Testing the Freeze/Thaw Cycles in Lime Mortar

2nd Historic Mortars Conference - HMC 2010 and RILEM TC 203-RHM Final Workshop, Prague, September 2010

Qualidade de sementes de girassol na safrinha do Distrito Federal.

RESUMO: O presente trabalho teve como objetivo avaliar, através de diferentes testes, a qualidade fisiológica de sementes de girassol na safrinha do Distrito Federal. Os testes foram realizados no Laboratório de Sementes da Faculdade de Agronomia e Veterinária ? FAV, da Universidade de Brasília - UnB, Campus Universitário Darcy Ribeiro, Brasília, DF, em 2014. Foram realizados testes de germinação padrão em areia e em papel, peso da matéria verde e da matéria seca, envelhecimento acelerado, condutividade elétrica e lixiviados de potássio. Foram encontradas diferenças significativas entre os genótipos para as todas as características avaliadas. Dentre os genótipos avaliados, os híbridos que se destacaram quanto a qualidades fisiológicas desejáveis pelos testes de germinação, condutividade elétrica e lixiviação de potássio foram BRS G42 e SYN 045. Materiais genéticos foram identificados no trabalho para possível exploração em programas de melhoramento. ABSTRACT: This study aims to evaluate, through different tests, the seed physiological quality of sunflower in the second crop in the Brazilian savannah. The tests were carried on in the Seed Laboratory of Veterinary and Agriculture Faculty of University of Brasilia, in 2014. The tests were seedling emergence in sand and paper, green and dry matter weight, accelerated aging, electrical conductivity and potassium leached. Related to the evaluated characteristics, significant differences were found between genotypes. Among them, the hybrids that stood out for the physiologic characteristics through the germination test, electric conductivity and potassium leaching were BRS G42 and SYN 045. Genetic materials were identified in this study for a possible exploration in breeding programs.

The presence of Lutzomyia longipalpis in a focus of American visceral leishmaniasis where the only proven vector is Lutzomyia cruzi. Corumbá, Mato Grosso do Sul State

The present communication reports the presence of Lutzomyia longipalpis in Corumbá, Mato Grosso do Sul, where the principal vector is Lutzomyia cruzi.

Phenetic studies on randomly amplified polymorphic DNA-polymerase chain reaction-variability of four geographical populations of Lutzomyia whitmani (Diptera: Psychodidae) in Brazil

Previous evaluation of the genetic variability of four biogeographical populations of Lutzomyia whitmani from known foci of cutaneous leishmaniasis in Brazil demonstrated two main spatial clusters: Corte de Pedra-BA, Ilhéus-BA and Serra de Baturité-CE in the first cluster, and Martinho Campos-MG in the second. Further analysis showed a high degree of homogeneity in Corte de Pedra population but not in the others, which presented a significant percentage of specimens displaced from their phenon of origin (discrepant individuals). In the present work we analyzed the frequencies of association coefficients in the matrixes of similarity per population of Lutzomyia whitmani from both sexes and the general phenograms obtained, in a more detailed study of those discrepant specimens. Populational stability was observed for Corte de Pedra population, whereas the three remaining populations showed varying degrees of heterogeneity and different displacements according to sex. Our results strongly suggested the existence of a genetic flow between the lineages North-South/North-East and Ilhéus/Serra do Baturité of Lutzomyia whitmani.

Epidemiologic surveillance of canine visceral leishmaniasis in the municipality of Recife, Pernambuco

This paper describes an epidemiologic investigation carried out in Imbiribeira district, where a canine visceral leishmaniasis case was recorded. Despite the absence of seropositive dogs and sand flies, these findings are not sufficient to discard the occurrence of a zoonotic cycle of visceral leishmaniasis in Recife.

Seasonal variation of Lutzomyia longipalpis in Belo Horizonte, State of Minas Gerais

Between October, 1997 and September, 1999 in Belo Horizonte, Minas Gerais a study of seasonal variation of Lutzomyia longipalpis was carried out in three distinct areas of the municipality. Sand flies were sampled at 15-day intervals in three residences, in each of which two CDC light traps were installed, one indoors and the other in the peridomicile. A total of 397 sand flies were captured in the three areas, with 65%, 30% and 1% of specimens collected in the eastern, northeast and Barreiro districts, respectively. The overall proportions of sand flies collected inside and around the houses were similar (57% vs 43%) and this pattern was seen for both Lutzomyia longipalpis and Lutzomyia whitmani . The highest population levels during the two years of the study were from October to March. From October onwards, numbers increased constantly until February. A gradual fall was seen from April onwards until the lowest levels were reached in the months of June, July and August.

