Seawater carbonate chemistry and Ruditapes decussatus biological processes during experiments, 2011

We investigated the effects of ocean acidification on juvenile clams Ruditapes decussatus (average shell length 10.24 mm) in a controlled CO2 perturbation experiment. The carbonate chemistry of seawater was manipulated by diffusing pure CO2, to attain two reduced pH levels (by -0.4 and -0.7 pH units), which were compared to unmanipulated seawater. After 75 days we found no differences among pH treatments in terms of net calcification, size or weight of the clams. The naturally elevated total alkalinity of local seawater probably contributed to buffer the effects of increased pCO2 and reduced pH. Marine organisms may, therefore, show diverse responses to ocean acidification at local scales, particularly in coastal, estuarine and transitional waters, where the physical-chemical characteristics of seawater are most variable. Mortality was significantly reduced in the acidified treatments. This trend was probably related to the occurrence of spontaneous spawning events in the control and intermediate acidification treatments. Spawning, which was unexpected due to the small size of the clams, was not observed for the pH -0.7 treatment, suggesting that the increased survival under acidified conditions may have been associated with a delay in the reproductive cycle of the clams. Future research about the impacts of ocean acidification on marine biodiversity should be extended to other types of biological and ecological processes, apart from biological calcification.

Seawater carbonate chemistry and biological processes during experiments with Limacina helicina, 2009

Thecosome pteropods (pelagic mollusks) can play a key role in the food web of various marine ecosystems. They are a food source for zooplankton or higher predators such as fishes, whales and birds that is particularly important in high latitude areas. Since they harbor a highly soluble aragonitic shell, they could be very sensitive to ocean acidification driven by the increase of anthropogenic CO2 emissions. The effect of changes in the seawater chemistry was investigated on Limacina helicina, a key species of Arctic pelagic ecosystems. Individuals were kept in the laboratory under controlled pCO2 levels of 280, 380, 550, 760 and 1020 µatm and at control (0°C) and elevated (4°C) temperatures. The respiration rate was unaffected by pCO2 at control temperature, but significantly increased as a function of the pCO2 level at elevated temperature. pCO2 had no effect on the gut clearance rate at either temperature. Precipitation of CaCO3, measured as the incorporation of 45Ca, significantly declined as a function of pCO2 at both temperatures. The decrease in calcium carbonate precipitation was highly correlated to the aragonite saturation state. Even though this study demonstrates that pteropods are able to precipitate calcium carbonate at low aragonite saturation state, the results support the current concern for the future of Arctic pteropods, as the production of their shell appears to be very sensitive to decreased pH. A decline of pteropod populations would likely cause dramatic changes to various pelagic ecosystems.

Selectivity of diacylhydrazine insecticides to the predatory bug Orius laevigatus: In vivo and modeling/docking experiments

BACKGROUND: Knowledge of pesticide selectivity to natural enemies is necessary for a successful implementation of biological and chemical control methods in integrated pest management (IPM) programs. Diacylhydrazine (DAH)-based ecdysone agonists also known as molting-accelerating compounds (MACs) are considered a selective group of insecticides, and their compatibility with predatory Heteroptera, which are used as biological control agents, is known. However, their molecular mode of action has not been explored in beneficial insects such as Orius laevigatus (Fieber) (Hemiptera: Anthocoridae). RESULTS: In this project in vivo toxicity assays demonstrated that the DAH-based RH-5849, tebufenozide and methoxyfenozide have no toxic effect against O. laevigatus. The ligand-binding domain (LBD) of the ecdysone receptor (EcR) of O. laevigatus was sequenced and a homology protein model was constructed which confirmed a cavity structure with 12 ?-helixes, harboring the natural insect molting hormone 20-hydroxyecdysone. However, docking studies showed that a steric clash occurred for the DAH-based insecticides due to a restricted extent of the ligand-binding cavity of the EcR of O. laevigatus. CONCLUSIONS: The insect toxicity assays demonstrated that MACs are selective for O. laevigatus. The modeling/docking experiments are indications that these pesticides do not bind with the LBD-EcR of O. laevigatus and support that they show no biological effects in the predatory bug. These data help in explaining the compatible use of MACs together with predatory bugs in IPM programs. Keywords: Orius laevigatus, selectivity, diacylhydrazine insecticides, ecdysone receptor, homology modelling, docking studies.

Spatio-temporal dynamics of viruses are differentially affected by parasitoids depending on the mode of transmission by their insect vectors.

