Estudo de placas elásticas pelo metodo dos elementos de contorno

Este trabajo tiene como objetivo principal oferecer una herramienta alternativa para la resolución de placas finas, presentes en edifícios, relacionadas con los métodos de cálculo adquiridos durante la universidad, calculo a través de tablas con pocas condiciones de controno. El método utilizado es el Método de los elementos de contorno que discretiza la placa en partes finitas, aproximando los resultados obtenidos a valores reales. En este trabajo se ha utilizado el programa de ordenador Placas2.for (TAGUTI,Y. 2010) basado en el Método de los elementos de contorno para la resolución de las placas finas con varias condiciones de contorno geométricas y de cargas

O efeito da autocorrelação no desempenho dos gráficos de X e R e dos gráficos de X e S²

Control charts are very important tools in statistical quality control of industrial processes and its use started last century. Since its development, the charts have always been attributed to independent processes, i.e. without any correlation between samples. But nowadays, with the high level of automation in the industrial environment, it is noticeable the autocorrelation factor between samples. The main Xcharts used in monitoring quality characteristics represented by continuous variables are the mean (X ), amplitude (R) and variance (S²). Therefore, this work aims to analyze the performance of X and R charts and in of X and S² charts with different sample sizes (4 and 5) for monitoring autocorrelated processes. Through computer simulations using the Fortran software and the use of mathematical expressions was possible to obtain data and performance analysis of the detection power charts for independent observations and for autocorrelated observations according to the model AR (1). The results show that the effect of autocorrelation reduces the ability of monitoring the control charts and that, the greater this effect, the slower the chart becomes in misfits signaling

Formas diferenciais

In this work, studies aimed at evaluating the unification of concepts and theorems of vector analysis that contributed to the understanding of physical problems in a more comprehensive and more concise than using vector calculus. We study the electrodinamics with differential forms. Were also presented Maxwell's relations with formalism of differential forms in addition allowing formulation one more geometric and generalized. Another feature observed during the study of formalism presented was the possibility of it serving as a substitute to the tensor formalism

Um estudo sobre a resolução de problemas e suas relações com a afetividade

This research aims at examining the relationship between the performance of elementary school students Cycle I in problem solving and attitudes toward mathematics. For this, a research was conducted at a state school in the city of Bauru which was selected for convenience. Participants were randomly selected consisting of 75 students, of whom 21 were third years and 57 were of three classes of fifth year. The instruments used for data collection were: a informative questionnaire to characterize the students in age, grade, favorite subjects and the least liked, among others, an attitude scale, Likert type, to examine the attitudes toward mathematics; a interviews with 11 selected students according to scores on the attitudes and mathematical problems to be solved through the method of thinking aloud. The results showed that the major difficulties encountered by students in solving problems were: to understand the problems, formalizing the reasoning, recognize in the problem the algorithms needed for its resolution, make calculations with decimal numbers, do combinatorics, using the sum of equal portions instead of multiplying, self-confidence and autonomy in what he was doing, and others; participants with positive attitudes towards mathematics showed greater confidence to solve problems as well as a greater understanding on what was required by them, but were not detected significant relation between the attitudes and performance, since it was unfavorable

Cálculo fracionário aplicado ao movimento browniano

This work aims to study several diffusive regimes, especially Brownian motion. We deal with problems involving anomalous diffusion using the method of fractional derivatives and fractional integrals. We introduce concepts of fractional calculus and apply it to the generalized Langevin equation. Through the fractional Laplace transform we calculate the values of diffusion coefficients for two super diffusive cases, verifying the validity of the method

O uso do material manipulativo Tangram e de jogos como estratégias de motivação para a aprendizagem de frações

In this research, we analyzed the use of manipulative materials and games as motivators tools that facilitate the comprehension of fractions content when presented to a class of students from the 9th grade from a public school in Guaratinguetá-SP city. The students are 14 and 17 years old. Initially we presented the benefits that could bring manipulative materials for teaching and learning with understanding, followed by historical accounts of the Tangram material. We show the advantages of the games, when properly used in activities classroom. The game titled Dominoes fractions using the Tangram was applied in order to check if students retook properly the fractions contents. This research was motivated students to participate in math classes and this motivation may have promoted the understanding of the contents worked

Influência do uso de malhas de sombreamento azul, vermelha e preta no desenvolvimento inicial do pepino Taiko

Cucumber (Cucumis sativus L.) is a plant of the Cucurbitaceae family of great commercial importance and their culture is widespread throughout the country. The production of vegetables, high-quality care begins with training ranging from seedlings and shading techniques have an important role in creating environments more conducive to the production of seedlings and many researchers and producers of seedlings have opted for the use of color shading screens, making this way, the wavelength and the amount of incident energy are changed in favor of the plants. Work will be performed at the Department of Forest Sciences, Faculty of Agricultural Sciences, Universidade Estadual Paulista (UNESP), Botucatu campus. The statistical design will be in three blocks, each containing 100 plots of each treatment (seedlings covered with blue screen, red and black). Evaluations of dry mass and height will be made at 7, 14, 21 and 28 days after emergence, and 5 will be selected seedlings of each treatment. At 14 and 28 DAE was measured, and SPAD chlorophyll content at 30 DAE, was evaluated by measuring gas exchange in the second pair of leaves, fully expanded for each plant, which was put in a chamber controlled with infrared gas analyzer (IRGA LI 6400, Licor) to perform measurements of photosynthesis. Treatment with black shading showed statistically better results for total dry matter, plant height, SPAD chlorophyll content and net assimilation of CO2, showing a better quality seedlings and its use is recommended in the cultivation of cucumber Taiko

