The threat of agroterrorism to Australia: A preliminary assessment

This article provides a preliminary assessment of the agroterrorism threat to Australia. Based on primary research conducted among Australia's biotechnology and agriculture sectors, it examines current threat scenarios and existing vulnerabilities within Australia. It argues that the threat of agroterrorism to Australia is real, and, for prudential reasons, should be taken more seriously by government authorities. The article concludes with a series of broad policy options to mitigate the threat of agroterrorism to Australia.

Improved VDC casting of aluminium alloys through an understanding of the surface properties of the molten metal

Vertical direct chill (VDC) casting of aluminium alloys is a mature process that has evolved over many decades through gradual change to both equipment design and casting practice. Today, air-pressurised, continuous lubrication, hot top mould systems with advanced station automation are selected as the process of choice for producing extrusion billet. Specific sets of operating parameters are employed on these stations for each alloy and size combination to produce optimal billet quality. The designs and parameters are largely derived from past experience and accumulated know-how. Recent experimental work at the University of Queensland has concentrated on understanding the way in which the surface properties of liquid aluminium alloys, e.g., surface tension, wetting angle and oxide skin strength, influence the size and shape of the naturally-stab le meniscus for a given alloy, temperature and atmosphere. The wide range of alloy-and condition-dependent values measured has led to the consideration of how these properties impact the stability of the enforced molten metal meniscus within the hot top mould cavity. The actual shape and position of the enforced meniscus is controlled by parameters such as the upstream conduction distance (UCD) from sub-mould cooling and the molten metal head. The degree of deviation of this actual meniscus from the predicted stable meniscus is considered to be a key driver in surface defect formation. This paper reports on liquid alloy property results and proposes how this knowledge might be used to better design VDC mould systems and casting practices.

Impact of mild acute kidney injury (AKI) on outcome after open repair of aortic aneurysms

Recently, mild AKI has been considered as a risk factor for mortality in different scenarios. We conducted a retrospective analysis of the risk factors for two distinct definitions of AKI after elective repair of aortic aneurysms. Logistic regression was carried out to identify independent risk factors for AKI ( defined as >= 25% or >= 50% increase in baseline SCr within 48 h after surgery, AKI 25% and AKI 50%, respectively) and for mortality. Of 77 patients studied ( mean age 68 +/- 10, 83% male), 57% developed AKI 25% and 33.7% AKI 50%. There were no differences between AKI and control groups regarding comorbidities and diameter of aneurysms. However, AKI patients needed a supra-renal aortic cross-clamping more frequently and were more severely ill. Overall in-hospital mortality was 27.3%, which was markedly higher in those requiring a supra-renal aortic cross-clamping. The risk factors for AKI 25% were suprarenal aortic cross-clamping ( odds ratio 5.51, 95% CI 1.05-36.12, p = 0.04) and duration of operation for AKI 25% ( OR 6.67, 95% CI 2.23-19.9, p < 0.001). For AKI 50%, in addition to those factors, post-operative use of vasoactive drugs remained as an independent factor ( OR 6.13, 95% CI 1.64-22.8, p = 0.005). The risk factors associated with mortality were need of supra-renal aortic cross-clamping ( OR 9.6, 95% CI 1.37-67.88, p = 0.02), development of AKI 50% ( OR 8.84, 95% CI 1.31-59.39, p = 0.02), baseline GFR lower than 49 mL/min ( OR 17.07, 95% CI 2.00 145.23, p = 0.009), and serum glucose > 118 mg/dL in the post-operative period ( OR 19.99, 95% CI 2.32-172.28, p = 0.006). An increase of at least 50% in baseline SCr is a common event after surgical repair of aortic aneurysms, particularly when a supra-renal aortic cross-clamping is needed. Along with baseline moderate chronic renal failure, AKI is an independent factor contributing to the high mortality found in this scenario.