Relationships between agents in multitrophic systems are complex and very specific. Insect-transmitted plant viruses are completely dependent on the behaviour and distribution patterns of their vectors. The presence of natural enemies may directly affect aphid behaviour and spread of plant viruses, as the escape response of aphids might cause a potential risk for virus dispersal. The spatio-temporal dynamics of Cucumber mosaic virus (CMV) and Cucurbit aphid-borne yellows virus (CABYV), transmitted by Aphis gossypii in a non-persistent and persistent manner, respectively, were evaluated at short and long term in the presence and absence of the aphid parasitoid, Aphidius colemani. SADIE methodology was used to study the distribution patterns of both the virus and its vector, and their degree of association. Results suggested that parasitoids promoted aphid dispersion at short term, which enhanced CMV spread, though consequences of parasitism suggest potential benefits for disease control at long term. Furthermore, A. colemani significantly limited the spread and incidence of the persistent virus CABYV at long term. The impact of aphid parasitoids on the dispersal of plant viruses with different transmission modes is discussed.

Arquitectura de Control para la Conducción Autónoma de Vehículos en Entornos Urbanos y Autovías

Hoy en día, el desarrollo tecnológico en el campo de los sistemas inteligentes de transporte (ITS por sus siglas en inglés) ha permitido dotar a los vehículos con diversos sistemas de ayuda a la conducción (ADAS, del inglés advanced driver assistance system), mejorando la experiencia y seguridad de los pasajeros, en especial del conductor. La mayor parte de estos sistemas están pensados para advertir al conductor sobre ciertas situaciones de riesgo, como la salida involuntaria del carril o la proximidad de obstáculos en el camino. No obstante, también podemos encontrar sistemas que van un paso más allá y son capaces de cooperar con el conductor en el control del vehículo o incluso relegarlos de algunas tareas tediosas. Es en este último grupo donde se encuentran los sistemas de control electrónico de estabilidad (ESP - Electronic Stability Program), el antibloqueo de frenos (ABS - Anti-lock Braking System), el control de crucero (CC - Cruise Control) y los más recientes sistemas de aparcamiento asistido. Continuando con esta línea de desarrollo, el paso siguiente consiste en la supresión del conductor humano, desarrollando sistemas que sean capaces de conducir un vehículo de forma autónoma y con un rendimiento superior al del conductor. En este trabajo se presenta, en primer lugar, una arquitectura de control para la automatización de vehículos. Esta se compone de distintos componentes de hardware y software, agrupados de acuerdo a su función principal. El diseño de la arquitectura parte del trabajo previo desarrollado por el Programa AUTOPIA, aunque introduce notables aportaciones en cuanto a la eficiencia, robustez y escalabilidad del sistema. Ahondando un poco más en detalle, debemos resaltar el desarrollo de un algoritmo de localización basado en enjambres de partículas. Este está planteado como un método de filtrado y fusión de la información obtenida a partir de los distintos sensores embarcados en el vehículo, entre los que encontramos un receptor GPS (Global Positioning System), unidades de medición inercial (IMU – Inertial Measurement Unit) e información tomada directamente de los sensores embarcados por el fabricante, como la velocidad de las ruedas y posición del volante. Gracias a este método se ha conseguido resolver el problema de la localización, indispensable para el desarrollo de sistemas de conducción autónoma. Continuando con el trabajo de investigación, se ha estudiado la viabilidad de la aplicación de técnicas de aprendizaje y adaptación al diseño de controladores para el vehículo. Como punto de partida se emplea el método de Q-learning para la generación de un controlador borroso lateral sin ningún tipo de conocimiento previo. Posteriormente se presenta un método de ajuste on-line para la adaptación del control longitudinal ante perturbaciones impredecibles del entorno, como lo son los cambios en la inclinación del camino, fricción de las ruedas o peso de los ocupantes. Para finalizar, se presentan los resultados obtenidos durante un experimento de conducción autónoma en carreteras reales, el cual se llevó a cabo en el mes de Junio de 2012 desde la población de San Lorenzo de El Escorial hasta las instalaciones del Centro de Automática y Robótica (CAR) en Arganda del Rey. El principal objetivo tras esta demostración fue validar el funcionamiento, robustez y capacidad de la arquitectura propuesta para afrontar el problema de la conducción autónoma, bajo condiciones mucho más reales a las que se pueden alcanzar en las instalaciones de prueba. ABSTRACT Nowadays, the technological advances in the Intelligent Transportation Systems (ITS) field have led the development of several driving assistance systems (ADAS). These solutions are designed to improve the experience and security of all the passengers, especially the driver. For most of these systems, the main goal is to warn drivers about unexpected circumstances leading to risk situations such as involuntary lane departure or proximity to other vehicles. However, other ADAS go a step further, being able to cooperate with the driver in the control of the vehicle, or even overriding it on some tasks. Examples of this kind of systems are the anti-lock braking system (ABS), cruise control (CC) and the recently commercialised assisted parking systems. Within this research line, the next step is the development of systems able to replace the human drivers, improving the control and therefore, the safety and reliability of the vehicles. First of all, this dissertation presents a control architecture design for autonomous driving. It is made up of several hardware and software components, grouped according to their main function. The design of this architecture is based on the previous works carried out by the AUTOPIA Program, although notable improvements have been made regarding the efficiency, robustness and scalability of the system. It is also remarkable the work made on the development of a location algorithm for vehicles. The proposal is based on the emulation of the behaviour of biological swarms and its performance is similar to the well-known particle filters. The developed method combines information obtained from different sensors, including GPS, inertial measurement unit (IMU), and data from the original vehicle’s sensors on-board. Through this filtering algorithm the localization problem is properly managed, which is critical for the development of autonomous driving systems. The work deals also with the fuzzy control tuning system, a very time consuming task when done manually. An analysis of learning and adaptation techniques for the development of different controllers has been made. First, the Q-learning –a reinforcement learning method– has been applied to the generation of a lateral fuzzy controller from scratch. Subsequently, the development of an adaptation method for longitudinal control is presented. With this proposal, a final cruise control controller is able to deal with unpredictable environment disturbances, such as road slope, wheel’s friction or even occupants’ weight. As a testbed for the system, an autonomous driving experiment on real roads is presented. This experiment was carried out on June 2012, driving from San Lorenzo de El Escorial up to the Center for Automation and Robotics (CAR) facilities in Arganda del Rey. The main goal of the demonstration was validating the performance, robustness and viability of the proposed architecture to deal with the problem of autonomous driving under more demanding conditions than those achieved on closed test tracks.

