Estudio de la estructura de autofunciones de sistemas caóticos en una base de funciones de scar

El problema central que aborda esta tesis doctoral es el estudio de la correspondencia entre la mecanica clasica y la mecanica cuantica en sistemas hamiltonianos clasicamente caoticos, tema que se enmarca dentro del llamado caos cuantico. En concreto, en este trabajo proponemos un nuevo y efectivo metodo para calcular las autofunciones de sistemas caoticos usando una base de funciones de scar. Dichas funciones de scar juegan un papel fundamental en el estudio de las manifestaciones cuanticas del caos, ya que se trata de funciones de onda semiclasicas con una dispersion muy peque~na y localizadas a lo largo de las variedades invariantes de las orbitas periodicas inestables del sistema que conforman la estructura organizativa del caos clasico. El metodo de calculo desarrollado se ha denominado Metodo de Gram- Schmidt Selectivo (MGSS), dado que construye la base haciendo uso del metodo de Gram{Schmidt convencional pero teniendo en cuenta, ademas, la dispersi on de las funciones de scar y la longitud de la orbita periodica a lo largo de la cual se localizan. El MGSS nos ha permitido calcular con gran precision las 2400 autofunciones con menor energa de un oscilador cuartico altamente caotico con dos grados de libertad acoplados, as como autofunciones muy excitadas en una ventana de energa, utilizando en ambos casos una base mucho mas eciente que las descritas en la literatura. Ademas, hemos empleado el MGSS para calcular las autofunciones del sistema molecular LiNC/LiCN, que presenta un espacio de fases con zonas de regularidad y con regiones en las que el movimiento es altamente caotico; en este ultimo sistema, hemos calculado de forma muy eciente las autofunciones asociadas a las primeras 66 energas. Finalmente, hemos propuesto un metodo perturbativo para calcular velocidades de reaccion en sistemas abiertos descritos por potenciales anarmonicos. Con este metodo, hemos calculado la velocidad de reaccion de distintos potenciales de uno y dos grados de libertad, as como la velocidad de isomerizacion del sistema molecular LiNC/LiCN, tanto sometido a un ruido blanco (sin correlaciones) como en presencia de un ba~no de atomos de argon, lo que constituye un entorno con correlaciones. El metodo desarrollado es independiente de la supercie divisoria y nos ha permitido obtener correcciones analticas a la famosa formula de Kramers, lo que posibilita el calculo exacto de velocidades de reaccion en potenciales anarmonicos que interaccionan con el entorno.

