Estabilidade sagital da condiloplastia associada à cirurgia ortognática para o tratamento do osteocondroma mandibular

The aim of this study was to evaluate the stability of the conservative condylectomy technique and articular disc repositioning as the surgical treatment approach for management of mandibular condylar osteochondroma, with appropriate Orthognathic surgery. Fifteen patients (12 females and 3 males), average age of 32.3 years (range, 13 to 56 years), with unilateral active osteochondroma of the mandibular condyle were analyzed. All patients underwent conservative condylectomy, recontouring of the remaining condylar neck stump and articular disc repositioned and indicated orthognatic surgical procedures. Average post surgical follow-up was 19 months. Each patient's lateral cephalograms were traced at 3 intervals (presurgery, immediate post surgery and long-term follow-up). Immediate after surgery the oclusal plane angle decreased -2.8 ± 4.5o, the maxillomandibular complex rotated counter-clockwise with advancement at menton 5.3 ± 5.6 mm, pogonion 5.0 ± 5.1 mm, B point 3.4 ± 4.2 mm and A point 1.0 ± 1.5 mm. The long-term follow-up showed significant changes in overbite (-0.6 ± 0.5 mm) and SNGoMe (0,93° ± 1,53°). Horizontally and vertically small instabilities occurred in Me (-1.21 ± 1.94 mm) and PNS (-1.48 ± 1.67 mm) respectively. The treatment protocol studied produced counterclockwise rotation and maxillofacial mandibular advancement. The long-term follow-up showed solid dental and skeletal stability with horizontal instability of Me and PNS in the vertical direction.

Tratamento da sindrome da apnéia e hipopnéia obstrutiva do sono (sahos) com aparelhos intrabucais

The apnea and hypopnea sleep obstructive syndrome is a disorder that affects part of adult population. Some characteristics can come with this syndrome that cause social problems such as snoring and excessive daytime sleepiness, associated many times with pulmonary hypertension and cardiac insufficiency. The dentist who is inserted into a multidisciplinary team is a professional highly regarded for diagnosis and treatment of sleep disorders. Among treatments recommended, therapy with intraoral appliance shows an excellent non invasive alternative, achieving satisfactory results.

Efeito antimicrobiano e citotóxico do óleo essencial de Cymbopogon citratus sobre células odontoblastóides

The aim of this study was to evaluate the antimicrobial and cytotoxic effect of essential oil (EO) of lemon grass (Cymbopogon citratus). From the agar diffusion method, different concentrations of EO (0.135%, 0.2% and 1%), and control solutions (chlorhexidine (Chx), distilled water (Ad) and cereal alcohol (Ac)) were applied on cultures of Candida albicans (C.a), Streptococcus mutans (S.m), Streptococcus sobrinus (S.sob) and Lactobacillus acidophilus (L.a). For C.a, S.m and S.sob, the largest inhibition zones in descending order were: Chx, Ac and EO 1%, while the latter two were statistically similar (Mann-Whitney, p> 0.05). For L.a, the largest inhibition halo was observed for the Chx, followed by EO at 1%, 0.2%, 0.135% and Ac. For evaluation of cytotoxicity, the following groups were set: G1: 0,1% EO; G2: pure EO; G3 (positive control): H2 O2 ; G4: cereal alcohol; and G5 (negative control): culture medium – DMEM. The solutions were applied on the cultured MDPC-23 cells, which were plated (30,000 cells/cm2 ) in wells of 24 well-dishes. Cell metabolism was evaluated by MTT assay. Considering G5 (negative control) as 100% of cell metabolism, it was observed for G1, G2, G3 and G4 a percentage reduction in cell metabolism of 29.6%, 82%, 81.2% and 33.4%, respectively. It was concluded that the low concentration of 0,1% OE (C. citratus) was able to inhibit the growth of the strains tested as well as caused mild cytotoxicity to the cultured MDPC-23 cells.

