Detailed experimental iced-storage characteristics of Barents Sea cod (Gadus morhua)

Im August 1997 wurde an Bord des FFS „Walther Herwig“ ein Eislagerversuch mit Kabeljau aus der Barebtssee durchgeführt. Die Fische wurden in täglichem Abstand auf ihre chemischen, physikalischen, sensorischen und mikrobiologischen Eigenschaften hin untersucht. Die analytischen Daten wurden jeweils mit den Tagen in Eis korreliert. Es erwies sich, daß die Werte vom Fischtester VI sowie RT Frischetester, von Dimethylamin- und Trimethylaminoxidstickstoff, die Qualitätseinstufung anhand des EUQualitätsbewertungsschemas, die sensorische Bewertung von gegarten Filetproben und die Gesamtkeimzahl auf der Haut am besten mit den im Eis verbrachten Tagen korrelierten. Die guteKorrelation zwischen sensorischen und instrumentell ermittelten Daten läßt in gewissem Umfang einen Ersatz von Sensorikdaten durch instrumentell ermittelten zu.

An evaluation of the trophic status of the Shen Reservoir by an analysis of phytoplankton composition and water characteristics

In an effort to evaluate the production potential of an artificial impoundment, the phytoplankton of the Shen reservoir was sampled from November 1981 to June 1982 at three stations during three periods of distinct seasonal hydrographic characteristics. The samples were subsampled and quantified. Most of the phytoplankton were identified to the species level. There were in all 53 species comprising Chlorophyceae contributing 36.70% with species of Volvox, Pediastrum, Closterium, Staurodesmus and Ankistrodesmus as dominant species in this group. The Cyanophyceae contributed 30.00% with species of Microcystis, Nostoc , and Oscillatoria as the dominant species. An analysis of temporal and spatial changes in composition and abundance of the various groups showed that these were influenced by water temperature, sampling period and station. Based on the trophic status of the most abundant species, the composition of the phytoplankton is indicative of a tropical reservoir with a moderate productivity for fish culture

Aerodynamic characteristics research on wide-speed range waverider configuration

Waverider generated from a given flow field has a high lift-to-drag ratio because of attached bow shock on leading edge. However, leading edge blunt and off-design condition can make bow shock off leading edge and have unfavorable influence on aerodynamic characteristics. So these two problems have always been concerned as important engineering science issues by aeronautical engineering scientists. In this paper, through respectively using low speed and high speed waverider design principles, a wide-speed rang vehicle is designed, which can level takeoff and accelerate to hypersonic speed for cruise. In addition, sharp leading edge is blunted to alleviated aeroheating. Theoretical study and wind tunnel test show that this vehicle has good aerodynamic performance in wide-speed range of subsonic, transonic, supersonic and hypersonic speeds.

The effects of dietary treatment on the morphometrics and haematological characteristics in Clarias gariepinus

Fingerling of Clarias gariepinus have been reported to have an optimal protein requirement of 40%. Not much is known about the effect that varying this protein level has in the haematological characteristics (i.e packed cell volume, red blood cell count, haemoglobin concentration and mean corpuscular haemoglobin concentration) and on some landmarks measured along the fish's body. The haematological parameter are useful in assessing the effect of dietary treatment on leanness or robustness in the fish. The results of these experiment reveals that of the 17 landmarks measured on the bodies of the fish species fed dietary protein levels of no protein 11% (low protein), 29% (sub optimal) and 40% (optimal), only four of the landmarks show significant difference. Also, analysis of the haematological characteristics show significant difference in haematoant (PCV) and erthroycte count (RBC) in all the treatments

Evaluation of toxicity effect of Datura innoxia root extract to Clarias gariepinus fingerlings

Clarias gariepinus fingerlings were exposed 96 hours under laboratory conditions using static bioassays with continuous aeration to determine acute toxicity of Datura innoxia root extract. The LC sub(50) of the exposed fingerlings was 128.83 mg/L. The fish exhibited loss of balance, respiratory distress and swam erratically just prior to death

