971 resultados para Minerais acessórios


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Guaraní aquifer has relevant importance both as a source of water for several urban centres and the development of agriculture and livestock. In recharge areas the aquifer is free and, therefore, subject to contamination of effluents and tailings deposited on soils that cover it. Thus, it becomes crucial not only its protection at all levels, as the knowledge of its degree of natural vulnerability. The present work used geostatistics modeling techniques to study the natural vulnerability of the Guaraní aquifer in the city of Rio Bonito, State of São Paulo, southeastern Brazil, where the Guarani aquifer is exposed. These techniques, extensively used in evaluation studies of mineral deposits and oil tanks, can be adapted to produce a spatial classification or a regionalisation of probabilistic indices of vulnerability. By ordinary kriging method maps of vulnerability classification were obtained. To determine the vulnerability of the aquifer was employed the Aquifer Vulnerability Index (AVI), which requires knowledge of unsaturated zone thickness and permeability. The final product was a map with probabilistic index of vulnerability of the Guaraní aquifer, which presented values between 0 to 0.33 years, framing the area studied in AVI class extremely high vulnerability

Relevância:

10.00% 10.00%

Publicador:

Resumo:

No Brasil, 90% de pacientes com insuficiência renal crônica ou aguda dependem dos procedimentos de hemodiálise para remover produtos de degradação metabólica, excesso de água e de sais minerais do organismo, a fim de restaurar o equilíbrio ácido-base e eletrolítico. Entretanto, o processo de osmose reversa, que visa remover todos os íons da água, também remove o cloro, que exerce efeito bacteriostático sob diversas bactérias autóctones, que passam a se multiplicar na água. Entre os principais grupos dessas bactérias, estão os bastonetes Gram negativos não fermentadores (BGN) e os mais frequentemente associados a bacteremias, em pacientes de hemodiálise são Pseudomonas aeruginosa, Stenotrophomonas maltophilia e Burkholderia cepacia. Essas bactérias podem produzir biofilmes, o que torna sua eliminação do encanamento quase impossível. Assim, o objetivo do trabalho foi a análise de água e do dialisato, da Unidade de Hemodiálise de um Hospital Universitário, na pesquisa dos três BGNs citados. Também foram utilizadas 42 cepas previamente isoladas do mesmo local. Entre as 67 amostras de água, foram isoladas 8 cepas de Pseudomonas aeruginosa e as 50 cepas foram submetidas à pesquisa do gene rpoS, um dos responsáveis pela produção de biofilme. Esse gene foi observado em 20 (40%) cepas, sendo 16 (80%) P. aeruginosa, seguida por 3 (15%) cepas de S. maltophilia e 1 (5%) de B. cepacia. Essas cepas foram submetidas à produção de biofilme a 35ºC (temperatura ótima de crescimento) e a 20ºC (temperatura média da água no encanamento da Unidade de Hemodiálise), em aço inoxidável (material de muitos instrumentos cirúrgicos), PVC (matéria prima da tubulação) e plástico de poliestireno (capacidade de produção de biofilmes em diferentes materiais). Em poliestireno, somente 1 (5%) cepa de P. aeruginosa produziu biofilme a 35ºC e a 20ºC, 2 (10%) cepas foram... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The oil and biodiesel are oily substances which, if spilled or thrown out in the environment, can cause serious damages. In this context, bioremediation techniques can be used to the recovering of sites degradated by mineral or vegetable oil, besides them, the biodegradation. However, it is necessary that there are microorganism strains used to degradate the contaminant, previously selected for the fast, efficient and minimum impact remediation. The main objective of this study was to isolate microorganism strains coming from different ecological recesses and verify their potentiality on biodegradating oil and biodiesel. Strains of bacteria, fungi and yeasts were isolated from soils contaminated by hydrocarbons (diesel, gasoline, grease) before, by doing striations on culture plates. On the biodegradation tests, it was used the redox indicator, 2,6-dichlorophenol indophenol (DCPIP), then, after the indicador’s discoloration, the absorbance of the suspension obtained was measured. 46 different microorganism strains were isolated, and the oil, when it was used as a carbon resource, it was degradate easier than the biodiesel. The experiments showed that, in a period, the site impacted by oil spills recovers itself by the biodegradation, in aerobic conditions, by the redox activity.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The main objective of this study is to determine the activity of Po-210, Pb-210 and gross alpha/beta radioactivity in groundwater collected in Botucatu, municipality of the São Paulo state, Brazil. Samples were collected in wells to perform the radiochemical analysis. Most wells are registered in DAEE, Sabesp or CPRM. The activity of polonium was obtained by the method of alpha spectrometry, held in LABIDRO at UNESP, Rio Claro. All samples showed radioactivity values below the maximum allowed by WHO, that are: gross alpha radioactivity = 0,5 Bq/L, gross beta radioactivity = 1,0 Bq/L, Po210 = 0,2 Bq/L and Pb210 = 0,1 Bq/L. The results of hydrochemical analysis were compared with the 1469 Ordinance of the Health Ministry, and all values are bellow the maximum allowed. The data also allowed obtain the samples classification using the Piper diagram. The samples AAB, Quinta do Manacás, Faz. Quatro Irmãs, Sesi, Sitio São José and ITE are classified as calcic bicarbonate; the samples Staroup and Caio are potassic; the samples Banespa and BTC are bicarbonate and mixed interms of dissolved cations; Sitio das Palmeiras sample is sodium bicarbonate; the sample Faz. São Paulo is chlorinated calcic; the sample Sítio Btu-Pardinho chlorinated and mixed interms of dissolved cations