Associação da raspagem com antibioticoterapia em um caso de periodontite agressiva generalizada

The treatment of aggressive periodontitis is a challenge to the clinician, therefore the search for effective treatment protocols of this disease is important. The aim of this case report was demonstrate the effectiveness of the combination of systemic antibiotics with non-surgical periodontal therapy in the treatment of generalized aggressive periodontitis. a 27-year-old patient (RCS), smoker for 11 years (10 cigarettes/day on average), with no systemic alteration, attended the periodontal clinic with a complaint abnormal dental position. After the clinical examination, the diagnosis of generalized aggressive periodontitis was defined. The non-surgical periodontal treatment was executed associated with administration of amoxicillin plus metronidazole for ten days. Clinical parameters (Clinical Attachment level, marginal gingival level, periodontal probing depth, bleeding on probing, plaque index and gingival index) and radiographic parameters (distance between the cemento-enamel junction and the bone crest) were evaluated before and after non-surgical periodontal treatment, after antibiotic therapy and three, six and 12 months after the treatment. After one year follow-up, the results showed improvement in clinical and radiographic parameters with stabilized and decreased tooth mobility and absence of tooth loss. It was concluded that the association of non-surgical periodontal therapy with the administration of amoxicillin/metronidazole was effective in the treatment of generalized aggressive periodontitis.

Efeito do ângulo de trabalho do ultrassom e do jato de bicarbonato sobre as superfícies ranculares

The aim of this study was to evaluate the effect of the working angle variation of the magnetoestritive ultrasonic (MU) and air polishing devices (APD) on the roughness and wear of dental root. Fifty bovine incisive teeth were used in this study. The proximal surfaces of the teeth were divided in three regions: coronal, median, and an apical. The coronal region was treated with a manual scaler, the apical region was treated with APD or with a MU and the medium region was maintained untreated to serve as a control. The teeth were divided in 11 groups according to the treatment applied: MU-0º; MU-30º; MU-45º; MU-60º; MU-90º; AP-0º; AP-30º; AP-45º; AP-60º; AP-90º; MS: manual scaler. To the statistical analysis, data submitted to the Anova and Tukey's test (p < 0.05). The manual curette promotes less roughness and higher tooth wear in comparison with the both ultrasonic and air polishing devices (p < 0.05). The angles of 45º, 60º and 90º caused higher rate of tooth wear and roughness when the MU was used (p < 0.05), while the angle of 90° caused a higher tooth wear than the angle of 30° when the APD was used (p < 0.05). The working angle variation influenced the tooth wear and roughness promoted by MU, whereas when using APD, the working angle variation influenced only the tooth wear.

Próteses parciais removíveis associadas a encaixes: implicações clínicas e laboratoriais

Nowadays, the fixed partial dentures and/or dental implants is the most requested treatmentby the majority of partially edentulous patients. However, depending on the periodontal condition of the remaining teeth, as well as the bone condition of the prosthetic space, the oral rehabilitation with these treatments may be limited or even contraindicated. In such cases, the use of removable partial dentures associated to attachments becomes an important alternative for aesthetic and functional rehabilitation. Attachments are mechanical devices consisted of two parts (patrix-matrix), one placed inside another, which act as direct retainer, providing retention, support and stability to the dentures. These devices can be classified as intra or extracoronal attachments, considering their position in relation to the abutment tooth. However, regardless the type of attachment, the association between fixed and removable partial dentures should be performed respecting the biomechanical principles of both. Therefore, the purpose of this study was to review and discuss the literature about the clinical and laboratory implications of the association between fixed and removable partial dentures by means of attachments.

Prótese metalocerâmica associada à prótese metaloplástica implantossuportada em paciente desdentado total

The use of different methods and materials should be considered during the planning of implant-supported prostheses. Complications such as fractures of the acrylic resin base, wear and fracture of teeth can occur frequently, creating the need for careful planning for each patient, which can make the selection of the type of treatment more complex. Thus, this article describes the oral rehabilitation of a completely edentulous patient with bimaxillary fixed implant-supported prosthesis, with complaints on aesthetics, loss of vertical dimension and fracture of acrylic resin teeth of the upper arch. After the restoration of vertical dimension, his dentures were replaced with new bimaxillary implant-supported fixed prostheses, ceramic and acrylic resin were used as veneering material for maxilla and mandible, respectively. At the end of the treatment, the patient received bimaxillary flat occlusal splints to protect the teeth and implants of possible parafunctional habits. The approach for the treatment allowed a quick and effective resolution, with aesthetic and functional outcomes very favorable for the patient.

