Lime mortars with ceramic wastes: characterization of components and their influence on the mechanical behaviour

Considering the fundamental importance of preserving the built heritage and of ensuring the good performance achieved by incorporating ceramic particles in lime mortars in ancient times, it is important to study solutions that use materials the available today, in order to produce mortars intended to repair and replace the old ones. Solutions incorporating industrial ceramic waste might be profitable for several reasons, namely for economic, environmental and technical aspects. In this paper, seven ceramic waste products collected from ceramics factories are characterized. Their mineralogy, dimensional features and pozzolanicity were determined. Three of these products, with different particle size fractions (obtained directly from milling, dust only and fragment fractions only), were selected, incorporated into air lime mortars, and their mechanical strength was determined. In the present work, evidence of mechanical efficiency, when common sand or air lime were partially replaced by ceramic wastes, was made clear, drawing attention to the sustainability of this type of mortars, hence, encouraging further research.

Thermo-hydro-mechanical analysis of CO2 injection into deep aquifers

One of the biggest challenges for humanity is global warming and consequently, climate changes. Even though there has been increasing public awareness and investments from numerous countries concerning renewable energies, fossil fuels are and will continue to be in the near future, the main source of energy. Carbon capture and storage (CCS) is believed to be a serious measure to mitigate CO2 concentration. CCS briefly consists of capturing CO2 from the atmosphere or stationary emission sources and transporting and storing it via mineral carbonation, in oceans or geological media. The latter is referred to as carbon capture and geological storage (CCGS) and is considered to be the most promising of all solutions. Generally it consists of a storage (e.g. depleted oil reservoirs and deep saline aquifers) and sealing (commonly termed caprock in the oil industry) formations. The present study concerns the injection of CO2 into deep aquifers and regardless injection conditions, temperature gradients between carbon dioxide and the storage formation are likely to occur. Should the CO2 temperature be lower than the storage formation, a contractive behaviour of the reservoir and caprock is expected. The latter can result in the opening of new paths or re-opening of fractures, favouring leakage and compromising the CCGS project. During CO2 injection, coupled thermo-hydro-mechanical phenomena occur, which due to their complexity, hamper the assessment of each relative influence. For this purpose, several analyses were carried out in order to evaluate their influences but focusing on the thermal contractive behaviour. It was finally concluded that depending on mechanical and thermal properties of the pair aquifer-seal, the sealing caprock can undergo significant decreases in effective stress.

Ectopic schistosomiasis: description of five cases involving skin, one ovarian case and one adrenal case

Seven cases of patients with ectopic schistosomiasis from the State of Sergipe, Brazil, are presented (five involving skin, one ovarian and one adrenal). Data were collected from surveying the clinical records and anatomopathological reports in the files of the dermatology and pathology clinics of the University Hospital of the Federal University of Sergipe, from 1995 to 2005. The patients' mean age at diagnosis was 21.1 years. In the dermatological cases, full cures were achieved after treatment with oxamniquine. In the ovarian case, there was an association with embryonic carcinoma: this patient underwent surgery with adjuvant chemotherapy and praziquantel treatment, with satisfactory evolution. The adrenal case was associated with adenoma.

Mechanical characterization of aortas using 2D ultrasound elastography

Rupture of aortic aneurysms (AA) is a major cause of death in the Western world. Currently, clinical decision upon surgical intervention is based on the diameter of the aneurysm. However, this method is not fully adequate. Noninvasive assessment of the elastic properties of the arterial wall can be a better predictor for AA growth and rupture risk. The purpose of this study is to estimate mechanical properties of the aortic wall using in vitro inflation testing and 2D ultrasound (US) elastography, and investigate the performance of the proposed methodology for physiological conditions. Two different inflation experiments were performed on twelve porcine aortas: 1) a static experiment for a large pressure range (0 – 140 mmHg); 2) a dynamic experiment closely mimicking the in vivo hemodynamics at physiological pressures (70 – 130 mmHg). 2D raw radiofrequency (RF) US datasets were acquired for one longitudinal and two cross-sectional imaging planes, for both experiments. The RF-data were manually segmented and a 2D vessel wall displacement tracking algorithm was applied to obtain the aortic diameter–time behavior. The shear modulus G was estimated assuming a Neo-Hookean material model. In addition, an incremental study based on the static data was performed to: 1) investigate the changes in G for increasing mean arterial pressure (MAP), for a certain pressure difference (30, 40, 50 and 60 mmHg); 2) compare the results with those from the dynamic experiment, for the same pressure range. The resulting shear modulus G was 94 ± 16 kPa for the static experiment, which is in agreement with literature. A linear dependency on MAP was found for G, yet the effect of the pressure difference was negligible. The dynamic data revealed a G of 250 ± 20 kPa. For the same pressure range, the incremental shear modulus (Ginc) was 240 ± 39 kPa, which is in agreement with the former. In general, for all experiments, no significant differences in the values of G were found between different image planes. This study shows that 2D US elastography of aortas during inflation testing is feasible under controlled and physiological circumstances. In future studies, the in vivo, dynamic experiment should be repeated for a range of MAPs and pathological vessels should be examined. Furthermore, the use of more complex material models needs to be considered to describe the non-linear behavior of the vascular tissue.

