1000 resultados para Solubilização de parafinas. Equilíbrio sólido-líquido. Modelagem.Simulação
Resumo:
Activated carbon was produced from the water hyacinth (CAA) by impregnation with ZnCl2 (1:2), followed by pyrolysis at 700 ºC, under N2. CAA was used for the adsorption of phenol, m-cresol and o-cresol from aqueous solutions, using batch adsorption. The effects of contact time, pH, temperature and concentration on sorption were investigated. Adsorption capacity, calculated using the Langmuir model proved to be dependent on temperature, reaching values of 163.7, 130.2 and 142.3 mg g-1 for phenol, m-cresol and o-cresol, respectively, at 45 ºC. Thermodynamic data at the solid-liquid interface suggests an endothermic, spontaneous and environmentally-friendly process.
Resumo:
Filamentous fungi were cultured under solid state fermentation of soybean residues to produce lipases. Enzymes produced by Aspergillus niger esterified oleic and butyric acids in the presence of ethanol, while enzymes produced by Aspergillus fumigatus demonstrated no esterification activity toward lauric acid. In case of A. niger, direct lyophilization of fermented bran led to higher esterification activity. The esterification of oleic acid by enzymes of A. fumigatus was neither influenced by pH adjustment nor by the extraction process. Conversions to ethyl esters were higher after pH adjustment with lyophilized liquid extract of A. niger.
Resumo:
In this work, a novel device based on polyacrylamide (PAAm) hydrogels and KL - DeOH - H2O lyotropic liquid crystal (LLC), with potential for application as Polymer Dispersed Liquid Crystals (PDLC), was proposed and its properties characterized. The confinement of LLC promoted significant changes in spectroscopic, morphological, optical, hydrophilic, structural and mechanical properties due to the interaction between the LLC-PAAm matrix and entropic parameter changes. The mechanical and structural properties can be controlled by adjusting AAm, temperature and presence of LLC, which can be useful for technological applications of these systems in optical devices.
Resumo:
The aim of this paper was to present a simple and fast way of simulating Nuclear Magnetic Resonance signals using the Bloch equations. These phenomenological equations describe the classical behavior of macroscopic magnetization and are easily simulated using rotation matrices. Many NMR pulse sequences can be simulated with this formalism, allowing a quantitative description of the influence of many experimental parameters. Finally, the paper presents simulations of conventional sequences such as Single Pulse, Inversion Recovery, Spin Echo and CPMG.
Resumo:
Educational institutions are not being effective, because they do not give individuals what they need to integrate into postmodern society, nor produce citizens that postmodern society needs. Shortcomings include the scientific literacy and cognitive domain levels attained, with an aggravating waning interest in science among pre-university students. We present an inquiry module, an inquiry dynamic, as an education resource for the study of perturbations of a chemical equilibrium state by pre-university or university students of basic chemistry, to contribute to the relevance and popularity of science, potentiation of science literacy and development of cognition. Here we describe an investigation with pre-university students.
Resumo:
This paper describes the evaluation of simple and fast solubilization methods for the determination of Ca, Mg, and K in glycerin samples from biodiesel production by atomic spectrometry. The solubilization in water was compared with two other methods: solubilization in formic acid and solubilization in ethanol. Using solubilization in water, determination of the three analytes was possible; the values of limits of detection for Ca, K, Mg were 0.31, 0.06, and 0.16 mg kg−1, respectively. Because no adequate reference material was available, the accuracy was evaluated by assessing the recoveries tests with both solubilization methods; the evaluation ranged from 90% to 115%, with values of relative standard deviation >8%, indicating good accuracy of the measure. Four crude glycerin samples obtained from biodiesel plants of Rio Grande do Sul were analyzed after treatment with the different methods of solubilization, and the obtained results of Ca, Mg, and K concentration were in agreement with the values obtained from both solubilization methods. Therefore, solubilization in water is concluded to be a simpler, faster, and viable method for sample preparation of glycerin.
