A review of climate risk information for adaptation and development planning

Although the use of climate scenarios for impact assessment has grown steadily since the 1990s, uptake of such information for adaptation is lagging by nearly a decade in terms of scientific output. Nonetheless, integration of climate risk information in development planning is now a priority for donor agencies because of the need to prepare for climate change impacts across different sectors and countries. This urgency stems from concerns that progress made against Millennium Development Goals (MDGs) could be threatened by anthropogenic climate change beyond 2015. Up to this time the human signal, though detectable and growing, will be a relatively small component of climate variability and change. This implies the need for a twin-track approach: on the one hand, vulnerability assessments of social and economic strategies for coping with present climate extremes and variability, and, on the other hand, development of climate forecast tools and scenarios to evaluate sector-specific, incremental changes in risk over the next few decades. This review starts by describing the climate outlook for the next couple of decades and the implications for adaptation assessments. We then review ways in which climate risk information is already being used in adaptation assessments and evaluate the strengths and weaknesses of three groups of techniques. Next we identify knowledge gaps and opportunities for improving the production and uptake of climate risk information for the 2020s. We assert that climate change scenarios can meet some, but not all, of the needs of adaptation planning. Even then, the choice of scenario technique must be matched to the intended application, taking into account local constraints of time, resources, human capacity and supporting infrastructure. We also show that much greater attention should be given to improving and critiquing models used for climate impact assessment, as standard practice. Finally, we highlight the over-arching need for the scientific community to provide more information and guidance on adapting to the risks of climate variability and change over nearer time horizons (i.e. the 2020s). Although the focus of the review is on information provision and uptake in developing regions, it is clear that many developed countries are facing the same challenges. Copyright © 2009 Royal Meteorological Society

Globalisation and the evolution of international retailing: a comment on Alexander's 'British overseas retailing, 1900-1960'

Nicholas Alexander's (2011. British overseas retailing, 1900–60: International firm characteristics, market selections and entry modes. Business History, 53, 530–556) survey of British overseas retailers from 1900 to 1960 provides pathbreaking new evidence of international retailing activity during the first globalisation boom. The article surveys this and other recent evidence, and confirms that international retailing was far more significant up to 1929 than previously thought. This activity was overwhelmingly undertaken by non-retailers, however, and hence by multinationals whose advantages in retailing were fundamentally unsustainable over the long run. Even the department store format, the principal retail innovation of the period, was not internationalised primarily by multinationals. Rather it was diffused via indigenous entrepreneurs, driven by a rapidly growing global demand for western style fashion and dress.

CPD records for revalidation: assessing fitness-to-practise using ‘revalidation standards’ and an Outcomes Framework

Background: Currently, all pharmacists and technicians registered with the Royal Pharmaceutical Society of Great Britain must complete a minimum of nine Continuing Professional Development (CPD) record (entries) each year. From September 2010 a new regulatory body, the General Pharmaceutical Council, will oversee the regulation (including revalidation) of all pharmacy registrants in Great Britain. CPD may provide part of the supporting evidence that a practitioner submits to the regulator as part of the revalidation process. Gaps in knowledge necessitated further research to examine the usefulness of CPD in a pharmacy revalidation Project aims: The overall aims of this project were to summarise pharmacy professionals’ past involvement in CPD, examine the usability of current CPD entries for the purpose of revalidation, and to examine the impact of ‘revalidation standards’ and a bespoke Outcomes Framework on the conduct and construction of CPD entries for future revalidation of pharmacy professionals. We completed a comprehensive review of the literature, devised, validated and tested the impact of a new CPD Outcomes Framework and related training material in an empirical investigation involving volunteer pharmacy professionals and also spoke with our participants to bring meaning and understanding to the process of CPD conduct and recording and to gain feedback on the study itself. Key findings: The comprehensive literature review identified perceived barriers to CPD and resulted in recommendations that could potentially rectify pharmacy professionals’ perceptions and facilitate participation in CPD. The CPD Outcomes Framework can be used to score CPD entries Compared to a control (CPD and ‘revalidation standards’ only), we found that training participants to apply the CPD Outcomes Framework resulted in entries that scored significantly higher in the context of a quantitative method of CPD assessment. Feedback from participants who had received the CPD Outcomes Framework was positive and a number of useful suggestions were made about improvements to the Framework and related training. Entries scored higher because participants had consciously applied concepts linked to the CPD Outcomes Framework whereas entries scored low where participants had been unable to apply the concepts of the Framework for a variety of reasons including limitations posed by the ‘Plan & Record’ template. Feedback about the nature of the ‘revalidation standards’ and their application to CPD was not positive and participants had not in the main sought to apply the standards to their CPD entries – but those in the intervention group were more likely to have referred to the revalidation standards for their CPD. As assessors, we too found the process of selecting and assigning ‘revalidation standards’ to individual CPD entries burdensome and somewhat unspecific. We believe that addressing the perceived barriers and drawing on the facilitators will help deal with the apparent lack of engagement with the revalidation standards and have been able to make a set of relevant recommendations. We devised a model to explain and tell the story of CPD behaviour. Based on the concepts of purpose, action and results, the model centres on explaining two types of CPD behaviour, one following the traditional CE pathway and the other a more genuine CPD pathway. Entries which scored higher when we applied the CPD Outcomes Framework were more likely to follow the CPD pathway in the model above. Significant to our finding is that while participants following both models of practice took part in this study, the CPD Outcomes Framework was able to change people’s CPD behaviour to make it more inline with the CPD pathway. The CPD Outcomes Framework in defining the CPD criteria, the training pack in teaching the basis and use of the Framework and the process of assessment in using the CPD Outcomes Framework, would have interacted to improve participants’ CPD through a collective process. Participants were keen to receive a curriculum against which certainly CE-type activities could be conducted and another important observation relates to whether CE has any role to play in pharmacy professionals’ revalidation. We would recommend that the CPD Outcomes Framework is used in the revalidation of pharmacy professionals in the future provided the requirement to submit 9 CPD entries per annum is re-examined and expressed more clearly in relation to what specifically participants are being asked to submit – i.e. the ratio of CE to CPD entries. We can foresee a benefit in setting more regular intervals which would act as deadlines for CPD submission in the future. On the whole, there is value in using CPD for the purpose of pharmacy professionals’ revalidation in the future.