Air abrasion before and/or after zirconia sintering: surface characterization, flexural strength, and resin cement bond strength

The purpose of this in vitro study was to evaluate the effect of air-abrasion/zirconia sintering order on the yttria partially stabilized tetragonal zirconia polycrystal (Y-TZP) surface characterization (roughness, morphology, and phase transformation), flexural strength (FS), and shear bond strength (SBS) to a resin cement. Y-TZP specimens were air abraded with 50-μm Al2O3 particles after (AS), before (BS), or before and after zirconia sintering (BAS). For roughness (Ra), 30 block specimens (12×12×3.0 mm; n=10) had their surfaces analyzed by a profilometer. Next, on the air-abraded surfaces of these specimens, composite resin discs (n=30) were bonded with RelyX ARC. The bonded specimens were stored for 24 hours in distilled water at 37°C before shear testing. Failure mode was determined with a stereomicroscope (20×). The surface morphology (n=2) was evaluated by SEM (500×). For the four-point flexural strength test (EMIC DL2000), 39 bar-shaped specimens (20×4.0×1.2 mm; n=13) were air abraded according to the three conditions proposed, and an additional group (nonabraded) was evaluated (n=13). The quantitative analysis of phase transformation (n=1) was completed with Rietveld refinement with X-ray diffraction data. Ra (μm) and SBS (MPa) data were analyzed by one-way analysis of variance (ANOVA) and the Tukey test (α=0.05). Pearson correlation analysis was used to determine if there was a correlation between roughness and SBS. For FS (MPa) data, one-way ANOVA and the Dunnett C-test (α=0.05) were used. The air-abrasion/zirconia sintering order influenced significantly (p<0.001) Ra, SBS, and FS. The BS and AS groups presented the highest (1.3 μm) and the lowest (0.7 μm) Ra. The highest SBS (7.0 MPa) was exhibited by the BAS group, followed by the AS group (5.4 MPa) and finally by the BS group (2.6 MPa). All groups presented 100% adhesive failure. A weak correlation (r=−0.45, p<0.05) was found between roughness and SBS. The air-abrasion/zirconia sintering order provided differences in the surface morphology. The nonabraded (926.8 MPa) and BS (816.3 MPa) groups exhibited statistically similar FS values but lower values than the AS (1249.1 MPa) and BAS (1181.4 MPa) groups, with no significant difference between them. The nonabraded, AS, BS, and BAS groups exhibited, respectively, percentages of monoclinic phase of 0.0 wt%, 12.2 wt%, 0.0 wt%, and 8.6 wt%. The rougher surface provided by the air-abrasion before zirconia sintering may have impaired the bonding with the resin cement. The morphological patterns were consistent with the surface roughness. Considering the short-term SBS and FS, the BAS group exhibited the best performance. Air abrasion, regardless of its performance order, provides tetragonal to monoclinic transformation, while sintering tends to zero the monoclinic phase content.

Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic

Statement of problem Because zirconia is a glass-free material, alternative surface treatments such as airborne-particle abrasion or silica coating should be used for long-term bonding. However, these surface treatments in combination with different bonding agents and luting cements have not yet been studied. Purpose The purpose of the study was to evaluate the effect of surface treatments on the shear bond strength (SBS) of luting cements to Y-TZP ceramic. Material and methods Zirconia disks (N=240) were airborne-particle abraded with the following particles (n=48): 50 μm Al2O3; 120 μm Al2O3; 30 μm silica-coated Al2O3 (Rocatec Soft); 120 μm Al2O3+110 μm silica-coated Al2O3 (Rocatec Plus); and Rocatec Plus. After silanization of the zirconia surface, composite resin disks were bonded with (n=12) RelyX Luting 2; RelyX ARC; RelyX U100; and Panavia F. The bonded specimens were thermocycled (10 000 cycles) and tested for SBS. Failure mode was determined with a stereomicroscope (×20). The morphology and elemental composition of airborne-particle abraded surfaces were evaluated with scanning electron microscopy (×500) and energy-dispersive x-ray spectroscopy (×50). Results Surface treatments, cements, and their interaction were significant (P<.001). For RelyX ARC, Rocatec Soft and Rocatec Plus provided the highest SBS. In general, surface treatments did not influence the SBS of RelyX U100 and Panavia F. Regardless of the cement, no significant difference was found between 50 μm and 120 μm Al2O3 particles, between Rocatec Soft and Rocatec Plus, or between Rocatec Plus and 120 μm Al2O3 particles+Rocatec Plus. All groups showed adhesive failures. Different particle sizes provided differences in morphological patterns. The elemental composition comprised Al and Al/Si for alumina and silica-abraded zirconia. Conclusions Particle size did not influence the SBS of the groups abraded exclusively with alumina or silica-coated particles. RelyX ARC was more surface-treatment dependent than RelyX U100 or Panavia F.

