Fast pyrolysis and nitrogenolysis of biomass and biogenic residues:production of a sustainable slow release fertiliser

The production of agricultural and horticultural products requires the use of nitrogenous fertiliser that can cause pollution of surface and ground water and has a large carbon footprint as it is mainly produced from fossil fuels. The overall objective of this research project was to investigate fast pyrolysis and in-situ nitrogenolysis of biomass and biogenic residues as an alternative route to produce a sustainable solid slow release fertiliser mitigating the above stated problems. A variety of biomasses and biogenic residues were characterized by proximate analysis, ultimate analysis, thermogravimetric analysis (TGA) and Pyrolysis – Gas chromatography – Mass Spectroscopy (Py–GC–MS) for their potential use as feedstocks using beech wood as a reference material. Beech wood was virtually nitrogen free and therefore suitable as a reference material as added nitrogen can be identified as such while Dried Distillers Grains with Solubles (DDGS) and rape meal had a nitrogen content between 5.5wt.% and 6.1wt.% qualifying them as high nitrogen feedstocks. Fast pyrolysis and in-situ nitrogenolysis experiments were carried out in a continuously fed 1kg/h bubbling fluidized bed reactor at around 500°C quenching the pyrolysis vapours with isoparaffin. In-situ nitrogenolysis experiments were performed by adding ammonia gas to the fast pyrolysis reactor at nominal nitrogen addition rates between 5wt.%C and 20wt.%C based on the dry feedstock’s carbon content basis. Mass balances were established for the processing experiments. The fast pyrolysis and in-situ nitrogenolysis products were characterized by proximate analysis, ultimate analysis and GC– MS. High liquid yields and good mass balance closures of over 92% were obtained. The most suitable nitrogen addition rate for the in-situ nitrogenolysis experiments was determined to be 12wt.%C on dry feedstock carbon content basis. However, only a few nitrogen compounds that were formed during in-situ nitrogenolysis could be identified by GC–MS. A batch reactor process was developed to thermally solidify the fast pyrolysis and in-situ nitrogenolysis liquids of beech wood and Barley DDGS producing a brittle solid product. This was obtained at 150°C with an addition of 2.5wt% char (as catalyst) after a processing time of 1h. The batch reactor was also used for modifying and solidifying fast pyrolysis liquids derived from beech wood by adding urea or ammonium phosphate as post processing nitrogenolysis. The results showed that this type of combined approach was not suitable to produce a slow release fertiliser, because the solid product contained up to 65wt.% of highly water soluble nitrogen compounds that would be released instantly by rain. To complement the processing experiments a comparative study via Py–GC–MS with inert and reactive gas was performed with cellulose, hemicellulose, lignin and beech wood. This revealed that the presence of ammonia gas during analytical pyrolysis did not appear to have any direct impact on the decomposition products of the tested materials. The chromatograms obtained showed almost no differences between inert and ammonia gas experiments indicating that the reaction between ammonia and pyrolysis vapours does not occur instantly. A comparative study via Fourier Transformed Infrared Spectroscopy of solidified fast pyrolysis and in-situ nitrogenolysis products showed that there were some alterations in the spectra obtained. A shift in frequencies indicating C=O stretches typically related to the presence of carboxylic acids to C=O stretches related to amides was observed and no double or triple bonded nitrogen was detected. This indicates that organic acids reacted with ammonia and that no potentially harmful or non-biodegradable triple bonded nitrogen compounds were formed. The impact of solid slow release fertiliser (SRF) derived from pyrolysis and in-situ nitrogenolysis products from beech wood and Barley DDGS on microbial life in soils and plant growth was tested in cooperation with Rothamsted Research. The microbial incubation tests indicated that microbes can thrive on the SRFs produced, although some microbial species seem to have a reduced activity at very high concentrations of beech wood and Barley DDGS derived SRF. The plant tests (pot trials) showed that the application of SRF derived from beech wood and barley DDGS had no negative impact on germination or plant growth of rye grass. The fertilizing effect was proven by the dry matter yields in three harvests after 47 days, 89 days and 131 days. The findings of this research indicate that in general a slow release fertiliser can be produced from biomass and biogenic residues by in-situ nitrogenolysis. Nevertheless the findings also show that additional research is necessary to identify which compounds are formed during this process.

