Conformal invariants

This master thesis investigates the moduli of families of curves and the capacities of the Gr¨otzsch and Teichm¨uller rings, which are applied in the main parts of this master thesis. The extremal properties of these rings are discussed in connection with the spherical symmetrization. Applications are given to the study of distortion of quasiconformal maps in the euclidean n-dimensional space.

Elemental analysis of wood materials by external millibeam thick target PIXE

PIXE (Particle Induce X-ray Emission spectrometry) was used for analysing stem bark and stem wood of Scots pine, Norway spruce and Silver birch. Thick samples were irradiated, in laboratory atmosphere, with 3 MeV protons and the beam current was measured indirectly using a photo multiplicator (PM) tube. Both point scans and bulk analyses were performed with the 1 mm diameter proton beam. In bulk analyses, whole bark and sectors of discs of the stem wood were dry ashed at 550 ˚C. The ashes were homogenised by shaking and prepared to target pellets for PIXE analyses. This procedure generated representative samples to be analysed, but the enrichment also enabled quantification of some additional trace elements. The ash contents obtained as a product of the sample preparation procedure also showed to be of great importance in the evaluation of results in environmental studies. Spot scans from the pith of pine wood outwards, showed clearly highest concentrations of manganese, calcium and zinc in the first spot irradiated, or 2-3 times higher than in the surrounding wood. For stem wood from the crown part of a pine this higher concentration level was found in the first four spots/mms, including the pith and the two following growth rings. Zinc showed increasing concentrations outwards in sapwood of the pine stem, with the over-all lowest concentrations in the inner half of the sapwood. This could indicate emigration of this element from sapwood being under transformation to heartwood. Point scans across sapwood of pine and spruce showed more distinct variations in concentrations relative to hearth wood. Higher concentrations of e.g. zinc, calcium and manganese were found in earlywood than in denser latewood. Very high concentrations of iron and copper were also seen for some earlywood increments. The ash content of stem bark is up to and order higher than for the stem wood. However, when the elemental concentration in ashes of bark and wood of the same disc were compared, these are very similar – this when trees are growing at spots with no anthropogenic contamination from the atmosphere. The largest difference was obtained for calcium which appeared at two times high concentrations in ashes of bark than in ashes of the wood (ratio of 2). Pine bark is often used in monitoring of atmospheric pollution, where concentrations in bark samples are compared. Here an alternative approach is suggested: Bark and the underlying stem wood of a pine trees are dry ashed and analysed. The elemental concentration in the bark ash is then compared to the concentration of the same element in the wood ash. Comparing bark to wood includes a normalisation for the varying availability of an element from the soil at different sites. When this comparison is done for the ashes of the materials, a normalisation is also obtained for the general and locally different enrichment of inorganic elements from wood to bark. Already a ratio >2 between the concentration in the bark ash and the concentration in the wood ash could indicate atmospheric pollution. For monitoring where bark is used, this way of “inwards” comparison is suggested - instead of comparing to results from analyses of bark from other trees (read reference areas), growing at sites with different soil and, locally, different climate conditions. This approach also enables evaluation of atmospheric pollution from sampling of only relative few individual trees –preferable during forest felling.

Identification and characterization of a Hydrangea ringspot virus isolate infecting hydrangea in São Paulo State

Hydrangea plants showing leaves with chlorotic and necrotic rings from Arujá Municipality, São Paulo State, were analyzed for the identification of the viral species. Elongated filamentous particles of 490 nm were visualized under transmission electron microscope. Oligonucleotides for Hydrangea ringspot virus (HdRSV), a potexvirus commonly found in Europe and in the United States, were tested using total RNA from hydrangea plants, amplifying two fragments, one around 550 and another one of 250 nucleotides. Nucleotide identity with HdRSV (accession number AJ 707100.1) was 96% and 88% for the longest and shortest fragment, respectively, indicating the presence of this virus. To evaluate its dissemination in the matrices of hydrangea used in the commercial production, 17 samples were collected in the region of Arujá, and eight were infected by HdRSV. For the analyzed viral replicase portion, the isolates from the varieties 'Azul LZR', 'Rosita', 'Renat Blue' and 'Vermelho Comum' did not differ in their amino acid sequences from isolates with sequences deposited in the GenBank (accession numbers AY 707100 and NC_006943). The isolates from 'Azul Rendado' and "Rosa Japonesa' showed few differences but were related to the remaining isolates. An antiserum was obtained for HdRSV and can be efficiently used to detect such virus in hydrangea and Primula malacoides, another ornamental plant also infected by HdRSV.

