High strain rate constitutive modeling forhistorical structures subjected to blast loading

Doctoral Thesis Civil Engineering

Mechanical fatigue performance of PCL-chondroprogenitor constructs after cell culture under bioreactor mechanical stimulus

In tissue engineering of cartilage, polymeric scaffolds are implanted in the damaged tissue and subjected to repeated compression loading cycles. The possibility of failure due to mechanical fatigue has not been properly addressed in these scaffolds. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. This is related to inherent discontinuities in the material due to the micropore structure of the macro-pore walls that act as stress concentration points. In this work, chondrogenic precursor cells have been seeded in Poly-ε-caprolactone (PCL) scaffolds with fibrin and some were submitted to free swelling culture and others to cyclic loading in a bioreactor. After cell culture, all the samples were analyzed for fatigue behavior under repeated loading-unloading cycles. Moreover, some components of the extracellular matrix (ECM) were identified. No differences were observed between samples undergoing free swelling or bioreactor loading conditions, neither respect to matrix components nor to mechanical performance to fatigue. The ECM did not achieve the desired preponderance of collagen type II over collagen type I which is considered the main characteristic of hyaline cartilage ECM. However, prediction in PCL with ECM constructs was possible up to 600 cycles, an enhanced performance when compared to previous works. PCL after cell culture presents an improved fatigue resistance, despite the fact that the measured elastic modulus at the first cycle was similar to PCL with poly(vinyl alcohol) samples. This finding suggests that fatigue analysis in tissue engineering constructs can provide additional information missed with traditional mechanical measurements.

Mycotoxin contamination of Maize and Guinea corn from markets in Plateau State, Nigeria

Maize (Zea mays) and guinea corn (Sorghum bicolor) are major food items in Plateau state, Nigeria. A multistage sampling technique was used to select the markets and store/warehouses used for this study; sample collection employed a simple random sampling method from different sampling points within designated areas. A total of 18 representative samples were collected and analyzed for the following mycotoxins: aflatoxins (Aflatoxin B1 - AFB1, Aflatoxin B2 - AFB2, Aflatoxin G1 - AFG1 and Aflatoxin G2 - AFG2), fumonisins (Fumonisin B1 - FB1 and Fumonisin B2 - FB2 ) and cyclopiazonic acid (CPA). Out of 12 samples analyzed for Aflatoxins, AFB1 was detected in 5, AFB2 in 1, AFG1 in 1 and AFG2 in 6 samples respectively. The highest concentration of AFB1 and AFG2 were found in maize samples from Pankshin market. Only maize samples from Mangu market were contaminated with AFB2 and also harboured the lowest concentration of AFG2. AFG1 contamination occurred in only guinea corn from Shendam market. and FB1 was detected in all 18 samples analyzed. The mycotoxin CPA was not detected in any of the samples. Aflatoxins levels in analyzed samples were regarded as safe based on Nigerian and European Union maximum permissible levels of 4g/kg. With the exception of two samples, FB1 levels in analyzed maize samples were within European Union maximum permissible levels of 1,000 to 3000g/kg. The health and food safety implications of these results for the human and animal population are further discussed.

Poker learner: modelação de jogadores através de data mining

Dissertação de mestrado integrado em Engenharia e Gestão de Sistemas de Informação

An algorithmic approach to estimating the minimal number of periodic points for smooth self-maps of simply-connected manifolds

For a given self-map f of M, a closed smooth connected and simply-connected manifold of dimension m ≥ 4, we provide an algorithm for estimating the values of the topological invariant Dm r [f], which equals the minimal number of r-periodic points in the smooth homotopy class of f. Our results are based on the combinatorial scheme for computing Dm r [f] introduced by G. Graff and J. Jezierski [J. Fixed Point Theory Appl. 13 (2013), 63–84]. An open-source implementation of the algorithm programmed in C++ is publicly available at http://www.pawelpilarczyk.com/combtop/.