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.

First description of autochthonous canine visceral leishmaniasis in the metropolitan region of Vitória, State of Espírito Santo, Brazil

INTRODUCTION: We investigated autochthonous canine visceral leishmaniasis (CVL) in the metropolitan region of Vitória (MRV), an area in which a human case was previously reported. METHODS: Serological, parasitological, and molecular tests were performed in 201 dogs. RESULTS: Twenty-six (13%) and 12 (6%) dogs were identified as positive using in-house enzyme-linked immunosorbent assay (ELISA) and rK39 tests, respectively. Two dogs had a positive culture for Leishmania chagasi, and 4 were polymerase chain reaction (PCR)-positive for Leishmania spp. One positive dog belonged to the aforementioned patient. CONCLUSIONS: Although the responsible vector was not found, our results provide evidence of autochthonous CVL in the MRV, a non-endemic area for VL.

Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on carbonate stones

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Evolution of Teeth and Quadrate in Non-avian Theropoda (Dinosauria: Saurischia), with the Description of Torvosaurus Remains from Portugal

Theropods form a highly successful and morphologically diversified group of dinosaurs that gave rise to birds. They include most, if not all, carnivorous dinosaurs, yet many theropod clades were secondarily adapted to piscivory, omnivory and herbivory, and theropods show a large array of skull and dentition morphologies. This work aims to investigate aspects of the evolution of theropod dinosaurs by analyzing in detail both the anatomy and ontogeny of teeth and quadrates in non-avian theropods, and by studying embryonic and adult material of a new species of theropod. A standardized list of terms and notations for each anatomical entity of the tooth, quadrate, and maxilla is here proposed with the goal of facilitating descriptions of these important cranial and dental elements. The distribution of thirty dental characters among 113 theropod taxa is investigated, and a list of diagnostic dental characters is proposed. As an example, four isolated theropod teeth from the Lourinhã Formation (Kimmeridgian‒Tithonian) of Portugal are described and identified based on a cladistic analysis performed on a data matrix of 141 dentition-based characters coded in 60 taxa. Two shed teeth are referred to an abelisaurid, providing the first record of Abelisauridae in the Jurassic of Laurasia and the one of the oldest records of this clade in the world, suggesting a possible radiation of Abelisauridae in Europe well before the Upper Cretaceous. The consensus tree resulting from this phylogenetic analysis, the most extensive on theropod teeth, indicates that theropod teeth provide reliable data for identification at approximately family level, and this method will help identifying theropod teeth with more confidence. A detailed description of the dentition of Megalosauridae is also provided, and a discriminant analysis performed on a dataset of numerical data collected on the teeth of 62 theropod taxa reveals that megalosaurid teeth are hardly distinguishable from other theropod clades with ziphodont dentition. This study highlights the importance of detailing anatomical descriptions and providing additional morphometric data on teeth with the purpose of helping to identify isolated theropod teeth. In order to evaluate the phylogenetic potential and investigate the evolutionary transformations of the quadrate, a phylogenetic morphometric analysis as well as a cladistic analysis using 98 discrete quadrate related characters were conducted. The quadrate morphology by its own provides a wealth of data with strong phylogenetic signal, and the phylogenetic morphometric analysis reveals two main morphotypes of the mandibular articulation of the quadrate linked to function. As an example, six isolated quadrates from the Kem Kem beds (Cenomanian) of Morocco are determined to be from juvenile and adult individuals of Spinosaurinae based on phylogenetic, morphometric, and phylogenetic morphometric analyses. Morphofunctional analysis of the spinosaurid mandibular articulation has shown that the posterior parts of the two mandibular rami displaced laterally when the jaw was depressed due to a mediolaterally oriented intercondylar sulcus of the quadrate. Such lateral movement of the mandibular ramus was possible due to a movable mandibular symphysis in spinosaurids, allowing the pharynx to be widened. A new species of theropod from the Lourinhã Formation of Portugal, Torvosaurus gurneyi, is erected based on a right maxilla and an incomplete caudal centrum. This taxon supports the mechanism of vicariance that occurred in the Iberian Meseta during the Late Jurassic when the proto-Atlantic was already well formed. A theropod clutch containing several crushed eggs and embryonic material is also assigned to this new species of Torvosaurus. Investigation on the maxilla ontogeny in basal tetanurans reveals that crown denticles, elongation of the anterior ramus, and fusion of interdental plates appear at a posthatchling stage. On the other hand, maxillary pneumaticity is already present at an embryonic stage in non-avian theropods.

