Biology of the exploited stock of mackerel tuna E. affinis (Cantor) off the south-west region of Ceylon

According to the statistical data published annually in the Administration Report of the Director of Fisheries, the bloodfish production in 1967-68 showed about 100% increase over a period of five years and the production figures for none of the other groups of fishes have exhibited a parallel to this. Furthermore, the bloodfish group ranks first in the order of production, having displaced the herring and sardine group which had been in the lead for over a decade. This indicates that increasing attention was paid on the production of this group of fishes, in the coastal waters of Sri Lanka.

Application of a laminar flamelet model to confined explosion hazards

The majority of computational studies of confined explosion hazards apply simple and inaccurate combustion models, requiring ad hoc corrections to obtain realistic flame shapes and often predicting an order of magnitude error in the overpressures. This work describes the application of a laminar flamelet model to a series of two-dimensional test cases. The model is computationally efficient applying an algebraic expression to calculate the flame surface area, an empirical correlation for the laminar flame speed and a novel unstructured, solution adaptive numerical grid system which allows important features of the solution to be resolved close to the flame. Accurate flame shapes are predicted, the correct burning rate is predicted near the walls, and an improvement in the predicted overpressures is obtained. However, in these fully turbulent calculations the overpressures are still too high and the flame arrival times too low, indicating the need for a model for the early laminar burning phase. Due to the computational expense, it is unrealistic to model a laminar flame in the complex geometries involved and therefore a pragmatic approach is employed which constrains the flame to propagate at the laminar flame speed. Transition to turbulent burning occurs at a specified turbulent Reynolds number. With the laminar phase model included, the predicted flame arrival times increase significantly, but are still too low. However, this has no significant effect on the overpressures, which are predicted accurately for a baffled channel test case where rapid transition occurs once the flame reaches the first pair of baffles. In a channel with obstacles on the centreline, transition is more gradual and the accuracy of the predicted overpressures is reduced. However, although the accuracy is still less than desirable in some cases, it is much better than the order of magnitude error previously expected.

Comment on 'processing and microstructure of single grain uranium-doped Y-Ba-Cu-O superconductor'

We comment on the paper by N Hari Babu et al. (2002 Supercond. Sci. Technol. 15 104-10) and point out misinterpretations of the chemical composition of U-bearing deposits observed in Y123. The observed small deposits are those of new compounds which do not contain Cu, rather than refined Y211 plus U, as stated by the authors. We further note that extensive literature, not quoted, is in disagreement by nearly an order of magnitude concerning the values of Pt and U doping at which the optimum value of Jc is obtained. Other related information, presently in the literature, which may be helpful to those working with this high temperature superconducting chemical system, is presented.

The fishing centres of Lake Niassa (Mozambique): results of a frame survey made in June 1983

Results of the first frame survey of the fishing centres on the Mozambican coast of Lake Niassa, held in June 1983, are presented. A total of 41 fishing centres were detected in the area and visited. Through direct enquiries in each centre, an estimated number of 3,380 fishermen and 1,230 fishing boats (of which 25 motorized) was established. The results also provided information on the types and quantities of fishing gear used. A first estimation of the approximate total annual catch in the area gave a figure in the order of 9,100 tons., of which approximately equals 90% is landed during the rainy season. The survey is a part of a research programme on the fishing resources of Lake Niassa and of a project for the collection and organization of fisheries statistics from the artisanal fisheries of the Mozambican side of Lake Niassa.

Development of the microstructure of uranium-doped Nd-Ba-Cu-O

Melt grown Nd-Ba-Cu-O (NdBCO) has been reported to exhibit higher values of critical current density, Jc and irreversibility field, Hirr, than other (RE)BCO superconductors, such as YBCO. The microstructure of NdBCO typically contains 5-10 μm sized inclusions of the Nd4Ba2Cu2O10 phase (Nd-422) in a superconducting NdBa2Cu3O7-δ phase (Nd-123) matrix. The average size of these inclusions is characteristically larger than that of the Y2BaCuO5 (Y-211) inclusions in YBCO. As a result, there is scope to further refine the Nd-422 size to enhance Jc in NdBCO. Large grain samples of NdBCO superconductor doped with various amounts of depleted UO2 and containing excess Nd-422 have been fabricated by top seeded melt growth under reduced oxygen partial pressure. The effect of the addition of depleted UO2 on the NdBCO microstructure has been studied systematically in samples with and without added CeO2. It is observed that the addition of UO2 refines the NdBCO microstructure via the formation of uranium-containing phase particles in the superconducting matrix. These particles are of approximately spherical geometry with dimensions of around 1 μm. The average size of the nonsuperconducting phase particles in the uranium-doped microstructure is an order of magnitude less than their size in un-doped Nd-123 prepared with excess Nd-422. The critical current density of uranium-doped NdBCO is observed to increase significantly compared to the undoped material.