Resumo:
We briefly investigated the well-known correlation of trihalomethanes, present in fresh water, with cancer hazard in humans. A transient alternative method of chemical simulation using Bäcklund Transformations and Quantum Mechanics is presented. Finally, the method was applied to simulate the interaction between Trichloridemethane and Alanine - as well as its amino and carboxyl groups.
Resumo:
AbstractA device comprising a lab-made chamber with mechanical stirring and computer-controlled solenoid valves is proposed for the mechanization of liquid-liquid extractions. The performance was demonstrated by the extraction of ethanol from biodiesel as a model of the extraction of analytes from organic immiscible samples to an aqueous medium. The volumes of the sample and extractant were precisely defined by the flow-rates and switching times of the valves, while the mechanic stirring increased interaction between the phases. Stirring was stopped for phase separation, and a precise time-control also allowed a successful phase separation (i.e., the absence of the organic phase in the aqueous extract). In the model system, a linear response between the analytical response and the number of extractions was observed, indicating the potential for analyte preconcentration in the extract. The efficiency and reproducibility of the extractions were demonstrated by recoveries of ethanol spiked to biodiesel samples within 96% and 100% with coefficients of variation lower than 3.0%.
Resumo:
The objective of this work is to demonstrate the efficient utilization of the Principal Components Analysis (PCA) as a method to pre-process the original multivariate data, that is rewrite in a new matrix with principal components sorted by it's accumulated variance. The Artificial Neural Network (ANN) with backpropagation algorithm is trained, using this pre-processed data set derived from the PCA method, representing 90.02% of accumulated variance of the original data, as input. The training goal is modeling Dissolved Oxygen using information of other physical and chemical parameters. The water samples used in the experiments are gathered from the Paraíba do Sul River in São Paulo State, Brazil. The smallest Mean Square Errors (MSE) is used to compare the results of the different architectures and choose the best. The utilization of this method allowed the reduction of more than 20% of the input data, which contributed directly for the shorting time and computational effort in the ANN training.
Resumo:
Calus foram obtidos de tomateiro (Lycopersicon esculentum), cafeeiro (Coffea arabica), alfafa (Medicago sativa), orquídea (Dendrobium nobile), mostarda (Brassica rapa), batata doce (Ipomoea batatas), fumo (Nicotiana tabacum), cenoura (Daucus carota) e Crotalaria juncea em meio sólido de Murashige & Skoog (MS) seguido do cultivo em meio líquido MS em temperatura de 25-28 ºC. Após um mês, a suspensão foi passada em membrana Millipore 0,22 µm, obtendo-se, assim, o exsudato da cultura de células de cada planta testada. Ovos ou juvenis de segundo estádio (J2) de Meloidogyne incognita foram incubados nesses exsudatos e avaliadas as percentagens de eclosão, mobilidade e mortalidade dos J2. Com exceção dos ovos incubados em exsudato de orquídea, todos os demais inibiram a eclosão quando comparados com a incubação em água (testemunha). Entretanto, nos exsudatos de L. esculentum, cafeeiro e C. juncea a inibição foi mais drástica, semelhante ao aldicarb, mas significativamente diferente e menor do que em soluções contendo ingredientes do meio MS (1-5). Todos os exsudatos reduziram a mobilidade e aumentaram a mortalidade, com maior intensidade em 24 h de exposição. Porém, maior redução na mobilidade ocorreu nos exsudatos de tomateiro e alfafa, enquanto maior mortalidade no exsudato de tomateiro, seguido pelo de mostarda.
