Efeito da força iônica nas propriedades de fluidos de perfuração aquosos à base de polímeros carboxilados e sulfatados

In the well drilling operations problems caused by contamination of the drilling fluid are common. The dissolution of ions from the geological formations affects the rheological and filtration properties of the fluids. These ions shield the charges of ionic polymers, leading to its precipitation. In this work was performed a detailed study on the stability of the properties of aqueous solutions and aqueous drilling fluids in the presence of sulphated and carboxylated polymers, using carboxymethylcellulose and kappa-carrageenan as polymer compounds carboxylated and sulfated model, respectively. The effects of ionic strength of the aqueous medium containing Na+, Mg2+ and Ca2+ on rheological properties of the polymer and drilling fluids solutions were evaluated by varying the concentration of salts, pH and temperature. It was observed that the fluids with κ-carrageenan suffered less influence against the contamination by the ions at pH 9 to 10, even at higher concentrations, but higher influence on pH> 11. The fluids containing carboxymethylcellulose were more sensitive to contamination, with rapid reduction in viscosity and significant increase of the filtrate volume, while the fluid based polymer sulfated kappa-carrageenan showed evidence of interaction with cations and preserve the rheological properties and improved stability the volume of filtrate.

Efeito da força iônica nas propriedades de fluidos de perfuração aquosos à base de polímeros carboxilados e sulfatados

In the well drilling operations problems caused by contamination of the drilling fluid are common. The dissolution of ions from the geological formations affects the rheological and filtration properties of the fluids. These ions shield the charges of ionic polymers, leading to its precipitation. In this work was performed a detailed study on the stability of the properties of aqueous solutions and aqueous drilling fluids in the presence of sulphated and carboxylated polymers, using carboxymethylcellulose and kappa-carrageenan as polymer compounds carboxylated and sulfated model, respectively. The effects of ionic strength of the aqueous medium containing Na+, Mg2+ and Ca2+ on rheological properties of the polymer and drilling fluids solutions were evaluated by varying the concentration of salts, pH and temperature. It was observed that the fluids with κ-carrageenan suffered less influence against the contamination by the ions at pH 9 to 10, even at higher concentrations, but higher influence on pH> 11. The fluids containing carboxymethylcellulose were more sensitive to contamination, with rapid reduction in viscosity and significant increase of the filtrate volume, while the fluid based polymer sulfated kappa-carrageenan showed evidence of interaction with cations and preserve the rheological properties and improved stability the volume of filtrate.

Ordenamento de cargas e propriedades magnéticas de ortoferritas de lantânio dopadas com estrôncio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ordenamento de cargas e propriedades magnéticas de ortoferritas de lantânio dopadas com estrôncio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Estudo teórico das propriedades eletrônicas e termodinâmicas de nanofitas quasiperiódicas BCN

Nanoscale materials composed of boron, nitrogen, and carbon have unique properties and may be useful in new technologies. In this thesis, we investigate some properties of BCN nanoribbons constructed according to the Fibonacci quasiperiodic sequence. We analyze properties such as structural stability, electronic density of states, electronic specific heat, band structure, and energy band gap. We have performed first-principles calculations based on density functional theory implemented in the SIESTA code. The results showed that nanoribbons present a fixed value of the formation energy. The electronic density of states was used to calculate the specific heat. We found an oscillatory behavior of the electronic specific heat, in the low temperature regime. We analyze the electronic band structure to determine the energy band gap. The energy band gap oscillates as a function of the Fibonacci generation index n. Our work suggest that appropriate choice of the building block materials of the quasiperiodic sequence, may lead to a tuneable band gap of the quasiperiodic nanoribbons.

Investigação experimental das propriedades termofísicas e da convecção forçada de nanofluido de grafeno

This work presents an experimental investigation of thermal hydraulic performance of the nanofluid composed by graphene nanoparticles dispersed in a mixture of water and ethylene glycol at a ratio of 70:30% by volume. The tests were carried out under forced convection inside a circular tube with uniform heat flux on the wall for the laminar-turbulent transition regime. The mass flow rate ranged from 40 to 70 g/s corresponding to Reynolds numbers between 3000 and 7500. The heat flux was maintained constant at values of 11, 16 and 21 kW/m², as well as the inlet temperature of 15, 20 and 25°C. Three samples were produced with the nanofluid volumetric concentration of 0.05%, 0.10% and 0.15%. Thermophysical properties were experimentaly measured for all samples that were critically compared and discussed with theoretical models most commonly used in the literature. Initially, experiments with distilled water confirmed the validity of the experimental equipment for the thermo-hydraulic tests. Therefore, nanofluid samples that showed the highest thermal conductivity, corresponding to the volumetric concentrations of 0.15% and 0.10%, were subjected to the tests. The thermal-hydraulic performance for both samples was unsatisfactory. The heat transfer coefficients for convection of nanofluids reduced 21% in average, for the sample with = 0.15% and 26% and for =0.10%. The pressure drop of the samples was higher than the base fluid. Finally, the pressure drop and heat transfer coefficient by convection of both samples were also compared to theoretical models. The models used for pressure drop showed an excellent agreement with experimental results, which is remarkable considering the transitional flow.

Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilos

Dutra, R. P. S.; Varela,M. L.; Nascimento, R. M. ; Gomes, U. U. ; Martinelli1, A. E. ; Paskocimas, C. A. Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilosa. Cerâmica [online]. 2009, vol.55, n.333, pp. 100-105. ISSN 0366-6913. doi:Disponivem em: . Acesso em: 04 out. 2010.

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Estudo da composição e das propriedades bioactivas de plantas produtoras de bagas

O consumo de frutas e vegetais tem sido associado à prevenção de várias doenças crónicas, nomeadamente doenças cardiovasculares, diabetes, cancro e outras que envolvam processos inflamatórios. As bagas destacam-se pelo seu elevado conteúdo em polifenóis, cujas propriedades antioxidantes contribuem para a manutenção da saúde humana. O presente trabalho teve como alvo de estudo as diferentes partes morfológicas (bagas e folhas) de espécies produtoras de bagas, nomeadamente Elaeagnus umbellata, a Rubus grandofolius, a Sambucus lancolata, a Vaccinium padifolium e a Vaccinium cylindraceum, tendo em vista a sua valorização como produtos alimentares e/ou nutracêuticos. A caracterização físico-química destas espécies permitiu determinar que o teor total de sólidos solúveis (TSS) das bagas varia de 4,4 a 16,5 °Brix. As bagas demonstraram ser a parte morfológica com teor de humidade mais elevado. A análise do perfil fenólico por HPLC-DAD-ESI/MSn, no modo negativo, dos extractos metanólicos mostrou que as folhas apresentam maior conteúdo de compostos fenólicos, comparativamente às bagas. Os ácidos hidroxicinâmicos (derivados dos ácidos cafeicos, cumárico e ferúlico), os ácidos cafeoilquínicos, bem como os flavonóis-O-glicosilados (derivados da quercetina e canferol) predominam nestas espécies. A análise pelo modo positivo permitiu a identificação de antocianinas glicosiladas (delfinidina, cianidina, petunidina, peonidina e malvidina) nas bagas e folhas jovens da espécie Vaccinium padifolium. Os ensaios in vitro de simulação da digestão gastrointestinal permitiram compreender a sua influência na actividade antioxidante dos extractos. Após a digestão, as folhas continuam a apresentar maior capacidade antioxidante do que as bagas. Adicionalmente, concluiu-se que as enzimas presentes neste processo têm menor influência do que o pH e a força iónica dos sucos digestivos. O estudo do efeito inibitório in vitro dos extractos sobre a actividade de enzimas responsáveis pelo metabolismo dos hidratos de carbono permitiu determinar que os viii Joana Pinto (2016) extractos foram mais eficientes na inibição da actividade da α-glucosidase do que na inibição da actividade da α-amilase.

Caracterizacao fisica e estudo das propriedades eletricas magneticas e termicas do supercondutor de alto Tc policristalino Ysub1Basub2Cusub3Osub7-3

Dissertacao (Mestrado)

Estudo Preliminar das Propriedades Psicométricas do Inventário de Lateralidade de Edinburgh numa Amostra de Adultos da População Portuguesa

