Governing calculative practices: An investigation of development viability modelling in the English planning system

Over the last decade the English planning system has placed greater emphasis on the financial viability of development. ‘Calculative’ practices have been used to quantify and capture land value uplifts. Development viability appraisal (DVA) has become a key part of the evidence base used in planning decision-making and informs both ‘site-specific’ negotiations about the level of land value capture for individual schemes and ‘area-wide’ planning policy formation. This paper investigates how implementation of DVA is governed in planning policy formation. It is argued that the increased use of DVA raises important questions about how planning decisions are made and operationalised, not least because DVA is often poorly understood by some key stakeholders. The paper uses the concept of governance to thematically analyse semi-structured interviews conducted with the producers of DVAs and considers key procedural issues including (in)consistencies in appraisal practices, levels of stakeholder consultation and the potential for client and producer bias. Whilst stakeholder consultation is shown to be integral to the appraisal process in order to improve the quality of the appraisals and to legitimise the outputs, participation is restricted to industry experts and excludes some interest groups, including local communities. It is concluded that, largely because of its recent adoption and knowledge asymmetries between local planning authorities and appraisers, DVA is a weakly governed process characterised by emerging and contested guidance and is therefore ‘up for grabs’.

The co-development of technology and new buildings: incorporating building integrated photovoltaics

Current approaches for the reduction of carbon emissions in buildings are often predicated on the integration of renewable technologies into building projects. Building integrated photovoltaics (BIPV) is one of these technologies and brings its own set of challenges and problems with a resulting mutual articulation of this technology and the building. A Social Construction of Technology (SCOT) approach explores how negotiations between informal groups of project actors with shared interests shape the ongoing specification of both BIPV and the building. Six main groups with different interests were found to be involved in the introduction of BIPV (Cost Watchers, Design Aesthetes, Green Guardians, Design Optimizers, Generation Maximizers and Users). Their involvement around three sets of issues (design changes from lack of familiarity with the technology, misunderstandings from unfamiliar interdependencies of trades and the effects of standard firm procedure) is followed. Findings underline how BIPV requires a level of integration that typically spans different work packages and how standard contractual structures inhibit the smooth incorporation of BIPV. Successful implementation is marked by ongoing (re-)design of both the building and the technology as informal fluid groups of project actors with shared interests address the succession of problems which arise in the process of implementation.

IFRS for SMEs: the IASB’S due process

This study explores the role of the International Accounting Standards Board’s (IASB) due process in developing its International Financial Reporting Standards for Small and Medium-sized Entities (IFRS or SMEs)standard. There were tensions between the IASB’s desire to minimise divergence from full IFRS and preserve recognition and measurement principles, and the primary reasons for undertaking the project – to meet the needs of users of financial statements of SMEs and to reduce the financial reporting burden on SMEs. Examination of events during the development of the project reveals much that was not apparent from material in the public domain. Most significantly, the IASB recognised that the final title of the standard, IFRS for SMEs, does not necessarily describe the scope of the standard. This paper also shows that the due process followed in the case of the IFRS for SMEs project barely reflected the ‘will of people’ but was more inclined towards acting as a communicative function for the IASB without any commitment to change its stance on the SME standard.

Bank regulation and the process of internationalisation: a study of Japanese bank entry into London

The paper provides a theoretical insight into bank regulation and the process of internationalisation by examining the concepts of regulatory push and market pull within the context of Japanese bank entry into London during the 1980s. Rugman and Verbeke's [(1998). Corporate strategy and international environmental policy. Journal of International Business Studies, 29(4), 819–833] Consistency of Home and Host Government Goals model is utilised to structure the discussion, which centres on a situation where there is a conflict of goals between multinational enterprises (MNEs) and the home government but goal alignment between MNEs and the host government. As such the paper examines a relatively under-researched aspect of internationalisation and concludes that in certain circumstances internationalisation can occur despite great ‘psychic distance’. The paper also argues that although bank regulation can lead to a conflict situation it can also be conducive to the development of a strong home base and the development of firm specific advantages.

Reverse transfers of innovation and national development: evidence from Brazilian subsidiaries

The search for innovation has become an important motivation for the internationalization of companies in emerging countries. In that context, this study tests the impact that a nation’s development has on whether subsidiaries transfer innovation of products or that of processes. Survey data collected from 73 subsidiaries of Brazilian companies indicate that companies located in developed markets tend to transfer more product-oriented innovations than do those based in emerging countries. Furthermore, the size and age of a subsidiary has an impact on the transfer process. The larger and younger the subsidiary, the more likely a company is to favor the flow of product innovation into its headquarters. The level of national development was not identified as an influence on the flow of process innovation.