Air lime-earth blended mortars - Assessment on fresh state and workability

International Conference on Vernacular Heritage, Sustainability and Earthen Architecture, VerSus 2014, 2nd MEDITERRA, 2nd ResTAPIA, 11-13 September, Valencia, Spain

List of species in the genus Lutzomyia, França, 1924 (Psychodidae, Phlebotominae) from the State of Mato Grosso

This work had the objective of listing the sand fly species that occur in the State of Mato Grosso, Brazil. Data relating to entomological surveys conducted between 1996 and 2004 were obtained from the National Health Foundation and the State Health Department, and this was supplemented with information from research carried out in the state and from the specialized literature. There were records of 106 sand fly species belonging to the genus Lutzomyia. This is a rich and diversified fauna, with some species restricted to forested areas and others recorded throughout the state, independent of the vegetation type, and in areas modified by human action, with predominance of Lutzomyia whitmani.

Lime mortars with ceramic wastes: characterization of components and their influence on the mechanical behaviour

Considering the fundamental importance of preserving the built heritage and of ensuring the good performance achieved by incorporating ceramic particles in lime mortars in ancient times, it is important to study solutions that use materials the available today, in order to produce mortars intended to repair and replace the old ones. Solutions incorporating industrial ceramic waste might be profitable for several reasons, namely for economic, environmental and technical aspects. In this paper, seven ceramic waste products collected from ceramics factories are characterized. Their mineralogy, dimensional features and pozzolanicity were determined. Three of these products, with different particle size fractions (obtained directly from milling, dust only and fragment fractions only), were selected, incorporated into air lime mortars, and their mechanical strength was determined. In the present work, evidence of mechanical efficiency, when common sand or air lime were partially replaced by ceramic wastes, was made clear, drawing attention to the sustainability of this type of mortars, hence, encouraging further research.

Incorporação de resíduos de cerâmica em argamassas de cal aérea

Sabe-se que aproximadamente 30% do material produzido pela indústria cerâmica é considerado desperdício e, frequentemente, depositado em aterro, com o impacto ambiental negativo que acarreta. Esta tem sido uma das grandes motivações para a crescente investigação que tem sido levada a cabo a fim de obter soluções viáveis para a sua reintrodução no processo produtivo. A viabilidade do uso de resíduos de material cerâmico tem vindo a ser avaliada, principalmente, na incorporação em betões ou em argamassas com base em cimento. Na antiguidade e na ausência de pozolanas naturais, eram frequentemente utilizados resíduos cerâmicos moídos, atuando como pozolanas artificiais e conferindo algumas características hidráulicas e de durabilidade às argamassas de cal aérea. Temse efetivamente constatado que alguns pós resultantes de desperdícios de cerâmica de barro vermelho, nomeadamente os que foram sujeitos a tratamento térmico a temperaturas inferiores a 900°C e moídos em granulometria fina, podem funcionar como pozolanas artificiais em argamassas. A introdução de resíduos de cerâmica em granulometria mais grossa nas argamassas, como agregado, pode também revelarse vantajoso, na medida em que permite substituir parcialmente a areia normalmente utilizada. Assim sendo, o recurso aos resíduos de cerâmica pode ser muito vantajoso em três vertentes principais: a redução de resíduos a depositar em aterro, a redução da extração de rochas para serem utilizadas na produção de ligantes e de areias e a produção de argamassas com comportamentos melhorados. Com o objetivo de analisar a viabilidade da introdução de resíduos de cerâmica em argamassas, que se pretendem sejam, essencialmente, adequadas como argamassas de substituição, tem vindo a ser desenvolvida investigação na Universidade de Coimbra em colaboração com a Universidade Nova de Lisboa. O trabalho que se apresenta neste artigo é uma pequena parte dessa investigação. Toda esta investigação tem tido o apoio de um projeto de investigação financiado pela FCT.

Hygrothermal behaviour of earthen plasters for sustainable housing construction

A ready-mixed and several laboratory formulated mortars were produced and tested in fresh state and after hardening, simulating a masonry plaster for indoor application. All the mortars used a clayish earth from the same region and different compositions of aggregates, eventually including fibres and a phase change material. All the formulated mortars were composed by 1:3 volumetric proportions of earth and aggregate. Tests were developed for consistency, fresh bulk density, thermal conductivity, capillary absorption and drying, water vapour permeability and sorption-desorption. The use of PCM changed drastically the workability of the mortars and increased their capillary absorption. The use of fibres and variations on particle size distribution of the mixtures of sand that were used had no significant influence on tested properties. But particularly the good workability of these mortars and the high capacity of sorption and desorption was highlighted. With this capacity plasters made with these mortars are able to adsorb water vapour from indoor atmosphere when high levels of relative humidity exist and release water vapour when the indoor atmosphere became too dry. This fact makes them able to contribute passively for a healthier indoor environment. The technical, ecological and environmental advantages of the application of plasters with this type of mortars are emphasized, with the aim of contributing for an increased use for new or existent housing.

