Synthesis, physical and magnetic properties of BaFe12O19/P(VDF-TrFE) multifunctional composites

Composite films with filler microparticles of Barium ferrite dispersed within P(VDF-TrFE) as polymeric matrix have been prepared by solvent evaporation. The lowest BaFO content of 1% wt acts as a small defect within the polymeric matrix, reducing the values of the dielectric and mechanical properties of the pure P(VDF-TrFE). For filler contents up to a 20%, the BaFO filler reinforces the matrix and measured properties increase their values. This trend is not followed by the electrical conductivity. We extended the study to fibers composed by BaFe12O19 microparticles in a PVDF matrix. Due to the big size of BaFO particles (1 micron in diameter), proper fabrication of the fiber shaped composites has not been achieved. We found that true BaFO content are always lower than nominal ones. Results are discussed in terms of the influence of size and morphology of the BaFO particles on the initial properties of the polymeric matrix.

Ion exchange dependent electroactive phase content and electrical properties of poly(vinylidene fluoride)/Na(M)Y composites

Different metal-ion exchanged NaY zeolite, Na(M)Y, were used to prepare poly(vinylidene fluoride) based composites by solvent casting and melting crystallization. The effect of different metal ion-exchanged zeolites on polymer crystallization and electrical properties was reported. Cation-framework interactions and hydration energy of the cations determined that K+ is the most efficient exchanged ion in NaY zeolite, followed by Cs+ and Li+. The electroactive phase crystallization strongly depends on the ions present in the zeolite, leading to variations of the surface energy characteristics of the Na(M)Y zeolites and the polymer chain ability of penetration in the zeolite. Thus, Na(Li)Y and NaY induces the complete electroactive -phase crystallization of the crystalline phase of PVDF, while Na(K)Y only induces it partly and Na(Cs)Y is not able to promote the crystallization of the electroactive phase. Furthermore, different ion size/weigh and different interaction with the zeolite framework results in significant variations in the electrical response of the composite. In this way, iinterfacial polarization effects in the zeolite cavities and zeolite-polymer interface, leads to strong increases of the dielectric constant on the composites with lightest ions weakly bound to the zeolite framework. Polymer composite with Na(Li)Y show the highest dielectric response, followed by NaY and Na(K)Y. Zeolite Na(Cs)Y contribute to a decrease of the dielectric constant of the composite. The results show the relevance of the materials for sensor development.

Portuguese publication in the aim of regional science: a study of articles published in RPER from 2003 to 2015

This paper is a study of the full content of articles published by RPER, the Portuguese Review of Regional Studies, from the time it was launched in 2003 until the first quarter of 2015. RPER is a journal edited by the Portuguese section of the European Regional Science Association, which was established in the first half of the 1980s. The Association (APDR) and the journal are the result of contributions by researchers and technicians from different scientific fields, including mainly Economics, Geography, Sociology, Engineering and Architecture. The main focus of these contributions is the socio-economic life of concrete sites, and the way this life is conditioned by resources and capabilities, the historical and cultural heritage and institutions. Content analysis was undertaken to identify the main subjects chosen during the total period under analysis, the nature of the articles published (theoretical or empirical) and the main analytical framework used. The analysis also covers sub-periods to investigate major trends found in terms of subjects chosen and analytical methods, questioning the rationale behind them. The paper concludes with a few notes regarding the social echo the research received and an identification of the main limitations of the research. In the first part of the article, we conduct a summary review of the genesis and evolution of Regional Science at international level to serve as a basis for the empirical approach developed.

