still controversial. In this study, the unequivocal formation of 1,N(2)-propanodGuo by acetaldehyde was assessed in human cells via treatment with [(13)C(2)]-acetaldehyde. Detection of labeled 1,N(2)-propanodGuo was performed by HPLC/MS/MS. Upon acetaldehyde exposure (703 mu M), increased levels of both 1,N(2)-etheno-2`-deoxyguanosine (1,N(2)-epsilon dGuo), which is produced from alpha,beta-unsaturated aldehydes formed during the lipid peroxidation process, and 1,N(2)-propanodGuo were observed. The unequivocal formation of 1,N(2)-propanodGuo in cells exposed to this aldehyde can be used to elucidate the mechanisms associated with acetaldehyde exposure and cancer risk.

Environmental formaldehyde analysis by active diffusive sampling with a bundle of polypropylene porous capillaries followed by capillary zone electrophoretic separation and contactless conductivity detection

Compared to other volatile carbonylic compounds present in outdoor air, formaldehyde (CH2O) is the most toxic, deserving more attention in terms of indoor and outdoor air quality legislation and control. The analytical determination of CH2O in air still presents challenges due to the low-level concentration (in the sub-ppb range) and its variation with sampling site and time. Of the many available analytical methods for carbonylic compounds, the most widespread one is the time consuming collection in cartridges impregnated with 2,4-dinitrophenylhydrazine followed by the analysis of the formed hydrazones by HPLC. The present work proposes the use of polypropylene hollow porous capillary fibers to achieve efficient CH2O collection. The Oxyphan (R) fiber (designed for blood oxygenation) was chosen for this purpose because it presents good mechanical resistance, high density of very fine pores and high ratio of collection area to volume of the acceptor fluid in the tube, all favorable for the development of air sampling apparatus. The collector device consists of a Teflon pipe inside of which a bundle of polypropylene microporous capillary membranes was introduced. While the acceptor passes at a low flow rate through the capillaries, the sampled air circulates around the fibers, impelled by a low flow membrane pump (of the type used for aquariums ventilation). The coupling of this sampling technique with the selective and quantitative determination of CH2O, in the form of hydroxymethanesulfonate (HMS) after derivatization with HSO3-, by capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-(CD)-D-4) enabled the development of a complete analytical protocol for the CH2O evaluation in air. (C) 2008 Published by Elsevier B.V.

Electronic synergism in [RuCl(2)(PPh(3))(2)(amine)] complexes differing the reactivity for ROMP of norbornene and norbornadiene

The reactivity of the new complex [RuCl(2)(PPh(3))(2)(3,5-Me(2)piperidine)], complex 1, was investigated for ring opening metathesis polymerization (ROMP) of norbornene (NBE) and norbornadiene (NBD) in the presence of ethyl diazoacetate (EDA) in CHCl(3). The aim is to observe the combination of PPh(3) and an amine as ancillary ligands concerning the steric hindrance and the electronic perturbation in the properties of the N-bound site when replacing the amines. Thus, the results with 1 were compared to the results obtained when the amine is piperidine (complex 2). Reaction with 1 provides 70% yield of isolated polyNBE (M(n) =8.3 x 10(4) g/mol; PDI = 2.03), whereas 2 provides quantitative reaction (M(n) = 1.2 x 10(5) g/mol; PDI = 1.90) with [NBE]/[Ru] = 5000, [EDA]/[Ru] = 48 and 1.1 mu mol of Ru for 5 min at 25 degrees C. The resulting polymers showed c.a. 62% of trans-polyNBE, determined by (1)H NMR, and T(g) = 32 degrees C, determined by DSC and DMTA. For ROMP of NBD, 1 showed quantitative yield with PDI =2.62 when [NBD]/[Ru] = 5000 for 20 min at 25 degrees C, whereas the reaction with 2 reached 55% with PDI = 2.16 in the same conditions. It is concluded that the presence of the two methyl groups in the piperidine ring provides an increase in the induction period to produce the Ru-carbene species justifying better polyNBE results with 2, and a greater amine(sigma)-> Ru(pi)-> monomer synergism which contributed to the best activation of less tensioned olefin as NBD. (C) 2010 Elsevier B.V. All rights reserved.

A quantum chemical study on a set of non-imidazole H(3) antihistamine molecules

Molecular orbital calculations were carried out on a set of 28 non-imidazole H(3) antihistamine compounds using the Hartree-Fock method in order to investigate the possible relationships between electronic structural properties and binding affinity for H3 receptors (pK(i)). It was observed that the frontier effective-for-reaction molecular orbital (FERMO) energies were better correlated with pK(i) values than highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy values. Exploratory data analysis through hierarchical cluster (HCA) and principal component analysis (PCA) showed a separation of the compounds in two sets, one grouping the molecules with high pK(i) values, the other gathering low pK(i) value compounds. This separation was obtained with the use of the following descriptors: FERMO energies (epsilon(FERMO)), charges derived from the electrostatic potential on the nitrogen atom (N(1)), electronic density indexes for FERMO on the N(1) atom (Sigma((FERMO))c(i)(2)). and electrophilicity (omega`). These electronic descriptors were used to construct a quantitative structure-activity relationship (QSAR) model through the partial least-squares (PLS) method with three principal components. This model generated Q(2) = 0.88 and R(2) = 0.927 values obtained from a training set and external validation of 23 and 5 molecules, respectively. After the analysis of the PLS regression equation and the values for the selected electronic descriptors, it is suggested that high values of FERMO energies and of Sigma((FERMO))c(i)(2), together with low values of electrophilicity and pronounced negative charges on N(1) appear as desirable properties for the conception of new molecules which might have high binding affinity. 2010 Elsevier Inc. All rights reserved.