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The environmental diagnosis of any area affected for mining activities contributes in a positive form for the analysis of the characteristics of the environment, biological and social, thus being able to establish control parameters. The clay extration for red ceramics promotes the environment degradation as any another one cultivates of mineral goods, but in lesser scale, which had to the dimensions of potteries. Being thus, some decurrent environment characteristics of the clay extration had been inquired clearly used for potteries located in the city of Rio Claro, SP. For this, the followed method was the cadastre of these areas and potteries in created tables, searching, with this, the contribution for the involved people in the extract activity of related potteries and the facilitation in the visualization of the main problems, necessities and proposals for each one. It could be perceived that the environmental diagnosis of the areas had in common presented referring points to the places where if they find the activities. The same ones are located in the region the northwest of Rio Claro and well next one to the others. Moreover, they have in common, referring characteristics to the process of manufacture of bricks. In common, all the responsibility for the administration and course of the activities competes to the proper families, since the administrative part, even though to the process of manufacture of the bricks. Moreover, from the comment of the areas through field work, the prominent use of diverse areas in the region for the clay extration is noticed, making with that the region has great importance in the regional scene.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study focuses on metasedimentary rocks from the Passos Nappe in São Sebastião do Paraíso, southern Minas Gerais, Brazil. These rocks belong to the Internal Domain (Araxa Group) of the Southern Brasilia Belt, a Neproterozoic orogenic belt associated to the formation of the Gondwana Supercontinent. Rocks from the studied area are characterized by an inverted metamorphic gradient. Previously calculated metamorphic conditions show an increasing from geenschist facies at the base (450°C, 6 kbar), to upper amphibolite facies (750°C, 11 Kbar) at the top of the sequence. However, most of these estimates are based on Fe-Mg exchange thermometers and peak temperatures may be underestimated due to Fe-Mg exchange from cooling after peak metamorphism. In this study, we present new PT results for these rocks, based on metamorphic mineral assemblage LA-ICP-MS analyses. In the studied area, rocks from the top of the sequence have a typical granulite facies mineral assemblage: Grt+Ky+Kfs+/-Pl+liq. These rocks lack muscovite and have only minor amounts of Ti-rich, dark brown biotite. In a simplified NaKFMASH system the stability field for this mineral assemblage is bounded by the reactions Sil = Ky on the low pressure side, Ms+Ab = Ky+Kfs+liq on the low temperature side and for high-Mg bulk compositions Bt + Grt = Opx + Ky + liq on the high-temperature side. Minimum temperatures (considering post-peak reequilibration) of ca. 750°C are obtained by Fe/(Fe+Mg) values of 0.7 in garnets from a Grt+Ky+Kfs bearing sample. LA-ICP-MS results obtained for three samples show that rutiles included in garnets have up to 1847 ppm of Zr, which would translate into temperatures up to 830°C for a pressure between 12 to 15 kbar. Also for retroeclogite sample, the results indicate the contents of Zr in the garnet 537 ppm at a temperature of 708 ° C. It is noteworthy that several occurrences of retroeclogites occur in the upper part of the sequence and pressures...

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The maxillary lateral incisor has a very peculiar and internal morphology that can be influenced by the its external anatomy such as supernumerary roots and ruts deep root, which often hinders an effective endodontic treatment. Generally, this tooth have a single root with one root canal, but teeth with two to four channels can be found. The main canal can present ramifications such as accessory canals, laterals, collaterals, recorrents and apical deltas. All this factors interfere directally on endodonthics treatment. The objective of this work is a study of the internal anatomy of the maxillary lateral incisors by digital and conventional radiographics methods, comparing the results obteined by each method Six hundred upper lateral incisor were used in this study teeth of the collection of the Department of Anatomy ICT – UNESP. All the teeth were radiographed by vestibular face, using a digital radiographic unit(Dabi Atlante). After this step, all the teeth underwent by conventional radiographic technique(Kodak 2200) so that the results obtained were compared. To classify the channel system, it was adopted the classification of Pucci and Reig. All data obtained by digital technique were compared with those obtained in the conventional technique and were subjected to statistical analysis