Density, size and distribution of stomata in 35 rainforest tree species in Central Amazonia

Stomata are turgor-operated valves that control water loss and CO2 uptake during photosynthesis, and thereby water relation and plant biomass accumulation is closely related to stomatal functioning. The aims of this work were to document how stomata are distributed on the leaf surface and to determine if there is any significant variation in stomatal characteristics among Amazonian tree species, and finally to study the relationship between stomatal density (S D) and tree height. Thirty five trees (>17 m tall) of different species were selected. Stomatal type, density (S D), size (S S) and stomatal distribution on the leaf surface were determined using nail polish imprints taken from both leaf surfaces. Irrespective of tree species, stomata were located only on the abaxial surface (hypostomaty), with large variation in both S D and S S among species. S D ranged from 110 mm-2 in Neea altissima to 846 mm-2 in Qualea acuminata. However, in most species S D ranges between 271 and 543 mm-2, with a negative relationship between S D and S S. We also found a positive relationship between S D and tree height (r² = 0.14, p < 0.01), but no correlation was found between S D and leaf thickness. The most common stomatal type was anomocytic (37%), followed by paracytic (26%) and anisocytic (11%). We conclude that in Amazonian tree species, stomatal distribution on the leaf surface is a response most likely dependent on the genetic background of every species, rather than a reaction to environmental changes, and that somehow S D is influenced by environmental factors dependent on tree height.

Seasonal and spatial variations in limnological conditions of a floodplain lake (lake Catalão) connected to both the Solimões and Negro Rivers, Central Amazonia

Lakes play an important role in biogeochemical, ecological and hydrological processes in the river-floodplain system. The aim of this study was to evaluate the dynamics of the limnological conditions of Catalão Lake, an Amazon floodplain lake. Thus, some of the main limnological environment variables (O2, temperature, pH, nutrient, electrical conductivity) of the Catalão Lake were analyzed under temporal and spacial scales. The study was conducted between November/2004 and August/2005. Sampling excursion were carried out every three months; one excursion for each of the four different hydrological periods (low water, rising water, high water and falling water). Sampling points were chosen so that it could be obtained a gradient of the distance from Negro River. Limnological profiles in Catalão Lake showed generally acidic to slightly alcaline water, with low levels of dissolved oxygen and low concentrations of soluble reactive phosphorous. The Negro River seems to exert the main influence during the rising water period, while the Solimões River is the principal controlling river during peak water. The Principal Component Analysis (PCA) grouped the seasonal collections by hydrological period, showing the formation of a north-south spatial gradient within the lake in relation to the limnological variables. Multivariate dispersion analysis based on distance-to-centroid method demonstrated an increase in similarity over the course of the hydrological cycle, as the lake was inundated in response to the flood pulse of the main river channels. However, the largest spatial homogeneity in the lake was observed in the epilimnion layer, during the falling water period. The daily analysis of variation indicated an oligomitic pattern during the years in which the lake was permanently connected to the Negro River. Although Catalão Lake receives large quantities of both black water from the Negro River and sediment-filled water from the Solimões River, the physical and chemical characteristics of the lake are more similar to those of the Solimões (várzea lake) than the Negro (blackwater lake).

Design of bio-based supramolecular structures through self-assembly of α-lactalbumin and lysozyme

Bovine α-lactalbumin (α-La) and lysozyme (Lys), two globular proteins with highly homologous tertiary structures and opposite isoelectric points, were used to produce bio-based supramolecular structures under various pH values (3, 7 and 11), temperatures (25, 50 and 75 °C) and times (15, 25 and 35 min) of heating. Isothermal titration calorimetry experiments showed protein interactions and demonstrated that structures were obtained from the mixture of α-La/Lys in molar ratio of 0.546. Structures were characterized in terms of morphology by transmission electron microscopy (TEM) and dynamic light scattering (DLS), conformational structure by circular dichroism and intrinsic fluorescence spectroscopy and stability by DLS. Results have shown that protein conformational structure and intermolecular interactions are controlled by the physicochemical conditions applied. The increase of heating temperature led to a significant decrease in size and polydispersity (PDI) of α-La–Lys supramolecular structures, while the increase of heating time, particularly at temperatures above 50 °C, promoted a significant increase in size and PDI. At pH 7 supramolecular structures were obtained at microscale – confirmed by optical microscopy – displaying also a high PDI (i.e. > 0.4). The minimum size and PDI (61 ± 2.3 nm and 0.14 ± 0.03, respectively) were produced at pH 11 for a heating treatment of 75 °C for 15 min, thus suggesting that these conditions could be considered as critical for supramolecular structure formation. Its size and morphology were confirmed by TEM showing a well-defined spherical form. Structures at these conditions showed to be stable at least for 30 or 90 days, when stored at 25 or 4 °C, respectively. Hence, α-La–Lys supramolecular structures showed properties that indicate that they are a promising delivery system for food and pharmaceutical applications.