Redução do tempo de ciclo baseado na produção enxuta em uma rémontagem de tubos de freios e combustível

In today's competitive environment of automakers, it is essential to obtain the highest efficiency of the production process. This paper presents a study in a pre-assembly of brake pipes and fuel of a vehicle where the value stream maps and information (VSM – Value Stream Mapping) were designed in order to improve the process by reducing the Lead Time Production of a product, reducing waste and decrease time between processes. This work can be divided into three stages, the first building the VSM of the initial state, the second VSM of the proposed state and finally the VSM than was actually performed and to present the gains were achieved effectively. The proposed VSM would lead to a gain of 54% in lead time and 61% in processing time, since the VSM implemented had gains of 47% in lead time and 48% in processing time even without major investments as originally proposed. Concluding that even without big investment, using the techniques of lean manufacturing is possible to achieve high levels of process efficiency

Análise da viabilidade de simulações com feixes de prótons de 100, 150, 200 e 250 MeV em alvos heterogêneos

In the recent years, the use of proton beams in radiotherapy has been an outstanding progress (SMITH, 2006). Up to now, computed tomography (CT) is a prerequisite for treatment planning in this kind of therapy because it provides the electron density distribution required for calculation of dose and the interval of doses. However, the use of CT images for proton treatment planning ignores fundamental differences in physical interaction processes between photons and protons and is, therefore, potentially inaccurate (SADROZINSKI, 2004). Proton CT (pCT) can in principle directly measure the density distribution needed in a patient for the dose distribution (SCHULTE, et al, 2004). One important problem that should be solved is the implementation of image reconstruction algorithms. In this sense, it is necessary to know how the presence of materials with different density and composition interfere in the energy deposition by ionization and coulomb excitation, during its trajectory. The study was conducted in two stages, was used in both the program SRIM (The Stopping and Range of Ions in Matter) to perform simulations of the interaction of proton beams with pencil beam type. In the first step we used the energies in the range of 100-250 MeV (ZIEGLER, 1999). The targets were set to 50 mm in length for the beam of 100 MeV, due to its interaction with the target, and short-range, and 70 mm for 150, 200 and 250 MeV The target was composed of liquid water and a layer of 6 mm cortical bone (ICRP). It were made 9 simulations varying the position of the heterogeneity of 5 mm. In the second step the energy of 250 MeV was taken out from the simulations, due to its greater energy and less interaction. The targets were diminished to 50 mm thick to standardize the simulations. The layer of bone was divided into two equal parts and both were put in the ends of the target... (Complete abstract click electronic access below)

Ciclo PDCA e ferramentas da qualidade em operações e serviços de e-commerce

The market has forced companies to maintain high levels of control over their processes , ensuring a product or service quality to its customers . This study comes in the issuance and registration carried out in a company of e-commerce , which is showing problems with the values of weights and dimensions used in the cases cited . The need to eliminate wasteful spending freight caused by shipment of products weighing more than the reality, and to increase the reliability of the information used in the management of processes led to the planning of this project . This work focuses on the development of a PDCA cycle to work in the identification and correction of the causes of the problem , in order to neutralize the current complications and ensure that the problem does not appear again. To aid the mapping of the processes involved , identifying the causes of the problem and implementation of the proposed improvements were used quality tools such as flowcharts , Ishikawa diagrams , Pareto diagrams , and applied statistics

Estimação de densidades e aplicação em segmentação de imagens

The aim of this work is to study some of the density estimation tec- niques and to apply to the segmentation of medical images. Medical images are used to help the diagnostic of tumor diseases as well as to plan and deliver treatment. A computer image is an array of values representing colors in some scale. The smallest element of the image to which it is possible to assign a value is called pixel. Segmen- tation is the process of dividing the image in portions through the classi¯cation of each pixel. The simplest way of classi¯cation is by thresholding, given the number of portions and the threshold values. Another method is constructing a histogram of the pixel values and assign a portion to each pike. The threshold is the mean between two pikes. As the histogram does not form a smooth curve it is di±cult to discern between true pikes and random variation. Density estimation methods allow the estimation of a smooth curve. Image data can be considered as mixture of different densities. In this project parametric and nonparametric methods for density estimation will be addressed and some of them are applied to CT image data

Explorando abordagens de múltiplos rótulos por floresta de caminhos ótimos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Um modelo algébrico do quantificador da ubiquidade

Pós-graduação em Filosofia - FFC

Estudo exploratório sobre o desempenho em aritmética utilizando o soroban como ferramenta auxiliar

Pós-graduação em Matemática em Rede Nacional - IBILCE

Os três problemas clássicos da Matemática grega

Pós-graduação em Matemática em Rede Nacional - IBILCE