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Epidemiological studies have shown an inverse relationship between nuts, including walnuts, intakes and chronic diseases such as cardiovascular diseases and cancers. The nuts contain phenolics compounds and flavonoids and are rich in tocopherol, phytosterols, and squalene. They are sources of carbohydrates, essential fatty acids and minerals. Since walnuts contain high levels of n-3 fatty acids and low unsaturated fatty acids, high levels of vitamin E, pholyphenols, flavonoids, arginine and fiber. The compounds possible beneficial effects are due to their antioxidant and antiproliferative activities, which are linked to a reduced risk for developing atherosclerosis and cancer. In recent years, the consumers have been showing an increased interest in nuts and walnuts because of their nutritional qualities and their potential beneficial effects on people’s health This review aims to describe the importance of beneficial bioactive compounds present in nuts and walnuts.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study presents a literature review which shows the nutritional, medicinal and antioxidant importance of mushrooms. In this research, the main antioxidant compounds of mushrooms, such as phenolic acids, flavonoids and tocopherols, as well as their mechanisms of action were described. The main in vitro methods used for evaluation of the antioxidant activity of these compounds were approached. The influences from the solvent polarity and the kind of extraction in the acquisition of the antioxidant compounds were also discussed. It was possible to conclude that mushrooms are a source of carbohydrates, proteins and minerals, thus presenting nutritional properties. The functional and medicinal properties are attributed to glucans, besides being excellent sources of natural antioxidants. Regarding the extraction process, it was noticed that the solvent polarity used in the extraction process is determinant in the obtainment of antioxidant compounds.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Da escrivaninha do autor às prateleiras das livrarias, todo texto “veste-se”, orna-se de acessórios, até tornar-se o objeto-livro, ser oferecido ao público e ser lido/consumido pelo leitor. Essas transformações, ocorridas em sua maioria na fase da editoração, podem ou não contar com a participação e, sobretudo, com o aval do autor. Quanto maior o sucesso ou prestígio da obra ou do escritor, mais próximo o autor parece estar das decisões de um lançamento e mais afastado de todos os seus desdobramentos: reedições, posteriores edições populares ou de bolso, traduções. A análise paratextual, mais especificamente a análise das capas de livros, permite-nos observar, quanto à publicação de literatura brasileira no exterior, que o mercado editorial estrangeiro adota com frequência, como vem ocorrendo há décadas, a opção com forte apelo ao exotismo tropical: paisagens cariocas, frutas coloridas, biótipos negro ou mestiço. Em algumas ocasiões, entretanto, notamos a preocupação na correspondência temática ou de gênero com a obra. Em ambos os casos os resultados podem ser surpreendentes, bem sucedidos ou provocar malentendidos e interpretações ambíguas. Propomos neste trabalho a apreciação e a análise de alguns desses casos em autores de literatura brasileira traduzidos e consagrados no exterior como escritores de literatura policial e suas vertentes: Rubem Fonseca, Patrícia Melo, Garcia-Roza e Tony Bellotto, começando por Rubem Fonseca.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Brazil processes much of its fruit by producing natural juices, candy preserves, extracts and pulps; however, almost 60% of their total weight derives from peels, leaves and seeds. As a result, the emphasis lies most strongly on the use of waste, especially waste that is not commonly used by the food industry or by consumers. The use of seeds would increase the viable sources of raw materials, lower operating costs of industries and would promote the development of new food products, since they are our main sources of protein, fat, fiber, functional compounds, vitamins and minerals salts. This paper presents alternatives for the use of pumpkin seeds (Cucurbita sp), which are often underutilized or discarded. It also demonstrates the bioactive and anti-nutritional compounds and their health effects.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The automobile industry is increasingly interested in reducing vehicle weight for greater speed, lower fuel consumption and emissions, through innovation of materials and processes. One way to do this is to seek the replacement of conventional processes by the use of structural adhesives. Structural adhesives are highly resistant materials, which can replace rivets, bolts and welds allowing the substrate / adhesive assemble is stronger than the substrate itself. One of the major advantages of gluing with respect to welding is its esthetic appearance, since it does not leave marks. For this reason, parts to be soldered require a minimum thickness so that the marks do not appear, since the pieces from gluing have no restriction as to the thickness. By replacing the vibration welding process for gluing process of the instrument panel parts of an automobile, one obtains a reduction of the thickness of the parts and therefore it decreases the weight of the car. This work aims to study the various structural adhesives that already exist on the market to be applied on the instrument panel. The mechanical test performed to measure the maximum adhesive strength was the Lap Shear Test at 23°C (room temperature), -35°C and 85°C. The types of adhesives used were the hot-melt and the bi-component. By the results obtained, it is in favor using the bi-component for application to the union of instrument panel parts