Assessing the suitability of the minimum capture size and protection regimes in the gooseneck barnacle shellfishery

The suitability of a total-length-based, minimum capture-size and different protection regimes was investigated for the gooseneck barnacle Pollicipes pollicipes shellfishery in N Spain. For this analysis, individuals that were collected from 10 sites under different fishery protection regimes (permanently open, seasonally closed, and permanently closed) were used. First, we applied a non-parametric regression model to explore the relationship between the capitulum Rostro-Tergum (RT) size and the Total Length (TL). Important heteroskedastic disturbances were detected for this relationship, demon- strating a high variability of TL with respect to RT. This result substantiates the unsuitability of a TL-based minimum size by means of a mathematical model. Due to these disturbances, an alternative growth- based minimum capture size of 26.3 mm RT (23 mm RC) was estimated using the first derivative of a Kernel-based non-parametric regression model for the relationship between RT and dry weight. For this purpose, data from the permanently protected area were used to avoid bias due to the fishery. Second, the size-frequency distribution similarity was computed using a MDS analysis for the studied sites to evaluate the effectiveness of the protection regimes. The results of this analysis indicated a positive effect of the permanent protection, while the effect of the seasonal closure was not detected. This result needs to be interpreted with caution because the current harvesting based on a potentially unsuitable mini- mum capture size may dampen the efficacy of the seasonal protection regime.

Un modelo contable para la evaluación económico-financiera en escenarios futuros de la empresa agropecuaria. An accounting model for the economic and financial evaluation of future scenarios in farm enterprises.

El problema: En todo momento y sobre todo cuando estamos en presencia de escenarios económicos turbulentos resulta imprescindible utilizar herramientas que permitan realizar análisis de sensitividad sobre las distintas situaciones que podrían plantearse. La elaboración de modelos matemáticos deterministas desde las aplicaciones realizadas por Richard Mattessich han constituido un instrumento idóneo para el caso de empresas comerciales o industriales. Los modelos informáticos utilizados para las empresas agropecuarias han abordado fundamentalmente la temática relacionada con la producción, no así las otras variables económicas y financieras. Por lo tanto, entendemos que se hace necesario trabajar con modelos agropecuarios que comprendan todas las variables económicas y financieras, de manera de observar otro tipo de cuestiones, tales como: el modo de financiarse, los costos financieros, necesidades de capital de trabajo. Hipótesis: Es posible, a través de la utilización de la información contable en sentido prospectivo, interpretar adecuadamente los escenarios futuros de las organizaciones agropecuarias, cuantificando los impactos que generan tanto las estrategias y políticas aplicables, como las distorsiones del contexto. Objetivo general: determinar la incidencia de las decisiones internas y las que provengan del funcionamiento del sistema económico, a través de la información contable prospectiva. Objetivos específicos: a. Describir los impactos que se producen en la estructura patrimonial, financiera y en los resultados, como consecuencia de los cambios en las estrategias y políticas de la empresa agropecuaria, así como los efectos macroeconómicos en la estructura de la empresa que pudieran estar conmoviendo la gestión económico-financiera. b. Identificar mecanismos y proponer criterios para la elaboración de modelos que permitan visualizar los impactos en los escenarios futuros y las adecuaciones necesarias en la estructura que permitan soportar las modificaciones. Metodología: será un estudio a nivel teórico, donde una vez identificadas las variables y planteados los modelos, se propondrán distintas situaciones y se testearán las respuestas. Resultados esperados: lograr un avance en la evaluación económico-financiera prospectiva de empresas agropecuarias y constituir un avance para futuras investigaciones. Importancia del proyecto: La producción agropecuaria es vital tanto para el desarrollo económico de Argentina, como en particular para la provincia de Córdoba. Elaborar herramientas que eficientizen la administración de este tipo de empresas, redundará en beneficio colectivo. Pertinencia: El producto verificable será la construcción de un modelo distinto a los actuales, tanto en su desarrollo, objetivo al que está destinado y sencillez de su aplicación, posibilitando la inserción del productor en el proceso de planificación, reduciendo el riesgo en la toma de decisiones. Esperando generar un avance sobre los modelos preexistente.