Intra-bone marrow injection of mesenchymal stem cells improves the femur bone mass of osteoporotic female rats

The effect of intra-bone injection of differentiated rat bone marrow mesenchymal stem cells (BMMSCs) into the femur of osteoporotic female rats was studied. Osteoporosis was induced in Wistar female rats by bilateral ovariectomy. Then, 0.75 million BMMSCs isolated from healthy rats were injected into the femurs of osteoporotic rats. Histomorphometric analysis and histology clearly revealed improvements in the treated group as compared to untreated group. In 2 months, the femurs of treated rats, unlike untreated rats, showed trabecular bone percentage almost similar to the femurs from control healthy rats. To confirm the origin of newly formed bone, the experiment was repeated with BMMSCs isolated from green fluorescent protein transgenic rats. Confocal microscopy demonstrated green fluorescent protein-positive cells at the surface of trabecular bone of the treated rats. We investigated in vitro osteogenic differentiation of BMMSCs isolated from osteoporotic rats by studying alkaline phosphatase activity, collagen synthesis, and the ability to form mineralized nodules. Osteoporotic BMMSCs showed less differentiation capabilities as compared to those isolated from healthy rats. The results clearly demonstrated the importance of BMMSCs in osteoporosis and that the disease can be treated by injection of BMMSCs.

Molecular adjuvant effects of a conformationally biased agonist elf human C5a anaphylatoxin

A conformationally biased decapeptide agonist of human C5a anaphylatoxin (YSFKPMPLaR) was used as a molecular adjuvant in stimulating Ab responses against peptide epitopes derived from human MUC1 glycoprotein and the human mu and kappa opioid receptors. C57BL6 mice were immunized with the MUC1 epitope (YKQGGFLGL); the C5a agonist (YSFKPMPLaR); YSFKPMPLaR and YKQGGFLGL together, but unconjugated; a C5a-active, MUC1 epitope construct (YKQGGFLGLYSFKPMPLaR); and a C5a-inactive, reversed moiety construct (YSFKPMPLaRYKQGGFLGL). High Ab titers specific for the MUC1 epitope were observed Only in mice immunized with the C5a-active epitope construct. Similar results were obtained in BALB/c mice immunized with the C5a-active, MUC1 epitope construct, Abs from the sera of the C57BL6 mice were predominately of the IgG2a, IgC2b, and IgM isotypes and were reactive against human recombinant MUC1 and MUC1 expressed by the Panc-1 M1F.15 pancreatic cell line, When compared with the corresponding KLH-epitope conjugates in C57BL6 mice, the epitope-C5a agonist constructs produced titers of specific IgG Abs of isotypes distinct from those generated by the keyhole limpet hemocyanin-epitope conjugates, Rabbits immunized with a mu opioid receptor epitope-C5a agonist construct (GDLSDPCGNRTNLGGRDSLYSFKPMPLaR) or a kappa opioid receptor epitope-C5a agonist construct (FPGWAEPDSNGSEDAQLYSFKPMPLaR) generated high titer, epitope-specific Ab responses, Ab titers generated in response to the opioid epitope-C5a agonist constructs were comparable to those generated by the opioid KLH-epitope conjugates, The results of this study are discussed in terms of possible mechanisms by which the conformationally biased C5a agonist serves as a molecular adjuvant.

Is PHEEM a multi-dimensional instrument? An international perspective

Aim: To look at the characteristics of Postgraduate Hospital Educational Environment Measure (PHEEM) using data from the UK, Brazil, Chile and the Netherlands, and to examine the reliability and characteristics of PHEEM, especially how the three PHEEM subscales fitted with factors derived statistically from the data sets. Methods: Statistical analysis of PHEEM scores from 1563 sets of data, using reliability analysis, exploratory factor analysis and correlations of factors derived with the three defined PHEEM subscales. Results: PHEEM was very reliable with an overall Cronbach`s alpha of 0.928. Three factors were derived by exploratory factor analysis. Factor One correlated most strongly with the teaching subscale (R=0.802), Factor Two correlated most strongly with the role autonomy subscale (R=0.623) and Factor Three correlated most strongly with the social support subscale (R=0.538). Conclusions: PHEEM is a multi-dimensional instrument. Overall, it is very reliable. There is a good fit of the three defined subscales, derived by qualitative methods, with the three principal factors derived from the data by exploratory factor analysis.