Data assimilation for state and parameter estimation: application to morphodynamic modelling

Data assimilation is predominantly used for state estimation; combining observational data with model predictions to produce an updated model state that most accurately approximates the true system state whilst keeping the model parameters fixed. This updated model state is then used to initiate the next model forecast. Even with perfect initial data, inaccurate model parameters will lead to the growth of prediction errors. To generate reliable forecasts we need good estimates of both the current system state and the model parameters. This paper presents research into data assimilation methods for morphodynamic model state and parameter estimation. First, we focus on state estimation and describe implementation of a three dimensional variational(3D-Var) data assimilation scheme in a simple 2D morphodynamic model of Morecambe Bay, UK. The assimilation of observations of bathymetry derived from SAR satellite imagery and a ship-borne survey is shown to significantly improve the predictive capability of the model over a 2 year run. Here, the model parameters are set by manual calibration; this is laborious and is found to produce different parameter values depending on the type and coverage of the validation dataset. The second part of this paper considers the problem of model parameter estimation in more detail. We explain how, by employing the technique of state augmentation, it is possible to use data assimilation to estimate uncertain model parameters concurrently with the model state. This approach removes inefficiencies associated with manual calibration and enables more effective use of observational data. We outline the development of a novel hybrid sequential 3D-Var data assimilation algorithm for joint state-parameter estimation and demonstrate its efficacy using an idealised 1D sediment transport model. The results of this study are extremely positive and suggest that there is great potential for the use of data assimilation-based state-parameter estimation in coastal morphodynamic modelling.

Gap junctions and connexin hemichannels underpin hemostasis and thrombosis

BACKGROUND: Connexins are a widespread family of membrane proteins that assemble into hexameric hemichannels, also known as connexons. Connexons regulate membrane permeability in individual cells or couple between adjacent cells to form gap junctions and thereby provide a pathway for regulated intercellular communication. We have now examined the role of connexins in platelets, blood cells that circulate in isolation, but upon tissue injury adhere to each other and the vessel wall to prevent blood loss and facilitate wound repair. METHODS AND RESULTS: We report the presence of connexins in platelets, notably connexin37, and that the formation of gap junctions within platelet thrombi is required for the control of clot retraction. Inhibition of connexin function modulated a range of platelet functional responses prior to platelet-platelet contact, and reduced laser induced thrombosis in vivo in mice. Deletion of the Cx37 gene (Gja4) in transgenic mice reduced platelet aggregation, fibrinogen binding, granule secretion and clot retraction indicating an important role for Cx37 hemichannels and gap junctions in platelet thrombus function. CONCLUSIONS: Together, these data demonstrate that platelet gap junctions and hemichannels underpin the control of haemostasis and thrombosis and represent potential therapeutic targets.

Solvent-dependent modulation of metal–metal electronic interactions in a dinuclear cyanoruthenate complex: a detailed electrochemical, spectroscopic and computational study

