Influência de formas do relevo em atributos físicos de um latossolo sob cultivo de cana-de-açúcar

Os atributos físicos do solo variam em função das formas do relevo e sofrem influência da mineralogia da fração argila e do manejo da cultura de cana-de-açúcar, podendo interferir no processo de compactação do solo. Este trabalho foi realizado com o objetivo de avaliar o estado dos atributos físicos em diferentes formas do relevo em um Latossolo Vermelho eutroférrico argiloso sob cultivo de cana-de-açúcar. A área apresenta duas formas de relevo: uma côncava, que ocorre nas posições mais elevadas, e uma linear, constituída pelos segmentos ombro, escarpa, meia encosta e encosta inferior. As amostras de solo foram coletadas durante o ciclo da cultura, nas camadas de 0,00-0,15m, 0,15-0,30m e 0,30-0,45m, para determinação do teor de matéria orgânica e dos seguintes atributos físicos: densidade do solo, porosidade total, macroporosidade, microporosidade, resistência do solo à penetração e teor de água no solo. A mineralogia mais gibbsítica e o maior teor de matéria orgânica, encontrada na forma de relevo côncava e de segmento ombro, proporciona menores valores de densidade do solo, de resistência do solo à penetração e de microporosidade e maiores valores de macroporosidade e de porosidade total do que a mineralogia mais caulinítica, encontrada nos demais segmentos da forma linear.

Influência da energia de soldagem em uniões de lâminas finas através de laser pulsado de Nd:YAG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização das áreas de cultivo da bananeira 'maçã' na região de Ribeirão do Sul/SP

Objetivou-se com este trabalho caracterizar os produtores de bananeira 'Maçã' do município de Ribeirão do Sul/SP, quanto à tecnologia empregada no cultivo da frutífera e à produção obtida. A partir desta avaliação preliminar, pretendeu-se estabelecer algumas inferências com relação à incidência da doença Mal-do-Panamá e o diagnóstico nutricional das propriedades. Através dos questionários aplicados, bem como das análises foliares e de solo, detectou-se que os produtores realizam a prática da adubação e calagem sem resultados de análise de solo, não realizam análises foliares e que os teores de nutrientes no solo e nas folhas apresentam-se em níveis desbalanceados para muitas propriedades avaliadas. A incidência da doença Mal-do-Panamá foi considerada baixa ou ausente em 65% das propriedades avaliadas.

População protozoários ciliados e degradabilidade ruminal em búfalos e bovinos zebuínos sob dieta à base de cana-de-açúcar

Três búfalos e três bovinos zebuínos adultos com cânulas ruminais foram alimentados à vontade com dieta de cana-de-açúcar fresca e picada, suplementada com 3 kg de concentrado/animal, durante 13 semanas. Após duas semanas de adaptação, amostras do conteúdo ruminal foram coletadas semanalmente, em dois tempos de amostragem: antes da alimentação e 40 minutos após para determinação da concentração e composição da fauna ruminal. Na quinta semana do experimento, os conteúdos ruminais foram misturados e reinoculados entre animais de mesma espécie e, na última semana, estimadas as degradabilidades in situ da MS, PB e FDN da cana-de-açúcar e MS e PB do concentrado. A concentração média de protozoários foi maior em bovinos, de 4,85 x 10(5)/mL, que em búfalos, de 3,82 x 10(5)/mL. As composições genéricas para Entodinium e subfamília Diplodiniinae foram 79,2 e 6,2% em bovinos e 32,0 e 54,9% em búfalos, respectivamente. Não houve interação significativa entre espécies animais e tempo de amostragem. Houve aumento da concentração média dos holotricos após 40 minutos da alimentação. As degradabilidades efetivas dos nutrientes estudados foram semelhantes entre as duas espécies animais, observando-se diferenças na cinética da degradação. Concluiu-se que os búfalos apresentaram menor concentração de ciliados no rúmen, maior composição de Diplodiniinae e menor de Entodinium que os bovinos; os holotricos exibiram capacidade de migração e seqüestro no rúmen em ambas as espécies; e as diferenças na fauna ruminal não influenciaram a degradabilidade efetiva dos nutrientes da cana-de-açúcar e do concentrado.