Comparison of palmtop-computer-assisted brief cognitive-behavioral treatment to cognitive-behavioral treatment for panic disorder

In the present study, the authors sought to determine whether the efficiency and cost-effectiveness of cognitive-behavioral treatment (CBT) for panic disorder could be improved by adjunctive computer-assisted therapy. Eighteen participants who met Diagnostic and Statistical Manual of Mental Disorders (3rd ed., revised; American Psychiatric Association, 1987) criteria for panic disorder were randomly assigned to a 12-session CBT (CBT12) condition (D. H. Barlow & M. G. Craske, 1989) or to a 4-session computer-assisted CBT (CBT4-CA) condition. Palmtop computers, with a program developed to incorporate basic principles of CBT, were used by CBT4-CA clients whenever they felt anxious or wanted to practice the therapy techniques and were used by all participants as a momentary assessment tool. CBT4-CA clients carried the computer at all times and continued to use it for 8 weeks after termination of therapy. Analyses of clinically significant change showed superiority of CBT12 at posttest on some measures; however, there were no differences at follow-up.

Biologically active conformer of the effector region of human C5a and modulatory effects of N-terminal receptor binding determinants on activity

A conformationally biased decapeptide agonist of human C5a (C5a(65-74)Y65,F67,P69,P71,D-Ala73 or YSFKPMPLaR) was used as a functional probe of the C5a receptor (C5aR) in order to understand the conformational features in the C-terminal effector region of C5a that are important for C5aR binding and signal transduction. YSFKPMPLaR was a potent, full agonist of C5a, but at higher concentrations had a superefficacious effect compared to the natural factor. The maximal efficacy of this analogue was 216 +/- 56% that of C5a in stimulating the release of beta-glucuronidase from human neutrophils. C5aR activation and binding curves both occurred in the same concentration range with YSFKPMPLaR, characteristics not observed with natural C5a or more conformationally flexible C-terminal agonists. YSFKPMPLaR was then used as a C-terminal effector template onto which was synthesized various C5aR binding determinants from the N-terminal core domain of the natural factor. In general, the presence of N-terminal binding determinants had little effect on either potency or binding affinity when the C-terminal effector region was presented to the C5aR in this biologically active conformation. However, one peptide, C5a(12-20)-Ahx-YSFKPMPLaR, expressed a 100-fold increase in affinity for the neutrophil C5aR and a 6-fold increase in potency relative to YSFKPMPLaR. These analyses showed that the peptides used in this study have up to 25% of the potency of C5a in human fetal artery and up to 5% of the activity of C5a in the PMN enzyme release assay.

Bone mineral apparent density in juvenile dermatomyositis: the role of lean body mass and glucocorticoid use

Objective: To analyse bone mineral density (BMD) in juvenile dermatomyositis (JDM) and its possible association with body composition, disease activity, duration of disease, glucocorticoid (GC) use, and biochemical bone parameters, including osteoprotegerin (OPG) and receptor activator of nuclear factor B (RANKL). Methods: Twenty girls with JDM and 20 controls matched for gender and age were selected. Body composition and BMD were analysed by dual-energy X-ray absorptiometry (DXA) and bone mineral apparent density (BMAD) was calculated. Duration of disease, cumulative GC, and GC pulse therapy use were determined from medical records. Disease activity and muscle strength were measured by the Disease Activity Score (DAS), the Childhood Myositis Assessment Scale (CMAS), and the Manual Muscle Test (MMT). Inflammatory and bone metabolism parameters were also analysed. OPG and RANKL were measured in patients and controls using an enzyme-linked immunosorbent assay (ELISA). Results: A lower BMAD in the femoral neck (p< 0.001), total femur (p< 0.001), and whole body (p=0.005) was observed in JDM patients compared to controls. Body composition analysis showed a lower lean mass in JDM compared to controls (p=0.015), but no difference was observed with regard to fat mass. A trend of lower serum calcium was observed in JDM (p=0.05), whereas all other parameters analysed, including OPG and RANKL, were similar. Multiple linear regression analysis revealed that, in JDM, lean mass (p< 0.01) and GC pulse therapy use (p< 0.05) were independent factors for BMAD in the hip region. Conclusions: This study has identified low lean mass and GC pulse therapy use as the major factors for low hip BMAD in JDM patients.