Desenvolvimento de um Posto de Carregamento Lento com BMS e Interface com o Cockpit para o CEPIUM

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e de Computadores

In vitro and in vivo studies of temozolomide loading in zeolite structures as drug delivery systems for glioblastoma

Zeolites Y (faujasite) and MOR (mordonite) were used as hosts for temozolomide (TMZ), a current good-standard chemotherapeutic agent used in the treatment of glioblastoma brain tumors. TMZ was loaded into zeolites by liquid-phase adsorption at controlled pH. FTIR, 1H NMR, MS, SEM, UV/vis and chemical analysis demonstrated the successful loading of TMZ into zeolite hosts. The hydrolysis of TMZ in MTIC (TMZ metabolite) after the preparation of drug delivery systems (DDS) was observed in simulated body fluid. The effect of zeolites and DDS were evaluated on the viability of glioblastoma cell lines. Unloaded Y zeolite presented toxicity to cancer cells in contrast to MOR. In accordance, the best results in potentiation of the TMZ effect was obtained with MOR. We found that mordonite loaded with 0.026 mmol of TMZ was able to decrease the half maximal inhibitory concentrations (IC50) at least 3-fold in comparison to free temozolomide both in vitro and in vivo.

Response of blood pressure to maximum exercise in hypertensive patients under different therapeutic programs

OBJECTIVE: To evaluate the behavior of blood pressure during exercise in patients with hypertension controlled by frontline antihypertension drugs. METHODS: From 979ergometric tests we retrospectively selected 49 hipertensive patients (19 males). The age was 53±12 years old and normal range rest arterial pressure (<=140/90 mmHg) all on pharmacological monotherapy. There were 12 on beta blockers; 14 on calcium antagonists, 13 on diuretics and 10 on angiotensin converting enzyme inhibitor. Abnormal exercise behhavior of blood pressure was diagnosed if anyone of the following criteria was detected: peak systolic pressure above 220 mmHg, raising of systolic pressure > or = 10 mmHg/MET; or increase of diastolic pressure greater than 15 mmHg. RESULTS: Physiologic response of arterial blood pressure occurred in 50% of patients on beta blockers, the best one (p<0.05), in 36% and 31% on calcium antagonists and on diuretics, respectively, and in 20% on angiotensin converting enzyme inhibitor, the later the leastr one (p<0.05). CONCLUSION: Beta-blockers were more effective than calcium antagonists, diuretics and angiotensin-converting enzyme inhibitors in controlling blood pressure during exercise, and angiotensin converting enzyme inhibitors the least effective drugs.

Differences in muscular activity between obese and non-obese workers during manual lifting

The prevalence of obesity is increasing throughout the workforce. Manual lifting tasks are common and can produce significant muscle loading. This study compared muscular activity between obese and non-obese subjects, using surface Electromyography (EMG), during manual lifting. Six different lifting tasks (with 5, 10 and 15 kg loads in free and constrained styles) were performed by 14 participants with different obesity levels. EMG data normalization was based on the percentage of Maximum Contraction during each Task (MCT). Muscle Activation Times (AT) before each task were also evaluated. The study suggests that obesity can increase MCT and delay muscle AT. These findings reinforce the need to develop further studies focused on obesity as a risk factor for the development of musculoskeletal disorders.

Hierarchical modelling of timber reference properties using probabilistic methods: Maximum Likelihood Method, Bayesian Methods and Probability Networks

In recent decades, an increased interest has been evidenced in the research on multi-scale hierarchical modelling in the field of mechanics, and also in the field of wood products and timber engineering. One of the main motivations for hierar-chical modelling is to understand how properties, composition and structure at lower scale levels may influence and be used to predict the material properties on a macroscopic and structural engineering scale. This chapter presents the applicability of statistic and probabilistic methods, such as the Maximum Likelihood method and Bayesian methods, in the representation of timber’s mechanical properties and its inference accounting to prior information obtained in different importance scales. These methods allow to analyse distinct timber’s reference properties, such as density, bending stiffness and strength, and hierarchically consider information obtained through different non, semi or destructive tests. The basis and fundaments of the methods are described and also recommendations and limitations are discussed. The methods may be used in several contexts, however require an expert’s knowledge to assess the correct statistic fitting and define the correlation arrangement between properties.