Differential effects of value consciousness and coupon proneness on consumers’ persuasion knowledge of pricing tactics

Pricing tactics persuasion knowledge (PTPK) is a relatively new concept that seeks to extend the research on persuasion knowledge to the pricing domain. Pricing tactics persuasion knowledge refers to the persuasion knowledge of consumers about marketers’ pricing tactics. Employing an acquisition–transaction utility theoretic perspective, this study examines the differential effects of value consciousness and coupon proneness on the accuracy, confidence, and calibration of consumers’ pricing tactics persuasion knowledge. The study finds that coupon proneness is negatively related to accuracy, confidence, and calibration of PTPK, while value consciousness is positively related to accuracy, confidence, and calibration of PTPK. The implications of the study are outlined.

Branded lives:the production and consumption of meaning at work

'Branded Lives explodes the myth that a brand must, or even can stand for one unified, easily communicated message. While warning of the dangers of managing to preserve this myth, the book also celebrates the plurality of brand meanings generated by those employed to serve both the brand and the customer. I recommend reading this book in its entirety. If you are like me, your reading will bring a refreshing fullness to the experience of brands and branding and many new insights.' - Mary Jo Hatch, University of Virginia, US. © Matthew J. Brannan, Elizabeth Parsons and Vincenza Priola 2011. All rights reserved.

Pyrolysis and gasification of biomass and acid hydrolysis residues

This research was carried for an EC supported project that aimed to produce ethyl levulinate as a diesel miscible biofuel from biomass by acid hydrolysis. The objective of this research was to explore thermal conversion technologies to recover further diesel miscible biofuels and/or other valuable products from the remaining solid acid hydrolysis residues (AHR). AHR consists of mainly lignin and humins and contains up to 80% of the original energy in the biomass. Fast pyrolysis and pyrolytic gasification of this low volatile content AHR was unsuccessful. However, successful air gasification of AHR gave a low heating value gas for use in engines for power or heat with the aim of producing all the utility requirements in any commercial implementation of the ethyl levulinate production process. In addition, successful fast pyrolysis of the original biomass gave organic liquid yields of up to 63.9 wt.% (dry feed basis) comparable to results achieved using a standard hardwood. The fast pyrolysis liquid can be used as a fuel or upgraded to biofuels. A novel molybdenum carbide catalyst was tested in fast pyrolysis to explore the potential for upgrading. Although there was no deoxygenation, some bio-oil properties were improved including viscosity, pH and homogeneity through decreasing sugars and increasing furanics and phenolics. AHR gasification was explored in a batch gasifier with a comparison with the original biomass. Refractory and low volatile content AHR gave relatively low gas yields (74.21 wt.%), low tar yields (5.27 wt.%) and high solid yields (20.52 wt.%). Air gasification gave gas heating values of around 5MJ/NM3, which is a typical value, but limitations of the equipment available restricted the extent of process and product analysis. In order to improve robustness of AHR powder for screw feeding into gasifiers, a new densification technique was developed based on mixing powder with bio-oil and curing the mixture at 150°C to polymerise the bio-oil.