Osteoprotegerin/RANKL system imbalance in active polyarticularonset juvenile idiopathic arthritis: a bone damage biomarker?

Objective: To evaluate the importance of receptor activator of nuclear factor kappa B (RANK)/receptor activator of nuclear factor kappa B ligand (RANKL)/osteoprotegerin (OPG) modulation in active polyarticular juvenile idiopathic arthritis (pJIA) patients with and without bone erosions. Methods: Thirty female patients (mean age 11.07 +/- 3.77 years, range 4-17 years) with active pJIA and 30 healthy gender-and age-matched controls were consecutively selected for this study. All involved articulations were assessed by X-ray and examined for the presence of bone erosions. The serum levels of RANKL and OPG were measured using an enzyme-linked immunosorbent assay (ELISA). Results: Patients with active pJIA had higher levels of serum RANKL than controls [2.90 (0.1-37.4) vs. 0.25 (0.1-5.7) pg/mL, p=0.007] and a lower OPG/RANKL ratio [21.25 (1.8-897.6) vs. 347.5 (9-947.8), p=0.005]. However, levels of OPG were comparable in both groups [55.24 (28.34-89.76) vs. 64.42 (30.68-111.28) pg/mL, p=0.255]. Higher levels of serum RANKL and a lower OPG/RANKL ratio were also observed in active pJIA patients with bone erosions compared to controls [3.49 (0.1-37.4) vs. 0.25 (0.1-5.7) pg/mL, p=0.0115 and 14.3 (1.8-897.6) vs. 347.5 (9-947.8), p=0.016]. However, RANKL levels and OPG/RANKL ratio were similar in pJIA patients without bone erosion and controls [1.75 (0.1-10.9) vs. 0.25 (0.1-5.7) pg/mL, p=0.055 and 29.2 (3.3-756.8) vs. 347.5 (9-947.8), p=0.281]. Conclusion: These data suggest that active pJIA with bone erosions is associated with high serum levels of RANKL and a low OPG/RANKL ratio, indicating that these alterations may reflect bone damage in this disease.

Structure of TcpG, the DsbA protein folding catalyst from Vibrio cholerae

The efficient and correct folding of bacterial disulfide bonded proteins in vivo is dependent upon a class of periplasmic oxidoreductase proteins called DsbA, after the Escherichia coli enzyme. In the pathogenic bacterium Vibrio cholerae, the DsbA homolog (TcpG) is responsible for the folding, maturation and secretion of virulence factors. Mutants in which the tcpg gene has been inactivated are avirulent; they no longer produce functional colonisation pill and they no longer secrete cholera toxin. TcpG is thus a suitable target for inhibitors that could counteract the virulence of this organism, thereby preventing the symptoms of cholera. The crystal structure of oxidized TcpG (refined at a resolution of 2.1 Angstrom) serves as a starting point for the rational design of such inhibitors. As expected, TcpG has the same fold as E. coli DsbA, with which it shares similar to 40% sequence identity. Ln addition, the characteristic surface features of DsbA are present in TcpG, supporting the notion that these features play a functional role. While the overall architecture of TcpG and DsbA is similar and the surface features are retained in TcpG, there are significant differences. For example, the kinked active site helix results from a three-residue loop in DsbA, but is caused by a proline in TcpG (making TcpG more similar to thioredoxin in this respect). Furthermore, the proposed peptide binding groove of TcpG is substantially shortened compared with that of DsbA due to a six-residue deletion. Also, the hydrophobic pocket of TcpG is more shallow and the acidic patch is much less extensive than that of E. coli DsbA. The identification of the structural and surface features that are retained or are divergent in TcpG provides a useful assessment of their functional importance in these protein folding catalysts and is an important prerequisite for the design of TcpG inhibitors. (C) 1997 Academic Press Limited.