Feeding ecology and population characteristics of Oreochromis niloticus (L.) and trophic interactions in the fish community of Nyanza Gulf, Lake Victoria, Kenya

Oreochromis niloticus (L.) were caught by beach seining, hook and line and trawling from Nyanza Gulf, lake Victoria (Kenya) in order to study their feeding ecology and population characteristics. Collected fish were weighed and TL measured immediately after capture. Fish were dissected and sexed. Stomach contents were removed and preserved in 4% buffered formalin for laboratory analysis. In the laboratory items were sorted into categories such as three quarters, half and quarter and awarded 20, 15 and 5 points respectively. Main food items for O. niloticus from November 1998 to March 1999 were insects, algae, fish and plant material. Increase in insects in the diet of O. niloticus might be attributed to the lake infestation by water hyacinth which harbours different species of insects

Modelling Study On The Plasma Flow and Heat Transfer In A Laminar Arc Plasma Torch Operating At Atmospheric and Reduced Pressure

A modelling study is performed to investigate the characteristics of both plasma flow and heat transfer of a laminar non-transferred arc argon plasma torch operated at atmospheric and reduced pressure. It is found that the calculated flow fields and temperature distributions are quite similar for both cases at a chamber pressure of 1.0 atm and 0.1 atm. A fully developed flow regime could be achieved in the arc constrictor-tube between the cathode and the anode of the plasma torch at 1.0 atm for all the flow rates covered in this study. However the flow field could not reach the fully developed regime at 0.1 atm with a higher flow rate. The arc-root is always attached to the torch anode surface near the upstream end of the anode, i.e. the abruptly expanded part of the torch channel, which is in consistence with experimental observation. The surrounding gas would be entrained from the torch exit into the torch interior due to a comparatively large inner diameter of the anode channel compared to that of the arc constrictor-tube.

Effects of anode temperature on working characteristics and performance of a low power arcjet thruster

An arc-heated thruster of 130–800 W input power is tested in a vacuum chamber at pressures lower than 20 Pa with argon or H2–N2 gas mixture as propellant. The time-dependent arc voltage-current curve, outside-surface temperature of the anode nozzle and the produced thrust of the firing arcjet thruster are measured in situ simultaneously, in order to analyze and evaluate the dependence of thruster working characteristics and output properties, such as specific impulse and thrust efficiency, on nozzle temperature.

Development of arc root attachment in the nozzle of 1 kW N2 and H2-N2 arcjet thrusters

Arc root behavior affects the energy transfer and nozzle erosion in an arcjet thruster. To investigate the development of arc root attachment in 1 kW class N2 and H2-N2 arcjet thrusters from the time of ignition to the stably working condition, a kinetic series of end-on view images of the nozzle obtained by a high-speed video camera was analyzed. The addition of hydrogen leads to higher arc voltage levels and the determining factor for the mode of arc root attachment was found to be the nozzle temperature. At lower nozzle temperatures, constricted type attachment with unstable motions of the arc root was observed, while a fully diffused and stable arc root was observed at elevated nozzle temperatures.

Part 1: Longitudinal static and dynamic effects in semiconductor lasers. Part II: Spectral characteristics of passively mode-locked quantum well lasers

In the first part of this thesis a study of the effect of the longitudinal distribution of optical intensity and electron density on the static and dynamic behavior of semiconductor lasers is performed. A static model for above threshold operation of a single mode laser, consisting of multiple active and passive sections, is developed by calculating the longitudinal optical intensity distribution and electron density distribution in a self-consistent manner. Feedback from an index and gain Bragg grating is included, as well as feedback from discrete reflections at interfaces and facets. Longitudinal spatial holeburning is analyzed by including the dependence of the gain and the refractive index on the electron density. The mechanisms of spatial holeburning in quarter wave shifted DFB lasers are analyzed. A new laser structure with a uniform optical intensity distribution is introduced and an implementation is simulated, resulting in a large reduction of the longitudinal spatial holeburning effect.

