Stable carbon and oxygen isotope ratios of benthic foraminifera from the East Atlantic Ocean

The glacial to interglacial delta13C records of the benthic foraminifera Cibicidoides wuellerstorfi and the Uvigerina peregrina group from deep-sea cores cannot be adjusted by a generally valid constant. The delta13C values of the U. peregrina group largely correlate with the accumulation rates of organic carbon, suggesting a local "habitat effect"; those of C. wuellerstorfi vary independently with respect to the carbon flux and record fluctuations in the delta13C of the ambient bottom water isotopic composition.

Oceanographic data, oxygen and methane concentrations, and C-CH4 isotope ratios measured at Jaco Scar

Methane (CH4) concentrations and CH4 stable carbon isotopic composition (d13CCH4) were investigated in the water column within Jaco Scar. It is one of several scars formed by massive slides resulting from the subduction of seamounts offshore Costa Rica, a process that can open up structural and stratigraphical pathways for migrating CH4. The release of large amounts of CH4 into the adjacent water column was discovered at the outcropping lowermost sedimentary sequence of the hanging wall in the northwest corner of Jaco Scar, where concentrations reached up to 1,500 nmol L-1. There CH4-rich fluids seeping from the sedimentary sequence stimulate both growth and activity of a dense chemosynthetic community. Additional point sources supplying CH4 at lower concentrations were identified in density layers above and below the main plume from light carbon isotope ratios. The injected CH4 is most likely a mixture of microbial and thermogenic CH4 as suggested by d13CCH4 values between -50 and -62 per mil Vienna Pee Dee Belemnite. This CH4 spreads along isopycnal surfaces throughout the whole area of the scar, and the concentrations decrease due to mixing with ocean water and microbial oxidation. The supply of CH4 appears to be persistent as repeatedly high CH4 concentrations were found within the scar over 6 years. The maximum CH4 concentration and average excess CH4 concentration at Jaco Scar indicate that CH4 seepage from scars might be as significant as seepage from other tectonic structures in the marine realm. Hence, taking into account the global abundance of scars, such structures might constitute a substantial, hitherto unconsidered contribution to natural CH4 sources at the seafloor.

Impfung gegen humane Papillomaviren (HPV) zur Prävention HPV 16/18 induzierter Zervixkarzinome und derer Vorstufen