Philosophy, theory, and practice of green operations management

This paper proposes a more profound discussion of the philosophical underpins of sustainability than currently exists in the MOT literature and considers their influence on the construction of the theories on green operations and technology management. Ultimately, it also debates the link between theory and practice on this subject area. The paper is derived from insights gained in three research projects completed during the past twelve years, primarily involving the first author. From 2000 to 2002, an investigation using scenario analysis, aimed at reducing atmospheric pollution in urban centres by substituting natural gas for petrol and diesel, provided the first set of insights about public policy, environmental impacts, investment analysis, and technological feasibility. The second research project, from 2003 to 2005, using a survey questionnaire, was aimed at improving environmental performance in livestock farming and explored the issues of green supply chain scope, environmental strategy and priorities. Finally, the third project, from 2006 to 2011, investigated environmental decisions in manufacturing organisations through case study research and examined the underlying sustainability drivers and decision-making processes. By integrating the findings and conclusions from these projects, the link between philosophy, theory, and practice of green operations and technology management is debated. The findings from all these studies show that the philosophical debate seems to have little influence on theory building so far. For instance, although ‘sustainable development’ emphasises ‘meeting the needs of current and future generation’, no theory links essentiality and environmental impacts. Likewise, there is a weak link between theory and the practical issues of green operations and technology management. For example, the well-known ‘life-cycle analysis’ has little application in many cases because the life cycle of products these days is dispersed within global production and consumption systems and there are different stakeholders for each life cycle stage. The results from this paper are relevant to public policy making and corporate environmental strategy and decision making. Most of the past and current studies in the subject of green operations and sustainability management deal with only a single sustainability dimension at any one time. Here the value and originality of this paper lies in its integration between philosophy, theory, and practice of green technology and operations management.

Age-related macular degeneration and modification of systemic complement factor H production through liver transplantation

Purpose: To investigate whether modification of liver complement factor H (CFH) production, by alteration of liver CFH Y402H genotype through liver transplantation (LT), influences the development of age-related macular degeneration (AMD). Design: Multicenter, cross-sectional study. Participants: We recruited 223 Western European patients ≥55 years old who had undergone LT ≥5 years previously. Methods: We determined AMD status using a standard grading system. Recipient CFH Y402H genotype was obtained from DNA extracted from recipient blood samples. Donor CFH Y402H genotype was inferred from recipient plasma CFH Y402H protein allotype, measured using enzyme-linked immunosorbent assays. This approach was verified by genotyping donor tissue from a subgroup of patients. Systemic complement activity was ascertained by measuring levels of plasma complement proteins using an enzyme-linked immunosorbent assay, including substrates (C3, C4), activation products (C3a, C4a, and terminal complement complex), and regulators (total CFH, C1 inhibitor). Main Outcome Measures: We evaluated AMD status and recipient and donor CFH Y402H genotype. Results: In LT patients, AMD was associated with recipient CFH Y402H genotype (P = 0.036; odds ratio [OR], 1.6; 95% confidence interval [CI], 1.0-2.4) but not with donor CFH Y402H genotype (P = 0.626), after controlling for age, sex, smoking status, and body mass index. Recipient plasma CFH Y402H protein allotype predicted donor CFH Y402H genotype with 100% accuracy (n = 49). Plasma complement protein or activation product levels were similar in LT patients with and without AMD. Compared with previously reported prevalence figures (Rotterdam Study), LT patients demonstrated a high prevalence of both AMD (64.6% vs 37.1%; OR, 3.09; P<0.001) and the CFH Y402H sequence variation (41.9% vs 36.2%; OR, 1.27; P = 0.014). Conclusions: Presence of AMD is not associated with modification of hepatic CFH production. In addition, AMD is not associated with systemic complement activity in LT patients. These findings suggest that local intraocular complement activity is of greater importance in AMD pathogenesis. The high AMD prevalence observed in LT patients may be associated with the increased frequency of the CFH Y402H sequence variation. © 2013 by the American Academy of Ophthalmology Published by Elsevier Inc.