Participatory Development

Participatory development is a process of taking into account peoples’ agency in development by involving people in decision-making over planning processes that affect their lives. This permits people to achieve basic human needs but also to exercise their ability to challenge the established values and institutions that reproduce the monolithic enterprise of capitalism. Against de-territorialised and universal solutions put forward by development experts, participation raises the central issue of reflexivity, while suggesting how different forms of knowledge, power and agency relate to one another in actors’ diverse spheres of life to achieve degrees of social and environmental justice; this configures the notion of participation in processes of development.

The Masters in Teaching and Learning (MTL): a retrospective, intrinsic case study of the process of policy into practice and its impact on teacher participants

The research reported here is a retrospective case study of the recent (2010) introduction of the Masters in Teaching and Learning (MTL) as a post-graduate level programme of professional development for teachers. It contributes to the debate and research over the past two decades about the impact of post-graduate professional development and appropriate ways of delivering it. The study is located within an extensive body of literature dealing with the importance of the teaching profession with regard to the success of schools and pupils and the impact of professional development on teaching quality and of teaching quality on attainment. A further relevant context is the ongoing tension between the teaching profession and academics on the one hand and government and political actors on the other, in respect of the approaches to professional development and to the control of educational processes. The research questions which inform the study deal with the perspectives of various participants – policy makers, programme directors, coaches and teachers studying for the MTL – on the extent to which the MTL is likely to have an ameliorative effect on teaching and pupil attainment, their experiences of the process of policy development and their experiences as course participants. The study adopts a case study approach which involves elite interviews with those responsible for the development and implementation of the MTL, questionnaires completed by MTL course participants and a comparison group taking a conventional MA and in depth interviews with participants and coaches. The results revealed tensions and difficulties associated with the development of the MTL including uneasy relationships between HE institutions and government agencies, ideas about ‘producer capture’, the relevance of the MBA model and concern over the role of coaches. However, while acknowledging various difficulties and some misconceived expectations they viewed its potential to meet its expressed aims positively, given time. Course participants were positive about their experience of the MTL and felt that it had contributed to many aspects of their professional development. Most saw it as a positive experience despite the variable quality of support from their schools, particularly in the form of the school-based coach the concept of which had been heralded as the bellwether of the MTL. It was striking that the responses of the MTL participants were very similar to those of teachers taking a conventional MA. A finding which would repay further investigation is that while the great majority of course participants felt that the MTL (and the MA) had contributed to their becoming more effective teachers they were much less confident that it had contributed to increased pupil attainment.

Histological Outcomes on the Development of New Space-making Devices for Maxillary Sinus Floor Augmentation

Background: Previous studies have pointed out that the mere elevation of the maxillary sinus membrane promotes bone formation without the use of augmentation materials. Purpose: This experimental study aimed at evaluating if the two-stage procedure for sinus floor augmentation could benefit from the use of a space-making device in order to increase the bone volume to enable later implant installation with good primary stability. Materials and Methods: Six male tufted capuchin primates (Cebus apella) were subjected to extraction of the three premolars and the first molar on both sides of the maxilla to create an edentulous area. The sinuses were opened using the lateral bone-wall window technique, and the membrane was elevated. One resorbable space-making device was inserted in each maxillary sinus, and the bone window was returned in place. The animals were euthanatized after 6 months, and biopsy blocks containing the whole maxillary sinus and surrounding soft tissues were prepared for ground sections. Results: The histological examination of the specimens showed bone formation in contact with both the schneiderian membrane and the device in most cases even when the device was displaced. The process of bone formation indicates that this technique is potentially useful for two-stage sinus floor augmentation. The lack of stabilization of the device within the sinus demands further improvement of space-makers for predictable bone augmentation. Conclusions: It is concluded that (1) the device used in this study did not trigger any important inflammatory reaction; (2) when the sinus membrane was elevated, bone formation was a constant finding; and (3) an ideal space-making device should be stable and elevate the membrane to ensure a maintained connection between the membrane and the secluded space.

Development of edible films based on differently processed Atlantic halibut (Hippoglossus hippoglossus) skin gelatin

The gelatin prepared from the skins of the Atlantic halibut (Hippoglossus hippoglossus) was investigated for the development of edible films plasticized with 30g sorbitol/100g gelatin. Two types of dry gelatin preparations were obtained depending on whether an intermediate evaporation step at 60 degrees C in the drying procedure is included or not. The amino acid composition, molecular weight distribution (determined by SDS-polyacrylamide gel electrophoresis) and glass transition temperature (determined by differential scanning calorimetry) of the gelatins were determined and related to some physical properties of the resulting films. The gelatin extracted from the halibut skins showed a suitable filmogenic capacity, leading to transparent, weakly colored, water-soluble and highly extensible films. The intermediate evaporation step at 60 degrees C induced thermal protein degradation, causing the resulting films to be significantly less resistant and more extensible. No differences in water vapor permeability, viscoelasticity, glass transition or color properties were evidenced between the two gelatins tested. (C) 2007 Elsevier Ltd. All rights reserved.

