Osteologia craniana comparada de Caracara cheriway (Jacquin, 1784) e Caracara plancus (Miller, 1777) (AVES: FALCONIDAE)

The Caracara genus (Aves: Falconidae) is composed by species C. cheriway, ("Crested Caracara"), and C. plancus (Southern Caracara). This study aimed to describe in detail and compared the cranial osteology of C. cheriway and C. plancus, identifying osteological cranial characters for a future systematic work. The two common characters of Caracara species are: the projection of rostro parasphenoid reaches 50% of the distance from the occipital condyle to the pterygoid; the upper maxilla has about 4/9 of the total length of theskull, the symphysial portion of mandible occupies about 1/7 of its total length, the proximal portion of lacrimal bone ends in a rounded shape and has about 1/4 of the width of the distal portion. The unique characters of C. cheriway are: the interorbital width is about 1/2 of the parietal region, shows a frontal bone prominence; presence of lacrimal process of frontal bone; the proximal portion of the lacrimal bone reaches 1/5 of the distance from the orbital arc to the jugal bone; the distance between the distal portions of two lacrimal bones reach 5/6 of the parietal width, the ratio between the interorbital diameter and parietal region ranges from 2 times; the zygomatic process occupies about 40% of the distance between its origin in the skull and jugal bone. The unique characters of C. plancus are: the interorbital width is approximately 4/7 of the parietal width; show a rostral medial concavity; the proximal portion of the lacrimal bone is about 1/4 of the width of the distal; the proximal portion of the lacrimal bone reaches 1/7 of the distance from the orbital arc to the jugal bone; the distance between the distal portions of two lacrimal bones reaches 6/7 of the width parietal one; the ratio between the interorbital diameter and parietal region varies 1, 75 times, the zygomatic process occupies about 35% of the distance between its origin in the skull and jugal bone.

Arranjo de semeadura da soja sobre o rendimento da cultura e da tecnologia de aplicação de produtos fitossanitários

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Subsídios geomorfológicos para a avaliação da sensibilidade ambiental ao óleo: o caso do baixo curso do rio Tietê (SP)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo das aplicações das variedades de um quartzo-sienito com hiperstênio, como rochas ornamentais, com auxílio da caracterização tecnológica e das análises de cor e imagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do uso de uma estrutura de nylon modificada como reforço de prótese totalmente acrílica implantossuportada

Pós-graduação em Odontologia Restauradora - ICT

Considerações sobre planejamento de eclusagens na hidrovia Tietê-Paraná

Pós-graduação em Engenharia de Produção - FEB

Demanda energética de máquinas agrícolas na implantação da cultura do sorgo forrageiro

Forage sorghum can be grown in areas and environmental conditions dry and warm, where the productivity of other forage plants can often be uneconomical. The soil disturbance can be made only on the lines of planting (direct seeding) or entirely from the area for seeding (conventional tillage), as plowing, harrowing, subsoiling and chiseling (minimum tillage). The displacement speed ideal for planting is one in which the groove is opened and closed without removing the over-ground, allowing the distribution of seed spacing and depth constant. The experiment was conducted in a soil classified as Typic Oxisol at Lageado Experimental Farm, Faculty of Agronomic Sciences, UNESP, Botucatu campus. This study aimed to evaluate the response of sorghum in four forward speeds (3, 5, 6 and 9 km h-1) and four systems of soil management: SD (direct seeding), GP (harrow + sowing), LPG (disc harrow and two light disking + sowing) and CR (scarification and seeding). Data was subjected to analysis of variance in a factorial 4 x 4 and a randomized block design with split plots. The following parameters were determined: average speed, average strength of the drawbar, the average power drawbar, theoretical field capacity of the tractor-equipment, fuel consumption per hour. For the conditions under which the experiment was conducted, it was concluded that the hourly fuel consumption was not influenced by tillage systems and was inversely proportional to the increase of speed work, and that the change of speed in the sowing operation did not provide additional the values of average traction force on the bar of the tractor-planter.