Algoritmos genéticos en control activo de ruido

Este proyecto se centra en la implementación de un sistema de control activo de ruido mediante algoritmos genéticos. Para ello, se ha tenido en cuenta el tipo de ruido que se quiere cancelar y el diseño del controlador, parte fundamental del sistema de control. El control activo de ruido sólo es eficaz a bajas frecuencias, hasta los 250 Hz, justo para las cuales los elementos pasivos pierden efectividad, y en zonas o recintos de pequeñas dimensiones y conductos. El controlador ha de ser capaz de seguir todas las posibles variaciones del campo acústico que puedan producirse (variaciones de fase, de frecuencia, de amplitud, de funciones de transferencia electro-acústicas, etc.). Su funcionamiento está basado en algoritmos FIR e IIR adaptativos. La elección de un tipo de filtro u otro depende de características tales como linealidad, causalidad y número de coeficientes. Para que la función de transferencia del controlador siga las variaciones que surgen en el entorno acústico de cancelación, tiene que ir variando el valor de los coeficientes del filtro mediante un algoritmo adaptativo. En este proyecto se emplea como algoritmo adaptativo un algoritmo genético, basado en la selección biológica, es decir, simulando el comportamiento evolutivo de los sistemas biológicos. Las simulaciones se han realizado con dos tipos de señales: ruido de carácter aleatorio (banda ancha) y ruido periódico (banda estrecha). En la parte final del proyecto se muestran los resultados obtenidos y las conclusiones al respecto. Summary. This project is focused on the implementation of an active noise control system using genetic algorithms. For that, it has been taken into account the noise type wanted to be canceled and the controller design, a key part of the control system. The active noise control is only effective at low frequencies, up to 250 Hz, for which the passive elements lose effectiveness, and in small areas or enclosures and ducts. The controller must be able to follow all the possible variations of the acoustic field that might be produced (phase, frequency, amplitude, electro-acoustic transfer functions, etc.). It is based on adaptive FIR and IIR algorithms. The choice of a kind of filter or another depends on characteristics like linearity, causality and number of coefficients. Moreover, the transfer function of the controller has to be changing filter coefficients value thought an adaptive algorithm. In this project a genetic algorithm is used as adaptive algorithm, based on biological selection, simulating the evolutionary behavior of biological systems. The simulations have been implemented with two signal types: random noise (broadband) and periodic noise (narrowband). In the final part of the project the results and conclusions are shown.