Resumo:
Dez filtrados de culturas de actinomicetos causaram redução na motilidade e 100% de mortalidade de J2 de Meloidogyne javanica. A diluição de alguns causou redução de 75 a 85% de mortalidade. Contudo, o filtrado do isolado PIC 1 causou, mesmo em diluição, 100% de mortalidade. Alguns filtrados reduziram a motilidade sem causar mortalidade. Dos isolados que causaram mortalidade também reduziram eclosão de J2. Entretanto, a porcentagem de redução variou ao longo do período de crescimento do actinomiceto em meio líquido. Exsudatos obtidos de colônias de alguns isolados de actinomicetos crescidos em meio sólido causaram 100% de mortalidade e redução na motilidade de J2 de M. javanica. Os isolados de actinomicetos ALF 4 e QUI 4 produziram substâncias tóxicas a J2 tanto em filtrado quanto em exsudato de colônia.
Resumo:
O chorume líquido de suínos (CLS) pode ser utilizado como fonte de nutrientes e de matéria orgânica para algumas culturas agrícolas e interferir na ocorrência de doenças de plantas, causadas por fitopatógenos habitantes do solo. Assim, foi estudado o efeito do CLS, sobre as doenças do feijoeiro (Phaseolus vulgaris) causadas por Sclerotium rolfsii. Em parcelas de 1 m², foi incorporado o CLS nas doses equivalentes a 0, 20, 40, 60 e 80 m³ ha-1. O solo foi infestado dois meses antes da aplicação do CLS, com 100 g do substrato (arroz em casca) colonizado pelo patógeno. A semeadura de 80 sementes de feijão por parcela foi efetuada em dois cultivos sucessivos, 1 dia e 45 dias após a aplicação do CLS. A intensidade da doença foi avaliada através da emergência, estande final de plântulas e severidade da doença, nos dois cultivos, sendo que a atividade microbiana, a concentração de amônia na camada superficial do solo e os níveis de fertilidade foram avaliados apenas no segundo cultivo. Com o aumento das doses de CLS foi verificada a redução da intensidade da doença e, entre as características avaliadas, o aumento da atividade microbiana, da concentração de amônia e dos níveis de cobre e zinco são os que melhor explicam essa redução.
Resumo:
As temperaturas onde ocorre a solubilização da fase rica em prata, em ligas de Cu-Al-Ag, foram determinadas através de medidas de variação da resistência elétrica com a temperatura. As derivadas das curvas obtidas experimentalmente permitiram determinar com precisão essas temperaturas e também que se traçasse um esboço da região onde ocorre a transição monofásica para bifásica.
Resumo:
No presente trabalho avaliou-se as etapas de decomposição térmica de alguns compostos de lantanídeos (III) e ítrio (III), envolvendo diferentes ligantes fenil substituído derivados do benzalpiruvato, utilizando-se a termogravimetria (TG). Uma correlação foi realizada a partir dos teores dos íons metálicos, comparando-se os resultados obtidos por termogravimetria e titulação complexométrica com EDTA.
Resumo:
Em geral, os modelos de crescimento empregados na descrição de processos cinéticos do estado sólido utilizam as funções de Morgan-Mercer-Flodin (MMF) e Johnson-Mehl-Avrami (JMA). Neste trabalho comparou-se o comportamento das estimativas dos parâmetros dessas funções, em duas parametrizações, quando ajustadas aos dados experimentais de variação isotérmica da microdureza da liga Cu-3%Al-5%Ag com o tempo de envelhecimento, em cinco temperaturas diferentes. Na estimativa dos parâmetros aplicou-se o método dos mínimos quadrados à função linearizada do modelo e para o refinamento da solução, os procedimentos da regressão não linear. Foram obtidas as distribuições de freqüências das estimativas dos parâmetros, por simulação, e determinados seus erros relativos. Observou-se que, em uma das parametrizações das funções, a estimativa do parâmetro cinético apresentou maior estabilidade. Apesar dessas funções serem anteriormente consideradas distintas, verificou-se que a função de MMF é uma aproximação da função de JMA, sendo que esta, com a parametrização adequada, é a mais indicada para descrever o processo cinético considerado.