Coroas estéticas anteriores em cerâmica metal-free: relato de caso clínico

Society's change of parameters for health and aesthetics has resulted in an increased demand for dental treatments. Nowadays, ceramics systems have shown a substantial development, becoming more reliable and predictable. Dental ceramics, besides being chemically stable, present excellent optical properties when compared to dental structures, thus assuring a special position in the list of aesthetic restorative materials. OBJECTIVE, CASE REPORT AND CONCLUSION: This article describes a successful clinical procedure involving the anterior teeth aesthetics, which were restored with all-ceramic crowns (IPS e.max® Ivoclar Vivadent).

Reabilitação estética do sorriso por meio do sistema cerâmico dissilicato de lítio: relato de caso

The reestablishment of a harmonious smile through dental ceramics, when properly conducted and with specific indications, can achieve extremely predictable results. For aesthetic and functional rehabilitation, many ceramic materials can be used such as zirconia, leucite, alumina, feldspar, and lithium disilicate. Among these materials the lithium disilicate stands out due to the following characteristics: its resistance to wear, to chemical attack, high temperatures and oxidation; low electrical conductivity; near zero thermal expansion; good optical properties and biocompatibility with periodontal; excellent esthetics; color stability and reinforcement of tooth structure. The indications for the use of lithium disilicate are not limited to multiple facets of teeth in cases where there was no favorable response to tooth whitening, and also comprehend teeth with multiple restorations, diastema closure, shape alteration, and dental contouring, replacement of missing or fractured teeth, among others. The versatility of lithium disilicate ceramics allows its utilization in several clinical situations. The concomitant use of lithium disilicate for veneers and over metal has satisfactory aesthetic results, as reported in the present studying cases that require both aesthetics and resistance.

Atividade antimicrobiana de enxaguatórios bucais sem álcool à base de clorexidina sobre candida albicans

The aim of this study was to evaluate the antimicrobial activity of alcohol-free mouthwashes on Candida albicans. Twenty clinical isolates of C. albicans and one reference strain (ATCC 18804) were evaluated after exposure to two 0.12% chlorhexidine-based and alcohol-free (“Ca” and “Or”) in comparison to gluconate chlorhexidine with ethanol (positive control). The maximum inhibitory dilution (MID) and maximum fugal dilution (MFD) were determined by the microdilution method. Twelve serial dilutions (from 50 to 0.02%) were prepared in duplicate. Then, 100 µL of C. albicans suspension (106 cells.mL–1) were added to the wells. After incubation (37 °C/24 hours), MID was determined by reading the optical density. For MFD determination, the content of the wells were plated on Saouraud agar. For MID, there were no differences between groups Or and control, but Ca group showed a MID statistically higher (Kruskal-Wallis, p = 0.0012). For MFD, there were no differences between Ca and control (Mann-Whitney test, p = 0.1631). It can be concluded that Ca group showed a fungicid activity against C. albicans similar to the control, but lower fungistatic activity when compared to the control. Group Or showed only a fungistatic action similar to control.