Compatibilidad de Eretmocerus mundus Mercet (Hymenoptera: Aphelinidae) y Amblyseius swirskii Athias-Henriot (Acari: Phytoseiidae), importantes enemigos naturales de la mosca blanca Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) en cultivos hortícolas, con nuevas barreras físicas selectivas y modernos plaguicidas

Los programas de Gestión Integrada de Plagas (GIP) promueven el uso de estrategias de control que sean respetuosas con el medio ambiente, sin embargo el uso de insecticidas en los cultivos hortícolas sigue siendo necesario para el control de determinadas plagas, como es el caso de la mosca blanca Bemisia tabaci (Gennadius). Por ello, el objetivo de esta tesis es el estudio de la integración de las tres estrategias de control más empleadas hoy en día para el control de plagas: el control biológico, el físico y el químico. Una primera parte de este trabajo ha consistido en el estudio de los efectos letales y subletales de once insecticidas, aplicados a la dosis máxima de campo, sobre los enemigos naturales Eretmocerus mundus Mercet y Amblyseius swirskii Athias-Henriot, mediante ensayos de laboratorio y persistencia (laboratorio extendido). Para la evaluación de la toxicidad de los insecticidas sobre los estados de vida más protegidos de estos enemigos naturales, se trataron bajo la Torre de Potter las pupas de E. mundus y los huevos de A. swirskii. Además, se llevaron a cabo ensayos de contacto residual para determinar los efectos letales y subletales de estos insecticidas sobre el estado adulto de ambas especies de enemigos naturales. Para ello, los pesticidas se aplicaron sobre placas de cristal (laboratorio) o sobre plantas (laboratorio extendido: persistencia). Los resultados mostraron que los insecticidas flonicamida, flubendiamida, metaflumizona, metoxifenocida, spiromesifen y spirotetramat eran compatibles con el estado de pupa de E. mundus (OILB 1: Inocuos). Sin embargo, abamectina, deltametrina y emamectina fueron categorizadas como ligeramente tóxicas (OILB 2) al causar efectos deletéreos. Los dos pesticidas más tóxicos fueron spinosad y sulfoxaflor, los cuales redujeron significativamente la emergencia de las pupas tratadas (OILB 4: Tóxicos). Flonicamida, flubendiamida, metoxifenocida y spiromesifen fueron compatibles con el estado adulto de E. mundus (OILB 1: Inocuos). Abamectina, deltametrina, emamectina, metaflumizona y spiromesifen pueden ser recomendados para su uso en programas de GIP, si se usan los plazos de seguridad apropiados, de acuerdo con la persistencia de cada uno de estos insecticidas, antes de la liberación del enemigo natural. Al contrario, spinosad y sulfoxaflor no resultaron ser compatibles (OILB D: Persistentes), aunque la realización de ensayos adicionales es necesaria para ver los efectos de los mismos en campo. Todos los insecticidas estudiados, excepto el spirotetramat (OILB 2: Ligeramente tóxico), fueron selectivos para el estado de huevo de A. swirskii (OILB 1: Inocuos). Flonicamida, flubendiamida, metaflumizona, metoxifenocida, spiromesifen, spirotetramat y sulfoxaflor, fueron compatibles con el estado adulto de A. swirskii (OILB 1: Inocuos). Abamectina, deltametrina, emamectina y spinosad pueden ser recomendados para su uso en programas de GIP, si se usan los plazos de seguridad apropiados, de acuerdo con la persistencia de cada uno de estos insecticidas, antes de la liberación del enemigo natural. Entre las nuevas estrategias de la GIP, los plásticos y mallas fotoselectivas han demostrado ser una herramienta importante para el control de plagas y enfermedades en cultivos hortícolas protegidos. Por ello, en una segunda parte de este trabajo, se estudiaron tanto los efectos directos, como la combinación de efectos directos y mediados por planta y plaga de ambientes pobres en luz UV, en presencia o ausencia del Virus del rizado amarillo del tomate (TYLCV), sobre E. mundus. En primer lugar, se realizó un ensayo al aire libre para la evaluación de la capacidad de vuelo de E. mundus en cajas tipo túnel (1 x 0,6 x 0,6 m) cubiertas con distintas barreras absorbentes de luz UV. Se detectó un efecto directo en la capacidad de orientación de E. mundus, debido a que este parasitoide utiliza estímulos visuales para localizar a sus huéspedes, únicamente en las barreras que bloqueaban más del 65% de la luz UV (malla G). En segundo lugar, bajo condiciones de invernadero, se evaluó la combinación de efectos directos y mediados por planta y plaga sobre E. mundus, usando plantas de tomate sanas o infectadas con el