The Liquefaction and Displacement of Highly Saturated Sand under Water Pressure Oscillation

In order to investigate the characteristics of water wave induced liquefaction in highly saturated sand in vertical direction, a one-dimensional model of highly saturated sand to water pressure oscillation is presented based oil the two-phase continuous media theory. The development of the effective stresses and the liquefaction thickness are analyzed. It is shown that water pressure oscillating loading affects liquefaction severely and the developing rate of liquefaction increases with the decreasing of the sand strength or the increasing of the loading strength. It is shown also that there is obvious phase lag in the sand Column. If the sand permeability is non-uniform, the pore pressure and the strain rise sharply at which the smallest permeability occurs. This solution may explain Why the fracture occurs in the sand column in some conditions.

Parameters Inversion of Fluid-Saturated Porous Media Based on Neural Networks

The multi-layers feedforward neural network is used for inversion of material constants of fluid-saturated porous media. The direct analysis of fluid-saturated porous media is carried out with the boundary element method. The dynamic displacement responses obtained from direct analysis for prescribed material parameters constitute the sample sets training neural network. By virtue of the effective L-M training algorithm and the Tikhonov regularization method as well as the GCV method for an appropriate selection of regularization parameter, the inverse mapping from dynamic displacement responses to material constants is performed. Numerical examples demonstrate the validity of the neural network method.

Investigation of the Mechanical Properties of Thin Films by Nanoindentation, Considering the Effects of Thickness and Different Coating-Substrate Combinations

In order to further investigate nanoindentation data of film-substrate systems and to learn more about the mechanical properties of nanometer film-substrate systems, two kinds of films on different substrate systems have been tested with a systematic variation in film thickness and substrate characteristics. The two kinds of films are aluminum and tungsten, which have been sputtered on to glass and silicon substrates, respectively. Indentation experiments were performed with a Nano Indent XP II with indenter displacements typically about two times the nominal film thicknesses. The resulting data are analyzed in terms of load-displacement curves and various comparative parameters, such as hardness, Young's modulus, unloading stiffness and elastic recovery. Hardness and Young's modulus are investigated when the substrate effects are considered. The results show how the composite hardness and Young's modulus are different for different substrates, different films and different film thicknesses. An assumption of constant Young's modulus is used for the film-substrate system, in which the film and substrate have similar Young's moduli. Composite hardness obtained by the Joslin and Oliver method is compared with the directly measured hardness obtained by the Oliver and Pharr method.

Kramers Escape Rate in Nonlinear Diffusive Media

In this paper, we study nonlinear Kramers problem by investigating overdamped systems ruled by the one-dimensional nonlinear Fokker-Planck equation. We obtain an analytic expression for the Kramers escape rate under quasistationary conditions by employing

State Vector: A New Approach to Prediction of the Failure of Brittle Heterogeneous Media and Large Earthquakes

The concept of state vector stems from statistical physics, where it is usually used to describe activity patterns of a physical field in its manner of coarsegrain. In this paper, we propose an approach by which the state vector was applied to describe quantitatively the damage evolution of the brittle heterogeneous systems, and some interesting results are presented, i.e., prior to the macro-fracture of rock specimens and occurrence of a strong earthquake, evolutions of the four relevant scalars time series derived from the state vectors changed anomalously. As retrospective studies, some prominent large earthquakes occurred in the Chinese Mainland (e.g., the M 7.4 Haicheng earthquake on February 4, 1975, and the M 7.8 Tangshan earthquake on July 28, 1976, etc) were investigated. Results show considerable promise that the time-dependent state vectors could serve as a kind of precursor to predict earthquakes.

High resolution cortical bone thickness measurement from clinical CT data.

The distribution of cortical bone in the proximal femur is believed to be a critical component in determining fracture resistance. Current CT technology is limited in its ability to measure cortical thickness, especially in the sub-millimetre range which lies within the point spread function of today's clinical scanners. In this paper, we present a novel technique that is capable of producing unbiased thickness estimates down to 0.3mm. The technique relies on a mathematical model of the anatomy and the imaging system, which is fitted to the data at a large number of sites around the proximal femur, producing around 17,000 independent thickness estimates per specimen. In a series of experiments on 16 cadaveric femurs, estimation errors were measured as -0.01+/-0.58mm (mean+/-1std.dev.) for cortical thicknesses in the range 0.3-4mm. This compares with 0.25+/-0.69mm for simple thresholding and 0.90+/-0.92mm for a variant of the 50% relative threshold method. In the clinically relevant sub-millimetre range, thresholding increasingly fails to detect the cortex at all, whereas the new technique continues to perform well. The many cortical thickness estimates can be displayed as a colour map painted onto the femoral surface. Computation of the surfaces and colour maps is largely automatic, requiring around 15min on a modest laptop computer.

