利用~1H-核磁共振谱计算环化丁苯橡胶的环化度和溶剂参与量

对环化丁苯橡胶的1 H 核磁共振谱进行了归属分析 ,并推导出计算环化度和溶剂参与量的公式。设环化丁苯橡胶的1 H 核磁共振谱图中化学位移为 7 0 ,5 4,4 9和 3 0～ 0处的峰强度分别为A ,B ,C和D ,则环化丁苯橡胶中丁二烯总物质的量 (X) =(B +C +D - 2A) /7 1 ,未环化的丁二烯物质的量 (Y) =B/2 +C/4,参与反应的二甲苯物质的量 (Z) =( 1 7 5A -B -C -D) /46 5,环化度 (P) =1 -Y/X ,溶剂参与量 (W ) =91 6Z/X。

Eu(Ⅲ)、Tb(Ⅲ)双酞菁配合物的合成及其LB膜的荧光性

合成了八-4-（正壬氧基）酞菁铽（Ⅲ）（A）、八-4-（四氢糠氧基）酞菁（Ⅲ）（B）、双酞菁铽（Ⅲ）（C）、八-4-硝基酞菁铽（Ⅲ）（D）,并通过元素分析、红外光谱、质谱和紫外.可见光谱加以确认。配合物B的π-A曲线表明它有很好的成膜性,Y型沉积形成的LB膜材料有很强的荧光响应,随着LB膜厚度的增加,荧光性增强掺杂邻菲咯啉形成的混合LB膜,其荧光性比纯膜强。n（配合物B）：n（邻菲咯啉）＝1：10时有最好的荧光行为.

Structure and Conformation of 2,3,6, 7,10,11-hexakispentyloxytriphenylene by TEM and Computer Simulation

Experimental electron diffraction patterns and high resolution images were used to determine the space group and unit cell dimensions of 2,3,6,7,10,11-hexakispentyloxytriphenylene. Subsequently the molecular conformation was calculated by energy minimized package in Cerius2. Using this method, we got the HPT crystal structure: space group: P6/mmm; lattice type: hexogonal; the lattice parameters are a = b = 20.3 angstrom, c = 3.52 angstrom, = = 90 degrees, = 120 degrees. The core of HPT is not perpendicular to the column. The angle between a axis and HPT core plane is 9 degrees which cannot be seen in b-c projection. The simulated ED patterns and HREM images are good agreement with the experimental ED patterns and HREM images.

Effect of the fold surface of the lamellae on the behavior of the trapped radicals in irradiated polyamide-1010

Two types of macromolecular free radicals -CH2CONHCHCH2- (a) and -CH2C=O (b) trapped in irradiated Polyamide-1010 (PA1010) and PA1010 filled with neodymium oxide (Nd2O3) were characterized by an ESR approach. It was found out that a was mainly trapped in the fold surface of the lamellae and b in the amorphous phase. This result suggested that trapped radicals mainly existed in the noncrystalline phases. The effect of the fold surface area of the lamellae on the behavior of the trapped radicals are discussed in this article. Whether for the specimens with similar crystallinities but different crystallite sizes or for those with the same concentration of neodymium oxide but different crystallinities, radical a exists dominantly in a specimen with a larger fold surface area of the lamellae. Under a certain circumstance, radical a can transform into radical b for a specimen with a larger fold surface area of the lamellae. It means that the fold surface area of the lamellae plays an important role in the transformation of radical a to b. (C) 1998 John Wiley & Sons, Inc.

Synthesis, structure and properties of alpha-Keggin-type of K6H3[ZnW11O40Al]center dot 9.5H(2)O

A new heteropolycomplex, K6H3[ZnW11O40Al] . 9.5H(2)O was prepared and characterized by means of elemental analysis, IR, UV spectroscopy, Al-27 NMR, electrochemistry and X-ray crystallography. The crystal of K6H3[ZnW11O40Al] . 9.5H(2)O is cubic, space group Fm-3m, with lattice constants a=b=c=2. 144 8(2) nm, V = 9.866(2) nm(3), Mo radiation, R = 0.057 8 for 497 independent data with [I>2 delta(I)]. The anion is of alpha-type Keggin structure with C-s symmetry.