Anatomia quantitativa da folha e do colmo de Brachiaria brizantha (Hochst. ex A. Rich.) Stapf e B. humidicola (Rendle) Schweick

As características da digestão das forragens podem ser mais bem compreendidas quando complementadas com estudos de anatomia dos tecidos de plantas forrageiras. Com o objetivo de agregar novas informações ao tema, determinou-se a área dos diversos tecidos presentes na folha e no colmo de Brachiaria brizantha e B. humidicola, em três diferentes níveis de inserção no perfilho. O experimento foi conduzido em casa de vegetação, com plantas mantidas em vasos plásticos contendo areia esterilizada e recebendo solução nutritiva de macro e micronutrientes. Após 70 dias do corte de uniformização das parcelas (vasos), coletou-se o segmento do colmo e da folha (limbo e bainha) situado na porção mediana de cada um dos três diferentes níveis de inserção do perfilho estudado. As amostras foram emblocadas em GMA, seccionadas em micrótomo e o laminário fotomicrografado. As fotografias foram digitalizadas e as áreas de tecidos, mensuradas com software Image Tool. Observou-se que o limbo das folhas basilares apresentou menor área de tecido vascular lignificado. Maior área de tecido parenquimático foi observada na bainha e no colmo da B. brizantha. em relação à B. humidicola, a B. brizantha apresentou maior área de tecido vascular lignificado no limbo, bainha e colmo. Maior distância entre os feixes vasculares foi observada no limbo e na bainha, sendo o número de feixes maior no limbo e no colmo.

Absence of relaxor-like ferroelectric phase transition in (Pb,Sr)TiO3 thin films

We have performed dielectric and micro-Raman spectroscopy measurements in the 298 - 673 K temperature range in polycrystalline Pb0.50Sr0.50TiO3 thin films prepared by a soft chemical method. The phase transition have been investigated by dielectric measurements at various frequencies during the heating cycle. It was found that the temperature corresponding to the peak value of the dielectric constant is frequency-independent, indicating a non-relaxor ferroelectric behavior. However, the dielectric constant versus temperature curves associated with the ferroelectric to paraelectric phase transition showed a broad maximum peak at around 433 K. The observed behavior is explained in terms of a diffuse phase transition. The obtained Raman spectra indicate the presence of a local symmetry disorder, due to a higher strontium concentration in the host lattice. The monitoring of some modes, conducted in the Pb0.50Sr0.50TiO3 thin films, showed that the ferroelectric tetragonal phase undergoes a transition to the paraelectric cubic phase at around 423 K. However, the Raman activity did not disappear, as would be expected from a transition to the cubic paraelectric phase. The strong Raman spectrum observed for this cubic phase is indicative that a diffuse-type phase transition is taking place. This behavior is attributed to distortions of the perovskite structure, allowing the persistence of low-symmetry phase features in cubic phase high above the transition temperature. This result is in contrast to the forbidden first-order Raman spectrum, which would be expected from a cubic paraelectric phase, such as the one observed at high temperature in pure PbTiO3 perovskite.

Caracterização morfológica dos estádios de desenvolvimento do aparelho reprodutor masculino da rã-touro, Rana catesbeiana, no sistema anfigranja de criação intensiva

The objective of this work was to caracterize the morphological characterization of the development stages of male reproduction apparel of bullfrog Rana catesbeiana from intensive Anfigranja system. During the period of one year, 657 bullfrog males were removed from regrowing and reproduction sections in Anfigranja system to study basic aspects of the reproduction of this specie. The collections were realized monthly and, in that occasion, the body and testicles weights for each animal were recorded and their macroscopic gonadal characteristics, registred. Testicles from 274 males were removed and histologically analyzed. From the macro and microscopic gonadal characteristics, analysis set of the testicles, five stages of gonadal maturation for the male of Rana catesbeiana were determined: juvenile, beginning of maturation, intermediate maturation, advanced maturation and spent.