Elastic Waves in a Hybrid Multilayered Piezoelectric Plate

An analytical-numerical method is presented for analyzing dispersion and characteristic surface of waves in a hybrid multilayered piezoelectric plate. In this method, the multilayered piezoelectric plate is divided into a number of layered elements with three-nodal-lines in the wall thickness, the coupling between the elastic field and the electric field is considered in each element. The associated frequency dispersion equation is developed and the phase velocity and slowness, as well as the group velocity and slowness are established in terms of the Rayleigh quotient. Six characteristic wave surfaces are introduced to visualize the effects of anisotropy and piezoelectricity on wave propagation. Examples provide a full understanding for the complex phenomena of elastic waves in hybrid multilayered piezoelectric media.

Influencia de diferentes períodos de destete sobre la ganancia media en conejos de engorde procedentes de conejas primiparas

El presente trabajo se realizó con el objetivo de estudiar el efecto del destete a los 15, 30 y 45 días, sobre la ganancia media en conejos con alimento concentrado comercial tipo único, y ad-libitum, hasta los 75 días de vida, procedentes de hembras primiparas. Para la evaluación estadística se empleó un diseño completamente aleatorio (DCA) con cuatro repeticiones por periodos de destete. Cada unidad experimental o repetición correspondió a una camada, en las que se registraron loe pesos vivos cada 15 días y el número de crías vivas por camada. Esta última característica con el objetivo de corregir las ganancias a un tamaño de camada uniforme de existir regresión lineal significativa. Cada camada se alojó en una jaula de 0.49 m2. En el análisis de varianza (ANDEVA) dé la ganancia media por gazapo al cabo de 30 días, se observaron diferencias significativas entre periodos de destete resultando un promedio de 0,344 kg y 0.510 kg para destetes de 15 días y 30 días respectivamente. En el Análisis de varianza de la ganancia media por gazapo al cabo de 45, 60 y 75 días, se observaron diferencias no significativas al 10%. Resultado que se corroboró con el procedimiento de comparación de medias de Duncan. Las ganancias medias por gazapo obtenido en las camadas a los 75 días de vida resultó de 1.676 kg, 1. 939 kg y 1.846 kg para los destete de 15, 30 y 45 días respectivamente. Durante. El ensayo fue evidente el estrés post destete, acentuándose más en las camadas destetadas a los 15 días. Analizando el efecto de los períodos de destete sobre la ganancia media en conejos a los 45, 60 y 75 días de vida. Se determinó que dicho efecto no es significativo debido al rango de ganancia media mostrado por las variables en estudio y que estas no fueron afectadas por la covariable número de conejos por camada.

Influence of the thickness ratio of air layer to liquid layer on the onset of Benard-Marangoni convection

An experimental investigation of the onset of Benard-Marangoni convection has been performed in a liquid layer of rectangular configuration. The critical temperature difference was measured via the detections of both temperature field pattern (IR-imaging) on the free surface and fluid convection (PIV) in the liquid layer. The critical temperature difference or the critical Marangoni number was given. The experiments were performed for a fixed depth of air layer and a changeable depth of the liquid layer, and then the influence of the thickness ratio of the air layer to liquid layer on the Marangoni instability was studied.

Catastrophic Rupture Induced Damage Coalescence in Heterogeneous Brittle Media

In heterogeneous brittle media, the evolution of damage is strongly influenced by the multiscale coupling effect. To better understand this effect, we perform a detailed investigation of the damage evolution, with particular attention focused on the catastrophe transition. We use an adaptive multiscale finite-element model (MFEM) to simulate the damage evolution and the catastrophic failure of heterogeneous brittle media. Both plane stress and plane strain cases are investigated for a heterogeneous medium whose initial shear strength follows the Weibull distribution. Damage is induced through the application of the Coulomb failure criterion to each element, and the element mesh is refined where the failure criterion is met. We found that as damage accumulates, there is a stronger and stronger nonlinear increase in stress and the stress redistribution distance. The coupling of the dynamic stress redistribution and the heterogeneity at different scales result in an inverse cascade of damage cluster size, which represents rapid coalescence of damage at the catastrophe transition.