PCR-RFLP of 16S ribosomal DNA to confirm the identification of Enterococcus gallinarum and Enterococcus casseliflavus isolated from clinical and food samples

INTRODUCTION: This study aimed to confirm the identification of Enterococcus gallinarum and Enterococcus casseliflavus isolated from clinical and food samples by PCR-RFLP. METHODS: Fifty-two strains identified by conventional biochemical exams were submitted to PCR amplification and digested with HinfI. Only 20 (38.5%) of the 52 strains showed a DNA pattern expected for E. gallinarum and E. casseliflavus. RESULTS: Analysis of the results of this study showed that E. gallinarum and E. casseliflavus are occasionally erroneously identified and confirmed the potential application of 16S rDNA analysis for accurate identification of these species. CONCLUSIONS: A correct identification is important to distinguish between intrinsic and acquired vancomycin resistance.

Risk factors for Leishmania chagasi infection in an endemic area in Raposa, State of Maranhão, Brazil

INTRODUCTION: Infection with Leishmania chagasi is the most common clinical presentation for visceral leishmaniaisis in endemic areas. The municipality of Raposa is an endemic area in State of Maranhão, Brazil, and have had registration cases of visceral leishmaniasis disease. For this reason, a cross- sectional study was conducted to evaluate the risk factors for infection with L. chagasi detected by Montenegro skin test. METHODS: The sample comprised 96% of the inhabitants of the villages of Maresia, Pantoja, and Marisol located in the municipality of Raposa, corresponding to 1,359 subjects. Data were collected using a questionnaire. Univariate and multivariate logistic regression models were applied to evaluate the association between the variables studied and infection of L. chagasi. RESULTS: The variables associated with infection upon nonadjusted analysis were a straw roof, mud walls, floors of beaten earth, presence of sand flies inside or outside of the dwelling, and bathing outdoors. Adjusted analysis showed that the presence of sand flies inside/outside the dwelling was a risk factor, and age younger than 10 years was a protective factor against asymptomatic infection. CONCLUSIONS: The results highlight the extent to which precarious living conditions of the population strengthen the epidemiological chain of visceral leishmaniasis.

NHL 3.5 mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. Scrap tire rubber has been studied as aggregate for cementitious materials. Natural hydraulic limes are natural binders with particular characteristics of both air and hydraulic binders. Their specifications became stricter with the last version of EN 459-1:2010. In this study scrap tire rubber was used as additional aggregate of mortars, based on NHL3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained almost directly from industry (only after sieving for preparation of particle sizes similar to mortar aggregate) and separated fine, medium and coarse fractions; 0%, 18%, 36% and 54% weight of binder, corresponding to 2.5%, 5% and 7.5% weight of sand. The influence of the rubbers´ additions on the mortars´ fresh state, mechanical and physical performance is presented, namely by flow table consistency, water retention, fresh bulk density, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

Prevalence of enterotoxin-encoding genes and antimicrobial resistance in coagulase-negative and coagulase-positive Staphylococcus isolates from black pudding

INTRODUCTION: Staphylococcal species are pathogens that are responsible for outbreaks of foodborne diseases. The aim of this study was to investigate the prevalence of enterotoxin-genes and the antimicrobial resistance profile in staphylococcus coagulase-negative (CoNS) and coagulasepositive (CoPS) isolates from black pudding in southern Brazil. METHODS: Two hundred typical and atypical colonies from Baird-Parker agar were inoculated on mannitol salt agar. Eighty-two mannitol-positive staphylococci were submitted to conventional biochemical tests and antimicrobial susceptibility profiling. The presence of coagulase (coa) and enterotoxin (se) genes was investigated by polymerase chain reaction. RESULTS: The isolates were divided into 2 groups: 75.6% (62/82) were CoNS and 24.4% (20/82) were CoPS. The biochemical tests identified 9 species, of which Staphylococcus saprophyticus (37.8%) and Staphylococcus carnosus (15.9%) were the most prevalent. Antimicrobial susceptibility tests showed resistance phenotypes to antibiotics widely administered in humans, such as gentamicin, tetracycline, chloramphenicol, and erythromycin. The coa gene was detected in 19.5% (16/82) of the strains and 4 polymorphic DNA fragments were observed. Five CoNS isolates carrying the coa gene were submitted for 16S rRNA sequencing and 3 showed similarity with CoNS. Forty strains were positive for at least 1 enterotoxin-encoding gene, the genes most frequently detected were sea (28.6%) and seb (27.5%). CONCLUSIONS: The presence of antimicrobial resistant and enterotoxin-encoding genes in staphylococci isolates from black pudding indicated that this fermented food may represent a potential health risk, since staphylococci present in food could cause foodborne diseases or be a possible route for the transfer of antimicrobial resistance to humans.