Introdução: A lateralidade é a diferença na capacidade de controlo entre os dois lados do corpo. Os métodos utilizados para avaliar a lateralidade manual incluem a observação efetiva do uso do membro dominante ou a aplicação de inventários respondidos pelo próprio indivíduo avaliado. O Inventário de Lateralidade de Edinburgh (EHI) é o instrumento mais utilizado para avaliar a lateralidade manual. Apesar do seu uso amplo, em Portugal não existem estudos que avaliem a sua validade e fidedignidade. Objetivos: Estudar as propriedades psicométricas do Inventário de Lateralidade de Edinburgh numa amostra da população portuguesa. Métodos: A amostra é constituída por 290 pessoas (135 homens e 155 mulheres), com idades compreendidas entre os 18 e os 65 anos. Todos os participantes preencheram uma declaração de consentimento informado e uma bateria de testes neuropsicológicos Resultados: A média no EHI foi de 62,36 (DP = 38,00). Os resultados demonstraram que das seis variáveis sociodemográficas (idade, sexo, escolaridade, zona de residência, regiões e profissão) três apresentaram ter influência significativa nas pontuações do EHI: idade, zona de residência e regiões. A confiabilidade e a estabilidade temporal do EHI apresentaram resultados adequados. A análise fatorial confirmatória mostrou que o modelo não é melhor explicado por um fator. Para dois fatores o modelo continua a não ser adequado. Conclusão: Apesar de termos obtido uma boa consistência interna não nos é possível considerar este teste como o mais adequado para medir o constructo da lateralidade. / Introduction: The handedness is the difference in the control capacity between the two sides of the body. The methods used to evaluate the manual handedness include the effective observation of the use of dominant member or application of inventories answered by the person assessed. The Edinburgh Handedness Inventory (EHI) is the most used to evaluate manual handedness. Even though being widely used, in Portugal there are no studies that measure its validity and reliability. Objective: To study the psychometric properties of Edinburgh Handedness Inventory in a Portuguese sample. Methods: The sample consists of 290 people (135 men and 155 women), aged between 18 and 65 years. All participants filled an informed consent form and a battery of neuropsychological tests. Results: The average in EHI was 62.36 (SD = 38.00). The results showed that 3 of 6 sociodemographic variables showed significant influence in EHI scores. The reliability and temporal stability of EHI were adequate. Confirmatory factor analysis showed that the model is not better explained by one factor. A two-factor model was not also suitable. Conclusion: Even though we got a good internal consistency we cannot consider this test as the most appropriate for measuring the handedness construct.

Propriedades Psicométricas da Bateria de Avaliação Frontal numa Amostra de Adultos da População Portuguesa

The Frontal Assessment Batery / A Bateria de Avaliação Frontal (FAB) é um teste neuropsicológico, constituído por seis subtestes, cujo objetivo é avaliar a disfunção executiva global, nomeadamente as funções relacionadas com o lobo frontal, tais como a concetualização, flexibilidade mental, programação motora, sensibilidade à interferência, controlo inibitório e autonomia ambiental frontal. De forma a contribuir para o avanço dos estudos normativos em Portugal, esta dissertação tem como objetivo avaliar as propriedades psicométricas da FAB, numa amostra de adultos da população portuguesa. O protocolo abrangeu a seguinte bateria de testes neuropsicológicos: Bateria de Avaliação Frontal, Figura Complexa de Rey, Matrizes Progressivas de Raven e Teste do Desenho do Relógio. A amostra deste estudo incluiu 376 indivíduos, 155 do sexo masculino e 221 do sexo feminino. Os resultados desta investigação sugerem que a pontuação da FAB é influenciada por algumas variáveis sociodemográficas, designadamente a idade, escolaridade, profissões e região. A análise correlacional mostrou que há apenas uma correlação positiva moderada entre a FAB e as Matrizes Progressivas de Raven. Apesar da consistência interna da FAB ser baixa, existe uma estabilidade temporal moderada. Ao finalizar, consideramos que a FAB reúne os requisitos para se apresentar como uma bateria útil e eficaz, demonstrando um grau razoável de estabilidade temporal, mas fraca consistência interna, sugerindo que a FAB não é indicada para amostra não clínica. / The Frontal Assessment Baterry (FAB) is a neuropsychological test, composed of six subtests, whose aim is to assess the overall executive dysfunction, namely functions related to the frontal lobe, such as conceptualization, mental flexibility, motor programming, sensitivity to interference, inhibitory control and environmental autonomy. In order to contribute to the advancement of normative studies in Portugal, this dissertation aim to evaluate the psychometric properties of the FAB, in an adult sample of the portuguese population. The protocol included the following battery of neuropsychological tests: Frontal Assessment Battery, Complex Figure of Rey, Raven's Progressive Matrices and Clock Drawing Test. The sample this study included 376 individuals, 155 male and 221 female. The results of this investigation suggest that FAB is influenced by some sociodemographic variables, namely age, education, profession and region. The correlational analysis showed that there is only a moderate positive correlation between the FAB and the Raven Progressive Matrices. However, also they found low positive correlations between the FAB and the Complex Figure of Rey, and Clock Drawing Test. Although the FAB has a low internal consistency, there is a moderate temporal stability. Finally, we consider that the FAB gathers the requirements to present itself as a useful and effective battery, demonstrating a reasonable degree of temporal stability, but weaker internal consistency, suggesting that the FAB is not indicate for non-clinical sample.