A process for mining science & technology documents databases, illustrated for the case of "knowledge discovery and data mining"

This paper presents a process of mining research & development abstract databases to profile current status and to project potential developments for target technologies, The process is called "technology opportunities analysis." This article steps through the process using a sample data set of abstracts from the INSPEC database on the topic o "knowledge discovery and data mining." The paper offers a set of specific indicators suitable for mining such databases to understand innovation prospects. In illustrating the uses of such indicators, it offers some insights into the status of knowledge discovery research*.

State of Iowa Appropriations Process, 2013

State of Iowa Appropriations Process. Flow chart of the process.

Budget Process in Iowa, September 18, 2008

Budget Process: The Governor and the State Legislature appropriate the state resources after the revenue receipts are estimated by the Revenue Estimating Conference.

The construction process of pedagogical knowledge among nursing professors

Didactic knowledge about contents is constructed through an idiosyncratic synthesis between knowledge about the subject area, students' general pedagogical knowledge and the teacher's biography. This study aimed to understand the construction process and the sources of Pedagogical Content Knowledge, as well as to analyze its manifestations and variations in interactive teaching by teachers whom the students considered competent. Data collection involved teachers from an undergraduate nursing program in the South of Brazil, through non-participant observation and semistructured interviews. Data analysis was submitted to the constant comparison method. The results disclose the need for initial education to cover pedagogical aspects for nurses; to assume permanent education as fundamental in view of the complexity of contents and teaching; to use mentoring/monitoring and the value learning with experienced teachers with a view to the development of quality teaching.

Review of Iowa Department of Human Services Drug Testing Process, December 2008

This report outlines the current drugs testing practices and using these practices for testing requirements.

Égalitaires ou discriminatoires: considérations sur l'exercice de la liberté religieuse en contexte carcéral

Si historiquement la religion a toujours été intimement liée aux établissements pénitentiaires, elle était jusqu'à récemment synonyme de christianisme. Aujourd'hui, en contexte à la fois sécularisé et pluralisé du point de vue de la religion, l'aumônerie traditionnelle chrétienne se trouve face à de nouveaux enjeux. D'une part, elle est confrontée à la spécialisation des domaines d'activité au sein des prisons et d'autre part, elle doit composer avec des détenus de confession allogène et contribuer, par son action, au respect de l'exercice de leurs droits religieux. Ainsi, on assiste, dans le cadre de l'aumônerie à un double processus. D'un côté, on remarque une universalisation du travail de l'aumônier chrétien qui se doit d'assister l'ensemble des femmes et des hommes incaréré-e-s, quelle que soit leur confession ou religion. D'un autre côté, on constate l'émergence de corps d'intervenants religieux caractérisés par une spécialisation communautaire religieuse ou ethnique, à l'exemple des intervenants musulmans de prison. L'objectif de la présente contribution sera ainsi de décrire les processus à l'oeuvre exprimant tantôt une universalisation ou une particularisation des intervenants religieux et de réfléchir au développement d'une aumônerie d'un type nouveau, pluri-religieuse professionnalisée et professionnalisante. If religion has always historically had close ties to penitentiaries, it was until recently synonymous with Christianity. Nowadays, the religious context in prison has evolved towards secularization and pluralization, meaning that the traditional Christian chaplaincy faces new challenges. On the one hand, it is confronted with the specialization of fields of activity in prison and on the other hand, it must adapt to a growing number of prisoners from various religious origins and contribute to the respect of their religious rights. Thus, we witness the development of a duel process in prison chaplaincy. Firstly, the universalization of the role of the Christian chaplain who must assist all incarcerated men and women, regardless of their religion or confession. Secondly, the emergence of non Christian visiting minister with a linguistic, ethnic or religious specialization, like for instance Muslim representative intervening the Muslim prisoners. The aim of this contribution is to describe this duel process and discuss the legal and sociological implications.

Title IIIB Legal Assistance Activity Report for SFY 2013, December 30, 2013

This report is prepared from data submitted by the Title IIIB providers and Area Agencies on Aging.

Usefulness of postmortem biochemistry in forensic pathology: illustrative case reports.

The aim of this work is to present some practical, postmortem biochemistry applications to illustrate the usefulness of this discipline and reassert the importance of carrying out biochemical investigations as an integral part of the autopsy process. Five case reports are presented pertaining to diabetic ketoacidosis in an adult who was not known to suffer from diabetes and in presence of multiple psychotropic substances; fatal flecainide intoxication in a poor metabolizer also presenting an impaired renal function; diabetic ketoacidosis showing severe postmortem changes; primary aldosteronism presented with intracranial hemorrhage and hypothermia showing severe postmortem changes. The cases herein presented can be considered representative examples of the importance of postmortem biochemistry investigations, which may provide significant information useful in determining the cause of death in routine forensic casework or contribute to understanding the pathophysiological mechanisms involved in the death process.