Ants in a hospital environment and their potential as mechanical bacterial vectors

Introduction We studied the richness and abundance of ant species, their bacteria and the bacteria isolated from patient clinical samples. Methods Ants were collected with baited traps at 64 sites in a public hospital in São Luis, State of Maranhão, Brazil. Results In total, 1,659 ants from 14 species were captured. The most frequent species were Crematogaster victima, Solenopsis saevissima, Tapinoma melanocephalum, Camponotus vittatus and Paratrechina fulva. Forty-one species of bacteria were isolated from the ants and 18 from patients. Conclusions Ants are potential vehicles for pathogenic and opportunistic bacteria, and they can represent a risk factor in nosocomial infections.

HIV/AIDS-related visceral leishmaniasis: a clinical and epidemiological description of visceral leishmaniasis in northern Brazil

Introduction: This study aimed to describe the main features of visceral leishmaniasis (VL), both related to and independent of human immunodeficiency virus (HIV) infection, in patients who were registered in Tocantins, Brazil. Methods: Data from 1,779 new patients with VL, 33 of whom were also infected with HIV, were reviewed. Results: The incidence of VL/HIV coinfection increased from 0.32/100,000 inhabitants in 2007 to 1.08/100,000 inhabitants in 2010. VL occurred predominantly in children aged 10 years or younger, while VL/HIV was more common in patients aged between 18 and 50 years. There were more male patients in the VL/HIV group than in the VL group. Relapse rates were also considerably higher in the VL/HIV (9.1%) group than in the VL group (1.5%). Despite a similar clinical presentation, VL/HIV patients exhibited a higher proportion (24.2%) of concomitant infectious diseases and jaundice. Pentavalent antimonials were used for the initial treatment of VL and VL/HIV infections. However, amphotericin B deoxycholate and liposomal amphotericin B were also widely used in the treatment of VL/HIV coinfection. The mortality rate was higher in the VL/HIV coinfection group (19.4%) than in the VL group (5.4%). Furthermore, the mortality rate due to other causes was significantly higher in the VL/HIV group (12.9%) than in the VL group (0.7%). Conclusions: The study showed that the incidence, clinical characteristics and outcomes among the VL and VL/HIV patients in this state are similar to those from other endemic regions, indicating that both infections are emerging with increasing frequency in Brazil.

A description of the Australian early psychosis intervention model and a proposal to establish a Pilot Early Intervention Program in Santa Cruz de la Sierra, Bolívia

RESUMO: Em 2011, a Associação Psiquiátrica Mundial lançou um programa de bolsas de investigação para psiquiatras em início de carreira a partir de países de renda baixa ou média-baixa, no âmbito deste programa, o autor foi selecionado para uma bolsa de pesquisa no Centre for Youth Mental Health/Orygen Youth Health Research Centre da Universidade de Melbourne. Orygen, é a principal organização de pesquisa e tradução do conhecimento do mundo com foco em problemas de saúde mental em pessoas jovens. O estágio foi baseado em Prevenção e Intervenção Precoce Psychosis Centre (EPPIC), que faz parte do Orygen. EPPIC fornece programa de tratamento abrangente e integrada, baseada na comunidade para o primeiro episódio de psicose. Esta dissertação descreve o modelo EPPIC, e seus componentes essenciais e fatores que são necessários para uma implementação de serviço direito. Além disso, uma proposta de criação de um programa-piloto de intervenção psicose precoce é discutido. Este programa inclui um programa de extensão inovadora que combina princípios comerciais sólidos, com metas sociais, a fim de combater especificamente a maior barreira para o tratamento da psicose precoce na Bolívia: o estigma da doença mental. Ao utilizar uma equipe de tratamento móvel, multidisciplinar, que enfatiza os papéis dos gerentes do caso treinados focada em fornecer indivíduo intensiva e apoio familiar no lar, este programa irá prestar cuidados culturalmente apropriados que irá alavancar contribuições de um suprimento limitado de psiquiatras e mudar longe da dependência um sistema médico fragmentado. ---------------------------- ABSTRACT: In 2011, the World Psychiatric Association launched a programme of research fellowships for early-career psychiatrists from low- or lower-middle income countries, within this programme, the author was selected to a research fellowship at the Centre for Youth Mental Health/Orygen Youth Health Research Centre at University of Melbourne. Orygen, is the world’s leading research and knowledge translation organization focusing on mental ill-health in young people. The traineeship was based on Early Psychosis Prevention and Intervention Centre (EPPIC), which is part of Orygen. EPPIC provides comprehensive, integrated, community-based treatment program for first-episode psychosis. This dissertation describes the EPPIC model, and its core components and factors which are necessary to a right service implementation. Additionally, a proposal to establish a pilot early psychosis intervention programme is discussed. This programme includes an innovative outreach programme that combines sound business principals with social goals in order to specifically target the largest barrier to early psychosis treatment in Bolivia: the stigma of mental illness. By utilizing a mobile, multidisciplinary treatment team that emphasizes the roles of trained case managers focused on providing intensive individual and family support in the home, this programme will provide culturally appropriate care that will leverage contributions from a limited supply of psychiatrists and shift dependence away from a fragmented medical system.