Axillary bud development in pineapple nodal segments correlates with changes on cell cycle gene expression, hormone level, and sucrose and glutamate contents

During the process of lateral organ development after plant decapitation, cell division and differentiation occur in a balanced manner initiated by specific signaling, which triggers the reentrance into the cell cycle. Here, we investigated short-term variations in the content of some endogenous signals, such as auxin, cytokinins (Cks), and other mitogenic stimuli (sucrose and glutamate), which are likely correlated with the cell cycle reactivation in the axillary bud primordium of pineapple nodal segments. Transcript levels of cell cycle-associated genes, CycD2;1, and histone H2A were analyzed. Nodal segments containing the quiescent axillary meristem cells were cultivated in vitro during 24 h after the apex removal and de-rooting. From the moment of stem apex and root removal, decapitated nodal segment (DNS) explants showed a lower indol-3-acetic acid (IAA) concentration than control explants, and soon after, an increase of endogenous sucrose and iP-type Cks were detected. The decrease of IAA may be the primary signal for cell cycle control early in G1 phase, leading to the upregulation of CycD2;1 gene in the first h. Later, the iP-type Cks and sucrose could have triggered the progression to S-phase since there was an increase in H2A expression at the eighth h. DNS explants revealed substantial increase in Z-type Cks and glutamate from the 12th h, suggesting that these mitogens could also operate in promoting pineapple cell cycle progression. We emphasize that the use of non-synchronized tissue rather than synchronous cell suspension culture makes it more difficult to interpret the results of a dynamic cell division process. However, pineapple nodal segments cultivated in vitro may serve as an interesting model to shed light on apical dominance release and the reentrance of quiescent axillary meristem cells into the cell cycle.

Embryonic Development of Ampheres leucopheus and lporangaia pustulosa (Arachnida: Opiliones: Gonyleptidae)

The first studies concerning the embryonic development of harvestmen started in the late 19th century, and focused mostly on holarctic species, and only three species of the suborder Laniatores (the largest, among the four suborders considered presently) were studied. Moreover, the last studies on embryology of harvestmen were made during the late 1970s. This study focused on the embryonic development of Ampheres leucopheus (Gonyleptidae, Caelopyginae) and Iporangaia pustulosa (Gonyleptidae, Progonyleptoidellinae). The embryonic development was followed in the field, by taking daily photographs of different eggs during about 2 months. When laid, eggs of A. leucopheus and I pustulosa have approximately 1.13 and 1.30 mm in diameter, respectively, and the second is embedded in a large amount of mucus. The eggs grow, mainly due to water absorption at the beginning of the process, and they reach a diameter of about 1.35 and 1.59 mm, respectively, close to hatching. It took, respectively, 29-56 days and 35-66 days from egg laying to hatching. For the description of the embryonic development, we use photographs from the field, SEM micrographs, and histological analysis. This allowed us, for instance, to document the progression of structures and pigmentation directly from live embryos in the field, and to record microstructures, such as the presence of perforations in the cuticle of the embryo in the place where eyes are developing. Yet, contrary to what was expected in the literature, we record an egg tooth in one of the studied laniatoreans. J. Exp. Zool. (Mol. Dev. Evol) 314B:489-502, 2010. (C) 2010 Wiley-Liss, Inc.

The link between partial melting, granitization and granulite development in central Ribeira Fold Belt, SE Brazil: New evidence from elemental and Sr-Nd isotopic geochemistry

Elemental and Sr-Nd isotopic data on metatexites, diatexites, orthogneisses and charnockites from the central Ribeira Fold Belt indicate that they are LILE-enriched weakly peraluminous granodiorites. Harker and Th-Hf-La correlation trends suggest that these rocks represent a co-genetic sequence, whereas variations on CaO, MnO, Y and HREE for charnockites can be explained by garnet consumption during granulitic metamorphism. Similar REE patterns and isotopic results of epsilon(565)(Nd) = -5.4 to -7.3 and (87)Sr/(86)Sr(565) = 0.706-0.711 for metatexites, diatexites, orthogneisses and charnockites, as well as similar T(DM) ages between 2.0 and 1.5 Ga are consistent with evolution from a relatively homogeneous and enriched common crustal (metasedimentary) protolith. Results suggest a genetic link between metatexites, diatexites, orthogneisses and charnockites and a two-step process for charnockite development: (a) generation of the hydrated igneous protoliths by anatexis of metasedimentary rocks; (b) continuous high-grade metamorphism that transformed the ""S-type granitoids"" (leucosomes and diatexites) into orthogneisses and, as metamorphism and dehydration progressed, into charnockites. (C) 2011 Elsevier Ltd. All rights reserved.