Estudio de los modos de vida e historia biológica de las poblaciones humanas de la región central de argentina desde el registro bioarqueológico. Lifestyles and biological history of human populations of the central region of argentina from bioarchaeological record.

Se pretende aportar al estudio de la estructura, historia biológica y estilos de vida de las poblaciones que habitaron la región central de Argentina durante el Holoceno, desde una perspectiva que combina los aportes teóricos y metodológicos de la Genética del paisaje y la Bioarqueología. Interesa a) identificar barreras de diferenciación morfológica entre poblaciones, b) poner a prueba modelos poblacionales para explicar la variación observada e identificar las variables que contribuyan a dicha diferenciación, c) evaluar la congruencia de los resultados obtenidos, d) reconstruir los patrones de movilidad residencial de las poblaciones, e) estudiar sus patrones dietarios considerando diferencias temporales y espaciales, f) identificar indicadores de diversos tipos de estrés (nutricional, funcional), así como traumas, g) estudiar las historias tafonómicas del registro bioarqueológico regional, y h) proponer un modelo para explicar el poblamiento y la evolución local de las poblaciones que habitaron esta región, a partir de la información arqueológica y bioantropológica. Para el análisis de los patrones espaciales de variación biológica se trabajará a partir del registro de rasgos epigenéticos craneales, medidas lineales y datos obtenidos a partir de morfometría geométrica sobre fotografías en 2D sobre muestras arqueológicas procedentes de esta región y de otras regiones geográficas de la Argentina. Para el análisis de la estructura de la población se trabajará a partir del cálculo de la matriz R para datos morfológicos y sus estimaciones derivadas (distancia D², Fst, coordenadas principales) y la aplicación del modelo de Harpending y Ward. Desde la genética del paisaje, se realizarán análisis de autocorrelación espacial, barreras genéticas y análisis geoestadísticos (kriging). Para el estudio de los modos de vida a partir del registro bioarqueológico se relevarán patologías dento-alveolares y alteraciones vinculadas con la salud bucal tales como desgaste dental –a nivel micro y macroscópico- caries, abscesos, pérdidas dentales antemortem, cálculos, hipoplasias, marcadores esqueletales de salud y lesiones traumáticas. Se analizarán isótopos estables (δ13C, δ15N, 86Sr y 87Sr) en restos óseos humanos de diversos sitios arqueológicos con el objetivo de reconstruir patrones dietarios y analizar la movilidad residencial y migración de las poblaciones. Paralelamente, se establecerán procedimientos de control tafonómico de los restos óseos, y se harán análisis específicos para estudiar las historias tafonómicas y evaluar el grado de integridad de los contextos de depositación y de las colecciones en general. Estimamos que el análisis de los patrones espaciales y temporales de variabilidad morfológica craneofacial, así como el estudio de las dietas a partir de información isotópica y bioarqueológica, de las migraciones y la movilidad residencial de las poblaciones a partir de isótopos de estroncio, la reconstrucción de comportamientos y actividades cotidianas a partir de marcadores de estrés músculo-esqueletal, en un marco cronológico y espacial constituye un aporte novedoso y eficaz que permitirá incrementar de manera substancial la información sobre la evolución de las poblaciones originarias del centro del territorio argentino. The aim of this project is to study the structure, biological history and lifestyles of the people that inhabitated the central region of Argentina during the Holocene, from a perspective that combines theoretical and methodological contributions of Landscape Genetics and Bioarchaeology. To analyze the spatial patterns of biological variation we consider epigenetic cranial traits, linear measurements and data obtained from geometric morphometric on 2D photographs. Morphological variation will be focused on landscape genetics (autocorrelation, genetic barriers and geostatistical analysis –kriging-) and population structure (matrix R, D², Fst, principal coordinates, Harpendig and Ward model). For the study of lifestyles from bioarchaeological record we consider alveolar pathologies and disorders related to oral health such as tooth wear, micro and macroscopic level, caries, abscesses, antemortem tooth loss, hypoplasia, markers skeletal health and traumatic injuries, as well as taphonomic processes. Stable isotopes will be analyzed (δ13C, d15N, 86Sr and 87Sr) in human skeletal remains from various archaeological sites in order to reconstruct and analyze dietary patterns of residential mobility and migration of populations. It will be established procedures of taphonomic control on skeletal remains, analysis to study taphonomic histories and assess the degree of completeness of depositional context and collection, in general terms. We consider that analysis of spatial and temporal patterns of variability in craniofacial morphology and the study of health and diets from isotopic and bioarchaeological data, migration and residential mobility patterns from strontium isotopes, as well as activity patterns from stress markers is a novel and effective contribution that will substantially increase the information about the local evolution of populations that inhabitated the center of Argentina.

