Conflito de interesses ambientais: o passado, o presente e o futuro da gestão sustentávelno município de Botucatu (SP)

Entrepreneurs responsible for the housing project “Vale do Sol III”, (claim of deployment), proposed a technique, in order to resolve conflicts of interest arising in respect Vale do Sol I residents (already implemented). Conflicts taken place in accordance with environmental problems that originated (past) in poor drainage of rainwater from Água Fria stream. This work, based on study case method with deductive approach, analyzed the environmental aspects of the area in order to contribute to the process of sustainable management of medium-sized cities (present), as well as analyzing the prospects for adequate outcome environmental demand (future) . In terms of technical and methodological procedures, was used geoprocessing softwares for the purpose of supporting analysis. It was concluded that, technique proposed at Vale do Sol III enterprise, don’t have necessary, sufficient and satisfactory solution in order to, at least, mitigate the problems of area sustainability. In terms of future prospects, it was concluded that, good sustainable environmental management, with preventive measures, from the point of view of mitigating the environmental and urban conflicts, and corrective measures.

Perdas na colheita mecanizada de algodão em variabilidade espacial e em função de velocidades de colheita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

Organic material decomposition and nutrient dynamics in a mulch system enriched with leguminous trees in the Amazon

As novas técnicas propostas para a agricultura na Amazônia incluem sistema de rotação de capoeira enriquecido com árvores leguminosas e transformando a queima da biomassa em cobertura morta sobre o solo. A decomposição e a liberação de nutrientes da cobertura morta foram estudadas usando sacos de liteira com malha fina que continham cinco tratamentos com diferentes espécies de leguminosas em comparação a um tratamento-controle com vegetação natural. As amostras para cada tratamento foram analisadas para conteúdos de C total, N, P, K, Ca, Mg, lignina, celulose e polifenóis solúveis em diferentes tempos de amostragem durante um ano. A razão constante de decomposição variou com a espécie e com o tempo. A perda de massa nos sacos de decomposição foi de 30,1 % para Acacia angustissima, de 32,7 % para Sclerolobium paniculatum, de 33,9 % para Inga edulis e para a vegetação secundária, de 45,2 % para Acacia mangium e de 63,6 % para Clitoria racemosa. Foi observada imobilização de N e P em todos os tratamentos, sendo a mineralização do N negativamente correlacionada com o fenol, razão C/N, razão (lignina + fenol)/N, razão fenol/P e o conteúdo de N nos sacos de liteira. Depois de 362 dias de incubação no campo, 3,3 % de K, 32,2 % de Ca e 22,4 % de Mg permaneceram no material em decomposição. Os resultados evidenciaram que a baixa qualidade mineral e a alta quantidade de carbono orgânico e aplicado como cobertura morta podem limitar a quantidade de energia disponível para os microrganismos resultando em uma competição por nutrientes com as plantas agrícolas.

Elimination of All-Optical Cycles in Wavelength-Routed Optical Networks

A transparent (wide-area) wavelength-routed optical network may be constructed by using wavelength cross-connect switches connected together by fiber to form an arbitrary mesh structure. The network is accessed through electronic stations that are attached to some of these cross-connects. These wavelength cross-connect switches have the property that they may configure themselves into unspecified states. Each input port of a switch is always connected to some output port of the switch whether or not such a connection is required for the purpose of information transfer. Due to the presence of these unspecified states, there exists the possibility of setting up unintended alloptical cycles in the network (viz., a loop with no terminating electronics in it). If such a cycle contains amplifiers [e.g., Erbium- Doped Fiber Amplifiers (EDFA’s)], there exists the possibility that the net loop gain is greater than the net loop loss. The amplified spontaneous emission (ASE) noise from amplifiers can build up in such a feedback loop to saturate the amplifiers and result in oscillations of the ASE noise in the loop. Such all-optical cycles as defined above (and hereafter referred to as “white” cycles) must be eliminated from an optical network in order for the network to perform any useful operation. Furthermore, for the realistic case in which the wavelength cross-connects result in signal crosstalk, there is a possibility of having closed cycles with oscillating crosstalk signals. We examine algorithms that set up new transparent optical connections upon request while avoiding the creation of such cycles in the network. These algorithms attempt to find a route for a connection and then (in a post-processing fashion) configure switches such that white cycles that might get created would automatically get eliminated. In addition, our call-set-up algorithms can avoid the possibility of crosstalk cycles.

