High pressure induced changes on sarcoplasmic protein fraction and quality indicators

The combined effect of pressure and mild temperature treatments on bovine sarcoplasmic proteins and quality parameters was assessed. M. longissimus dorsi samples were pressurised in a range of 200–600 MPa and 10–30 °C. High Pressure Processing (HPP) induced a reduction of protein solubility (p < 0.001) compared to non-treated controls (NT), more pronounced above 200 MPa. HPP at pressures higher than 200 MPa induced a strong modification (p < 0.001) of meat colour and a reduction of water holding capacity (WHC). SDS–PAGE analysis demonstrated that HPP significantly modified the composition of the sarcoplasmic protein fraction. The pressurisation temperature mainly affected protein solubility and colour; a smaller effect was observed on protein profiles. Significant correlations (p < 0.001) between sarcoplasmic protein solubility and both expressible moisture (r = −0.78) and colour parameters (r = −0.81 to −0.91) suggest that pressure induced denaturation of sarcoplasmic proteins could influence to some extent WHC and colour modifications of beef. Changes in protein band intensities were also significantly correlated with protein solubility, meat lightness and expressible moisture. These results describe the changes induced by HPP on sarcoplasmic proteins and confirm a relationship between modification of the sarcoplasmic protein fraction and alteration of meat quality characteristics

Surface-enhanced laser desorption/ionisation time-of-flight mass spectrometry: A tool to predict pork quality

Expression of water soluble proteins of fresh pork Longissimus thoracis from 4 pure breed pigs (Duroc, Large White, Landrace, and Piétrain) was studied to identify candidate protein markers for meat quality. Surface-enhanced laser desorption/ionisation time-of-flight mass spectrometry (SELDI-TOF-MS) was used to obtain the soluble protein profiles of Longissimus thoracis muscles. The pure breeds showed differences among the studied meat quality traits (pHu, drip loss, androstenone, marbling, intramuscular fat, texture, and moisture), but no significant differences were detected in sensory analysis. Associations between protein peaks obtained with SELDI-TOF-MS and meat quality traits, mainly water holding capacity, texture and skatole were observed. Of these peaks, a total of 10 peaks from CM10 array and 6 peaks from Q10 array were candidate soluble protein markers for pork loin quality. The developed models explained a limited proportion of the variability, however they point out interesting relationships between protein expression and meat quality

Analysis of raw hams using SELDI-TOF-MS to predict the final quality of dry-cured hams

The relationship between protein profiles of Gluteus medius (GM) muscles of raw hams obtained from 4 pure breed pigs (Duroc, Large White, Landrace, and Piétrain) with the final quality of the Semimembranosus and Biceps femoris muscles of dry-cured hams was investigated. As expected, Duroc hams showed higher levels of marbling and intramuscular fat content than the other breeds. Piétrain hams were the leanest and most conformed, and presented the lowest salt content in dry-cured hams. Even if differences in the quality traits (colour, water activity, texture, composition, intramuscular fat, and marbling) of dry-cured hams were observed among the studied breeds, only small differences in the sensory attributes were detected. Surface-enhanced laser desorption/ionisation time-of-flight mass spectrometry (SELDI-TOF-MS) was used to obtain the soluble protein profiles of GM muscles. Some associations between protein peaks obtained with SELDI-TOF-MS and quality traits, mainly colour (b*) and texture (F0, Y2, Y90) were observed. Candidate protein markers for the quality of processed dry-cured hams were identified

Grain yield and seed quality of soybean selected for high protein content

The objective of this work was to evaluate the effects of selection for high protein on seed physiological quality and grain yield of soybean. Four populations of BC1F4 and four of F4, each from a cross between a commercial variety and a line bearing high protein seeds, were used. The high protein content selection has a tendency to affect negatively the seed physiological quality. Estimates of correlation coefficients between protein content and grain yield were mostly negative but varied among populations. It is possible to obtain lines with high protein content, keeping the grain yield and the seed physiological quality of their respective recurrent progenitors.