Einleitung: Notwendige Voraussetzung für die Entstehung von Zervixkarzinomen ist eine persistierende Infektion mit humanen Papillomaviren (HPV). Die HPV-Typen 16 und 18 verursachen mit etwa 70% den überwiegenden Teil der Zervixkarzinome. Seit 2006/2007 stehen zwei Impfstoffe gegen HPV 16 und 18 zur Verfügung. Fragestellung: Wie effektiv ist die HPV-Impfung hinsichtlich der Reduktion von Zervixkarzinomen bzw. ihren Vorstufen (CIN)? Stellt die HPV-Impfung eine kosteneffektive Ergänzung zur derzeitigen Screeningpraxis dar? Gibt es Unterschiede bezüglich der Kosten-Effektivität zwischen den beiden verfügbaren Impfstoffen? Sollte aus gesundheitsökonomischer Perspektive eine Empfehlung für den Einsatz der HPV-Impfung gegeben werden? Falls ja, welche Empfehlungen bezüglich der Ausgestaltung einer Impfstrategie lassen sich ableiten? Welche ethischen, sozialen und juristischen Implikationen sind zu berücksichtigen? Methoden: Basierend auf einer systematischen Literaturrecherche werden randomisierte kontrollierte Studien zur Wirksamkeit der HPV-Impfungen für die Prävention von Zervixkarzinomen bzw. deren Vorstufen, den zervikalen intraepithelialen Neoplasien, identifiziert. Gesundheitsökonomische Modellierungen werden zur Beantwortung der ökonomischen Fragestellungen herangezogen. Die Beurteilung der Qualität der medizinischen und ökonomischen Studien erfolgt mittels anerkannter Standards zur systematischen Bewertung wissenschaftlicher Studien Ergebnisse: Bei zu Studienbeginn HPV 16/18 negativen Frauen, die alle Impfdosen erhalten haben, liegt die Wirksamkeit der Impfungen gegen HPV 16/18-induzierten CIN 2 oder höher bei 98% bis 100%. Nebenwirkungen der Impfung sind vor allem mit der Injektion assoziierte Beschwerden (Rötungen, Schwellungen, Schmerzen). Es gibt keine signifikanten Unterschiede für schwerwiegende unerwünschte Ereignisse zwischen Impf- und Placebogruppe. Die Ergebnisse der Basisfallanalysen der gesundheitsökonomischen Modellierungen reichen bei ausschließlicher Berücksichtigung direkter Kostenkomponenten von ca. 3.000 Euro bis ca. 40.000 Euro pro QALY (QALY = Qualitätskorrigiertes Lebensjahr), bzw. von ca. 9.000 Euro bis ca. 65.000 Euro pro LYG (LYG = Gewonnenes Lebensjahr). Diskussion: Nach den Ergebnissen der eingeschlossenen Studien sind die verfügbaren HPV-Impfstoffe wirksam zur Prävention gegen durch HPV 16/18 verursachte prämaligne Läsionen der Zervix. Unklar ist derzeit noch die Dauer des Impfschutzes. Hinsichtlich der Nebenwirkungen ist die Impfung als sicher einzustufen. Allerdings ist die Fallzahl der Studien nicht ausreichend groß, um das Auftreten sehr seltener Nebenwirkungen zuverlässig zu bestimmen. Inwieweit die HPV-Impfung zur Reduktion der Inzidenz und Mortalität des Zervixkarzinoms in Deutschland führen wird, hängt nicht allein von der klinischen Wirksamkeit der Impfstoffe ab, sondern wird von einer Reihe weiterer Faktoren wie der Impfquote oder den Auswirkungen der Impfungen auf die Teilnahmerate an den bestehenden Screeningprogrammen determiniert. Infolge der Heterogenität der methodischen Rahmenbedingungen und Inputparameter variieren die Ergebnisse der gesundheitsökonomischen Modellierungen erheblich. Fast alle Modellanalysen lassen jedoch den Schluss zu, dass die Einführung einer Impfung mit lebenslanger Schutzdauer bei Fortführung der derzeitigen Screeningpraxis als kosteneffektiv zu bewerten ist. Eine Gegenüberstellung der beiden verschiedenen Impfstoffe ergab, dass die Modellierung der tetravalenten Impfung bei der Berücksichtigung von QALY als Ergebnisparameter in der Regel mit einem niedrigeren (besseren) Kosten-Effektivitäts-Verhältnis einhergeht als die Modellierung der bivalenten Impfung, da auch Genitalwarzen berücksichtigt werden. In Sensitivitätsanalysen stellten sich sowohl die Schutzdauer der Impfung als auch die Höhe der Diskontierungsrate als wesentliche Einflussparameter der Kosten-Effektivität heraus. Schlussfolgerung: Die Einführung der HPV-Impfung kann zu einem verringerten Auftreten von Zervixkarzinomen bei geimpften Frauen führen. Jedoch sollten die Impfprogramme von weiteren Evaluationen begleitet werden, um die langfristige Wirksamkeit und Sicherheit beurteilen sowie die Umsetzung der Impfprogramme optimieren zu können. Von zentraler Bedeutung sind hohe Teilnahmeraten sowohl an den Impfprogrammen als auch - auch bei geimpften Frauen - an den Früherkennungsuntersuchungen. Da die Kosten-Effektivität entscheidend von der Schutzdauer, die bislang ungewiss ist, beeinflusst wird, ist eine abschließende Beurteilung der Kosten-Effektivität der HPV-Impfung nicht möglich. Eine langfristige Schutzdauer ist eine bedeutende Vorraussetzung für die Kosten-Effektivität der Impfung. Der Abschluss einer Risk-Sharing-Vereinbarung zwischen Kostenträgern und Herstellerfirmen stellt eine Option dar, um die Auswirkungen der Unsicherheit der Schutzdauer auf die Kosten-Effektivität zu begrenzen.