A review of the development of regional sludge treatment centres and a baseline characterisation of Irish sewage sludges

This Study assessed the development of sludge treatment and reuse policy since the original 1993 National Sludge Strategy Report (Weston-FTA, 1993). A review of the 48 sludge treatment centres, current wastewater treatment systems and current or planned sludge treatment and reuse systems was carried out Sludges from all Regional Sludge Treatment Centres (areas) were characterised through analysis of selected parameters. There have been many changes to the original policy, as a result of boundary reviews, delays in developing sludge management plans, development in technology and changes in tendering policy, most notably a move to design-build-operate (DBO) projects. As a result, there are now 35 designated Hub Centres. Only 5 of the Hub Centres are producing Class A Biosolids. These are Ringsend, Killamey, Carlow, Navan and Osberstown. Ringsend is the only Hub Centre that is fully operational, treating sludge from surrounding regions by Thermal Drying. Killamey is producing Class A Biosolids using Autothermal Thermophilic Aerobic Digestion (ATAD) but is not, as yet, treating imported sludge. The remaining three plants are producing Class A Biosolids using Alkaline Stabilisation. Anaerobic Digestion with post pasteurisation is the most common form of sludge treatment, with 11 Hub Centres proposing to use it. One plant is using ATAD, two intend to use Alkaline Stabilisation, seven have selected Thermal Drying and three have selected Composting. While the remaining plants have not decided which sludge treatment to select, this is because of incomplete Sludge Management Plans and on DBO contracts. Analysis of sludges from the Hub Centres showed that all Irish sewage sludge is safe for agricultural reuse as defined by the Waste Management Regulations {Use of Sewage Sludge in Agriculture) (S.I. 267/2001), providing that a nutrient management plan is taken into consideration and that the soil limits of the 1998 (S.I. 148/1998) Waste Management Regulations are not exceeded.

Population dynamics of 0-group flounder (Platichthys flesus L.) in Galway Bay, West of Ireland and the value of flounder from shore angling tourism in Ireland

