Monitoring of noninvasive ventilation by built-in software of home bilevel ventilators: a bench study.

BACKGROUND: Current bilevel positive-pressure ventilators for home noninvasive ventilation (NIV) provide physicians with software that records items important for patient monitoring, such as compliance, tidal volume (Vt), and leaks. However, to our knowledge, the validity of this information has not yet been independently assessed. METHODS: Testing was done for seven home ventilators on a bench model adapted to simulate NIV and generate unintentional leaks (ie, other than of the mask exhalation valve). Five levels of leaks were simulated using a computer-driven solenoid valve (0-60 L/min) at different levels of inspiratory pressure (15 and 25 cm H(2)O) and at a fixed expiratory pressure (5 cm H(2)O), for a total of 10 conditions. Bench data were compared with results retrieved from ventilator software for leaks and Vt. RESULTS: For assessing leaks, three of the devices tested were highly reliable, with a small bias (0.3-0.9 L/min), narrow limits of agreement (LA), and high correlations (R(2), 0.993-0.997) when comparing ventilator software and bench results; conversely, for four ventilators, bias ranged from -6.0 L/min to -25.9 L/min, exceeding -10 L/min for two devices, with wide LA and lower correlations (R(2), 0.70-0.98). Bias for leaks increased markedly with the importance of leaks in three devices. Vt was underestimated by all devices, and bias (range, 66-236 mL) increased with higher insufflation pressures. Only two devices had a bias < 100 mL, with all testing conditions considered. CONCLUSIONS: Physicians monitoring patients who use home ventilation must be aware of differences in the estimation of leaks and Vt by ventilator software. Also, leaks are reported in different ways according to the device used.

Legal Issues for FOSS-based Supply Chain Management ¿ Black Duck Software

Open source is typically outside of normal commercial software procurement processes.The Challenges.Increasingly diverse and distributed set of development resources.Little/no visibility into the origins of the software.Supply Chain Comparison: Hardware vs Software.Open source has revolutionized the mobile and device landscape, other industries will follow.Supply chain management techniques from hardware are useful for managing software.SPDX A standard format for communicating a software Bill of Materials across the supply chain.Effective management and control requires training, tools, processes and standards.

Open Source Software : the Intersection of IP and Security in Open Source

The use of open source software continues to grow on a daily basis. Today, enterprise applications contain 40% to 70% open source code and this fact has legal, development, IT security, risk management and compliance organizations focusing their attention on its use, as never before. They increasingly understand that the open source content within an application must be detected. Once uncovered, decisions regarding compliance with intellectual property licensing obligations must be made and known security vulnerabilities must be remediated. It is no longer sufficient from a risk perspective to not address both open source issues.

Free Open Source Software and Dual-Use: Loophole or Dissent?

The Free Open Source Software (FOSS) seem far from the military field but in some cases, some technologies normally used for civilian purposes may have military applications. These products and technologies are called dual-use. Can we manage to combine FOSS and dual-use products? On one hand, we have to admit that this kind of association exists - dual-use software can be FOSS and many examples demonstrate this duality - but on the other hand, dual-use software available under free licenses lead us to ask many questions. For example, the dual-use export control laws aimed at stemming the proliferation of weapons of mass destruction. Dual-use export in United States (ITAR) and Europe (regulation 428/2009) implies as a consequence the prohibition or regulation of software exportation, involving the closing of source code. Therefore, the issues of exported softwares released under free licenses arises. If software are dual-use goods and serve for military purposes, they may represent a danger. By the rights granted to licenses to run, study, redistribute and distribute modified versions of the software, anyone can access the free dual-use software. So, the licenses themselves are not at the origin of the risk, it is actually linked to the facilitated access to source codes. Seen from this point of view, it goes against the dual-use regulation which allows states to control these technologies exportation. For this analysis, we will discuss about various legal questions and draft answers from either licenses or public policies in this respect.