Characterization of BaTi1-xZrxO3 thin films obtained by a soft chemical spin-coating technique

Single-phase perovskite structure BaZrxTi1-xO3 (BZT) (0.05less than or equal toxless than or equal to0.25) thin films were deposited on Pt-Ti-SiO2-Si substrates by the spin-coating technique. The structural modifications in the thin films were studied using x-ray diffraction and micro-Raman scattering techniques. Lattice parameters calculated from x-ray data indicate an increase in lattice (a axis) with the increasing content of zirconium in these films. Such Zr substitution also result in variations of the phonon mode wave numbers, especially those of lower wave numbers, for BaZrxTi1-xO3 thin films, corroborate to the structural change caused by the zirconium doping. on the other hand, Raman modes persist above structural phase transition, although all optical modes should be Raman inactive in the cubic phase. The origin of these modes must be interpreted as a function of a local breakdown of the cubic symmetry, which could be a result of some kind of disorder. The BZT thin films exhibited a satisfactory dielectric constant close to 181-138, and low dielectric loss tan delta<0.03 at the frequency of 1 kHz. The leakage current density of the BZT thin films was studied at elevated temperatures and the data obey the Schottky emission model. Through this analysis the Schottky barrier height values 0.68, 1.39, and 1.24 eV were estimated to the BZT5, BZT15, and BZT25 thin films, respectively. (C) 2004 American Institute of Physics.

Produtividade e qualidade de frutos do mamoeiro em função de tipos e doses de biofertilizantes

Biofertilizers are organic products usually obtained from an anaerobic process, evaluated mainly as phytoprotectors for agriculture, although they can improve fruit production. By this way, a field experiment was carried out in Remigio County, Paraiba State, Brazil, to evaluate the effects of two bovine biofertilizers on yield, medium mass and quality of papaya fruits (Carica papaya L.), 'Baixinho de Santa Amalia cultivar. Treatments were distributed in a randomized complete blocks design with three replications and 15 plants in each parcel, in a 2 x 5 factorial arrangement, with two biofertilizers: simple (water and fresh bovine manure) and supermagro (water, fresh bovine manure, macro and micronutrients and a protein mix), applied in soil under liquid form at five volumes, as follows: 0.0; 0.5; 1.0; 1.5; e 2.0 L cave(-1). There was no statistical difference between biofertilizers for fruit mass, yield and external and internal fruit quality variables, while between volumes differences were registered for both biofertilizers. The results, except for fruit firmness, registered positive effects of the biofertilizers on 'Baixinho de Santa Amalia' papaya cultivar in relation to yield and physical and chemical fruit quality.

Advances in phase-stepping real-time holography using photorefractive sillenite crystals

This work presents a review of recent developments in phase-stepping real-time holographic interferometry with photorefractive sillenite crystals. Quantitative results are shown in micro-rotation, micro-displacement, and micro-deformation measurements, and in wave-optics and surface analysis as well. The phase stepping was carried out in a four-frame process and the resulting phase map was unwrapped by applying a sin/cos filter. The experimental results are in good agreement with the ones obtained through other means, showing the promising potentialities of phase-stepping real-time holographic interferometry for in situ visualisation, monitoring and analysis in non-destructive testing.

Effects of post-annealing on the dielectric properties of Au/BaTiO3/Pt thin film capacitors

Barium titanate thin films were prepared by the polymeric precursor method and deposited onto Pt/Ti/SiO2/Si substrates. X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR) and micro-Raman spectroscopy were used to investigate the formation of the BaTiO3 perovskite phase. Afterwards, the films were submitted to post-annealing treatments in oxygen and nitrogen atmospheres at 300 degreesC for 2 h, and had their dielectric properties measured. It was observed that the electric properties of the thin films are very sensitive to the nature of the post-annealing atmosphere. This study demonstrates that post-annealing in an oxygen atmosphere increases the dielectric relaxation phenomenon and that post-annealing in a nitrogen atmosphere produces a slight dielectric relaxation. (C) 2004 Elsevier B.V All rights reserved.