DENDROCLIMATOLOGICAL RECONSTRUCTION OF SPRING-SUMMER PRECIPITATION FOR FAZENDA RIO GRANDE, PR, WITH SAMPLES OF Araucaria angustifolia (Bertol.) Kuntze

ABSTRACT Samples of Araucaria angustifolia were collected at Fazenda Rio Grande, Paraná, Brazil (25°39'S 49 18'O) in January 2011. The 32 samples from 8 trees were subjected to treatments following dendrochronological techniques. The cores were measured and dated using optical and computational methodology, and then standardized to obtain a growth-ring time series, which considers the 1907-2009 time range and represents Fazenda Rio Grande. Tree-ring indices were analyzed and correlated to temperature and precipitation averages from the 1961-2009 range. This procedure aimed to study and understand the influence of the local climate on the plant growth and if this influence can be quantified. A. angustifolia trees produce visible annual growth rings, and their earlywood and latewood are clearly defined. The present study shows that A. angustifolia is sensitive to climate variables (e.g., low temperatures in wintertime tend to stop the growth rate). The correlation between tree rings and monthly precipitation series showed a common trend, making it possible to estimate the seasonal rainfall behavior for the entire 1907-2009 range.

Start-up of anaerobic reactors for slaughterhouse wastewater treatment

This study aimed to evaluate the start-up of a horizontal anaerobic fixed bed reactor (HAFBR) followed by an upflow anaerobic sludge blanket (UASB) for the slaughterhouse wastewater treatment. HAFBR was filled with bamboo rings and had 1.2 m in length, 0.10 m in diameter and volume of 7.5 L. The UASB had the volume of 15 L. The HAFBR and UASB operated at organic loading rate and hydraulic retention time average of 8.46 and 3.77 kg m-3 d-1 of COD and 0.53 and 0.98 days, respectively. During 150 days of monitoring system it was found pH 6.8, relatively high values of bicarbonate alkalinity (> 1000 mg L-1) and reduced values of volatile acids (70 to 150 mg L-1), which afforded average removal efficiencies of COD total and total suspended solids of the order of 31 and 23% in HAFBR and 79% and 63% in UASB. It can be concluded that the generation and consumption of bicarbonate alkalinity and total volatile acids, thereby maintaining the pH during the study indicated stable operation of the reactors. The COD removal in the reactors was satisfactory especially when it considers that the assessment was conducted in a period of adaptation of organisms to the effluent and also the high organic load applied during this period.

High-speed solid-rotor induction machine – calculation program

The aim of this thesis is to utilize the technology developed at LUT and to provide an easy tool for high-speed solid-rotor induction machine preliminary design. Computer aided design tool MathCAD has been chosen as the environment for realizing the calculation program. Four versions of the design program have been made depending on the motor rotor type. The first rotor type is an axially slitted solid-rotor with steel end rings. The next one is an axially slitted solid-rotor with copper end rings. The third machine type is a solid rotor with deep, rectangular copper bars and end rings (squirrel cage). And the last one is a solid-rotor with round copper bars and end rings (squirrel cage). Each type of rotor has its own specialties but a general thread of design is common. This paper follows the structure of the calculating program and explains some features and formulas. The attention is concentrated on the difference between laminated and solid-rotor machine design principles. There is no deep analysis of the calculation ways are presented. References for all solution methods appearing during the design procedure are given for more detailed studying. This thesis pays respect to the latest innovations in solid-rotor machines theory. Rotor ends’ analytical calculation follows the latest knowledge in this field. Correction factor for adjusting the rotor impedance is implemented. The purpose of the created design program is to calculate the preliminary dimensions of the machine according to initial data. Obtained results are not recommended for exact machine development. Further more detailed design should be done in a finite element method application. Hence, this thesis is a practical tool for the prior evaluating of the high-speed machine with different solid-rotor types parameters.