Automated identification of minimal myocardial motion for improved image quality on MR angiography at 3 T

OBJECTIVE: Imaging during a period of minimal myocardial motion is of paramount importance for coronary MR angiography (MRA). The objective of our study was to evaluate the utility of FREEZE, a custom-built automated tool for the identification of the period of minimal myocardial motion, in both a moving phantom at 1.5 T and 10 healthy adults (nine men, one woman; mean age, 24.9 years; age range, 21-32 years) at 3 T. CONCLUSION: Quantitative analysis of the moving phantom showed that dimension measurements approached those obtained in the static phantom when using FREEZE. In vitro, vessel sharpness, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) were significantly improved when coronary MRA was performed during the software-prescribed period of minimal myocardial motion (p < 0.05). Consistent with these objective findings, image quality assessments by consensus review also improved significantly when using the automated prescription of the period of minimal myocardial motion. The use of FREEZE improves image quality of coronary MRA. Simultaneously, operator dependence can be minimized while the ease of use is improved.

Body temperature and fur quality in swimming Water-Shrews, Neomy fodiens (Mammalia, Insectivora)

Body temperature of the European water-shrew Neomys fodiens was reinvestigated with intraperitoneally implanted radiotransmitters. Two animals, caged in outdoor conditions, were tested during February and March. Mean body temperature (Tb) during rest was 37.0°C, during activity 37.5°C. During stress of capture Tb increased to 38.4°C, and during a social confrontation mean Tb was 39.4°C. During forced swimming Tb decreased at a rate of 1.1°C per minute in an animal with wet fur. However, when kept in adequate conditions, animals could maintain their body temperature at a level of about 37°C in most of the tested situations. In water of 2.6°C, mean Tb after 6 min of forced swimming or diving was 37.4°C, comparable to Tb terrestrial activity. In these animals the fur remained dry even on its surface. The pelt of these shrews has a hydrophobic property which seems to be unique compared to other semiaquatic mammals.

The Conservativeness of the Central Bank when Institutional Quality is Poor

We propose an extension of Alesina and Tabellini 's model (1987) to include corruption, which is understood as the presence of weak institutions collecting revenue through formal tax channels. This paper analyses how conservative should an independent central bank be when the institutional quality is poor. When there are no political distortions, we show that the central bank has to be more conservative than the government, except with complete corruption. In this particular case, the central bank should be as conservative as the government. Further, we obtain that the relationship between the optimal relative degree of conservativeness of the central bank and the degree of corruption is affected by supply shocks. Concretely, when these shocks are not important, the central bank should be less conservative if the degree of corruption increases. However, this result may not hold when the shocks are relevant. JEL classi fication: D6, D73, E52, E58, E62, E63. Keywords: Central Bank Conservativeness; Corruption; Fiscal Policy; Monetary Policy; Seigniorage.

Abatacept improves health-related quality of life, pain, sleep quality, and daily participation in subjects with juvenile idiopathic arthritis.

OBJECTIVE: To assess health-related quality of life (HRQOL) in abatacept-treated children/adolescents with juvenile idiopathic arthritis (JIA). METHODS: In this phase III, double-blind, placebo-controlled trial, subjects with active polyarticular course JIA and an inadequate response/intolerance to ≥1 disease-modifying antirheumatic drug (including biologics) received abatacept 10 mg/kg plus methotrexate (MTX) during the 4-month open-label period (period A). Subjects achieving the American College of Rheumatology Pediatric 30 criteria for improvement (defined "responders") were randomized to abatacept or placebo (plus MTX) in the 6-month double-blind withdrawal period (period B). HRQOL assessments included 15 Child Health Questionnaire (CHQ) health concepts plus the physical (PhS) and psychosocial summary scores (PsS), pain (100-mm visual analog scale), the Children's Sleep Habits Questionnaire, and a daily activity participation questionnaire. RESULTS: A total of 190 subjects from period A and 122 from period B were eligible for analysis. In period A, there were substantial improvements across all of the CHQ domains (greatest improvement was in pain/discomfort) and the PhS (8.3 units) and PsS (4.3 units) with abatacept. At the end of period B, abatacept-treated subjects had greater improvements versus placebo in all domains (except behavior) and both summary scores. Similar improvement patterns were seen with pain and sleep. For participation in daily activities, an additional 2.6 school days/month and 2.3 parents' usual activity days/month were gained in period A responders with abatacept, and further gains were made in period B (1.9 versus 0.9 [P = 0.033] and 0.2 versus -1.3 [P = 0.109] school days/month and parents' usual activity days/month, respectively, in abatacept- versus placebo-treated subjects). CONCLUSION: Improvements in HRQOL were observed with abatacept, providing real-life tangible benefits to children with JIA and their parents/caregivers.