Measurement of the Mechanical Properties of Filtercakes

In order to improve drilling mud design to cater for specific well situations, a more comprehensive knowledge and understanding of filter cake failure is needed. This paper describes experimental techniques aimed at directly probing the mechanical properties of filter cakes, without having to take into account artefacts due to fluid flow in the substrate. The use of rheometers allows us to determine shear yield stress and dynamic shear modulii of cakes grown on filter paper. A new scraping technique measures the strength and moisture profiles of typical filter cakes with a 0.1 mm resolution. This technique also allows us to probe the adhesion between the filter cake and its rock substrate. In addition, œdometer drained consolidation and unloading of a filter cake give us compression parameters useful for Cam Clay modelling. These independent measurements give similar results as to the elastic modulus of different filter cakes, showing an order of magnitude difference between water based and oil based cakes. We find that these standard cakes behave predominantly as purely elastic materials, with a sharp transition into plastic flow, allowing for the determination of a well-defined yield stress. The effect ofsolids loading on a given type of mud is also studied.

The flexoelectric behaviour of a hypertwisted chiral nematic liquid crystal

The flexoelectric behaviour of a hypertwisted chiral nematic bimesogenic liquid crystal is presented. Through detailed electro-optic measurements, with particular emphasis on the switching properties, we demonstrate remarkably high optical axis tilt angles. The material studied possessed a room temperature nematic phase and aligned easily on cooling under the application of a moderate electric field. Switching times of the order of 500 μs and contrast ratios of 90:1 are readily achieved. The tilt angles, measured using the rotating analyser technique, were found to be practically temperature independent and linear with the applied field. Tilt angles of 22.5° were obtained with moderate applied fields of 9.4 V/μm whilst fields of 25 V/μm yielded tilt angles of 45°. We believe these are the highest tilt angles ever recorded for such fields. © 2001 OPA (Overseas Publishers Association) N.V. Published by license under the Gordon and Breach Science Publishers imprint, a member of the Taylor & Francis Group.

A three-dimensional tunnel model for calculation of train-induced ground vibration

The frequency range of interest for ground vibration from underground urban railways is approximately 20 to 100 Hz. For typical soils, the wavelengths of ground vibration in this frequency range are of the order of the spacing of train axles, the tunnel diameter and the distance from the tunnel to nearby building foundations. For accurate modelling, the interactions between these entities therefore have to be taken into account. This paper describes an analytical three-dimensional model for the dynamics of a deep underground railway tunnel of circular cross-section. The tunnel is conceptualised as an infinitely long, thin cylindrical shell surrounded by soil of infinite radial extent. The soil is modelled by means of the wave equations for an elastic continuum. The coupled problem is solved in the frequency domain by Fourier decomposition into ring modes circumferentially and a Fourier transform into the wavenumber domain longitudinally. Numerical results for the tunnel and soil responses due to a normal point load applied to the tunnel invert are presented. The tunnel model is suitable for use in combination with track models to calculate the ground vibration due to excitation by running trains and to evaluate different track configurations. © 2006 Elsevier Ltd. All rights reserved.

Contrasting code performances for computational aeroacoustics of jets

The numerical propagation of subcritical Tollmein-Schlichting (T-S), inviscid vortical and cut-on acoustic waves is explored. For the former case, the performances of the very different NEAT, NTS, HYDRA, FLUXp and OSMIS3D codes is studied. A modest/coarse hexahedral computational grid that starkly shows differences between the different codes and schemes used in them is employed. For the same order of discretization the five codes show similar results. The unstructured codes are found to propagate vortical and acoustic waves well on triangular cell meshes but not the T-S wave. The above code contrasting exercise is then carried out using implicit LES or Smagorinsky LES for and Ma = 0.9 plane jet on modest 0.5 million cell grids moving to circa 5 million cell grids. For this case, even on the coarse grid, for all codes results were generally encouraging. In general, the spread in computational results is less than the spread of the measurements. Interestingly, the finer grid turbulence intensity levels are slightly more under-predicted than those of the coarse grid. This difference is attributed to the numerical dispersion error having a favourable coarse grid influence. For a non-isothermal jet, HYDRA and NTS also give encouraging results. Peak turbulence values along the jet centreline are in better agreement with measurements than for the isothermal jets. Copyright © 2006 by University of Wales.

Acute toxicity of four heavy metals to Sphaeroma walkeri and Ciroiana bovina (Crustacea:Isopoda)

The median lethal concentrations (LC50) of two Isopoda species exposed to each tested metal (Cu. Co, Cd and Zn) in static tests for different exposure periods are quite variable depending on the tested metal The LC50 values for Sphaeroma walkeri after 24 hours exposure to Cu and Co were estimated graphically to be 11.20 and 7.00 mg/1 respectively. The correspoding values for Cirolana bovina exposed to Cu, Co, Cd and Zn were 3.60, 11.0, 3.80 and 4.80 mg/1 respectively. For 2 days the LC50 of S. walkeri exposed to Cd was 5.60 mg/l, but it was 10.10 mg/l for 3 days exposure to Zn. After prolonged exposure the LC50 values decreased proportionally with the exposure duration of the test the percentages of surviving animals demonstrated a progressive decrease with increasing concentratins as a main factor from the analysis of variance (ANOV A). The sensitivity of adult S. walkeri exposed to the four heavy metals for different exposure times ranked: Cd>Co>Zn>Cu. Cirolana bovina appeared to be more sensitive to Cu. Cd and Zn than to Co. Species in order of increasing sensitivity is C. bovina more than S. walker.

