Embryo transfer as a tool to disseminate k-casein BB genotype and improve milk clotting properties

Dairy industries are asked to be increasingly competitive and efficient. Despite the increasing trend in milk yield and protein content during the last decade genetic selection, milk coagulation ability has diminished and even if the absolute amount of cheese produced has increased, the relative cheese yield from a set amount of milk, has decreased. As casein content and variants, along with milk clotting properties (MCP) are determined to a large extent at DNA level, genetic selection and embryo transfer can provide efficacious tools to reverse this trend and achieve improvements. The aim of the proposed research was to determine how rapidly and to what extent milk coagulation properties could be improved by using embryo transfer (ET) as a tool to increase the frequency of k-casein BB genotype cattle and reducing A and E variants in an Italian Holstein herd with a low prevalence of the favourable genotype. In the effort to optimize superovulation protocols and results, synchronization of wave emergence was performed through manual transrectal ablation of the largest (dominant) ovarian follicle on days 7 or 8 of the cycle (estrus = day 0); different drugs and dosage for the superstimulation protocol were experimented trying to overcome the negative effects of stress and the perturbance of LH secretion in superovulated highly producing lactating cows and the use of SexedULTRA™ sex-sorted semen, for artificial insemination of superovulated cows was reported for the first time. The selection program carried out in this research, gave evidence and gathered empirical data of feasible genetic improvements in cheesemaking ability of milk by means of k-casein BB selection. In conclusion, in this project, selection of k-casein BB genotype markedly enhanced cheese-making properties of milk, providing an impetus to include milk coagulation traits in genetic selection and breeding programs for dairy cattle.

Enabling 5G and beyond: millimeter wave propagation and cloud RAN evolution

In the last few years, mobile wireless technology has gone through a revolutionary change. Web-enabled devices have evolved into essential tools for communication, information, and entertainment. The fifth generation (5G) of mobile communication networks is envisioned to be a key enabler of the next upcoming wireless revolution. Millimeter wave (mmWave) spectrum and the evolution of Cloud Radio Access Networks (C-RANs) are two of the main technological innovations of 5G wireless systems and beyond. Because of the current spectrum-shortage condition, mmWaves have been proposed for the next generation systems, providing larger bandwidths and higher data rates. Consequently, new radio channel models are being developed. Recently, deterministic ray-based models such as Ray-Tracing (RT) are getting more attractive thanks to their frequency-agility and reliable predictions. A modern RT software has been calibrated and used to analyze the mmWave channel. Knowledge of the electromagnetic properties of materials is therefore essential. Hence, an item-level electromagnetic characterization of common construction materials has been successfully achieved to obtain information about their complex relative permittivity. A complete tuning of the RT tool has been performed against indoor and outdoor measurement campaigns at 27 and 38 GHz, setting the basis for the future development of advanced beamforming techniques which rely on deterministic propagation models (as RT). C-RAN is a novel mobile network architecture which can address a number of challenges that network operators are facing in order to meet the continuous customers’ demands. C-RANs have already been adopted in advanced 4G deployments; however, there are still some issues to deal with, especially considering the bandwidth requirements set by the forthcoming 5G systems. Open RAN specifications have been proposed to overcome the new 5G challenges set on C-RAN architectures, including synchronization aspects. In this work it is described an FPGA implementation of the Synchronization Plane for an O-RAN-compliant radio system.

The cosmic ray tagger of the ICARUS detector: construction, commissioning and performances in the first physics run

The Short Baseline Neutrino Program at Fermilab aims to confirm or definitely rule out the existence of sterile neutrinos at the eV mass scale. The program will perform the most sensitive search in both the nue appearance and numu disappearance channels along the Booster Neutrino Beamline. The far detector, ICARUS-T600, is a high-granularity Liquid Argon Time Projection Chamber located at 600 m from the Booster neutrino source and at shallow depth, thus exposed to a large flux of cosmic particles. Additionally, ICARUS is located 6 degrees off axis with respect to the Neutrino beam from the Main Injector. This thesis presents the construction, installation and commissioning of the ICARUS Cosmic Ray Tagger system, providing a 4 pi coverage of the active liquid argon volume. By exploiting only the precise nanosecond scale synchronization of the cosmic tagger and the PMT optical flashes it is possible to determine if an event was likely triggered by a cosmic particle. The results show that using the Top Cosmic Ray Tagger alone a conservative rejection larger than 65% of the cosmic induced background can be achieved. Additionally, by requiring the absence of hits in the whole cosmic tagger system it is possible to perform a pre-selection of contained neutrino events ahead of the full event reconstruction.

Motion Control of an Advanced Electric Implement for Agricultural Autonomous Vehicles

Nowadays, the development of intelligent and autonomous vehicles used to perform agricultural activities is essential to improve quantity and quality of agricultural productions. Moreover, with automation techniques it is possible to reduce the usage of agrochemicals and minimize the pollution. The University of Bologna is developing an innovative system for orchard management called ORTO (Orchard Rapid Transportation System). This system involves an autonomous electric vehicle capable to perform agricultural activities inside an orchard structure. The vehicle is equipped with an implement capable to perform different tasks. The purpose of this thesis project is to control the vehicle and the implement to perform an inter-row grass mowing. This kind of task requires a synchronized motion between the traction motors and the implement motors. A motion control system has been developed to generate trajectories and manage their synchronization. Two main trajectories type have been used: a five order polynomial trajectory and a trapezoidal trajectory. These two kinds of trajectories have been chosen in order to perform a uniform grass mowing, paying a particular attention to the constrains of the system. To synchronize the motions, the electronic cams approach has been adopted. A master profile has been generated and all the trajectories have been linked to the master motion. Moreover, a safety system has been developed. The aim of this system is firstly to improve the safety during the motion, furthermore it allows to manage obstacle detection and avoidance. Using some particular techniques obstacles can be detected and recovery action can be performed to overcome the problem. Once the measured force reaches the predefined force threshold, then the vehicle stops immediately its motion. The whole project has been developed by employing Matlab and Simulink. Eventually, the software has been translated into C code and executed on the TI Lauchpad XL board.