Membrana de alumina anódica: comportamento da microestrutura e estudo das propriedades ópticas após tratamento térmico

Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Oxygen-Nonstoichiometric YBaCo4O7+δ as a Catalyst in H2O2 Oxidation of Cyclohexene

Here we present oxygen-nonstoichiometric transition metal oxides as highly prominent candidates to catalyze the industrially important oxidation reactions of hydrocarbons when hydrogen peroxide is employed as an environmentally benign oxidant. The proof-of-concept data are revealed for the complex cobalt oxide, YBaCo4O7+δ (0 < δ < 1.5), in the oxidation process of cyclohexene. In the 2-h reaction experiments YBaCo4O7+δ was found to be significantly more active (>60 % conversion) than the commercial TiO2 catalyst (<20 %) even though its surface area was less than one tenth of that of TiO2. In the 7-h experiments with YBaCo4O7+δ, 100 % conversion of cyclohexene was achieved. Immersion calorimetry measurements showed that the high catalytic activity may be ascribed to the exceptional ability of YBaCo4O7+δ to dissociate H2O2 and release active oxygen to the oxidation reaction.

Condensed phase combustion travelling waves with sequential exothermic or endothermic reactions

The one-dimensional propagation of a combustion wave through a premixed solid fuel for two-stage kinetics is studied. We re-examine the analysis of a single reaction travelling-wave and extend it to the case of two-stage reactions. We derive an expression for the travelling wave speed in the limit of large activation energy for both reactions. The analysis shows that when both reactions are exothermic, the wave structure is similar to the single reaction case. However, when the second reaction is endothermic, the wave structure can be significantly different from single reaction case. In particular, as might be expected, a travelling wave does not necessarily exist in this case. We establish conditions in the limiting large activation energy limit for the non-existence, and for monotonicity of the temperature profile in the travelling wave.

The mechanical strength of phosphates under friction-induced cross-linking

Purpose: In the present study, we consider mechanical properties of phosphate glasses under high temperatureinduced and under friction-induced cross-linking, which enhance the modulus of elasticity. Design/methodology/approach: Two nanomechanical properties are evaluated, the first parameter is the modulus of elasticity (E) (or Young's modulus) and the second parameter is the hardness (H). Zinc meta-, pyro - and orthophosphates were recognized as amorphous-colloidal nanoparticles were synthesized under laboratory conditions and showed antiwear properties in engine oil. Findings: Young's modulus of the phosphate glasses formed under high temperature was in the 60-89 GPa range. For phosphate tribofilm formed under friction hardness and the Young's modulus were in the range of 2-10 GPa and 40-215 GPa, respectively. The degree of cross-linking during friction is provided by internal pressure of about 600 MPa and temperature close to 1000°C enhancing mechanical properties by factor of 3 (see Fig 1). Research limitations/implications: The addition of iron or aluminum ions to phosphate glasses under high temperature - and friction-induced amorphization of zinc metaphosphate and pyrophosphate tends to provide more cross-linking and mechanically stronger structures. Iron and aluminum (FeO4 or AlO4 units), incorporated into phosphate structure as network formers, contribute to the anion network bonding by converting the P=O bonds into bridging oxygen. Future work should consider on development of new of materials prepared by solgel processes, eg., zinc (II)-silicic acid. Originality/value: This paper analyses the friction pressure-induced and temperature–induced the two factors lead phosphate tribofilm glasses to chemically advanced glass structures, which may enhance the wear inhibition. Adding the coordinating ions alters the pressure at which cross-linking occurs and increases the antiwear properties of the surface material significantly.