Green operations initiatives in the automotive industry:an environmental reports analysis and benchmarking study

Purpose: The purpose of this paper is to focus on investigating and benchmarking green operations initiatives in the automotive industry documented in the environmental reports of selected companies. The investigation roadmaps the main environmental initiatives taken by the world's three major car manufacturers and benchmarks them against each other. The categorisation of green operations initiatives that is provided in the paper can also help companies in other sectors to evaluate their green practices. Design/methodology/approach: The first part of the paper is based on existing literature on the topic of green and sustainable operations and the "unsustainable" context of automotive production. The second part relates to the roadmap and benchmarking of green operations initiatives based on an analysis of secondary data from the automotive industry. Findings: The findings show that the world's three major car manufacturers are pursuing various environmental initiatives involving the following green operations practices: green buildings, eco-design, green supply chains, green manufacturing, reverse logistics and innovation. Research limitations/implications: The limitations of this paper start from its selection of the companies, which was made using production volume and country of origin as the principal criteria. There is ample evidence that other, smaller, companies are pursuing more sophisticated and original environmental initiatives. Also, there might be a gap between what companies say they do in their environmental reports and what they actually do. Practical implications: This paper helps practitioners in the automotive industry to benchmark themselves against the major volume manufacturers in three different continents. Practitioners from other industries will also find it valuable to discover how the automotive industry is pursuing environmental initiatives beyond manufacturing, apart from the green operations practices covering broadly all the activities of operations function. Originality/value: The originality of the paper is in its up-to-date analysis of environmental reports of automotive companies. The paper offers value for researchers and practitioners due to its contribution to the green operations literature. For instance, the inclusion of green buildings as part of green operations practices has so far been neglected by most researchers and authors in the field of green and sustainable operations. © Emerald Group Publishing Limited.

Risks and benefits of selective (re)presentation of interviewees' talk:some insights from discourse analysis

Purpose: The purpose of this paper is to examine the quality of evidence collected during interview. Current UK national guidance on the interviewing of victims and witnesses recommends a phased approach, allowing the interviewee to deliver their free report before any questioning takes place, and stipulating that during this free report the interviewee should not be interrupted. Interviewers, therefore, often find it necessary during questioning to reactivate parts of the interviewee's free report for further elaboration. Design/methodology/approach: The first section of this paper draws on a collection of police interviews with women reporting rape, and discusses one method by which this is achieved - the indirect quotation of the interviewee by the interviewer - exploring the potential implications for the quality of evidence collected during this type of interview. The second section of the paper draws on the same data set and concerns itself with a particular method by which information provided by an interviewee has its meaning "fixed" by the interviewer. Findings: It is found that "formulating" is a recurrent practice arising from the need to clarify elements of the account for the benefit of what is termed the "overhearing audience" - in this context, the police scribe, CPS, and potentially the Court. Since the means by which this "fixing" is achieved necessarily involves the foregrounding of elements of the account deemed to be particularly salient at the expense of other elements which may be entirely deleted, formulations are rarely entirely neutral. Their production, therefore, has the potential to exert undue interviewer influence over the negotiated "final version" of interviewees' accounts. Originality/value: The paper highlights the fact that accurate re-presentations of interviewees' accounts are a crucial tool in ensuring smooth progression of interviews and that re-stated speech and formulation often have implications for the quality of evidence collected during significant witness interviews. © Emerald Group Publishing Limited.

Design and implementation of production systems for high variety electronics assembly

Information technology companies are having to broaden their overall strategic view in deference to the premise that it is better to be market-driven than technology-led. Cost and technical performance are no longer the only considerations, as quality and service now demand equal recognition. The production of a high volume single item has given way to that of low volume multiple items, which in turn requires some modification of production systems and brings flexible manufacturing, Just-in-Time production and total quality control into sharper focus for the achievement of corporate objectives.

Perceptions of learning and teaching quality in Higher Education:developing a culture of co-creation of value

Perceptions about the quality of learning and teaching in Higher Education has for many years focused upon the application of market based principles. This includes the notion of students as “customers” of the Higher Education Institutions (HEI) service. We argue that the application of the customer analogy is unhelpful however, as students this approach is likely to affect student expectations about the service and their judgements about its quality. The purpose of this paper is to propose a study consisting of a series of interventions to develop a culture of value co-creation at a UK based HEI. By introducing CCV principles, it is hoped to steer students away from seeing themselves as “customers”, and passive recipients of in the learning and teaching process, to one where they take responsibility for their own learning experience, to be explored and acted upon in partnership with their lecturers and other stakeholders.