TYLCV y cajas (30 x 30 x 60 cm) cubiertas con los distintos plásticos fotoselectivos. En este caso, no se observó ningún efecto en la capacidad benéfica del parasitoide cuando este estaba en contacto con plantas de tomate infestadas con ninfas de B. tabaci, lo que demuestra que este insecto usa estímulos táctiles para encontrar a sus huéspedes a cortas distancias. Además, las diferentes condiciones de radiación UV estudiadas tuvieron cierto impacto en la morfología, fisiología y bioquímica de las plantas de tomate, infestadas o no con el virus de la cuchara, detectándose pequeñas alteraciones en alguno de los parámetros estudiados, como el peso fresco y seco, el contenido en H y el espesor de las cutículas y de las paredes celulares de la epidermis foliar. Por último, no se observaron efectos de la radiación UV mediados por planta, ni en B. tabaci ni en su parasitoide, E. mundus. En una tercera parte, se evaluaron los efectos de una malla tratada con bifentrin sobre ambos enemigos naturales, en ensayos de laboratorio, semicampo y campo. Las mallas tratadas fueron diseñadas originariamente para el control de mosquitos vectores de la malaria, y actualmente se está trabajando para su uso en agricultura, como una nueva estrategia de control de plagas. En ensayos de laboratorio, cuando adultos de E. mundus y A. swirskii se expusieron por contacto durante 72 horas con la malla tratada (cajas de 6 cm diámetro), se registró una alta mortalidad. Sin embargo, en el ensayo de preferencia, estos enemigos naturales no fueron capaces de detectar la presencia de bifentrin y, en aquellos individuos forzados a atravesar la malla tratada, no se observó mortalidad a corto plazo (72 horas). En estudios de semicampo, llevados a cabo bajo condiciones de invernadero en cajas de 25 x 25 x 60 cm de altura, la capacidad benéfica de E. mundus no se vio afectada. Finalmente, en ensayos de campo llevados a cabo en invernaderos comerciales (4000m2) en Almería, A. swirskii no se vio afectado por la presencia en el cultivo de la malla tratada con bifentrin y los niveles de infestación de B. tabaci y F. occidentalis detectados bajo dicha malla, fueron inferiores a los del control. Por último, se ha evaluado la composición de la microflora bacteriana de tres especies de parasitoides, E. mundus, Eretmocerus eremicus Rose & Zolnerowich y Encarsia formosa Gahan, y la influencia de la misma en su susceptibilidad a insecticidas. Se llevó a cabo una extracción total de ADN de los insectos y la región variable V4 del ARNr se amplificó usando cebadores universales bacterianos. Para identificar las secuencias de los géneros bacterianos presentes en los parasitoides, se realizó una Next Generation sequencing (Illumina sequencing). Una vez identificados los géneros bacterianos, el gen ADNr 16S de las Actinobacterias se amplificó del ADN extraído de los insectos, usando cebadores universales bacterianos y específicos de Actinobacterias, y los productos de la Nested PCR fueron clonados para identificar todas las especies del género Arthrobacter. Tres bacterias (A. aurescens Phillips, A. nicotinovarans Kodama, Yamamoto, Amano and Amichi y A. uratoxydans Stackebrandt, Fowler, Fiedler and Seiler), próximas a las especies de Arthrobacter presentes en los parasitoides, se obtuvieron de la colección bacteriana del BCCMTM/LMG y se midió su actividad esterasa. Finalmente, se realizaron ensayos con antibióticos (tetraciclina) y de contacto residual con insecticidas (abamectina) para determinar la influencia de las especies de Arthrobacter en la susceptibilidad de E. mundus a insecticidas. Los resultados muestran que este género bacteriano puede afectar a la toxicidad de E. mundus a abamectina, mostrando la importancia de la comunidad microbiana en enemigos naturales, factor que debe ser considerado en los estudios de evaluación de los riesgos de los insecticidas. ABSTRACT Integrated Pest Management (IPM) programs promote the use of control strategies more respectful with the environment; however the use of insecticides in vegetable crops is still needed to control certain pests, such as the whitefly Bemisia tabaci (Gennadius). Therefore, the objective of this work is to study the integration of the three most commonly used pest control strategies nowadays: biological, physical and chemical control. Firstly, the lethal and sublethal effects of eleven insecticides, applied at their maximum field recommended concentration, on the parasitic wasp Eretmocerus mundus Mercet and the predator Amblyseius swirskii