Lysine and arginine requirements of Salminus brasiliensis

The objective of this work was to determine the dietary lysine (DL) and dietary arginine (DA) requirements of dourado (Salminus brasiliensis), through dose-response trials using the amino acid profiles of whole carcasses as a reference. Two experiments were carried out in a completely randomized design (n=4). In the first experiment, groups of 12 feed-conditioned dourado juveniles (11.4±0.2 g) were stocked in 60 L cages placed in 300 L plastic indoor tanks in a closed circulation system. Fish were fed for 60 days on diets containing 1.0, 1.5, 2.0, 2.5, 3.0, or 3.5 % dietary lysine. In the second experiment, dourado juveniles (27.0±0.8 g) were fed for 60 days on semipurified diets containing arginine at 1.0, 1.5, 2.0, 2.5 or 3.0%, in similar conditions to those of the first experiment. Optimal DL requirements, as determined by broken-line analysis method for final weight, weight gain and specific growth rate, were 2.15% DL or 5% lysine in dietary protein, and 1.48% DA or 3.43% arginine in dietary protein. The best feed conversion ratio is attained with 2.5% DL or 5.8% lysine in dietary protein and 1.4% DA or 3.25% arginine in dietary protein.

Materiaalitietokanta prosessilaitetoimituksen laitevalintojen tukena

In this master's thesis, material characteristics which includes material database will be developed, through which will be managed process device deliveries device selections. The analysed bulk materials exact values serve as basic data when choosing glass- and dried product industry raw material equipment solutions. In this study, the material database function structure will be divided into classified bulk materials characteristics and process device guidelines and planning which they are based on. In order to achieve the best possible advantage in use of the material database, the raw material handling with the process equipment has to be controlled with the help of database bulk material information. With the help of material database, the personnel of the company will find the needed material and device information to implement the processes. The structure of the database enables adding of information, and hence the database will be always kept updated. The material database uses free PhpOpenDatabase software programme, which adapts itself flexibly with the software and requirements of the company. The material frame and considered features of the material database were determined by the requirements of the company's device technology. National and international classifications were used as help. The collected material information was analysed and the correspondence between internal study results and found classifications were determined. As presented before, on the grounds of chosen and specified material features, also the controllability of device selecting and solutions was improved with device-specific screening and planning guidelines. As material frame of the material database was chosen ANSI/CEMA Standard 550. Its almost 1000 bulk materials form an extensive database frame. Over 600 of these raw materials have been determined according to classification. However, the most important ones are the materials of glass- and dried material plants, which consist of the last part of material frame. The analysis will be sustained and material information will be completed primarily of material part with test run in one's own material laboratory.

Smart antennas in software radio base stations

The application of adaptive antenna techniques to fixed-architecture base stations has been shown to offer wide-ranging benefits, including interference rejection capabilities or increased coverage and spectral efficiency.Unfortunately, the actual implementation ofthese techniques to mobile communication scenarios has traditionally been set back by two fundamental reasons. On one hand, the lack of flexibility of current transceiver architectures does not allow for the introduction of advanced add-on functionalities. On the other hand, theoften oversimplified models for the spatiotemporal characteristics of the radio communications channel generally give rise toperformance predictions that are, in practice, too optimistic. The advent of software radio architectures represents a big step toward theintroduction of advanced receive/transmitcapabilities. Thanks to their inherent flexibilityand robustness, software radio architecturesare the appropriate enabling technology for theimplementation of array processing techniques.Moreover, given the exponential progression ofcommunication standards in coexistence andtheir constant evolution, software reconfigurabilitywill probably soon become the only costefficientalternative for the transceiverupgrade. This article analyzes the requirementsfor the introduction of software radio techniquesand array processing architectures inmultistandard scenarios. It basically summarizesthe conclusions and results obtained withinthe ACTS project SUNBEAM,1 proposingalgorithms and analyzing the feasibility ofimplementation of innovative and softwarereconfigurablearray processing architectures inmultistandard settings.

Software Process Modeling with Eclipse Process Framework

The software development industry is constantly evolving. The rise of the agile methodologies in the late 1990s, and new development tools and technologies require growing attention for everybody working within this industry. The organizations have, however, had a mixture of various processes and different process languages since a standard software development process language has not been available. A promising process meta-model called Software & Systems Process Engineering Meta- Model (SPEM) 2.0 has been released recently. This is applied by tools such as Eclipse Process Framework Composer, which is designed for implementing and maintaining processes and method content. Its aim is to support a broad variety of project types and development styles. This thesis presents the concepts of software processes, models, traditional and agile approaches, method engineering, and software process improvement. Some of the most well-known methodologies (RUP, OpenUP, OpenMethod, XP and Scrum) are also introduced with a comparison provided between them. The main focus is on the Eclipse Process Framework and SPEM 2.0, their capabilities, usage and modeling. As a proof of concept, I present a case study of modeling OpenMethod with EPF Composer and SPEM 2.0. The results show that the new meta-model and tool have made it possible to easily manage method content, publish versions with customized content, and connect project tools (such as MS Project) with the process content. The software process modeling also acts as a process improvement activity.