A dynamic small-signal model is then developed by including the optical intensity and electron density distribution, as well as the dependence of the grating coupling coefficients on the electron density. Expressions are derived for the intensity and frequency noise spectrum, the spontaneous emission rate into the lasing mode, the linewidth enhancement factor, and the AM and FM modulation response. Different chirp components are identified in the FM response, and a new adiabatic chirp component is discovered. This new adiabatic chirp component is caused by the nonuniform longitudinal distributions, and is found to dominate at low frequencies. Distributed feedback lasers with partial gain coupling are analyzed, and it is shown how the dependence of the grating coupling coefficients on the electron density can result in an enhancement of the differential gain with an associated enhancement in modulation bandwidth and a reduction in chirp.

In the second part, spectral characteristics of passively mode-locked two-section multiple quantum well laser coupled to an external cavity are studied. Broad-band wavelength tuning using an external grating is demonstrated for the first time in passively mode-locked semiconductor lasers. A record tuning range of 26 nm is measured, with pulse widths of typically a few picosecond and time-bandwidth products of more than 10 times the transform limit. It is then demonstrated that these large time-bandwidth products are due to a strong linear upchirp, by performing pulse compression by a factor of 15 to a record pulse widths as low 320 fs.

A model for pulse propagation through a saturable medium with self-phase-modulation, due to the a-parameter, is developed for quantum well material, including the frequency dependence of the gain medium. This model is used to simulate two-section devices coupled to an external cavity. When no self-phase-modulation is present, it is found that the pulses are asymmetric with a sharper rising edge, that the pulse tails have an exponential behavior, and that the transform limit is 0.3. Inclusion of self-phase-modulation results in a linear upchirp imprinted on the pulse after each round-trip. This linear upchirp is due to a combination of self-phase-modulation in a gain section and absorption of the leading edge of the pulse in the saturable absorber.

Towards understanding the mixing characteristics of turbulent buoyant flows

This work proposes a new simulation methodology in which variable density turbulent flows can be studied in the context of a mixing layer with or without the presence of gravity. Specifically, this methodology is developed to probe the nature of non-buoyantly-driven (i.e. isotropically-driven) or buoyantly-driven mixing deep inside a mixing layer. Numerical forcing methods are incorporated into both the velocity and scalar fields, which extends the length of time over which mixing physics can be studied. The simulation framework is designed to allow for independent variation of four non-dimensional parameters, including the Reynolds, Richardson, Atwood, and Schmidt numbers. Additionally, the governing equations are integrated in such a way to allow for the relative magnitude of buoyant energy production and non-buoyant energy production to be varied.

The computational requirements needed to implement the proposed configuration are presented. They are justified in terms of grid resolution, order of accuracy, and transport scheme. Canonical features of turbulent buoyant flows are reproduced as validation of the proposed methodology. These features include the recovery of isotropic Kolmogorov scales under buoyant and non-buoyant conditions, the recovery of anisotropic one-dimensional energy spectra under buoyant conditions, and the preservation of known statistical distributions in the scalar field, as found in other DNS studies.

This simulation methodology is used to perform a parametric study of turbulent buoyant flows to discern the effects of varying the Reynolds, Richardson, and Atwood numbers on the resulting state of mixing. The effects of the Reynolds and Atwood numbers are isolated by looking at two energy dissipation rate conditions under non-buoyant (variable density) and constant density conditions. The effects of Richardson number are isolated by varying the ratio of buoyant energy production to total energy production from zero (non-buoyant) to one (entirely buoyant) under constant Atwood number, Schmidt number, and energy dissipation rate conditions. It is found that the major differences between non-buoyant and buoyant turbulent flows are contained in the transfer spectrum and longitudinal structure functions, while all other metrics are largely similar (e.g. energy spectra, alignment characteristics of the strain-rate tensor). Also, despite the differences noted between fully buoyant and non-buoyant turbulent fields, the scalar field, in all cases, is unchanged by these. The mixing dynamics in the scalar field are found to be insensitive to the source of turbulent kinetic energy production (non-buoyant vs. buoyant).