Caracterização morfológica dos estádios de desenvolvimento do aparelho reprodutor feminino da rã-touro, Rana catesbeiana, no sistema anfigranja de criação intensiva

The objective of this work was to caracterize the morphological characterization of the development stages of female reproduction apparel of bullfrog Rana catesbeiana from intensive Anfigranja system. During the period of one year, 836 bullfrog females were removed from regrowing and reproduction sections of the Anfigranja system to study the basic aspects of the reproduction of this specie. The collections were realized monthly and, in that occasion, the body and ovary weights for each animal were recorded and their macroscopic gonadal characteristics, registred. The ovaries from 303 females were removed and histologically examined. From the macro and microscopic characteristics analysis set of the ovary, five stages of gonadal maturation for the female of Rana catesbeiana were determined: juvenile, beginning of maturation, intermediate maturation, advance maturation and spent.

Caracterizacion metalografica de aleaciones metalicas utilizadas como biomateriales en implantes quirurgicos

In this work, the chemical structure, the microstructure and the surface morphology of two non-ferrous materials used in dental implants (Ti-6Al-4V and Co-Cr-Mo) were studied. This was done by chemical analysis, scanning electron microscopy (SEM), energy disperse spectroscopy (EDS), and strength measurements (HV). Metallographic studies reveal that titanium alloy surface present a fine granular binary phase structure, while cobalt alloy present cast dendrite structures with an intense precipitation of carbides. To correlate the macro and microstructure with the mechanical behavior of the material, microhardness measurements were performed. Using the Vickers hardening method, the Ti-6Al-4V alloy yielded strength mean values smaller than the Co-Cr-Mo alloy. Their values are associated to the chemical composition and to the microstructural distribution of these materials. The Ti-6Al-4V alloy presents hardness similar to dental enamel, which suggests better performance as dental implant.

Produção de composto orgânico a partir de residuos de plantas medicinais

Extraction of active principles from medicinal plants generates wastes usually discharged. This process does not extract minerals from plant tissues, which may be considered of great value in organic composting. Wastes of 81 medicinal plant species processed at Centroflora/Anidro industry were analyzed for macro and micronutrients, and according to the results, three different ways to elaborate the compost were proposed: a) wastes of medicinal plants with high content of a specific mineral, aiming to fertilize soils where would be cultivated species that need high quantities of that mineral; b) wastes with mineral contents in order to support specific failures on mineral content of a soil; c) wastes of the eleven richest species in each nutrient that should elevate all mineral contents in soil.

Caracterização anatômica da folha de Cymbopogon citratus (DC.) Stapf (Poaceae) e perfil químico do óleo essencial

The objective of the work was to accomplish an anatomical and ultrastructural study of mature leaf of Cymbopogon citratus (Poaceae) and analyze the essential oil through Gas Chromatography (GC). For the anatomical study, the material was fixed in FAA, followed bytheethyl dehydration and infiltration of the material in synthetic resin. For the ultrastructural study, the material was fixed and Kamovsky, dehydrated in acetone, dried to the critical point and metallized. For the analysis in GC, the essential oil it was obtained by steam distillation of leaves and analyzed by Gas Chromatography. Through the anatomical study it was observed that the faces of mesophyll are distinctly, the bulliform cells occupy the adaxial surface of the leaf and in the medium region are situated the biggest vascular bundles involved by sclerenchymatous hem with extensions reaching both epidermis. Between the biggest vascular bundles are observed three to five small vascular bundles, linkage only in the abaxial epidermis. Shortly, pointed and unicellular structures, called prickle-hair, had been observed inserted above the veins and micro-hair, that they consist of a long basal cell and an oval distal cell, that are located between the regions of vascular bundles. The chromatogram sample shows that the analyzed essential oil presented three majority components, responsible for 87% of the relative composition of the oil. These components are monoterpenos, justifying the strong smell of the essential oil.