Risk stratification with troponin I in patients undergoing myocardial revascularization surgery

OBJECTIVE: To determine the immediate behavior and the prognostic value in terms of late survival of serum troponin I measurement in patients undergoing myocardial revascularization surgery with extracorporeal circulation. METHODS: We studied 88 random patients, 65 (73.8%) of the male sex, who underwent myocardial revascularization surgery with extracorporeal circulation. Troponin measurements were performed as follows: in the preoperative period, right after intensive care unit admission, and on the first and second postoperative days. Values below 0.1 nanogram per milliliter (ng/mL) were considered normal. The cut points for late prognostic assessment were 0.5 ng/mL; 1 ng/mL; 2.5 ng/mL; and 5 ng/mL. RESULTS: The serum troponin I levels were elevated on the first postoperative day, suggesting the occurrence of specific myocardial damage. Patients with a poor prognosis could be identified, because the serum levels above 2.5 ng/mL and 5 ng/mL in the postoperative period resulted, respectively, in mortality rates of 33% and 50% in a maximum 6-month follow-up. CONCLUSION: Troponin I values around 2.5 ng/mL in the postoperative period should call attention to the need for more aggressive diagnostic or therapeutical measures.

Variabilidad paleoambiental desde el Último Máximo Glacial en la región Centro-Sur de Argentina: Paleocirculación atmosférica, variabilidad hidroclimática y dimensión humana. Palaeoenvironmental variability from the Last Glacial Maximum in the Central-Southern region of Argentina: Atmospheric Palaeocirculation, Hydroclimatic Variability and Human Dimension.

El proyecto tiene como propósito caracterizar la variabilidad de la paleocirculación atmosférica en las latitudes medias de Sudamérica, su efecto sobre la fluctuación hidroclimática regional y la vulnerabilidad humana frente a los cambios ocurridos desde el Ultimo Máximo Glacial/Holoceno. El enfoque inter y multidisciplinaro aquí planteado para analizar la varibiliad hidroclimática pasada, sus causas y consecuencias, es inédito para esta región del país. El mismo contempla: a) análisis de archivos climáticos sedimentarios con una aproximación de multi-indicadores (sedimentología, geoquímica, isótopos estables y radiogénicos, mineralogía, ostrácodos y moluscos); b) determinación de la dinámica actual y pasada del polvo atmosférico (PA) combinando mediciones in situ y en registros sedimentarios y c) análisis de restos óseos humanos y malacológicos en sitios arqueológicos.Se contempla: a) Efectuar análisis de multi-indicadores de registros climáticos naturales almacenados en sistemas lacustres de la región Pampeana (S. Ambargasta, Mar Chiquita, Pocho, Melincué, Lagunas Encadenadas del Oeste de Buenos Aires) y en secuencias loessicas para inferir la variabilidad de la circulación atmosférica desde el UMG; b) Ampliar la resolución temporal de las reconstrucciones climáticas para ventanas de tiempo seleccionadas; c) Analizar la señal geoquímica del registro sedimentario de fases climáticas contrastantes; d) Identificar la variabilidad temporal de la procedencia y de los procesos actuantes mediante análisis mineralógicos y geoquímicos; e) Analizar el ambiente actual para calibrar indicadores ambientales o proxies (isótopos, flujo de sedimentos, geoquímica, moluscos y ostrácodos) con el escenario climático contemporáneo; f) Analizar en conjunto los archivos climáticos para inferir patrones de paleocirculación atmosférica regional y g) Dilucidar estrategias adaptativas y la historia biológica de poblaciones humanas en la región central de Argentina durante fases climáticas diversas.Este proyecto aborda uno de los aspectos menos conocidos de las reconstrucciones paleoambientales, que está relacionado con rol del material eólico derivado del Hemisferio Sur y el impacto que genera sobre el ciclo regional del Carbono. A pesar que el sur de Sudamérica es una de las áreas claves para entender este aspecto, no se conoce de forma acabada la incidencia de los cambios ambientales sobre el flujo de PA o el efecto de futuros cambios climáticos y/o uso de la tierra.La actividad planteada tiene implicancias directas sobre múltiples disciplinas como las ciencias atmosféricas, geoquímica, sedimentología, paleoclimatologia y bioarqueología. Nuestros resultados permitirán mejorar el entendimiento del cambio climático regional, la dinámica del polvo y su rol como forzante del sistema climático, la variabilidad hidrológica presente y pasada y la respuesta por parte de las poblaciones humanas. Profundizar el estudio de los cambios paleoclimáticos y bioarqueológicos en la región permitirá analizar la variabilidad hidroclimática y determinar su relación con las situaciones de crisis y vulnerabilidad del pobamiento humano. Asimismo, la inferencia de cambios para períodos con mínima o sin influencia humana es una herramienta clave para mejorar el conocimiento de las fluctuaciones climáticas del área extratropical Sudamericana. Estos resultados permitirán analizar no sólo los mecanismos operados en el sistema climático pasado sino también aquellos factores que explicarían el gran cambio hidroclimático registrado desde 1970 cuyos efectos han impactado claramente sobre las actividades socio-económicos en la región central Argentina.