Variation of crystallographic parameters in PEEKK with heat treatment temperature

Using the wide-angle X-ray diffraction method, the variation of crystallographic parameters of poly(aryl ether ether ketone ketone) (PEEKK) has been studied in different heat treatment temperatures. All the reflections and their intensities as well as their Miller indices are presented in detail according to an orthorhombic system. The investigation indicates that the unit cell parameters a, b, c and the unit cell volume V systematically decrease with increasing heat treatment temperature. This variation is interpreted by the change of conformation of polymer molecular chains during thermal treatment. The results calculated from the formula of degree of crystallinity (W-c,W-x) for PEEKK, which was derived based on X-ray scattering intensity theory and the graphic multipeak resolution method, are compatible with the density measurement (W-c,W-d) and calorimetry (W-c,W-h) values. (C) 1997 Elesevier Science Ltd.

ESR approach to free radicals trapped in irradiated polyamide-1010

Two types of macromolecular free radicals similar to CH2CONH(C) over dotHCH(2) similar to (a) and similar to CH2(C) over dot = O (b) trapped in irradiated polyamide-1010 (PA1010) and PA1010 filled with neodymium oxide (Nd2O3) were characterized by an ESR approach. It is found that (a) is prevailingly trapped in the fold surface of the lamellae and (b) in the amorphous phase. This result suggests that trapped radicals mainly exist in the non-crystalline phases. The effect of the fold surface area of the lamellae on the behavior of the trapped radicals is discussed in this paper. Whether for the specimens with similar crystallinities, but different crystallite sizes, or for those with the same concentration of neodymium oxide, but different crystallinities, radical (a) exists dominantly in the specimen with a larger fold surface area of the lamellae. Under certain circumstances, radical (a) can transform into radical (b), obviously for a specimen with a larger fold surface area of the lamellae. It means that the fold surface area of the lamellae plays an important role in the transformation of radical (a) to (b). (C) 1997 Elsevier Science Ltd.

Study on the microstructure and properties of nanosized stannic oxide powders

Stannic oxide xerogel was prepared by a forced hydrolysis method using SnCl4 as the precursor. The average grain sizes of the nanosized stannic oxide powders varied with the sintering temperatures. The powders were characterized by several different physico-chemical techniques. TEM was employed for the direct observation on grain sizes, shape and state of aggregation of the particles. XRD technique was used for the determination of the crystalline structure. Microstructural parameters of average crystallite size () and mean-square root microstrain (epsilon(2)>(1/2)) for the samples were calculated from the broadened values of the half-peak intensity of XRD. The atomic ratio between oxygen and tin in the surface region of the particles was estimated through the analysis of XPS. Attributing to lots of oxygen vacancies in the surface region of the nanoparticulates and the 'trapped electrons' in the vacancies, an ESR signal was observed in the sample sintered at 300 degrees C for 2 h. FTIR of the powders showed that intensity of the transverse optical mode of Sn-O stretching vibration increased with the sintering temperature while the bending vibration of O-Sn-O showed a blue shift. For Raman spectra, very important spectral characteristics such as variations of intensity and width of the bands were observed. A new Raman vibrational band located at 572 cm(-1) was identified in the samples of nanosized stannic oxide powders. Variation of these spectroscopic properties were strongly affected by grain size, shape and state of aggregation of the nanosized particulates.

Preparation of Pb-Ca-Na master alloy using molten chloride salt electrolysis

An electrolysis technique for co-deposition of Ca2+ and Na+ at the liquid lead cathode was put forward. The experiment was carried out at an electrolysis temperature below 650 degrees C and had a current efficiency of 98%, which are respectively 100 similar to 300 degrees C lower and 15% similar to 30% higher than those reported both at home and abroad.