Avaliação do perfil de risco de cárie dentária em gestantes de Araraquara, Brasil

The knowledge of risk of carried during pregnant is essential for an appropriate treatment using educational and preventives actions to mother for a good care of their oral health and that of children. The main objective of present retrospective study was to identify the risk of caries of pregnants (aged 15-44, mean= 25 years) came to clinic of Preventive Odontology of Araraquara-UNSEP from 1999 to 2007, using 166 medical records obtained by the third pregraduate year students, following the pre-established guidelines. The information collected includes: classification of caries risk diagnosis, pregnancy trimester, carbohydrates ingestion (between or during foods), dental plaques (O'Leary's plaque control registry) and the number of teeth with caries. The statistical analysis used the Chi2 and ANOVA tests. Most of patients showed a 25 % or more of teeth surfaces with dental plaques (92.1 %) and carbohydrates consumption among foods (89.2 %). The mean (SD) of carried and restores teeth was of 7.9 (5.1) and 4.0 (3.4), respectively and the posterior teeth were the more involved by caries/restorations. As regards the diagnosis of caries risk, classification of high risk was observed in the 38.5 % of pregnants, moderate in the 47.6 %) and low in the 13.9 %. There was a statistically significant association (p= 0.001) between the carbohydrates consumption and the diagnosis of caries risk. The plaque's rate was similar in the different trimesters of pregnancy (f= 0.223; p= 0.803). The caries risk of most pregnant women was high or moderate and it was associated with the consumption of carbohydrates.

Capacidade de termoplastificação da guta-percha com diferentes conicidades

jObjective: The objective of this study was to evaluate the thermoplasticity of the gutta-percha cones used for root canal obturation: Dentsply convencional (Dentsply Ind. e Com., Petrópolis, RJ, Brazil), Dentsply 0.04, (Dentsply Ind. e Com., Petrópolis, RJ, Brazil), Antaeos 0.04 (VDW GmbH, Munich, Germany), ProTaper (Dentsply Ind. e Com., Petrópolis, RJ, Brazil) and Alfa 0.06 (VDW GmbH, Munich, Germany). Material and method: Specimens of each material (n = 10) were prepared after heating. After 24 hours were again heated to 70 °C and placed between two glass plates and subjected to a compression of 5 kg for 2 minutes. The scanned image of the groups before and after the compression was analyzed with the software Image Tool (UTHSCSA Image Tool for Windows version 3.0, San Antonio, TX, USA). The flow capacity of the different materials was determined by the difference between the initial and final area of each specimen. The results were submitted to ANOVA and Tukey test with significance level of 5%. Result: Among the material evaluated, the gutta-percha cones Alpha 0.06 and ProTaper presented more thermoplasticity than other groups (p < 0.05). The Dentsply gutta-percha presented thermoplasticity intermediate. The groups Dentsply 0.04 and 0.04 showed lower thermoplasticity after heating (p > 0.05). Conclusion: The gutta-percha present different property of thermoplasticity, which is important to selection of thermoplastic obturation techniques.

Actividad antimicrobiana de la solución de nanopartícula de plata en cultivo de Enterococcus faecalis

Objective. The objective of this study was to evaluate the antimicrobial activity of the silver nanoparticles solution in enterococcus faecallis cultures (ATCC 29212), compared with various solutions of sodium hypoclorithe (NaOCl). Material and methods. Five Agar Petri plates were inoculated with E. faecallis and each of them was placed a cellulose dish embedded with silver nanoparticles solution, or a solution of sodium hypochlorite evaluated (Viarzon, Cloralex, Clorox). Chlorhexidine digluconate 2% was used as positive control and sterile saline solution was used as negative control. After 24 hours of incubation at 37ºc, under aerobic conditions, the zones of inhibition of bacterial growth were measured and the results subjected to the statistical t test among the experimental groups (= 5%). Results. The Cloralex showed to be the most effective reflected in the extent of inhibition in relation to other substances (p< 0.05), except that the chlorhexidine digluconate 2% (p> 0.05). The solution of silver nanoparticles provided a greater zone of inhibition than the sodium hypochlorite solution (Clorox) and Viarzon (p< 0.05). Clorox and Viarzon didn't provide zones of inhibition and were similar to each other (p> 0.05). Conclusions. The solution of silver nanoparticles presents antimicrobial activity in cultured E. faecallis, even higher than other commercial forms of sodium hypochlorite. Further studies should be carried out to determine its viability as irrigating solution in endodontics (AU)