Causes and consequences of low rates of specialisation in science and technology in CDCC member countries

The importance of science and technology (S&T) in Small Island Developing States (SIDS) is clearly articulated in Chapter XI, paragraphs 57, 58, 61 and 62 of the Mauritius Strategy for the Further Implementation of the Programme of Action for Sustainable Development of Small Island Developing States (MSI). At the regional level, the Heads of Government of the Caribbean Community (CARICOM) noted the challenge that CARICOM member States face in competing in this new international economic environment in which the impact of scientific and technological change has created a knowledge-based global economy. Given the importance of S&T to development of Caribbean SIDS, the Economic Commission for Latin America and the Caribbean (ECLAC) Subregional Headquarters for the Caribbean embarked on a study to determine the causes and consequences of low rates of specialisation in S&T with a view to making recommendations for development of strategies for addressing these challenges. Data on postgraduate (Master of Science, Master of Philosophy and Doctor of Philosophy) enrolment and graduation in agriculture, engineering and the sciences from the three campuses of the University of the West Indies (UWI) as well as from the University of Technology in Jamaica and the University of Trinidad and Tobago (UTT) were examined and analysed. Face-to-face interviews were also held with key personnel from these institutions and a questionnaire was also served to individuals in key institutions. Results of the study revealed that although the number of students enrolled in higher degree programmes has increased in absolute terms, they are decreasing in relative terms. However, enrolment in agriculture has indeed declined while enrolment rates in engineering, although increasing, were not significantly high. Market forces have proved to be a main reason for this trend while facilities for the conduct and supervision of cutting-edge research, the disconnect between science and industry and societal labelling of scientists as “misfits” are also contributing to the situation. This has resulted in a reduced desire by students at all levels of the school system and faculty to be involved in S&T; lack of innovation; a better staffed private, as compared with public, sector; and poor remuneration in science-based employment. There also appears to be a gender bias in enrolment with more males than females being enrolled in engineering while the opposite is apparent in agriculture and the sciences. Recommendations for remedying this situation range from increasing investment in S&T, creating linkages between science and industry as well as with the international community, raising awareness of the value of S&T at all levels of the education system to informing policy to stimulate the science – innovation interface so as to promote intellectual property rights.

Born-Infeld electrodynamics in very special relativity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A coupling technique for non-matching finite element meshes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of handrim design on the contact forces on hands'surface: a preliminary study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Segurança na América do Sul: uma abordagem histórico-conceitual

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Studies on the Helminth Fauna of Alaska. XIII. Disease in the Sea Otter, with Special Reference to Helminth Parasites

During the spring of 1951, the U. S. Fish and Wildlife Service undertook the removal of sea otter, Enhydra lutris (L)., from the Aleutian Island of Amchitka, for the purpose of restocking range from which the animals have long been exterminated. The decision to undertake this activity was influenced by the nature of military operations planned for the island later the same year. The capture and removal of the otter were under the supervision of Mr. Robert D. Jones, Biologist, U. S. Fish and Wildlife Service. Heavy losses among the animals shortly after capture made the venture unsuccessful. Many deaths were concurrent among animals in the wild state. The writer was asked to investigate the causes of disease in the sea otter, and it is the purpose of this paper to report the results of these investigation, with special reference to helminth parasites.

The influence of "C-factor" and light activation technique on polymerization contraction forces of resin composite

Objectives: This study evaluated the influence of the cavity configuration factor ("C-Factor") and light activation technique on polymerization contraction forces of a Bis-GMA-based composite resin (Charisma, Heraeus Kulzer). Material and Methods: Three different pairs of steel moving bases were connected to a universal testing machine (Emic DL 500): groups A and B - 2x2 mm (CF=0.33), groups C and D - 3x2 mm (CF=0.66), groups E and F - 6x2 mm (CF=1.5). After adjustment of the height between the pair of bases so that the resin had a volume of 12 mm(3) in all groups, the material was inserted and polymerized by two different methods: pulse delay (100 mW/cm(2) for 5 s, 40 s interval, 600 mW/cm(2) for 20 s) and continuous pulse (600 mW/cm(2) for 20 s). Each configuration was light cured with both techniques. Tensions generated during polymerization were recorded by 120 s. The values were expressed in curves (Force(N) x Time(s)) and averages compared by statistical analysis (ANOVA and Tukey's test, p<0.05). Results: For the 2x2 and 3x2 bases, with a reduced C-Factor, significant differences were found between the light curing methods. For 6x2 base, with high C-Factor, the light curing method did not influence the contraction forces of the composite resin. Conclusions: Pulse delay technique can determine less stress on tooth/restoration interface of adhesive restorations only when a reduced C-Factor is present.