The dinuclear complex [{Ru(CN)4}2(μ-bppz)]4− shows a strongly solvent-dependent metal–metal electronic interaction which allows the mixed-valence state to be switched from class 2 to class 3 by changing solvent from water to CH2Cl2. In CH2Cl2 the separation between the successive Ru(II)/Ru(III) redox couples is 350 mVand the IVCT band (from the UV/Vis/NIR spectroelectrochemistry) is characteristic of a borderline class II/III or class III mixed valence state. In water, the redox separation is only 110 mVand the much broader IVCT transition is characteristic of a class II mixed-valence state. This is consistent with the observation that raising and lowering the energy of the d(π) orbitals in CH2Cl2 or water, respectively, will decrease or increase the energy gap to the LUMO of the bppz bridging ligand, which provides the delocalisation pathway via electron-transfer. IR spectroelectrochemistry could only be carried out successfully in CH2Cl2 and revealed class III mixed-valence behaviour on the fast IR timescale. In contrast to this, time-resolved IR spectroscopy showed that the MLCTexcited state, which is formulated as RuIII(bppz˙−)RuII and can therefore be considered as a mixed-valence Ru(II)/Ru(III) complex with an intermediate bridging radical anion ligand, is localised on the IR timescale with spectroscopically distinct Ru(II) and Ru(III) termini. This is because the necessary electron-transfer via the bppz ligand is more difficult because of the additional electron on bppz˙− which raises the orbital through which electron exchange occurs in energy. DFT calculations reproduce the electronic spectra of the complex in all three Ru(II)/Ru(II), Ru(II)/Ru(III) and Ru(III)/Ru(III) calculations in both water and CH2Cl2 well as long as an explicit allowance is made for the presence of water molecules hydrogen-bonded to the cyanides in the model used. They also reproduce the excited-state IR spectra of both [Ru(CN)4(μ-bppz)]2– and [{Ru(CN)4}2(μ-bppz)]4− very well in both solvents. The reorganization of the water solvent shell indicates a possible dynamical reason for the longer life time of the triplet state in water compared to CH2Cl2.

‘These changes and accessions of knowledge’: translation, scientific travel writing and modernity - Alexander von Humboldt's Personal Narrative

A second English translation of Alexander von Humboldt's account of travel to South America, the Relation historique (1814–25), was published between 1852 and 1853. Appearing some 30 years after the first seven-volume translation (1814–29) by Helen Maria Williams, this second rendering of the Personal Narrative by Thomasina Ross was an abridged version that aimed to make Humboldt's travelogue more relevant to the mid-century reader. This translation has largely been overlooked by Humboldt scholars, despite it being a far more affordable, accessible and popular edition. I discuss here how Ross's revisions can be understood within a larger process of rereading and revision that responded to critics’ assessments of the first translation. Emphasising the status of the Personal Narrative as a text in flux, I assess how Ross modernised it to meet the demands of a new readership, recasting the image that Humboldt had constructed of himself as a travelling scientist, scientific writer and member of the international scientific community.

Historical and idealized climate model experiments: an intercomparison of Earth system models of intermediate complexity

Both historical and idealized climate model experiments are performed with a variety of Earth system models of intermediate complexity (EMICs) as part of a community contribution to the Intergovernmental Panel on Climate Change Fifth Assessment Report. Historical simulations start at 850 CE and continue through to 2005. The standard simulations include changes in forcing from solar luminosity, Earth's orbital configuration, CO2, additional greenhouse gases, land use, and sulphate and volcanic aerosols. In spite of very different modelled pre-industrial global surface air temperatures, overall 20th century trends in surface air temperature and carbon uptake are reasonably well simulated when compared to observed trends. Land carbon fluxes show much more variation between models than ocean carbon fluxes, and recent land fluxes appear to be slightly underestimated. It is possible that recent modelled climate trends or climate–carbon feedbacks are overestimated resulting in too much land carbon loss or that carbon uptake due to CO2 and/or nitrogen fertilization is underestimated. Several one thousand year long, idealized, 2 × and 4 × CO2 experiments are used to quantify standard model characteristics, including transient and equilibrium climate sensitivities, and climate–carbon feedbacks. The values from EMICs generally fall within the range given by general circulation models. Seven additional historical simulations, each including a single specified forcing, are used to assess the contributions of different climate forcings to the overall climate and carbon cycle response. The response of surface air temperature is the linear sum of the individual forcings, while the carbon cycle response shows a non-linear interaction between land-use change and CO2 forcings for some models. Finally, the preindustrial portions of the last millennium simulations are used to assess historical model carbon-climate feedbacks. Given the specified forcing, there is a tendency for the EMICs to underestimate the drop in surface air temperature and CO2 between the Medieval Climate Anomaly and the Little Ice Age estimated from palaeoclimate reconstructions. This in turn could be a result of unforced variability within the climate system, uncertainty in the reconstructions of temperature and CO2, errors in the reconstructions of forcing used to drive the models, or the incomplete representation of certain processes within the models. Given the forcing datasets used in this study, the models calculate significant land-use emissions over the pre-industrial period. This implies that land-use emissions might need to be taken into account, when making estimates of climate–carbon feedbacks from palaeoclimate reconstructions.

The 'child of Babylon' and the problem of paternity in Medieval French Alexander romances

A study of the use of hybrid physical appearance both to signal and to explore the disputed paternity of Alexander the Great throughout its vernacular French tradition. The article compares the 'child of Babylon' portent and Alexander's son Alior in the twelfth-century French "Roman d'Alexandre" poem cycle, and a fifteenth-century prose adaptation of it.