Qualité de vie après traitement de l'insuffisance veineuse superficielle primaire. [Quality of life in patients traited for primary superficial venous insufficiency].

Venous symptoms and quality of life (QOL) of 78 patients (54 women, mean age 49,5±13,3 years) with primary superficial venous insufficiency (PSVI) were compared at one year after treatment with crossectomy and stripping (C/S, 56 patients) or endovenous laser ablation (EVLA, 22 patients) using the VEINES-QOL questionnaire. Both treatments significantly (p<0,001) improved the scores for venous symptoms (difference 10,6±9,9 and 9,9±8,2 score points for C/S and EVLA, respectively) and QOL (difference 10,3±8,7 and 8,4±6,6 score points for C/S and EVLA, respectively). No difference was found between treatments regarding symptoms or QOL improvement (p=0,30). We conclude that C/S and EVLA are equally effective in improving symptoms and QOL in PSVI.

Effects of an early intervention on maternal post-traumatic stress symptoms and the quality of mother-infant interaction: The case of preterm birth

Preterm birth may represent a traumatic situation for both parents and a stressful situation for the infant, potentially leading to difficulties in mother-infant relationships. This study aimed to investigate the impact of an early intervention on maternal posttraumatic stress symptoms, and on the quality of mother-infant interactions, in a sample of very preterm infants and their mothers. Half of the very preterm infants involved in the study (n=26) were randomly assigned to a 3-step early intervention program (at 33 and 42 weeks after conception and at 4 months' corrected age). Both groups of preterm infants (with and without intervention) were compared to a group of full-term infants. The impact of the intervention on maternal posttraumatic stress symptoms was assessed 42 weeks after conception and when the infants were 4 and 12 months of age. The impact of the intervention on the quality of mother-infant interactions was assessed when the infants were 4 months old. Results showed a lowering of mothers' posttraumatic stress symptoms between 42 weeks and 12 months in the group of preterm infants who received the intervention. Moreover, an enhancement in maternal sensitivity and infant cooperation during interactions was found at 4 months in the group with intervention. In the case of a preterm birth, an early intervention aimed at enhancing the quality of the mother-infant relationship can help to alleviate maternal post-traumatic stress symptoms and may have a positive impact on the quality of mother-infant interactions.

Development of Quality Standards for Inclusion of High Recycled Asphalt Pavement Content in Asphalt Mixtures – Phase II, TR-658, 2015

To conserve natural resources and energy, the amount of recycled asphalt pavement has been steadily increasing in the construction of asphalt pavements. The objective of this study is to develop quality standards for inclusion of high RAP content. To determine if the higher percentage of RAP materials can be used on Iowa’s state highways, three test sections with target amounts of RAP materials of 30%, 35% and 40% by weight were constructed on Highway 6 in Iowa City. To meet Superpave mix design requirements for mixtures with high RAP contents, it was necessary to fractionate the RAP materials. Three test sections with actual RAP materials of 30.0%, 35.5% and 39.2% by weight were constructed and the average field densities from the cores were measured as 95.3%, 94.0%, and 94.3%, respectively. Field mixtures were compacted in the laboratory to evaluate moisture sensitivity using a Hamburg Wheel Tracking Device. After 20,000 passes, rut depths were less than 3mm for mixtures obtained from three test sections. The binder was extracted from the field mixtures from each test section and tested to identify the effects of RAP materials on the performance grade of the virgin binder. Based on Dynamic Shear Rheometer and Bending Beam Rheometer tests, the virgin binders (PG 64-28) from test sections with 30.0%, 35.5% and 39.2% RAP materials were stiffened to PG 76-22, PG 76-16, and PG 82-16, respectively. The Semi-Circular Bending (SCB) test was performed on laboratory compacted field mixtures with RAP amounts of 30.0%, 35.5% and 39.2% at two different temperatures of -18 and -30 °C. As the test temperature decreased, the fracture energy decreased and the stiffness increased. As the RAP amount increased, the stiffness increased and the fracture energy decreased. Finally, a condition survey of the test sections was conducted to evaluate their short-term pavement performance and the reflective transverse cracking did not increase as RAP amount was increased from 30.0% to 39.2%.