Contribución a los modelos de gestión de las redes móviles ad hoc

La capacidad de comunicación de los seres humanos ha crecido gracias a la evolución de dispositivos móviles cada vez más pequeños, manejables, potentes, de mayor autonomía y más asequibles. Esta tendencia muestra que en un futuro próximo cercano cada persona llevaría consigo por lo menos un dispositivo de altas prestaciones. Estos dispositivos tienen incorporados algunas formas de comunicación: red de telefonía, redes inalámbricas, bluetooth, entre otras. Lo que les permite también ser empleados para la configuración de redes móviles Ad Hoc. Las redes móviles Ad Hoc, son redes temporales y autoconfigurables, no necesitan un punto de acceso para que los nodos intercambien información entre sí. Cada nodo realiza las tareas de encaminador cuando sea requerido. Los nodos se pueden mover, cambiando de ubicación a discreción. La autonomía de estos dispositivos depende de las estrategias de como sus recursos son utilizados. De tal forma que los protocolos, algoritmos o modelos deben ser diseñados de forma eficiente para no impactar el rendimiento del dispositivo, siempre buscando un equilibrio entre sobrecarga y usabilidad. Es importante definir una gestión adecuada de estas redes especialmente cuando estén siendo utilizados en escenarios críticos como los de emergencias, desastres naturales, conflictos bélicos. La presente tesis doctoral muestra una solución eficiente para la gestión de redes móviles Ad Hoc. La solución contempla dos componentes principales: la definición de un modelo de gestión para redes móviles de alta disponibilidad y la creación de un protocolo de enrutamiento jerárquico asociado al modelo. El modelo de gestión propuesto, denominado High Availability Management Ad Hoc Network (HAMAN), es definido en una estructura de cuatro niveles, acceso, distribución, inteligencia e infraestructura. Además se describen los componentes de cada nivel: tipos de nodos, protocolos y funcionamiento. Se estudian también las interfaces de comunicación entre cada componente y la relación de estas con los niveles definidos. Como parte del modelo se diseña el protocolo de enrutamiento Ad Hoc, denominado Backup Cluster Head Protocol (BCHP), que utiliza como estrategia de encaminamiento el empleo de cluster y jerarquías. Cada cluster tiene un Jefe de Cluster que concentra la información de enrutamiento y de gestión y la envía al destino cuando esta fuera de su área de cobertura. Para mejorar la disponibilidad de la red el protocolo utiliza un Jefe de Cluster de Respaldo el que asume las funciones del nodo principal del cluster cuando este tiene un problema. El modelo HAMAN es validado a través de un proceso la simulación del protocolo BCHP. El protocolo BCHP se implementa en la herramienta Network Simulator 2 (NS2) para ser simulado, comparado y contrastado con el protocolo de enrutamiento jerárquico Cluster Based Routing Protocol (CBRP) y con el protocolo de enrutamiento Ad Hoc reactivo denominado Ad Hoc On Demand Distance Vector Routing (AODV). Abstract The communication skills of humans has grown thanks to the evolution of mobile devices become smaller, manageable, powerful, more autonomy and more affordable. This trend shows that in the near future each person will carry at least one high-performance device. These high-performance devices have some forms of communication incorporated: telephony network, wireless networks, bluetooth, among others. What can also be used for configuring mobile Ad Hoc networks. Ad Hoc mobile networks, are temporary and self-configuring networks, do not need an access point for exchange information between their nodes. Each node performs the router tasks as required. The nodes can move, change location at will. The autonomy of these devices depends on the strategies of how its resources are used. So that the protocols, algorithms or models should be designed to efficiently without impacting device performance seeking a balance between overhead and usability. It is important to define appropriate management of these networks, especially when being used in critical scenarios such as emergencies, natural disasters, wars. The present research shows an efficient solution for managing mobile ad hoc networks. The solution comprises two main components: the definition of a management model for highly available mobile networks and the creation of a hierarchical routing protocol associated with the model. The proposed management model, called High Availability Management Ad Hoc Network (HAMAN) is defined in a four-level structure: access, distribution, intelligence and infrastructure. The components of each level: types of nodes, protocols, structure of a node are shown and detailed. It also explores the communication interfaces between each component and the relationship of these with the levels defined. The Ad Hoc routing protocol proposed, called Backup Cluster Head Protocol( BCHP), use of cluster and hierarchies like strategies. Each cluster has a cluster head which concentrates the routing information and management and sent to the destination when out of cluster coverage area. To improve the availability of the network protocol uses a Backup Cluster Head who assumes the functions of the node of the cluster when it has a problem. The HAMAN model is validated accross the simulation of their BCHP routing protocol. BCHP protocol has been implemented in the simulation tool Network Simulator 2 (NS2) to be simulated, compared and contrasted with a hierarchical routing protocol Cluster Based Routing Protocol (CBRP) and a routing protocol called Reactive Ad Hoc On Demand Distance Vector Routing (AODV).

European legislation and implementation measures in the management of construction and demolition waste.

The intense activity in the construction sector during the last decade has generated huge volumes of construction and demolition (C&D) waste. In average, Europe has generated around 890 million tonnes of construction and demolition waste per year. Although now the activity has entered in a phase of decline, due to the change of the economic cycle, we don’t have to forget all the problems caused by such waste, or rather, by their management which is still far from achieving the overall target of 70% for C&D waste --excludes soil and stones not containing dangerous substances-- should be recycled in the EU Countries by 2020 (Waste Framework Directive). But in fact, the reality is that only 50% of the C&D waste generated in EU is recycled and 40% of it corresponds to the recycling of soil and stones not containing dangerous substances. Aware of this situation, the European Countries are implementing national policies as well as different measures to prevent the waste that can be avoidable and to promote measures to increase recycling and recovering. In this aspect, this article gives an overview of the amount of C&D waste generated in European countries, as well as the amount of this waste that is being recycled and the different measures that European countries have applied to solve this situation.