Monipolttoainekattilan päästöjen tarkkailu ja raportointi

Suurten polttolaitosten päästöjen tarkkailu- ja raportointivaatimukset ovat uudistuneet viime vuosina paljon. Suurimpia muutosten aiheuttajia ovat Valtioneuvoston asetus 1017/2002 ja standardi EN-14181. Tässä työssä kuvataan uudet vaatimukset täyttävän päästöjen tarkkailu- ja raportointijärjestelmän rakentaminen monipolttoainekattilalle. Aluksi esitellään mitä uusia vaatimuksia päästöjen tarkkailulle ja raportoinnille on tullut viime aikoina. Lisäksi selvitetään vaatimusten mahdolliset ristiriidat ja ristiriitatilanteiden ratkaisutavat. Seuraavaksi esitellään vaatimukset täyttävän järjestelmän määritelmät. Erityisestiselvitetään kattilan erityispiirteiden vaatimia ratkaisuja. Lopuksi esitellään päästöjen tarkkailu- ja raportointijärjestelmän käyttökokemuksia ja parantamismahdollisuuksia. Kaikki tarkastelut tehdään ensisijaisesti toiminnanharjoittajan näkökulmasta. Järjestelmä toteutettiin Stora Enso Oyj:n Heinolan Flutingtehtaan voimalaitoksen pääkattilalle, jossa käytetään laajaa polttoainevalikoimaa. Toteutuspaikan valinta tehtiin sillä perusteella, että uudet päästöjen tarkkailu- ja raportointivaatimukset ovat erityisen haasteellisia monipolttoainekattiloiden tapauksessa. Työssä selvitetään järjestelmän soveltamismahdollisuuksia myös kahdella muulla Stora Enson tehtaalla. Käyttöönottovaiheen johtopäätöksenä todettiin päästöjen tarkkailu- ja raportointijärjestelmän täyttävän sille asetetut vaatimukset. Lisäksi havaittiin, että toiminnanharjoittajan kannattaa panostaa erityisesti järjestelmän joustavuuteen, luotettavuuteen, helppokäyttöisyyteen ja vikasietoisuuteen. Toiminnanharjoittaja pystyy määrittelyvaiheessa vaikuttamaan järjestelmän ominaisuuksiin helpommin ja edullisemmin kuin käyttöönoton jälkeen. Toiminnanharjoittajalta vaadittu työtuntimäärä arvioitiin Heinolan Flutingtehtaan tapauksen perusteella. Lopuksi selvitettiin mahdollisia tulevaisuuden kehityskohteita vastaavissa järjestelmissä.

Dynamic Runtime Variation and Branding in S60 Software

Diplomityössä tutkitaan keinoja brändätä ja varioida S60-ohjelmistoja dynaamisesti ja ajonaikaisesti. S60 on kehitysalusta, jota käyttävät useat puhelinvalmistajat ja heidän puhelimiaan käyttävät lukuisat eri operaattorit. Operaattorit haluavat puhelimiensa tai osan puhelimen sovelluksista erottuvan kilpailijoista heidän omalla brändillään ja tämän takia täytyy olla keinot joko koko puhelimen, tai valittujen sovellusten brändäykselle. Osa sovelluksista saatetaan haluta vaihtavan käytettyä brändiä sen käyttämien resurssien, kuten verkkopalvelimen, mukaan. Variointidataa tulee myös pystyä jakamaan eri sovellusten tai sovellusten osien kesken. Työssä esitellään Symbian käyttöjärjestelmä ja S60 kehitysympäristö, sekä pohditaan Symbianin turvallisuuskäytäntöjen tuomia haasteita variointidatan jakamiseen eri sovellusten välillä. Olemassaolevia variointitapoja tutkitaan työn mahdolliseksi pohjaksi. Työ sisältää esittelyn projektista, jossa kehitettiin erään S60 sovelluksen dynaaminen brändäystoteutus, joka myös mahdollistaa variointidatan jakamisen eri sovellusten kanssa.