The economic value of flounder from shore angling around Ireland was assessed. Flounder catches from shore angling tournaments around Ireland were related to domestic and overseas shore angling expenditure in order to determine an economic value for the species. Temporal trends in flounder angling catches, and specimen (trophy) flounder reports were also investigated. Flounder was found to be the most caught shore angling species in competitions around Ireland constituting roughly one third of the shore angling competition catch although this did vary by area. The total value of flounder from shore angling tourism was estimated to be of the order of €8.4 million. No significant temporal trends in flounder angling catches and specimen reports were found. Thus there is no evidence from the current study for any decline in flounder stocks. The population dynamics of 0-group flounder during the early benthic stage was investigated at estuarine sites in Galway Bay, west of Ireland. Information was analysed from the March to June sampling period over five years (2002 to 2006). Spatial and temporal variations in settlement and population length structure were analysed between beach and river habitats and sites. Settlement of flounder began from late March to early May of each year, most commonly in April. Peak settlement was usually in April or early May. Settlement was recorded earlier than elsewhere, although most commonly was similar to the southern part of the UK and northern France. Settlement was generally later in tidal rivers than on sandy beaches. Abundance of 0-group flounder in Galway Bay did not exhibit significant inter -annual variability. 0-group flounder were observed in dense aggregations of up to 105 m'2, which were patchy in distribution. Highest densities of 0-group flounder were recorded in limnetic and oligohaline areas as compared with the lower densities in polyhaline and to a lesser extent mesohaline areas. Measurements to of salinity allowed the classification of beaches, and tidal river sections near the mouth, into a salinity based scheme for length comparisons. Beaches were classified as polyhaline,the lower section of rivers as mesohaline, and the middle and upper sections as oligohaline. Over the March to June sampling period 0-group flounder utilised different sections at different length ranges and were significantly larger in more upstream sections. During initial settlement in April, 0-group flounder of 8-10 mm (standard length, SL) were present in abundance on polyhaline sandy beaches. By about 10mm (SL), flounder were present in all polyhaline, mesohaline and (oligohaline) sections. 0-group flounder became absent or in insignificant numbers in polyhaline and mesohaline sections in a matter of weeks after first appearance. From April to June, 0-group flounder of 12-30mm (SL) were found in more upstream locations in the oligohaline sections. About one month (May or June) after initial settlement, 0-group flounder became absent from the oligohaline sections. Concurrently, flounder start to reappear in mesohaline and polyhaline areas at approximately 30mm (SL) in June. The results indicate 0-group flounder in the early benthic stage are associated with low salinity areas, but as they grow, this association diminishes. Results strongly suggest that migration of 0-group flounder between habitats takes place during the early benthic phase.

An assessment of biological and population parameters of the Common whelk, Buccinum undatum (L.) in the region of the North West Irish whelk fishery

The Common whelk, Buccinum undatum (L.) is a conspicuous benthic scavenger in Irish waters, and is a valuable fisheries resource in South East Ireland. B. undatum is fished in many parts of its range, and previous studies have shown that certain life history parameters, which vary with location, make this species vulnerable to overexploitation. This makes research into each exploited stock essential to ensure sustainable fisheries management of the species. In 2003, interest in B. undatum as a complementary species in the inshore fishery east of the Inishowen Peninsula, North West Ireland, initiated investigation into fisheries related biological and population aspects of the species in this region. The current study presents estimates of spatial variation and density of the stock, size at age and growth rates, size and age at onset of sexual maturity, and timing of reproductive events in the region of the North West Irish whelk fishery for the period of June 2003 to May 2004. Analysis of variance of the total shell length of whelk landings to the fishery was conducted over spatial scales of fishing pot, fishing string and landings to vessels. Landings varied significantly in shell length at the spatial scale at which whelks are attracted to baited pots, but did not vary significantly over larger spatial scales. Depletion estimates of stock density from fisheries derived Catch per Unit Effort data and a mark re-capture experiment estimate 0.134 - 0.227 whelks per m2. Two independent methods of age determination found similar growth logistics functions for B. undatum.Modal analysis of length frequency distribution of landings to the fishery estimated symptotic length, Leo = 151.64 mm and Brody growth coefficient, K = 0.04. Analysis of the striae in individual opercula, where each stria was found to represent annual growth, estimated Loo = 137.73 mm and K = 0.12. Common whelks in the region of the North West Irish whelk fishery grow slowly and are long-lived, with 19 opercula striae recorded in one individual. Onset of sexual maturity is late, and no sex-specific differences in size or age at maturity were determined in the present study. Males were found to achieve sexual maturity at 83.30 ± 10.77 mm, and 8.9 - 11.1 years of age, and females at 82.62 ± 10.68 mm and 8.8 to 11.1 years of age. Systematic observations of reproductive events, including histological changes to the female ovary and male testis, and changes in the size and mass of body components, suggest that breeding occurred between the autumn and winter months of October and December 2003. Biological aspects of B. undatum in the study region are compared with previous studies from other regions, and discussed in relation to sustainable management of the fishery.