Cultivo da cana-de-açúcar e o uso do solo em áreas de preservação permanente

This study aimed to recognize the significant temporal changes in land use between 1984 and 2008 in Barra Bonita City/ SP and to analyze the conflicts of land use in permanent preservation areas (PPA) with reference to the Forest Code and Resolution N. 303/2002 of CONAMA. The GIS Idrisi Andes 5.0 – geographic information system was used and the images were processed by LANDSAT TM5. Maps of land use were obtained by Maxver supervised classification and showed that in 1984 the area occupied by sugar cane crop was about 10.50 ha (70%) in 1984 and 10.90 ha in 2008. In analysis of conflicts about land use in permanent preservation areas showed that in 24 years the sugar-cane crops increased 3.6% on PPA. The occupation was represented by adequate forest of 279.25 ha (31.5% of total) in 1984. In 2008, the sugar-cane crop was the biggest conflict in PPA occupying 357.9 ha and 11.4% corresponds to areas in preparation for use. This year, 59.5% of total PPA is at odds with environmental legislation.

Influência do desgaste das garras dos pneus e das condições superficiais do solo nas operações de campo de um trator agrícola

The objective of this work was to compare the performance of a tractor equipped with used and new bias-ply tires (63.4% and 41.2%, front and rear tire waste, respectively), in three surface conditions: tillage soil, vegetal covered soil and firm soil. Field data were collected to calculate: forward speed, front and rear slippage tires, drawbar pull, available power at drawbar bar and fuel consumption. Results showed that both, tires and soil conditions, changed tractor capacity on developing drawbar traction. The worst performance was observed on tillage soil. The best performance of the tractor was observed at firm soil track. On the track with tilled soil, results showed that the forward speed was the lowest among the three soil conditions due to the front and rear slippage tires which was higher than vegetal covered and firm soil tracks. Fuel consumption results showed higher values on tilled tracks when compared with firm and vegetal covered tracks. The fuel consumption levels evaluated on bias-ply tires lead to significant changes on tractor’s performance at tilled soil, indicating that, at this condition, it’s necessary to replace the used tires by new tires. For vegetal covered soil operations, and also on firm soil conditions, used tires, at studied levels, indicated that these tires might still be used without tractor performance changing.

Avaliação do tempo de resposta de um controlador de fluxo com DGPS submetido à variação de velocidade de voo em condições de voo simulado em laboratório

The application of pesticides is one of the most important steps in the agricultural production process. The spray volume can directly affect application success, and this parameter is directly dependent on the displacement speed of the sprayer. In conventional systems, the operator has to maintain a constant speed to ensure uniform application along the tracks. In order to improve over application quality and preserve levels of precision for applied doses; the use of electronic flow control systems allows for automatic adjustment of volume applied over the area when there is a change in velocity during application. The objective of this research was to study the response times of a flow controller with DGPS for aerial application subjected to variations of velocity in laboratory simulated flight conditions. For this purpose, a bench test has been developed including software for simulating DGPS signals, which was used to simulate different flight speeds and conditions. The results showed the average response time from the flow controller to a change in velocity to be between 6 and 20 seconds. Variations in total flow and the controller setting had a significant influence on response time with situations where there was interaction between the factors being evaluated. There was a tendency for better response times using a constant setting for the control algorithm other than that specified by the manufacturer. The flow controller presented an average error rates below 2% in all evaluated operating conditions, providing satisfactory accuracy in determining the output of product in different test situations.

Equipamentos de pulverização associados a volumes de calda e avaliados por alvos artificiais em cafeeiro

The aim of this study was to evaluate the quality of spray droplet spectrum on coffee tree, by using different equipments and syrup volumes. The experiment was set up in a coffee farm, Acaiá variety, Campos Gerais city, MG, Brazil. The treatments were three syrup volumes (150, 300 and 600 L/ha). The lower volume was sprayed with the pneumatic sprayer Martignani, Whirlwind B612 Autonom-Trac mode, and the other volume rates using the conventional hydraulic sprayer to coffee tree. It was possible concludes that the spray volume can be reduced in applications on coffee tree using the pneumatic sprayer.

Geomática aplicada na caracterização conservacionista de uma bacia hidrográfica no município de São Manuel (SP)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fluxo de potência continuado baseado em equações de injeção de corrente expressas em coordenadas polares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biologia populacional do caranguejo fantasma Ocypode quadrata (Fabricius, 1787) (Decapoda, Ocypodidae) no litoral sudeste do Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Parameterization of bio-optical models for estimating chlorophyll-a concentration in a tropical eutrophic reservoir

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)