The relationship of SIF between plate and plane fracture problems and the effect of the plate thickness on SIF

In the present paper, it is shown that the zero series eigenfunctions of Reissner plate cracks/notches fracture problems are analogous to the eigenfunctions of anti-plane and in-plane. The singularity in the double series expression of plate problems only arises in zero series parts. In view of the relationship with eigen-values of anti-plane and in-plane problem, the solution of eigen-values for Reissner plates consists of two parts: anti-plane problem and in-plane problem. As a result the corresponding eigen-values or the corresponding eigen-value solving programs with respect to the anti-plane and in-plane problems can be employed and many aggressive SIF computed methods of plane problems can be employed in the plate. Based on those, the approximate relationship of SIFs between the plate and the plane fracture problems is figured out, and the effect relationship of the plate thickness on SIF is given.

Long-Range Stress Redistribution Resulting From Damage in Heterogeneous Media

It has been shown in CA simulations and data analysis of earthquakes that declustered or characteristic large earthquakes may occur with long-range stress redistribution. In order to understand long-range stress redistribution, we propose a linear-elastic but heterogeneous-brittle model. The stress redistribution in the heterogeneous-brittle medium implies a longer-range interaction than that in an elastic medium. Therefore, it is surmised that the longer-range stress redistribution resulting from damage in heterogeneous media may be a plausible mechanism governing main shocks.

Comparación de zeranol tixotrópico1% vs zeranol 1% más ivermectina 3.15%, y sus efectos sobre la ganancia media diaria y carga parasitaria en terneros de la raza Reyna, finca Santa Rosa, Managua

El propósito del presente trabajo fue comparar el efecto de Zeranol tixotrópico 1% y Zeranol + ivermectina 3.15% sobre la ganancia de peso y carga parasitaria en terneros de la raza Reyna. Se utilizaron 21 terneros con peso de 86.3 ± 0.8 kg y edad de 12.24 ± 2.0 m, agrupados en un diseño completamente al azar (DCA), distribuidos en tres tratamientos T1: Ivermectina, T2: Zeranol tixotrópico 1%, T3: Zeranol + ivermectina 3.15% con 7 repeticiones por tratamiento. Las variables productivas estudiadas fueron: Ganancia media diaria (GMD), Peso final (PF), Ganancia total de peso (GTP); y medidas zoométricas: Perímetro toráxico (PT), Perímetro abdominal (PA), altura a la cruz (AC) y longitud corporal (LC). Los datos fueron analizados por PROC: GLM del paquete estadístico SAS® Ver. 9.1.2. y la comparación de medias por la prueba de Tuckey. Los resultados demuestran que el T1 obtuvo una GMD de 277.95 g, superando a T2 y T3 (222.83g y 265.53g, respectivamente); el T1 obtuvo mayor peso final que el T2 (112.7 kg vs 104.80 kg), pero fue ligeramente superior al T3 (112.7 kg vs 112.00 kg); para GTP el T1 (25.57 kg) y T3 (24.43 kg) fueron superiores al T2 (20.50 kg). Respecto a las medidas zoométricas PT, PA, AC, LC, los mayores valores fueron para el T1 seguido del T3 y T2. Para control de cargas parasitarias, el T3 fue efectivo para Trichuris y Strongylus, el T1 ejerció mejor control para Trichuris, en cambio el T2 fue el de menor control. El análisis financiero favorece al tratamiento T1 por ser de menor costo, sin embargo el T3 manifestó mejor comportamiento en la ganancia de peso a lo largo del estudio, por lo cual este puede ser utilizado a pesar de tener un mayor costo en relación al T1.

Refractive index and thickness analysis of natural silicon dioxide film growing on silicon with variable-angle spectroscopic ellipsometry

The refractive index and thickness of SiO2 thin films naturally grown on Si substrates were determined simultaneously within the wavelength range of 220-1100 nm with variable-angle spectroscopic ellipsometry. Different angles of incidence and wavelength ranges were chosen to enhance the analysis sensitivity for more accurate results. Several optical models describing the practical SiO2-Si system were investigated, and best results were obtained with the optical model, including an interface layer between SiO2 and Si, which proved the existence of the interface layer in this work as described in other publications.