Evaluation of performance analysis software for Linux computing cluster

Tietokonejärjestelmän osien ja ohjelmistojen suorituskykymittauksista saadaan tietoa,jota voidaan käyttää suorituskyvyn parantamiseen ja laitteistohankintojen päätöksen tukena. Tässä työssä tutustutaan suorituskyvyn mittaamiseen ja mittausohjelmiin eli ns. benchmark-ohjelmistoihin. Työssä etsittiin ja arvioitiin eri tyyppisiä vapaasti saatavilla olevia benchmark-ohjelmia, jotka soveltuvat Linux-laskentaklusterin suorituskyvynanalysointiin. Benchmarkit ryhmiteltiin ja arvioitiin testaamalla niiden ominaisuuksia Linux-klusterissa. Työssä käsitellään myös mittausten tekemisen ja rinnakkaislaskennan haasteita. Benchmarkkeja löytyi moneen tarkoitukseen ja ne osoittautuivat laadultaan ja laajuudeltaan vaihteleviksi. Niitä on myös koottu ohjelmistopaketeiksi, jotta laitteiston suorituskyvystä saisi laajemman kuvan kuin mitä yhdellä ohjelmalla on mahdollista saada. Olennaista on ymmärtää nopeus, jolla dataa saadaan siirretyä prosessorille keskusmuistista, levyjärjestelmistä ja toisista laskentasolmuista. Tyypillinen benchmark-ohjelma sisältää paljon laskentaa tarvitsevan matemaattisen algoritmin, jota käytetään tieteellisissä ohjelmistoissa. Benchmarkista riippuen tulosten ymmärtäminen ja hyödyntäminen voi olla haasteellista.

Release Process Effectiveness - Case of Operating Room Management Software

Työn päätavoitteena oli tuoda esiin tärkeimmät julkistamisprosessin tehokkuuteen vaikuttavat tekijät. Tutkimuksessa tarkasteltiin aihetta julkistamisprojektien vetäjän näkökulmasta. Kirjallinen selvitys kattaa keskeisimmät ohjelmistoprosessin, palvelun laadun sekä projektihallinnan teoriat. Kokeellisena aineistona käytettiin asiakkailta ja myynnin sekä käyttöönoton organisaatioilta tullutta palautetta ja asiantuntijahaastatteluita. Case-tuotteena tarkasteltiin suuren kansainvälisen yrityksen jälleenmyymää leikkaussalihallinnan ohjelmistoa. Tärkeimpiä julkistamisprosessin tehokkuuteen vaikuttavia tekijöitä ovat tiekartan ja julkistamispakettien sisällön hallinta, projektin aikataulujen pitäminen, rehellinen ja nopea kommunikaatio myyntikanavaan ja asiakkaille, sekä hyvin toteutettu testaus. Työssä käydään läpi esimerkkistrategioita kehittymiseen näillä alueilla.

Pollination requirements of seeded and seedless mini watermelon varieties cultivated under protected environment

The objective of this work was to evaluate the floral biology and pollination requirements of seeded and seedless mini watermelon varieties, and to determine the best varieties to cultivate under protected environment. Three seedless (HA-5106, HA-5158, and HA-5161) and two seeded (Minipol and Polimore) genotypes were tested. Flowers were monitored from the pre-anthesis stage to senescence, and fruit quality was also evaluated. The evaluated treatments were hand-geitonogamous pollination (MG), cross-pollination with pollen from the Polimore variety (MCP), cross-pollination with pollen from the Minipol variety (MCM), and restricted pollination. All varieties had monoecious plants with diclinous flowers, and the stigmas remained receptive throughout anthesis. Fruit set rates of 84.62% (MG), 61.54% (MCP), 48% (MCM), and 0% (restricted) were obtained for seeded varieties, but of 0% (MG), 76.36% (MCP), 82.69% (MCM), and 0% (restricted) for seedless varieties. Fruits did not differ in quality among treatments within each genotype. Therefore, all the studied varieties require a pollination agent and diploid pollen for fruit set to occur, regardless of the donor variety; and Minipol or Polimore with HA-5106 or HA-5158 are the varieties recommended for cultivation in protected environment.