Description of a newly discovered Triatoma infestans (Hemiptera: Reduviidae) Foci in Ibipeba, State of Bahia, Brazil

Introduction Chagas disease transmitted by the Triatoma infestans was eradicated from Brazil in 2006. However, reports of triatomine foci threaten the control of Chagas disease. The goal of this study was to determine T. infestans foci in the City of Ibipeba, State of Bahia. Methods Triatominae specimens were collected in Ibipeba and entomologic indicators were calculated using indices of domiciliary infestation, density, and colonization. Results T. infestans foci was discovery in Ibipeba, State of Bahia. Approximately 95% of the specimens were discovered inside dwellings, of which 34% were T. infestans. This species was also discovered forming a colony in tree bark in the peridomicile. Conclusions Triatoma infestans foci in peridomestic ecotopes in Ibipeba, BA, indicate increased the risk of transmission Chagas disease.

Description of microsporidia in simulids: molecular and morphological characterization of microsporidia in the larvae of Simulium pertinax Kollar (Diptera: Simuliidae)

IntroductionMicrosporidia constitute the most common black fly pathogens, although the species' diversity, seasonal occurrence and transmission mechanisms remain poorly understood. Infections by this agent are often chronic and non-lethal, but they can cause reduced fecundity and decreased longevity. The objective of this study was to identify microsporidia infecting Simulium (Chirostilbia) pertinax (Kollar, 1832) larvae from Caraguatatuba, State of São Paulo, Brazil, by molecular and morphological characterization.MethodsLarvae were collected at a single point in a stream in a rural area of the city and were kept under artificial aeration until analysis. Polydispyrenia spp. infection was characterized by the presence of at least 32 mononuclear spores measuring 6.9 ± 1.0 × 5.0 ± 0.7µm in persistent sporophorous vesicles. Similarly, Amblyospora spp. were characterized by the presence of eight uninucleate spores measuring 4.5 × 3.5µm in sporophorous vesicles.ResultsThe molecular analysis confirmed the presence of microsporidian DNA in the 8 samples (prevalence of 0.51%). Six samples (Brazilian larvae) were related to Polydispyrenia simulii and Caudospora palustris reference sequences but in separate clusters. One sample was clustered with Amblyospora spp. Edhazardia aedis was the positive control taxon.ConclusionsSamples identified as Polydispyrenia spp. and Amblyospora spp. were grouped with P. simulii and Amblyospora spp., respectively, corroborating previous results. However, the 16S gene tree showed a considerable distance between the black fly-infecting Amblyospora spp. and the mosquito-infecting spp. This distance suggests that these two groups are not congeneric. Additional genomic region evaluation is necessary to obtain a coherent phylogeny for this group.

Description and characterization of the melanic morphotype of Rhodnius nasutus Stål, 1859 (Hemiptera: Reduviidae: Triatominae)

IntroductionFor the first time we provide the description of the melanic (dark) morphotype of Rhodnius nasutus and determine the pattern of genetic inheritance for this characteristic.MethodsDark morph R. nasutus specimens were crossbred with standard (typically patterned) R. nasutus.ResultsWe present the first occurrence of the melanic morphotype in the genus Rhodnius. The crossbreeding results demonstrate that the inheritance pattern of this characteristic follows Mendel's simple laws of segregation and an independent assortment of alleles.ConclusionsPhenotypic variation of R. nasutus reinforces the heterogeneity found in the Triatominae. Descriptions of new species in this subfamily require rigorous validation criteria.

Description of continuous data using bar graphs: a misleading approach

INTRODUCTION:With the ease provided by current computational programs, medical and scientific journals use bar graphs to describe continuous data.METHODS:This manuscript discusses the inadequacy of bars graphs to present continuous data.RESULTS:Simulated data show that box plots and dot plots are more-feasible tools to describe continuous data.CONCLUSIONS:These plots are preferred to represent continuous variables since they effectively describe the range, shape, and variability of observations and clearly identify outliers. By contrast, bar graphs address only measures of central tendency. Bar graphs should be used only to describe qualitative data.