Acoustic emission analysis of the effect of a 2D wedge shaped blade on the compact bone cutting process

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 – 64dB) from fracture related signals (65 – 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.

Age, growth and reproductive biology of whiting Merlangius merlangus (Linnaeus 1758) in the Celtic Sea

Age, growth and reproductive biology were investigated for whiting (Merlangius merlangus) captured from the Celtic Sea (ICES division Vllg), for the period January 2001 to January 2002. Females dominated the sex ratio of 1: 2.25. The relative abundance of females exceeded the number of males in all length classes. The relationship between weight (g) and total length (cm) was the same for male and female whiting. A total of 973 fish were aged and the maximum age recorded was 11 years. Results from an intercalibration exercise showed 87% agreement in age readings between the author and an expert in ageing whiting at the Marine Institute. Females were dominated by 2 year olds, while males were dominated by 3 year olds. Lx was estimated as 38cm and a growth rate was calculated K = 0.3769 year'1. Females were fully recruited to the fishery at 3 years of age, while the age at full recruitment (tr) for males was 4 years. Female whiting spawned from late February to June 2001 and matured at a total length of 23 cm in their first year. Female whiting reached L5o at a total length of 28 cm and 2.7 years of age. Male whiting spawned from February to June 2001. They matured at a total length of 21 cm and in their first year. Male whiting reached L50 at a total length of 30.4 cm and 3.6 years of age. The following critical points should be taken into account in the management of the Celtic Sea whiting stock: An Fpa should be established in order to assess the current level of fishing mortality; The maturity ogives need further study; The extent of gutting of large fish before landing by fishers in the fleet should be investigated and the apparent decline in size of 4 - 7 year old fish in the Celtic Sea between 1996 and 2001 needs to be assessed.

The effects of detergent loading on rotating biological contactor (RBC) wastewater treatment efficiency

There are presently over 182 RBC plants, treating domestic wastewater, in the Republic of Ireland, 136 of which have been installed since 1986. The use of this treatment plant technology, although not new, is becoming increasingly popular. The aim of this research was to assess the effects that a household detergent has on rotating biological contractor treatment plant efficiency. Household detergents contribute phosphorus to the surrounding environment and can also remove beneficial biomass from the disc media. A simple modification was made to a conventional flat disc unit to increase the oxygen transfer of the process. The treatment efficiency of the modified RBC (with aeration cups attached) was assessed against a parallel conventional system, with and without degergent loading. The parameters monitored were chemical oxygen demand (COD), bio-chemical oxygen demand (BOD), nitrates, phosphates, dissolved oxygen, the motors power consumption, pH, and temperature. Some microscopic analysis of the biofilm was also to be carried out. The treatment efficiency of both units was compared, based on COD/BOD removal. The degree of nitrification achievable by both units was also assessed with any fluctuations in pH noted. Monitoring of the phosphorus removal capabilities of both units was undertaken. Relationships between detergent concentrations and COD removal efficiencies were also analysed.