Assessment of Nondestructive Testing Technologies for Quality Control/Quality Assurance of Asphalt Mixtures, TR-653, 2015

Asphalt pavements suffer various failures due to insufficient quality within their design lives. The American Association of State Highway and Transportation Officials (AASHTO) Mechanistic-Empirical Pavement Design Guide (MEPDG) has been proposed to improve pavement quality through quantitative performance prediction. Evaluation of the actual performance (quality) of pavements requires in situ nondestructive testing (NDT) techniques that can accurately measure the most critical, objective, and sensitive properties of pavement systems. The purpose of this study is to assess existing as well as promising new NDT technologies for quality control/quality assurance (QC/QA) of asphalt mixtures. Specifically, this study examined field measurements of density via the PaveTracker electromagnetic gage, shear-wave velocity via surface-wave testing methods, and dynamic stiffness via the Humboldt GeoGauge for five representative paving projects covering a range of mixes and traffic loads. The in situ tests were compared against laboratory measurements of core density and dynamic modulus. The in situ PaveTracker density had a low correlation with laboratory density and was not sensitive to variations in temperature or asphalt mix type. The in situ shear-wave velocity measured by surface-wave methods was most sensitive to variations in temperature and asphalt mix type. The in situ density and in situ shear-wave velocity were combined to calculate an in situ dynamic modulus, which is a performance-based quality measurement. The in situ GeoGauge stiffness measured on hot asphalt mixtures several hours after paving had a high correlation with the in situ dynamic modulus and the laboratory density, whereas the stiffness measurement of asphalt mixtures cooled with dry ice or at ambient temperature one or more days after paving had a very low correlation with the other measurements. To transform the in situ moduli from surface-wave testing into quantitative quality measurements, a QC/QA procedure was developed to first correct the in situ moduli measured at different field temperatures to the moduli at a common reference temperature based on master curves from laboratory dynamic modulus tests. The corrected in situ moduli can then be compared against the design moduli for an assessment of the actual pavement performance. A preliminary study of microelectromechanical systems- (MEMS)-based sensors for QC/QA and health monitoring of asphalt pavements was also performed.

Heterosis in crosses among white grain maize populations with high quality protein

The objective of this work was to investigate heterosis and its components in 16 white grain maize populations presenting high quality protein. These populations were divided according to grain type in order to establish different heterosis groups. The crosses were carried out according to a partial diallel cross design among flint and dent populations. Seven agronomic traits were evaluated in three environments while four leaf diseases and incidence of corn stunt were evaluated in one. Least square procedure was applied to the normal equation X'Xbeta = X'Y, to estimate the model effects and their respective sum of squares. Among the heterosis components, in diallel analysis, significance for average heterosis in grain yield, number of days to female flowering and to all evaluated diseases was detected. Specific heterosis was significant for days to female flowering and resistance to Puccinia polysora. Results concerned to grain yield trait indicate that populations with superior performance in dent group, no matter what flint population group is used in crosses, tend to generate superior intervarietal hybrids. In decreasing order of preference, the dent type populations CMS 476, ZQP/B 103 and ZQP/B 101 and the flint type CMS 461, CMS 460, ZQP/B 104 and ZQP/B 102 are recommended to form composites.