Constructability in the Bridge Design Process, HR-320, 1991

In the United States many bridge structures have been designed without consideration for their unique construction problems. Many problems could have been avoided if construction knowledge and experience was utilized in the design process. A systematic process is needed to create and capture construction knowledge for use in the design process. This study was conducted to develop a system to capture construction considerations from field people and incorporate it into a knowledge-base for use by the bridge designers. This report presents the results of this study. As a part of this study a microcomputer-based constructability system has been developed. The system is a user-friendly microcomputer database which codifies construction knowledge, provides easy access to specifications, and provides simple design computation checks for the designer. A structure for the final database was developed and used in the prototype system. A process for collecting, developing and maintaining the database is presented and explained. The study involved a constructability survey, interviews with designers and constructors, and visits to construction sites to collect constuctability concepts. The report describes the development of the constructability system and addresses the future needs for the Iowa Department of Transportation to make the system operational. A user's manual for the system is included along with the report.

Investigation of Two Bridge Alternatives for Low Volume Roads - Phase II Volume 1 of 2 Concept 1: Steel Beam Precast Units, TR-410, 2000

This project continues the research which addresses the numerous bridge problems on the Iowa secondary road system. It is a continuation (Phase 2) of Project HR-382, in which two replacement alternatives (Concept 1: Steel Beam Precast Units and Concept 2: Modification of the Benton County Beam-in-Slab Bridge) were investigated. In previous research for concept 1, a precast unit bridge was developed through laboratory testing. The steel-beam precast unit bridge requires the fabrication of precast double-tee (PCDT) units, each consisting of two steel beams connected by a reinforced concrete deck. The weight of each PCDT unit is minimized by limiting the deck thickness to 4 in., which permits the units to be constructed off-site and then transported to the bridge site. The number of units required is a function of the width of bridge desired. Once the PCDT units are connected, a cast-in-place reinforced concrete deck is cast over the PCDT units and the bridge railing attached. Since the steel beam PCDT unit bridge design is intended primarily for use on low-volume roads, used steel beams can be utilized for a significant cost savings. In previous research for concept 2, an alternate shear connector (ASC) was developed and subjected to static loading. In this investigation, the ASC was subjected to cyclic loading in both pushout specimens and composite beam tests. Based on these tests, the fatigue strength of the ASC was determined to be significantly greater than that required in typical low volume road single span bridges. Based upon the construction and service load testing, the steel-beam precast unit bridge was successfully shown to be a viable low volume road bridge alternative. The construction process utilized standard methods resulting in a simple system that can be completed with a limited staff. Results from the service load tests indicated adequate strength for all legal loads. An inspection of the bridge one year after its construction revealed no change in the bridge's performance. Each of the systems previously described are relatively easy to construct. Use of the ASC rather than the welded studs significantly simplified the work, equipment, and materials required to develop composite action between the steel beams and the concrete deck.

Development of a New Process for Determining Design Year Traffic Demands, TR-528, 2007

Researchers should continuously ask how to improve the models we rely on to make financial decisions in terms of the planning, design, construction, and maintenance of roadways. This project presents an alternative tool that will supplement local decision making but maintain a full appreciation of the complexity and sophistication of today’s regional model and local traffic impact study methodologies. This alternative method is tailored to the desires of local agencies, which requested a better, faster, and easier way to evaluate land uses and their impact on future traffic demands at the sub-area or project corridor levels. A particular emphasis was placed on scenario planning for currently undeveloped areas. The scenario planning tool was developed using actual land use and roadway information for the communities of Johnston and West Des Moines, Iowa. Both communities used the output from this process to make regular decisions regarding infrastructure investment, design, and land use planning. The City of Johnston case study included forecasting future traffic for the western portion of the city within a 2,600-acre area, which included 42 intersections. The City of West Des Moines case study included forecasting future traffic for the city’s western growth area covering over 30,000 acres and 331 intersections. Both studies included forecasting a.m. and p.m. peak-hour traffic volumes based upon a variety of different land use scenarios. The tool developed took goegraphic information system (GIS)-based parcel and roadway information, converted the data into a graphical spreadsheet tool, allowed the user to conduct trip generation, distribution, and assignment, and then to automatically convert the data into a Synchro roadway network which allows for capacity analysis and visualization. The operational delay outputs were converted back into a GIS thematic format for contrast and further scenario planning. This project has laid the groundwork for improving both planning and civil transportation decision making at the sub-regional, super-project level.

Optimal dividend strategies for a compound Poisson risk process under transaction costs and power utility

We characterize the value function of maximizing the total discounted utility of dividend payments for a compound Poisson insurance risk model when strictly positive transaction costs are included, leading to an impulse control problem. We illustrate that well known simple strategies can be optimal in the case of exponential claim amounts. Finally we develop a numerical procedure to deal with general claim amount distributions.

Group selection and kin selection: two concepts but one process.

In a recent paper, Traulsen and Nowak use a multilevel selection model to show that cooperation can be favored by group selection in finite populations [Traulsen A, Nowak M (2006) Proc Natl Acad Sci USA 103:10952-10955]. The authors challenge the view that kin selection may be an appropriate interpretation of their results and state that group selection is a distinctive process "that permeates evolutionary processes from the emergence of the first cells to eusociality and the economics of nations." In this paper, we start by addressing Traulsen and Nowak's challenge and demonstrate that all their results can be obtained by an application of kin selection theory. We then extend Traulsen and Nowak's model to life history conditions that have been previously studied. This allows us to highlight the differences and similarities between Traulsen and Nowak's model and typical kin selection models and also to broaden the scope of their results. Our retrospective analyses of Traulsen and Nowak's model illustrate that it is possible to convert group selection models to kin selection models without disturbing the mathematics describing the net effect of selection on cooperation.