Sustainable Planning And Land Valuation, New Forms Of Suburban Growth In Areas Of The Spanish Mediterranean Coast

The present study analyzes residential models in coastal areas with large influxes of tourism, the sustainability of their planning and its repercussion on urban values. The project seeks to establish a methodology for territorial valuation through the analysis of externalities that have influenced urban growth and its impact on the formation of residential real estate values. This will make it possible to create a map for qualitative land valuation, resulting from a combination of environmental, landscape, social and productive valuations. This in turn will establish a reference value for each of the areas in question, as well as their spatial interrelations. These values become guidelines for the study of different territorial scenarios, which help improve the sustainable territorial planning process. This is a rating scale for urban planning. The results allow us to establish how the specific characteristics of the coast are valued and how they can be incorporated into sustainable development policies.

Microstructural and mechanical study of AL2O3/Er3Al5O12 eutectic rods grown by the laser floating zone method

Eutectic rods of Al2O3–Er3Al5O12 were grown by directional solidification using the laser-heated floating zone method at rates in the range 25–1500 mm/h. Their microstructure and mechanical properties (hardness, toughness and strength) were investigated as a function of the growth rate. A homogeneous and interpenetrated microstructure was found in most cases, and interphase spacing decreased with growth rate following the Hunt–Jackson law. Hardness increased slightly as the interphase spacing decreased while toughness was low and independent of the microstructure. The rods presented very high bending strength as a result of the homogeneous microstructure, and their strength increased rapidly as the interphase spacing decreased, reaching a maximum of 2.7 GPa for the rods grown at 750 mm/h. The bending strength remained constant up to 1300 K and decreased above this temperature. The relationship between the microstructure and the mechanical properties was established from the analysis of the microstructure and of the fracture mechanisms

Impact And Explosive Loads On Concrete Buildings Using Shell And Beam Type Elements

The threat of impact or explosive loads is regrettably a scenario to be taken into account in the design of lifeline or critical civilian buildings. These are often made of concrete and not specifically designed for military threats. Numerical simulation of such cases may be undertaken with the aid of state of the art explicit dynamic codes, however several difficult challenges are inherent to such models: the material modeling for the concrete anisotropic failure, consideration of reinforcement bars and important structural details, adequate modeling of pressure waves from explosions in complex geometries, and efficient solution to models of complete buildings which can realistically assess failure modes. In this work we employ LS-Dyna for calculation, with Lagrangian finite elements and explicit time integration. Reinforced concrete may be represented in a fairly accurate fashion with recent models such as CSCM model [1] and segregated rebars constrained within the continuum mesh. However, such models cannot be realistically employed for complete models of large buildings, due to limitations of time and computer resources. The use of structural beam and shell elements for this purpose would be the obvious solution, with much lower computational cost. However, this modeling requires careful calibration in order to reproduce adequately the highly nonlinear response of structural concrete members, including bending with and without compression, cracking or plastic crushing, plastic deformation of reinforcement, erosion of vanished elements etc. The main objective of this work is to provide a strategy for modeling such scenarios based on structural elements, using available material models for structural elements [2] and techniques to include the reinforcement in a realistic way. These models are calibrated against fully three-dimensional models and shown to be accurate enough. At the same time they provide the basis for realistic simulation of impact and explosion on full-scale buildings

A Mobile Feedback System for Integrated E-health Platforms to improve Self-Care and Compliance of Diabetes Mellitus Patients

Exploiting the full potential of telemedical systems means using platform based solutions: data are recovered from biomedical sensors, hospital information systems, care-givers, as well as patients themselves, and are processed and redistributed in an either centralized or, more probably, decentralized way. The integration of all these different devices, and interfaces, as well as the automated analysis and representation of all the pieces of information are current key challenges in telemedicine. Mobile phone technology has just begun to offer great opportunities of using this diverse information for guiding, warning, and educating patients, thus increasing their autonomy and adherence to their prescriptions. However, most of these existing mobile solutions are not based on platform systems and therefore represent limited, isolated applications. This article depicts how telemedical systems, based on integrated health data platforms, can maximize prescription adherence in chronic patients through mobile feedback. The application described here has been developed in an EU-funded R&D project called METABO, dedicated to patients with type 1 or type 2 Diabetes Mellitus

Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature

The microstructural evolution of an AZ31 rolled sheet during dynamic deformation at strain rates of ∼103 s−1 has been investigated by electron backscatter diffraction, X-ray and neutron diffraction. The influence of orientation on the predominant deformation mechanisms and on the recovery processes taking place during deformation has been systematically examined. The results have been compared with those corresponding to the same alloy tested quasi-statically under equivalent conditions. It has been found that strain rate enhances the activation of extension twinning dramatically, while contraction and secondary twinning are not significantly influenced. The polarity of extension twinning is even reversed in some grains under selected testing conditions. Significant grain subdivision by the formation of geometrically necessary boundaries (GNBs) takes place during both quasi-static and dynamic deformation of this AZ31 alloy. It is remarkable that GNBs of high misorientations form even at the highest strain rates. The phenomenon of recovery has been found to be orientation dependent

Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)

GRC is a cementitious composite material made up of a cement mortar matrix and chopped glass fibers. Due to its outstanding mechanical properties, GRC has been widely used to produce cladding panels and some civil engineering elements. Impact failure of cladding panels made of GRC may occur during production if some tool falls onto the panel, due to stone or other objects impacting at low velocities or caused by debris projected after a blast. Impact failure of a front panel of a building may have not only an important economic value but also human lives may be at risk if broken pieces of the panel fall from the building to the pavement. Therefore, knowing GRC impact strength is necessary to prevent economic costs and putting human lives at risk. One-stage light gas gun is an impact test machine capable of testing different materials subjected to impact loads. An experimental program was carried out, testing GRC samples of five different formulations, commonly used in building industry. Steel spheres were shot at different velocities on square GRC samples. The residual velocity of the projectiles was obtained both using a high speed camera with multiframe exposure and measuring the projectile’s penetration depth in molding clay blocks. Tests were performed on young and artificially aged GRC samples to compare GRC’s behavior when subjected to high strain rates. Numerical simulations using a hydrocode were made to analyze which parameters are most important during an impact event. GRC impact strength was obtained from test results. Also, GRC’s embrittlement, caused by GRC aging, has no influence on GRC impact behavior due to the small size of the projectile. Also, glass fibers used in GRC production only maintain GRC panels’ integrity but have no influence on GRC’s impact strength. Numerical models have reproduced accurately impact tests.

Development and Assessment of the Competence Creativity Applied to Technical Drawing

The results obtained after incorporating the competence “creativity” to the subject Technical Drawing of the first course of the Degree in Forestry, Technical University of Madrid, are presented in this study.At first, learning activities which could serve two functions at the same time -developing students’ creativity and developing other specific competences of the subject- were considered. Besides, changes in the assessment procedure were made and a method which analyzes two aspects of the assessment of the competence creativity was established. On the one hand, the products are evaluated by analyzing the outcomes obtained by students in the essays suggested and by establishing a parameter to assess the creativity expressed in those essays. On the other, an assessment of the student is directly carried out through a psychometric test which has been previously chosen by the team.Moreover, these results can be applied to similar or could be of general application

Coastal Factors and Coastal Inland. Flooding Managemenet

Siguiendo el proyecto europeo Smartest se plantea el problema de las inundaciones y su gestión en zonas urbanas en las proximidades de la costa