Special identities for Bol algebras

Bol algebras appear as the tangent algebra of Bol loops. A (left) Bol algebra is a vector space equipped with a binary operation [a, b] and a ternary operation {a, b, c} that satisfy five defining identities. If A is a left or right alternative algebra then A(b) is a Bol algebra, where [a, b] := ab - ba is the commutator and {a, b, c} := < b, c, a > is the Jordan associator. A special identity is an identity satisfied by Ab for all right alternative algebras A, but not satisfied by the free Bol algebra. We show that there are no special identities of degree <= 7, but there are special identities of degree 8. We obtain all the special identities of degree 8 in partition six-two. (C) 2011 Elsevier Inc. All rights reserved.

Effect of a rocker non-heeled shoe on EMG and ground reaction forces during gait without previous training

Unstable shoes have been designed to promote "natural instability" and during walking they should simulate barefoot gait, enhancing muscle activity and, thus, attributing an advantage over regular tennis shoes. Recent studies showed that, after special training on the appropriate walking pattern, the use of the Masai Barefoot Technology (MBT) shoe increases muscle activation during walking. Our study presents a comparison of muscle activity as well as horizontal and vertical forces during gait with the MBT, a standard tennis shoe and barefoot walking of healthy individuals without previous training. These variables were compared in 25 female subjects and gait conditions were compared using ANOVA repeated measures (effect size:0.25). Walking with the MBT shoe in this non-instructed condition produced higher vertical forces (first vertical peak and weight acceptance rate) than walking with a standard shoe or walking barefoot, which suggests an increase in the loads received by the musculoskeletal system, especially at heel strike. Walking with the MBT shoe did not increase muscle activity when compared to walking with the standard shoe. The barefoot condition was more effective than the MBT shoe at enhancing muscle activation. Therefore, in healthy individuals, no advantage was found in using the MBT over a standard tennis shoe without a special training period. Further studies using the MBT without any instruction over a longer period are needed to evaluate if the higher loads observed in the present study would return to their baseline values after a period of adaptation, and if the muscle activity would increase over time. (C) 2012 Elsevier B.V. All rights reserved.

Science and Society: The Case of Acceptance of Newtonian Optics in the Eighteenth Century

The present paper presents a historical study on the acceptance of Newton's corpuscular theory of light in the early eighteenth century. Isaac Newton first published his famous book Opticks in 1704. After its publication, it became quite popular and was an almost mandatory presence in cultural life of Enlightenment societies. However, Newton's optics did not become popular only via his own words and hands, but also via public lectures and short books with scientific contents devoted to general public (including women) that emerged in the period as a sort of entertainment business. Lectures and writers stressed the inductivist approach to the study of nature and presented Newton's ideas about optics as they were consensual among natural philosophers in the period. The historical case study presented in this paper illustrates relevant aspects of nature of science, which can be explored by students of physics on undergraduate level or in physics teacher training programs.

One and two degrees-of-freedom Vortex-Induced Vibration experiments with yawed cylinders

Vortex-Induced Vibration (VIV) experiments were carried out with yawed cylinders. The purpose was to investigate the validity of the Independence Principle (IP) for properly describing the flow characteristics and the dynamics of structures subjected to oblique flow. Five yaw angles in relation to the direction perpendicular to the free stream velocity were tested, namely View the MathML sourceθ=0°,10°,20°,30° and 45°. Both the upstream and downstream orientations were tested. The models were mounted on a leaf spring apparatus that allows experiments with one or two degrees of freedom. The Reynolds numbers based on the component normal to the cylinder axis fell in the interval 3×103forces were acquired. Considering only the component of the free stream which is normal to the cylinder axis, the results of amplitude and force coefficients agreed reasonably well with the non-yawed ones for yaw angles up to 20° for both one and two degrees-of-freedom experiments. This indicates the validity of the IP for this yaw angle range. For yaw angles larger than 20°, a decrease in the maximum amplitude was observed. The decrease in the oscillation amplitudes was related to a larger modulation in the phase shift between force and displacement. Differences in the results for upstream and downstream were observed and were more evident for the larger yaw angle. These differences can be associated to the asymmetric cylinder end conditions.

Preserve and protect in a science museum

Reflections on the university campus usually focus on its relevancy as a research and teaching area; however, the need for preservation, protection, maintenance and cleaning only become visible in the event of inadequacy or lack thereof. The aim of this study is to address the characteristics of the preservation and security measures performed at the Science and Technology Park of the University of São Paulo (Parque de Ciência e Tecnologia da Universidade de São Paulo), agency subjected to the Dean’s Office for Culture and University Extension (Pró-Reitoria de Cultura e Extensão Universitária). Because of its history and location, the Park requires special care. The Park’s land formerly housed the Astronomical Observatory of São Paulo and the Institute of Astronomy and Geophysics of the University of São Paulo (Instituto de Astronomia e Geofísica – IAG-USP), within the Fontes do Ipiranga State Park (Parque Estadual das Fontes do Ipiranga – PEFI), in the city of São Paulo. Preservation and reconversion activities relative to historical buildings are developed at the Park. The institution’s location and its specificities require security in its borders, as well as in relation to the users of the park.