Silver Nanoparticles Obtained in PAH/PAA-Based Multilayers by Photochemical Reaction

Carboxylic acid groups in PAH/PAA-based multilayers bind silver cations by ion exchange with the acid protons. The aggregation and spatial distribution of the nanoparticles proved to be dependent oil the process used to reduce the silver acetate aqueous solution. The reducing method with ambient light formed larger nanoparticles with diameters ranging from 4-50 nm in comparison with the reduction method using UV light, which gave particles with diameters of 2-4 nm The high toughness of samples reduced by ambient light is a result of two population distributions of particle sizes caused by different mechanisms when compared with the UV light process. According to these phenomena, a judicious choice of the spectral source call be used as a way to control the type and size of silver nanoparticles formed on PEMs. Depending on the energy of the light source, the Ag nanoparticles present cubic and/or hexagonal crystallographic structures, as confirmed by XRD. Beyond the kinetically controlled process of UV photoinduced cluster formation, the annealing produced by UV light allowed a second mechanism to modify the growth rates, spatial distribution, and phases.

Attractive Work Process

Many companies both in Sweden and other parts of the world are since the beginning of the 21st century faceing a lack of work force (1,2,3). The ability to recruit and retain skilled employees is seen as one of the most important questions for the survival and development of the companies (4,5). Labour shortage is seen as the biggest obstacle for expansion for small enterprises in Sweden (5). There is a need for workplaces to be attractive, but how can the attractiveness be increased? Researchers at H&#246;gskolan Dalarna have during almost a decennium conducted research concerning attractive work. Based on a modell of qualities that contributes to make a work attractive (6) has a method aiming for raised attractiveness been developed for SME:s. All employees participate by answering a questionnaire about the importance of different qualities and to what degree they are fulfilled. Further discussions at the workplace on what to preserve and what to develop make the base for an action plan.Important experiences:226; Discuss and establish the aim of the method with management and employees. 226; The company must be prepared to follow up and realize the action plan.226; Agree about expectations 211; they must be realistic and practicable.226; Reserve time to start the process and to end up in an action plan. 226; Avoid negative thinking and put problems away. 226; Take all the time small steps in the right direction.226; Keep employees engaged and avoid the manager or process leader to take the command.226; Use the strategy with small work groups; it gives better possibilities for participation and outspokenness.226; Follow up studies are necessary to keep up the motivation.The most positive aspects of the method is its promoting perspective and that it engages all the employees.1.Rauhut, D. (2002). Arbetskraftsbrist och arbetskraftsinvandring: hot eller m&#246;jlighet f&#246;r ekonomisk tillv&#228;xt? &#214;stersund, ITPS, Institutet f&#246;r tillv&#228;xtpolitiska studier.2.Funch, M. and C. Ehrnooth. (2008, 08-10-2008). Labour shortage despite financial crisis? Retrieved 2008-12-16, 2008, from www.norden.org/webb/news/news.asp?id=8113&lang=6. 3.Manpower (2008). Talent Shortage Survey 2008 Global Results: 10. 4.Bakker, A. B. and W. B. Schaufeli (2008). Positive organizational behavior: Engaged employees in flourishing organizations. Journal of Organizational Behavior 29: 147-154.5.Kennemar, J. and L. Jagr&#233;n (2008). Sm&#229;f&#246;retagsbarometern. Stockholm, Swedbank F&#246;retagarna: 23.6.Åteg, M., A. Hedlund, et al. (2004). Attraktivt arbete. Fr&#229;n anst&#228;lldas uttalanden till skapandet av en modell. Stockholm, Arbetslivsinstitutet.

Kundernas behov i butiksmiljöer : Skillnaderna mellan handlares och kunders uppfattning av kundernas behov i klädbutiker