Crystal-associated cholangiopathy in sheep grazing Brachiaria decumbens containing the saponin protodioscin

An outbreak of hepatogenous photosensitization is reported in a flock of 28 sheep grazing Brachiaria decumbens in Mato Grosso do Sul State, Central-Western Brazil. Seven lambs and an adult sheep were affected and 6 of them died. Two surviving affected lambs and one lamb without clinical signs had increased serum values of gamma glutamyltransferase, bilirubin, and cholesterol. In two adult unaffected sheep those parameters were within normal values. An adult sheep submitted to necropsy presented moderate body condition, unilateral corneal opacity, drying of the muzzle, moderate jaundice, increased lobular pattern of the liver, and a distended gallbladder. Histological lesions were epithelial degeneration, necrosis, and hyperplasia of small bile ducts. Mild amounts of foamy macrophages were observed, mainly in the centroacinar zone. Diffuse swelling and vacuolation were observed in hepatocytes. Crystal negative images were found within bile ducts, foamy macrophages, and the lumen of some renal tubules. The heart showed multifocal areas of degeneration and necrosis of the muscle fibers. Pasture samples (Brachiaria decumbens) contained 2.36% of protodioscin. No Pithomyces chartarum spores were found in the pasture. Samples from a similar neighboring B. decumbens pasture grazed by cattle without photosensitization contained 1.63% of protodioscin isomers. Outbreaks of photosensitization caused by Brachiaria spp. are common in cattle in the Brazilian Cerrado (savanna) with about 51 million hectares of Brachiaria spp pastures. Sheep farming has been recently developed in this region, and the number of sheep is increasing significantly. Because sheep are more susceptible than cattle to lithogenic saponins, poisoning by Brachiaria should be an important limiting factor for the sheep industry.

Outbreaks of rhinofacial and rhinopharyngeal zygomycosis in sheep in Paraíba, northeastern Brazil

Two outbreaks of zigomycosis with rhinofacial and two other with rhinopharyngeal lesions involving fungi with filamentous coaenocytic hyphae characteristic of entomoph-thoramycetous fungi are reported in the state of Paraíba, northeastern Brazil. One outbreak of rhinofacial zygomycosis occurred during the rainy season affecting 5 sheep. Another outbreak of the clinical form affected one out of 40 sheep during the dry season. Common clinical signs of the rhinofacial infection were bilateral serosanguineous nasal discharge with swelling of nostrils, upper lip, and the skin of the face. At necropsy the nasal mucosa showed dark brownish ulcerated areas which extended from the mucocutaneous region to 10cm inside the nasal vestibule. The mucosa of the hard palate was also ulcerated. The cutting surface of nostrils and palate showed a brownish or red spongeous tissue of friable consistency. One outbreak of rhinopharyngitis took place on an irrigated coconut farm; 7 out of 60 adult sheep were affected. Another outbreak affected a sheep in a flock of 80 during the dry season. Clinical signs as noisy respiration and dyspnoea due to mechanical blockage of the nasal cavities, swelling of the nostrils, and serosanguineous nasal discharge were observed. Six out of 8 sheep in this group showed exophthalmia, keratitis and unilateral corneal ulceration of the eye. The sheep either died of their infection or were euthanized after a clinical course of 7-30 days. At necropsy there was a dense yellow exudate in the nasopharyngeal area affecting the ethmoidal region, turbinate bones, paranasal sinuses, hard and soft palates, orbital cavity, pharynges, regional muscles and lymph nodes. Histopathologically both forms of the disease showed multifocal granulomas with an eosinophilic necrotic reaction (Splendore-Hoeppli phenomenon) containing ribbon-type coenocytic hyphae with 7-30mum in diameter similar to hyphae of zygomycetous fungi, possibly Conidiobolus spp. Outbreaks of both forms of mycotic rhinitis are common in northeastern Brazil and in other regions of the country.