Development of a Robotic Wires Storage System for Switchgear Manufacturing Automation

Considering the great development of robotics in industrial automation, the Remodel project aims to reproduce, through the use of Cobots, the wiring activity typical of a human operator and to realize an autonomous storage work. My researches focused on this second topic. In this paper, we will see how to realize a gripper compatible with an Omron TM5X-900, able to perform a pick and place of different types of cables, but also how to compute possible trajectories. In particular, what I needed, was a trajectory going from the Komax, the cables production machine, to a Warehouse taking into account the possible entangles of cables with the robot during its motion. The last part has been dedicated to the synchronization between robot and main machine work.

Effetto di distrattori acustici rispetto a distrattori visivi in un compito di memoria visiva: analisi del segnale EEG

Studi recenti hanno evidenziato cambiamenti nei ritmi alpha (8-12 Hz) e theta (4-8 Hz) in vari processi modulatori top-down e di controllo cognitivo come la memoria di lavoro (WM, working memory) e la soppressione di distrattori. I compiti di WM richiedono attenzione interna sostenuta per dare priorità alle informazioni rilevanti a discapito di quelle interferenti che distraggono dall’obiettivo. I meccanismi di attenzione in tali compiti sono associati ad aumento di potenza alpha, che riflette la funzione inibitoria di tale ritmo, in regioni che elaborano informazioni distraenti, e ad aumento di potenza theta, soprattutto in regioni frontali, che riflette funzioni di controllo cognitivo per raggiungere l’obiettivo pur in presenza di interferenze. Questo lavoro è volto ad indagare gli effetti di distrattori acustici rispetto a distrattori visivi in un compito di visual WM. A tale scopo sono stati acquisiti ed elaborati i segnali EEG di 12 soggetti volontari mentre eseguivano un compito di visual WM, in cui la fase di retention (mantenimento in memoria delle informazioni codificate) veniva interrotta con la presentazione di distrattori di due modalità sensoriali differenti (visiva e acustica), per valutare le variazioni dell’attività cerebrale in termini di ritmi alpha e theta e le regioni coinvolte. Si è osservato un aumento maggiore di potenza alpha (principalmente posteriore) in presenza del distrattore acustico rispetto al visivo sia nella fase pre-distrattore che nella fase distrattore, statisticamente significativo nella fase distrattore. Si è osservato un aumento maggiore di potenza theta (principalmente frontale) in presenza del distrattore acustico rispetto al visivo in tutte le fasi del task, statisticamente significativo nella fase iniziale di retention e nella fase del distrattore. I risultati potrebbero indicare una maggiore necessità di controllo cognitivo e di protezione da stimoli interferenti in caso di distrattore acustico rispetto al visivo.

“Event-Related Spectral Perturbations” nel segnale EEG durante un compito di reaching

Questo elaborato ha analizzato le Event Related Spectral Perturbation (ERSP), cioè le variazioni nella potenza del segnale in corrispondenza di una frequenza o una banda di frequenze, suddivisi in Event Related Synchronization (ERS) nel caso di incremento di potenza e Event Related Desynchronization (ERD) nel caso di decremento di potenza, relative a movimenti di reaching eseguiti con l’arto superiore. In particolare, sono state prese in considerazione le potenze nel ritmo alpha (8-12 Hz) e ritmo beta (12-30 Hz), in quanto ritmi associati alla preparazione ed esecuzione del movimento. I segnali EEG analizzati (60 canali) sono relativi a 14 soggetti a cui è stato chiesto di compiere movimenti di reaching verso una posizione target, secondo una tempistica definita dall’accensione di uno stimolo visivo informativo (CUE, corrispondente al led nella posizione target) e un secondo stimolo visivo imperativo (GO) che dà il via libera all’esecuzione del movimento verso il target. Sono codificate 5 posizioni discrete, a 0°, 45°, 90°, 135° e 180°, su una semicirconferenza il cui centro rappresenta il punto di partenza e ritorno, chiamato base. I segnali preventivamente preprocessati, sono stati decomposti tramite trasformata wavelet ed elaborati con la tecnica dell’averaging, con lo scopo di evidenziare ERS e ERD in banda alpha e beta associati a eventi visivi e motori. È stata presentata l’evoluzione nel tempo della distribuzione topologica delle ERSP a livello dello scalpo e sono state svolte analisi suddividendo i dati secondo la direzione (destra, centro, sinistra) del target e secondo la profondità (vicino, medio, lontano) del target. I risultati mostrano una desincronizzazione (ERD) nella fase di preparazione del movimento (immediatamente prima dello stimolo GO), sia in banda alpha che beta e suggeriscono una modulazione dell’ERD in funzione della direzione/profondità del target.