Análisis de imágenes basado en correlación de imágenes

El objetivo principal del proyecto es la realización de una aplicación en el programa MATLAB. En primer lugar, realizaremos un estudio teórico relativo al tema de nuestro proyecto. En nuestro caso como el tema es Imagen y Televisión, explicaremos de forma teórica la información principal acerca del Tratamiento Digital de la Imagen. Una vez conocida las técnicas principales utilizadas en el tratamiento digital, realizaremos un estudio exhaustivo en las técnicas actuales que existen acerca del análisis de imágenes. Daremos una breve explicación mostrando en qué consiste esta técnica, los diferentes pasos que se llevan a cabo en una imagen para su análisis, explicando brevemente cada unos de ellos y enumerando algunas técnicas para la realización de cada una de ellas. Tras esta primera parte, nos centraremos en las técnicas de correlación de imágenes (DIC). Explicaremos como han surgido estas técnicas, cual son sus principales conceptos, sus inicios y las ventajas e inconvenientes que tienen. Dentro de las diferentes técnicas de correlación de imágenes, explicaremos de forma detallada la correspondencia por áreas, ya que es la técnica que vamos a utilizar para la realización del proyecto. Explicaremos en qué consiste, y desarrollaremos teóricamente cual son los pasos que se deben realizar en las imágenes para realizar esta técnica. Explicaremos cual es su terminología, y cuáles son los posibles defectos que puede tener esta técnica. Finalmente, una vez estudiada la teoría, realizaremos una sencilla aplicación que nos permita evaluar y encontrar las diferencias en una secuencia de imágenes. El programa utilizado para este proyecto es MATLAB, que es un programa matemático, utilizado enormemente en el ámbito de la ingeniería. Mediante esta aplicación obtendremos dos figuras, una de ellas donde veremos los vectores de movimiento que existen entre las dos imágenes y la segunda, donde obtendremos el factor de correlación que hay entre las dos imágenes. ABSTRACT OF MY PROJECT The main objective of the project is the development of an application in MATLAB program. Firstly carry out a theoretical study on the topic of our project. In our case as the theme is Picture and Television, we explain the main information about Digital Image Processing. Once known the main techniques used in digital images, we will make a study on current techniques that exist about image analysis. We will give a brief explanation showing what this technique is, the different steps that are performed on an image for analysis, briefly explaining each of them and listing some techniques for performing each. After this first part, we will focus on the techniques of image correlation (DIC). We explain how these techniques have emerged, which are the main concepts, the beginning and the advantages and disadvantages they have. There are different image correlation techniques. We will explain in detail the correspondence areas, as it is the technique that we will use for the project. Explain what it is, which is theoretically and we develop steps that must be performed on the images for this technique. We explain what their terminology is, and what are the possible defects that may have this technique. Finally, having explored the theory images, we will make a simple application that allows us to evaluate and find differences in a sequence of images. The program used for this project is MATLAB, a mathematical program, widely used in the field of engineering. Using this application will get two figures, one where we will see the motion vectors between the two images and the second where we get the correlation factor between the two images.

Structural behaviour and design criteria of under-deck cable-stayed bridges subjected to seismic action

Under-deck cable-stayed bridges are very effective structural systems for which the strong contribution of the stay cables under live loading allows for the design of very slender decks for persistent and transient loading scenarios. Their behaviour when subjected to seismic excitation is investigated herein and a set of design criteria are presented that relate to the type and arrangement of bearings, the number and configuration of struts, and the transverse distribution of stay cables. The nonlinear behaviour of these bridges when subject to both near-field and far-field accelerograms has been thoroughly investigated through the use of incremental dynamic analyses. An intensity measure that reflects the pertinent contributions to response when several vibration modes are activated was proposed and is shown to be effective for the analysis of this structural type. The under-deck cable-stay system contributes in a very positive manner to reducing the response when the bridges are subject to very strong seismic excitation. For such scenarios, the reduction in the stiffness of the deck because of crack formation, when prestressed concrete decks are used, mobilises the cable system and enhances the overall performance of the system. Sets of natural accelerograms that are compliant with the prescriptions of Eurocode 8 were also applied to propose a set of design criteria for this bridge type in areas prone to earthquakes. Particular attention is given to outlining the optimal strategies for the deployment of bearings

Quinine doped hybrid sol-gel coatings for wave guiding and optical applications

Pure and quinine doped silica coatings have been prepared over sodalime glasses. The coatings were consolidated at low temperature (range 60-180 A degrees C) preserving optical activity of quinine molecule. We designed a device to test the guiding properties of the coatings. We confirmed with this device that light injected in pure silica coatings is guided over distances of meters while quinine presence induces isotropic photoluminescence. With the combined use of both type of coatings, it is possible to design light guiding devices and illuminate regions in glass elements without electronic circuits.

Indicators and Estimators in P-Adaptive Boundary Elements

The paper presents the possibility of implementing a p-adaptive process with the B.E.M. Although the exemples show that good results can be obtained with a limited amount of storage and with the simple ideas explained above, more research is needed in order to improve the two main problems of the method, i.e.: the criteria of where to refine and until what degree. Mathematically based reasoning is still lacking and will be useful to simplify the decission making. Nevertheless the method seems promising and, we hope, opens a path for a series of research lines of maximum interest. Although the paper has dealt only with plane potential problem the extension to plane elasticity as well as to 3-D potential problem is straight-forward.