Konkurrensen inom detaljhandeln blir allt hårdare, både från andra butiker men även från e-handeln, vilket sätter press på fysiska butiker att ha nöjda kunder som fortsätter handla i butiken. Ett tillvägagångssätt för att möta den hårdnande konkurrensen är att ha en butiksmiljö s.k. servicescape som är utformad efter kundernas behov, vilket dock förutsätter att handlarna vet vilka behov sina kunder har. Har handlarna en felaktig uppfattning om kundernas behov föreligger det ett gap som minskar chansen att kunderna blir nöjda och därmed butikens konkurrenskraft. En avgränsning gjordes till klädbutiker, då klädbutiker är bland de butikstyper som är mest konkurrensutsatt. Syftet med uppsatsen var att kartlägga hur kundernas behov överensstämmer eller skiljer sig från handlarnas uppfattning om deras behov. För att uppfylla syftet tillämpades en kvalitativ metod men med en statistisk bearbetning dvs. en kvantitativ bearbetning då resultatet redovisades med hjälp av frekvenser och värden på en skala. Datainsamlingsverktyget som användes var enkäter och utformades efter de tio faktorerna som sammanställdes i den teoretiska referensramen. Enkäterna delades ut till både kunder och handlare i Borlänges stadskärna och Faluns stadskärna. Resultatet av uppsatsen visade att det för faktorerna ljus (4,2), trängsel (4.5) (4.6), Ljud (4.7), toaletter (4.9), (4.10) finns en skillnad ett s.k. gap mellan handlarnas uppfattning om kundernas behov och vad kundernas behov egentligen är. Det framkom även att handlarna ansåg att kunderna har större behov av att faktorerna rent & städat (4.3), (4.4) in & utgångar (4.8) är tillfredsställande än vad kunderna egentligen har. Det framkom precis som behandlades i den teoretiska referensramen att kundernas behov tenderar att variera utifrån deras demografiska faktorer ålder och kön. Om handlarna har en låg, medel eller hög prisnivå påverkade även det hur viktigt det är för kunderna att faktorerna är tillfredsställande. Slutsatsen som författarna identifierade var att det föreligger ett gap mellan handlarnas uppfattning om kundernas behov och vad kunderna anser att deras behov är gällande flera av faktorerna. Detta är dock något som kunderna säger vilket inte behöver stämma överrens med hur de verkligen tycker. Det är dock svårt att urskilja något mönster gällande gapen utan det är nästan enbart tendenser man kan urskilja, vilket gör att varje faktor bör analyseras individuellt.

Reglerad miljöredovisning : Tillståndspliktiga företag i Dalarna 2013

Bakgrund: De verksamheter som bedriver miljöfarlig verksamhet enligt miljöbalkenär anmälnings- eller tillståndspliktiga. Dessa företag ska lämnamiljöinformation i förvaltningsberättelsen. Tidigare studier visar attföretagen inte följer denna regel fullt ut. Som förklaring till företagensval av att miljöredovisa eller att inte redovisa sin miljöpåverkan användervi oss av legitimitetsteorin och intressentteorin.Syfte: Syftet med undersökningen är att för år 2013 se hur väl detillståndspliktiga företagen i Dalarna följer lagen om miljöredovisningoch vilka faktorer som kan förklara deras tillämpning av lagen.Metod: Studien bygger huvudsakligen på kvantitativ metod med inslag avkvalitativ metod. Vi använder en deduktiv ansats för att skapa fyrahypoteser om omsättning, branschtillhörighet, revisionsbyrå ochskuldsättningsgrad. Urvalet är de tillståndspliktiga företagen i Dalarna.Varje företag kan ha flera enheter som är tillståndspliktiga och vårt urval,Dalarna, blir 209 enheter varav 116 är stora enheter.Slutsats: Företagen i Dalarna uppfyller inte lagen om reglerad miljöredovisning tillfullo. Endast 18 av 116 stora enheter uppfyller alla fyra punkterna.Däremot är det 61,2 procent av de stora enheterna som får tre poäng.Som en jämförelse med Ljungdahls studie där nästan 27 procent når trepoäng ser vi en klar förbättring. De faktorer som kan förklara företagenstillämpning av lagen i vår undersökning är omsättning, de som anlitarrevisionsbyrån PwC samt branschtillhörighet avlopp och avfall. Av defyra hypoteser som vi använder är det en som stämmer, två som förkastasoch en som vi inte med säkerhet kan avgöra om den ska vara kvar ellerförkastas.

Protection of spruce seedlings against pine weevil attacks by treatment of seeds or seedlings with nicotinamide, nicotinic acid and jasmonic acid

Sustainable methods are required to protect newly planted tree seedlings from insect herbivore attack. To this end, here Norway spruce (Picea abies (L.) Karst.) seeds were treated with 2.5 mM nicotinamide (NIC), 2.5 mM nicotinic acid (NIA), 3 mM jasmonic acid (JA) or 0.2 mM 5-azacytidine (5-Aza), and 6-month-old seedlings grown from these seeds were planted at a reforestation area in central Sweden. Attack by pine weevils (Hylobius abietis) was reduced by 50 per cent by NIC treatment, 62.5 per cent by JA treatment and 25 per cent by 5-Aza treatment, when compared with seedlings grown from untreated seeds. Watering 18-month-old spruce seedlings with 2 mM NIC or 2 mM NIA did reduce attack during the first season in the field by 40 and 53 per cent, respectively, compared with untreated plants. Girdling was also reduced by the different treatments. Analysis of conifer seedlings treated with 5-Aza points at a possible involvement of epigenetic mechanisms in this defensive capacity. This is supported by a reduced level of DNA methylation in the needles of young spruce seedlings grown in a greenhouse from NIC-treated seeds. Seed treatment for seedling defense potentiation is simple, inexpensive and also a new approach for forestry with many potential applications.