Den utvärdera(n)de staten : Utvärderingens institutionalisering på den högre utbildningens område

In recent years evaluation has become a very important element in the public administration. The Swedish state administration to a significant extent both evaluates and is evaluated. This means that the evaluating state is at the same time the evaluated state. In this dissertation the institutionalization of evaluation is studied in a field within which this development has been particularly lively and interesting, namely the field of higher education. The dissertation focuses on evaluation activity that has been carried out in conjunction with central public authorities within higher education: the Office of the Chancellor of the Universities and Colleges in Sweden, the National Swedish Board of Universities and Colleges, and the Office of the University Chancellor, and encompasses the period 1964-1995. A newly revived research tradition within political science – historical institutionalism – is used as a perspective and a methodology. Since the application of this tradition has not yet been fully tested, another purpose is to examine the practical utility of this analytical tool and the kind of knowledge that it produces. The dissertation thereby combines the fields of education policy, evaluation research and institutional theory. The beginning of the institution has been dated to the end of the 1960s and beginning of the 1970s. In the dissertation the forces behind the initiation of the institution are taken up. Events and developments in the field that have influenced the further development of the institution have been identified and analyzed. Developments reveal that the institution has been stable during the entire period of time under study, despite some changes. The use of historical institutionalism as a perspective and methodology has proven satisfactory on a general level. However, special solutions have been required as problems and ambiguities have arisen. The dissertation concludes with reflections on the practical utility of historical institutionalism in political science research.

Scienza, Tecnica, Politica: Il Problema del Metodo nel Pensiero di Jacopo Aconcio