Unraveling an antique subduction process from metamorphic basement around Medellin city, Central Cordillera of Colombian Andes

In the surroundings of Caldas and El Retiro cities (Colombia) metamorphic rocks derived from basic and pelitic protoliths comprise the Caldas amphibole schist and the Ancon schist respectively. Subordinated metamorphosed granite bodies (La Miel gneiss) are associated to these units, and The El Retiro amphibolites, migmatites and granulites crops out eastwards of these units, separated by shear zones. The Caldas amphibole schist and the Ancon schist protoliths could have been formed in a distal marine reduced environment and amalgamated to the South American continent in an apparent Triassic subduction event. The El Retiro rocks are akin to a continental basement and possible include impure metasediments of continental margin, whose metamorphism originated granulite facies rocks and migmatites as a result of the anatexis of quartz-feldspathic rocks. The metamorphism was accompanied by intense deformation, which has juxtaposed both migmatites and granulite blocks. Afterward, heat and fluid circulation associated with the emplacement of minor igneous intrusions resulted in intense fluid-rock interaction, variations in the grain size of the minerals and, especially, intense retrograde metamorphic re-equilibrium. Thermobarometric estimations for the Caldas amphibole schist indicate metamorphism in the Barrovian amphibolite fades. The metamorphic path is counter-clockwise, but retrograde evolution could not be precisely defined. The pressures of the metamorphism in these rocks range from 6.3 to 13.5 kbar, with narrow temperature ranging from 550 to 630 degrees C. For the Ancon schist metapelites the P-T path is also counter-clockwise, with a temperature increase evidenced by the occurrence of sillimanite and the cooling by later kyanite. The progressive metamorphism event occurred at pressures of 7.6-7.2 kbar and temperatures of 645-635 degrees C for one sample and temperature between 500 and 600 degrees C under constant pressure of 6 kbar. The temperature estimated for these rocks varies between 400 and 555 degrees C at pressures of 5-6 kbar in the retrograde metamorphic path. The El Retiro rocks evidence strong decompression with narrow variation in temperature, showing pressure values between 8.7 and 2.7 kbar at temperatures of 740-633 degrees C. These metamorphic fragments of the basement in the Central Cordillera of the Colombian Andes could represent a close relationship with an antique subduction zone. (C) 2011 Elsevier Ltd. All rights reserved.

Prion Protein and Its Ligand Stress Inducible Protein 1 Regulate Astrocyte Development

Prion protein (PrP(C)) interaction with stress inducible protein 1 (STI1) mediates neuronal survival and differentiation. However, the function of PrP(C) in astrocytes has not been approached. In this study, we show that STI1 prevents cell death in wild-type astrocytes in a protein kinase A-dependent manner, whereas PrP(C)-null astrocytes were not affected by STI1 treatment. At embryonic day 17, cultured astrocytes and brain extracts derived from PrP(C)-null mice showed a reduced expression of glial fibrillary acidic protein (GFAP) and increased vimentin and nestin expression when compared with wild-type, suggesting a slower rate of astrocyte maturation in PrP(C)-null animals. Furthermore, PrP(C)-null astrocytes treated with STI1 did not differentiate from a flat to a process-bearing morphology, as did wild-type astrocytes. Remarkably, STI1 inhibited proliferation of both wild-type and PrP(C)-null astrocytes in a protein kinase C-dependent manner. Taken together, our data show that PrP(C) and STI1 are essential to astrocyte development and act through distinct signaling pathways.(C) 2009 Wiley-Liss, Inc.

Development of an Analytical Methodology for Quantification of Strong Acid in Diesel Oil

Many factors can affect the quality of diesel oil, in particular the degradation processes that are directly related to some organosulfur compounds. During the degradation process, these compounds are oxidized into their corresponding sulfonic acids, generating a strong acid content during the process. p-Toluene sulfonic acid analysis was performed using the linear sweep voltammetry technique with a platinum ultramicroelectrode in aqueous solution containing 3 mol L(-1) potassium chloride. An extraction step was introduced prior to the voltammetric detection in order to avoid the adsorption of organic molecules, which inhibit the electrochemical response. The extraction step promoted the transference of sulfonic acid from the diesel oil to an aqueous phase. The method was accurate and reproducible, with detection and quantification limits of 5 ppm and 15 ppm, respectively. Recovery of sulfonic acid was around 90%.