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

ICHTHYOPLANKTON DISTRIBUTION AND ABUNDANCE IN THE NORTHERN TODOS OS SANTOS AND CAMAMU BAYS, BAHIA STATE - BRAZIL

The occurrence, distribution and abundance of ichthyoplankton in Todos os Santos and Camamu Bays were analyzed based on four samplings (winter 2003, summer 2003, winter 2004 and summer 2005). Samples were obtained by surface horizontal hauls, using a 200-mu m mesh conical-cylinder plankton net. The distribution and abundance of eggs indicate a remarkable seasonal and annual variation of spawning activity in the region, especially when the two summer campaigns are compared. In summer 2003 the highest quantitative values were recorded, especially for Camamu, where the maximum reached 106.56 eggs.m(-3), with an overall average of 43.46 eggs.m(-3) for the two areas. In summer 2005 values were relatively low, the overall average being 3.49 eggs.m(-3). The larval taxonomic composition is characterized by the predominance of gobiids, with small variation from summer to winter. Considering all the campaigns and samplings undertaken in both areas, larvae of 11 families were identified: Engraulidae, Clupeidae, Mugilidae, Atherinopsidae, Hemiramphidae, Syngnathidae, Blenniidae, Carangidae, Gobiidae, Achiridae and Tetraodontidae.

Interactive quadrangulation with reeb atlases and connectivity textures

Creating high-quality quad meshes from triangulated surfaces is a highly nontrivial task that necessitates consideration of various application specific metrics of quality. In our work, we follow the premise that automatic reconstruction techniques may not generate outputs meeting all the subjective quality expectations of the user. Instead, we put the user at the center of the process by providing a flexible, interactive approach to quadrangulation design. By combining scalar field topology and combinatorial connectivity techniques, we present a new framework, following a coarse to fine design philosophy, which allows for explicit control of the subjective quality criteria on the output quad mesh, at interactive rates. Our quadrangulation framework uses the new notion of Reeb atlas editing, to define with a small amount of interactions a coarse quadrangulation of the model, capturing the main features of the shape, with user prescribed extraordinary vertices and alignment. Fine grain tuning is easily achieved with the notion of connectivity texturing, which allows for additional extraordinary vertices specification and explicit feature alignment, to capture the high-frequency geometries. Experiments demonstrate the interactivity and flexibility of our approach, as well as its ability to generate quad meshes of arbitrary resolution with high-quality statistics, while meeting the user's own subjective requirements.

REALISTIC IVUS IMAGE GENERATION IN DIFFERENT INTRALUMINAL PRESSURES

Intravascular ultrasound (IVUS) phantoms are important to calibrate and evaluate many IVUS imaging processing tasks. However, phantom generation is never the primary focus of related works; hence, it cannot be well covered, and is usually based on more than one platform, which may not be accessible to investigators. Therefore, we present a framework for creating representative IVUS phantoms, for different intraluminal pressures, based on the finite element method and Field II. First, a coronary cross-section model is selected. Second, the coronary regions are identified to apply the properties. Third, the corresponding mesh is generated. Fourth, the intraluminal force is applied and the deformation computed. Finally, the speckle noise is incorporated. The framework was tested taking into account IVUS contrast, noise and strains. The outcomes are in line with related studies and expected values. Moreover, the framework toolbox is freely accessible and fully implemented in a single platform. (E-mail: fernando.okara@gmail.com) (c) 2012 World Federation for Ultrasound in Medicine & Biology.

Symmetry insights for design of supercomputer network topologies: roots and weights lattices

We present a family of networks whose local interconnection topologies are generated by the root vectors of a semi-simple complex Lie algebra. Cartan classification theorem of those algebras ensures those families of interconnection topologies to be exhaustive. The global arrangement of the network is defined in terms of integer or half-integer weight lattices. The mesh or torus topologies that network millions of processing cores, such as those in the IBM BlueGene series, are the simplest member of that category. The symmetries of the root systems of an algebra, manifested by their Weyl group, lends great convenience for the design and analysis of hardware architecture, algorithms and programs.