The aim of this PhD thesis is to study accurately and in depth the figure and the literary production of the intellectual Jacopo Aconcio. This minor author of the 16th century has long been considered a sort of “enigmatic character”, a profile which results from the work of those who, for many centuries, have left his writing to its fate: a story of constant re-readings and equally incessant oversights. This is why it is necessary to re-read Aconcio’s production in its entirety and to devote to it a monographic study. Previous scholars’ interpretations will obviously be considered, but at the same time an effort will be made to go beyond them through the analysis of both published and manuscript sources, in the attempt to attain a deeper understanding of the figure of this man, who was a Christian, a military and hydraulic engineer and a political philosopher,. The title of the thesis was chosen to emphasise how, throughout the three years of the doctorate, my research concentrated in equal measure and with the same degree of importance on all the reflections and activities of Jacopo Aconcio. My object, in fact, was to establish how and to what extent the methodological thinking of the intellectual found application in, and at the same time guided, his theoretical and practical production. I did not mention in the title the author’s religious thinking, which has always been considered by everyone the most original and interesting element of his production, because religion, from the Reformation onwards, was primarily a political question and thus it was treated by almost all the authors involved in the Protestant movement - Aconcio in the first place. Even the remarks concerning the private, intimate sphere of faith have therefore been analysed in this light: only by acknowledging the centrality of the “problem of politics” in Aconcio’s theories, in fact, is it possible to interpret them correctly. This approach proves the truth of the theoretical premise to my research, that is to say the unity and orderliness of the author’s thought: in every field of knowledge, Aconcio applies the rules of the methodus resolutiva, as a means to achieve knowledge and elaborate models of pacific cohabitation in society. Aconcio’s continuous references to method can make his writing pedant and rather complex, but at the same time they allow for a consistent and valid analysis of different disciplines. I have not considered the fact that most of his reflections appear to our eyes as strongly conditioned by the time in which he lived as a limit. To see in him, as some have done, the forerunner of Descartes’ methodological discourse or, conversely, to judge his religious theories as not very modern, is to force the thought of an author who was first and foremost a Christian man of his own time. Aconcio repeats this himself several times in his writings: he wants to provide individuals with the necessary tools to reach a full-fledged scientific knowledge in the various fields, and also to enable them to seek truth incessantly in the religious domain, which is the duty of every human being. The will to find rules, instruments, effective solutions characterizes the whole of the author’s corpus: Aconcio feels he must look for truth in all the arts, aware as he is that anything can become science as long as it is analysed with method. Nevertheless, he remains a man of his own time, a Christian convinced of the existence of God, creator and governor of the world, to whom people must account for their own actions. To neglect this fact in order to construct a “character”, a generic forerunner, but not participant, of whatever philosophical current, is a dangerous and sidetracking operation. In this study, I have highlighted how Aconcio’s arguments only reveal their full meaning when read in the context in which they were born, without depriving them of their originality but also without charging them with meanings they do not possess. Through a historical-doctrinal approach, I have tried to analyse the complex web of theories and events which constitute the substratum of Aconcio’s reflection, in order to trace the correct relations between texts and contexts. The thesis is therefore organised in six chapters, dedicated respectively to Aconcio’s biography, to the methodological question, to the author’s engineering activity, to his historical knowledge and to his religious thinking, followed by a last section concerning his fortune throughout the centuries. The above-mentioned complexity is determined by the special historical moment in which the author lived. On the one hand, thanks to the new union between science and technique, the 16th century produces discoveries and inventions which make available a previously unthinkable number of notions and lead to a “revolution” in the way of studying and teaching the different subjects, which, by producing a new form of intellectual, involved in politics but also aware of scientific-technological issues, will contribute to the subsequent birth of modern science. On the other, the 16th century is ravaged by religious conflicts, which shatter the unity of the Christian world and generate theological-political disputes which will inform the history of European states for many decades. My aim is to show how Aconcio’s multifarious activity is the conscious fruit of this historical and religious situation, as well as the attempt of an answer to the request of a new kind of engagement on the intellectual’s behalf. Plunged in the discussions around methodus, employed in the most important European courts, involved in the abrupt acceleration of technical-scientific activities, and especially concerned by the radical religious reformation brought on by the Protestant movement, Jacopo Aconcio reflects this complex conjunction in his writings, without lacking in order and consistency, differently from what many scholars assume. The object of this work, therefore, is to highlight the unity of the author’s thought, in which science, technique, faith and politics are woven into a combination which, although it may appear illogical and confused, is actually tidy and methodical, and therefore in agreement with Aconcio’s own intentions and with the specific characters of European culture in the Renaissance. This theory is confirmed by the reading of the Ars muniendorum oppidorum, Aconcio’s only work which had been up till now unavailable. I am persuaded that only a methodical reading of Aconcio’s works, without forgetting nor glorifying any single one, respects the author’s will. From De methodo (1558) onwards, all his writings are summae, guides for the reader who wishes to approach the study of the various disciplines. Undoubtedly, Satan’s Stratagems (1565) is something more, not only because of its length, but because it deals with the author’s main interest: the celebration of doubt and debate as bases on which to build religious tolerance, which is the best method for pacific cohabitation in society. This, however, does not justify the total centrality which the Stratagems have enjoyed for centuries, at the expense of a proper understanding of the author’s will to offer examples of methodological rigour in all sciences. Maybe it is precisely because of the reforming power of Aconcio’s thought that, albeit often forgotten throughout the centuries, he has never ceased to reappear and continues to draw attention, both as a man and as an author. His ideas never stop stimulating the reader’s curiosity and this may ultimately be the best demonstration of their worth, independently from the historical moment in which they come back to the surface.

Interactive simulation of flexible parts

Computer simulations play an ever growing role for the development of automotive products. Assembly simulation, as well as many other processes, are used systematically even before the first physical prototype of a vehicle is built in order to check whether particular components can be assembled easily or whether another part is in the way. Usually, this kind of simulation is limited to rigid bodies. However, a vehicle contains a multitude of flexible parts of various types: cables, hoses, carpets, seat surfaces, insulations, weatherstrips... Since most of the problems using these simulations concern one-dimensional components and since an intuitive tool for cable routing is still needed, we have chosen to concentrate on this category, which includes cables, hoses and wiring harnesses. In this thesis, we present a system for simulating one dimensional flexible parts such as cables or hoses. The modeling of bending and torsion follows the Cosserat model. For this purpose we use a generalized spring-mass system and describe its configuration by a carefully chosen set of coordinates. Gravity and contact forces as well as the forces responsible for length conservation are expressed in Cartesian coordinates. But bending and torsion effects can be dealt with more effectively by using quaternions to represent the orientation of the segments joining two neighboring mass points. This augmented system allows an easy formulation of all interactions with the best appropriate coordinate type and yields a strongly banded Hessian matrix. An energy minimizing process accounts for a solution exempt from the oscillations that are typical of spring-mass systems. The use of integral forces, similar to an integral controller, allows to enforce exactly the constraints. The whole system is numerically stable and can be solved at interactive frame rates. It is integrated in the DaimlerChrysler in-house Virtual Reality Software veo for use in applications such as cable routing and assembly simulation and has been well received by users. Parts of this work have been published at the ACM Solid and Physical Modeling Conference 2006 and have been selected for the special issue of the Computer-Aided-Design Journal to the conference.