Ecology of Shakla heel (Brahmanbaria), Bangladesh

The bed Shakla, comprising an average area of 75.0 ha is located in the northeastern region (Brahmanbaria district) of Bangladesh. The study was carried out to assess the ecological aspects of bed ecosystem. Surface run-off and increase inflow of rain water from the upper stretch during monsoon cause inundation and resumption of connection between beel and parent rivers. The range of dissolved oxygen (DO) content ( 4.5-8.9 mg/L) was found congenial for aquatic life. pH was in the alkaline range (7.3-8.5) and free C02 was reletavely high. Lower values of total hardness and total alkalinity indicated less nutrients in the beel water. A wide variation (1.4-27.2 x 103 ceHs/L) in the standing crop of total plankton was recorded during study period of which phytoplankton alone contributed about 90%. Phytoplankton diversity in the beel represented by three groups viz. Chlorophyceae, Myxophyceae and Bacillariophyceae in order of abundance. A total of 52 fish species belonging to 36 genera, 20 families and 1 species of prawn were identified so far from the beel. About l3 types of fishing method were found in operation. Seine nets (moshari berja, ghono berjal) and gill net (current jal) were identified as detrimental gear killing juveniles of different species during post spawning period. Kua fishing was also found harmful due to dewatering nature. A total of 11 species belonging to 11 genera and 10 families of aquatic weeds were identified from the beet The eggs of Macrobrachium Jamarrei were identified into the Najas najas vegetation during April-September.

Electric conduction improvement of well-structured multi-walled carbon nanotubes

We characterized the electrical conductance of well-structured multi-walled carbon nanotubes (MWCNTs) which had post-treated by a rapid vacuum arc thermal annealing process and structure defects in these nanotubes are removed. We found that the after rapid vacuum arc annealing, the conductivity of well-structured MWCNTs can be improved by an order of magnitude. We also investigated the conductivity of MWCNTs bundle by the variation of temperatures. These results show that the conductance of annealed defect-free MWCNTs is sensitive to temperature imply the phonon scatting dominated the electron conductions. Compare to the well-structured MWCNTs, the defect scattering dominated the electron conduction in the as-grown control sample which has large amount of structure defects. A detail measurement of electron conduction from an individual well-structured MWCNT shows that the conductivity increases with temperatures which imply such MWCNTs exhibited semiconductor properties. We also produced back-gated field-effect transistors using these MWCNTs. It shows that the well-structured MWCNT can act as p-type semiconductor. © 2010 IEEE.

Application of the fixed point method for solution in time stepping finite element analysis using the inverse vector Jiles-Atherton model

An implementation of the inverse vector Jiles-Atherton model for the solution of non-linear hysteretic finite element problems is presented. The implementation applies the fixed point method with differential reluctivity values obtained from the Jiles-Atherton model. Differential reluctivities are usually computed using numerical differentiation, which is ill-posed and amplifies small perturbations causing large sudden increases or decreases of differential reluctivity values, which may cause numerical problems. A rule based algorithm for conditioning differential reluctivity values is presented. Unwanted perturbations on the computed differential reluctivity values are eliminated or reduced with the aim to guarantee convergence. Details of the algorithm are presented together with an evaluation of the algorithm by a numerical example. The algorithm is shown to guarantee convergence, although the rate of convergence depends on the choice of algorithm parameters. © 2011 IEEE.

Studies on the chemical control of psychrophilic bacterial spoilage of fish. 2 - The effect of antibiotics on the growth of psycrophilic bacteria isolated from marine fish

Among the various antibiotics tried, tetracyclines particularly chlorotetracycline (CTC), chloramphenicol and chlorostrep were found to be fairly effective at 8 and 10 p.p.m. levels. The order of sensitivity to CTC among the six genera studied was found to be Achromobacterof antibiotics for commercial application are discussed.

Behaviour of marine microflora towards antibiotics 1. Sensitivity towards chlortetracycline (CTC)

The sensitivity of 61 cultures of bacteria isolated from fish towards chlortetracycline (CTC) at 5 ppm and 20 ppm levels has been determined on two solid media: sea water agar (SWA) and a distilled water based medium consisting of peptone, beef extract, glucose and NaCI (PBGA). The cultures employed consisted of (i) gram-negative rods of marine origin (Achromobacter, Pseudomonas, Vibrio and Flavobacterium) and (ii) gram positive organisms (Micrococci and Corynebacterium). Depending on the inhibition zone diameter, the order of CTC sensitivity was found to be Pseudomonasof 5 and 20 ppm. The SWA enhanced the development of resistance in majority of the cultures as compared to PBGA. PBG broth containing CTC at less than 10 ppm exerted a bacteriostatic effect only while that containing 10 ppm or more exerted a bactericidal effect on Achromobacter, Pseudomonas and Micrococci cultures. The significance of these results in fish preservation by CTC is discussed.