STUDY ON THE NON-STIOCHIOMETRIC SNO2-X NANOCRYSTALLINE MATERIAL BY XRD, XPS AND ESR

Nonstiochiometric SnO2-x nanocrystalline material were successfully prepared through Sol-Gel process using anhydrous stannic chloride and iso-propyl alcohol. TEM observation shows that the mean diameter of the powder sintered at 700 degrees C for 2 hours is about 20 nm. By the investigation of XRD and ESR, we can conclude that the sample sintered at 300 degrees C for 2 hours was amorphous and it grew into nanocrystalline with the oxygen vacancies and defects when sintered at 700 degrees C for 2 hours. Using these conclusion, the ESR signals and the difference between the two SnO2-x samples are explained.

THERMAL BEHAVIORS OF INTRINSIC POLYANILINE AND ITS DERIVATIVES

Thermal properties of polyaniline (PAn), polytoluidine(POT) and polyanisidine(PAs) were examined by TG and DSC techniques. The weight-uptake of POT at 200-300 degrees C was observed and carefully discussed.

大豆杂种后代过氧化物酶同工酶谱类型及其与亲本关系的分析

采用聚丙烯酰胺凝胶垂直板电泳方法分析有亲缘关系的37个品种(包括15个品种的亲本来源)萌发6天的大豆子叶POD同工酶谱。结果表明,不同品种POD同工酶谱共显示5～10条酶带,分A、B、C三区。以B区酶带色度深浅及数目变化为分类标准,可分为四种酶型:PB_1型、PB_2型、PB_3型和PB_4型。根据此酶型分析了每一个组合的品种与其两亲本。其中6个品种呈现偏父本酶型,6个品种呈现新酶型,2个品种的酶型与父母相同,1个品种呈现偏母本酶型。同时测定了13个组合的36个品种的POD比活力,结果指出:后代品种POD比活力都低于或介于父母本之间,后代比双亲POD比活力有逐渐降低的趋势。

含酚酞侧基聚芳醚砜的辐射交联

研究了含酚酞侧基聚芳醚砜(PES-C)的辐射效应,发现在真空下通过γ射线辐照,PES-C发生交联。而且在高温下PES—C的辐射交联程度比在常温下的高。在25℃下,PES-C的凝胶化剂量为6.6×10~5Gy。而在300℃下,PES-C的凝胶化剂量为6.0×10~4Gy。

Sn-Mo混合氧化物的缺陷结构及催化性能的研究

本文以1-丁烯在水蒸汽存在下选择性氧化制甲乙酮为典型反应,利用 XRD,ESR,IR,XPS,TEM 和 SEM 研究了 Sn-Mo 氧化物的结构与活性的关系.制备了8个样品,A,B,C,D,E,F,G 和 H 的 Mo/(Mo+Sn)分别为0,0.1,0.2,0.4,0.6,0.8,0.9,1.0.根据结构特征,可将 Sn-Mo 氧化物分为三组:第Ⅰ组 Mo/(Mo+Sn)≤0.2;第Ⅱ组0.2

RBa_2Cu_3O_(7-δ)的结构和某些性质的变化趋势

本文用X射线衍射、碘量法,扫描电镜等手段系统地研究了RBa_2Cu_3O_7-δ[R=La、Nd、Sm、Gd、Dy、Er、Yb、(DyYb)]化合物的结构和某些性质(如氧含量、Cu~(3+)/Cu~(2+)等)随稀土离子半径的变化规律。发现随着稀土离子半径的减少,晶胞参数(a、b、c、v)几乎线性降低,Cu~(3+)/Cu~(2+)(％)、氧含量(7-δ)、正交畸变(a-b)几乎线性增加,XRD图谱中001峰加强,SEM像中晶形更加完整。