Athias-Henriot has been assessed in the laboratory and in persistence tests (extended laboratory). To test the effects of pesticides on the most protected life stage of these natural enemies, E. mundus pupae and A. swirskii eggs were sprayed under a Potter precision spray tower. Laboratory contact tests were therefore conducted to determine the lethal and sublethal effects of these pesticides on the adult stage of these natural enemies. In the residual contact tests the pesticides were applied on glass plates (laboratory) or plants (extended laboratory: persistence). The study showed that the insecticides flonicamid, flubendiamide, metaflumizone, methoxyfenozide, spiromesifen and spirotetramat were selective for E. mundus pupae (IOBC 1: Harmless). Nevertheless, abamectin, deltamethrin and emamectin were categorized as slightly harmful (IOBC 2) due to the deleterious effects caused. The two most harmful pesticides were spinosad and sulfoxaflor, which significantly reduced the adult emergence from treated pupae (IOBC 4: Harmful). Flonicamid, flubendiamide, methoxyfenozide and spiromesifen were compatible with E. mundus adults (IOBC 1: Harmless). Base on the duration of the harmful activity, abamectin, deltamethrin, emamectin, metaflumizone and spirotetramat could be recommended for use in IPM programs if appropriate safety deadlines are used before the natural enemy release. On the contrary, spinosad and sulfoxaflor were not compatible (IOBC D: persistent), although additional studies are required to determine their effects under field conditions. All the pesticides tested, except spirotetramat (IOBC 2: Slightly harmful), were selective for A. swirskii eggs (IOBC 1: Harmless). Flonicamid, flubendiamide, metaflumizone, methoxyfenozide, spiromesifen, spirotetramat and sulfoxaflor were compatible with A. swirskii adults (IOBC 1: Harmless). However, abamectin, deltamethrin, emamectin and spinosad could be recommended for use in IPM programs if appropriate safety deadlines are used before the natural enemy release. Among new IPM strategies, UV-absorbing photoselective plastic films and nets have been shown to be an important tool for the control of pests and diseases in horticultural protected crops. Because of that, we secondly studied the plant and pest insect-mediated and/or the direct effects on E. mundus under different UV radiation conditions, in presence or absence of the Tomato Yellow Leaf Curl Virus (TYLCV). In the first experiment, performed outdoors, the flight activity of E. mundus was studied in one-chamber tunnels (1 x 0.6 x 0.6 m) covered with different photoselective barriers. Because E. mundus uses visual cues for host location at a long distance, a direct effect on its host location ability was detected, but only in the UV-absorbing barriers blocking more than 65% of the UV light (G net). In a second experiment, the direct and plant and pest insect-mediated effects of different UV radiation conditions on E. mundus were studied, inside cages (30 x 30 x 60 cm) covered with the different UVplastic films and under greenhouse conditions, using healthy or TYLCV-virus infected tomato plants. In this case, not any effect on the beneficial capacity of this parasitoid was detected, proving that he uses tactile cues at a short distance of the host. Moreover, the different UV radiation conditions studied had a certain direct impact in the morphology, physiology and biochemistry of tomato plants infested or not with the TYLCV, and small alterations in some parameters such as fresh and dry weight, H percentage and cuticle and cell wall thickness of epidermal cells of the leaves, were detected. Finally, none plant-mediated UV effects neither in the whitefly B. tabaci nor in their parasitic wasp were found. Thirdly, the effects of a bifenthrin treated net were evaluated in different laboratory, semi-field and field experiments on the natural enemies studied. Treated nets were developed long time ago aiming at the control of the mosquitoes vectors of malaria, and nowadays, there is a great interest on assessing the possibility of their use in agriculture. In laboratory assays, a high mortality was recorded when E. mundus and A. swirskii adults were exposed by contact to the bifenthrin treated net for 72 hours in small cages (12 cm diameter). However, these natural enemies were not able to detect the presence of bifenthrin in a dual-choice test and no short-term mortality (72 hours) was recorded in those individuals that went through the treated net. In semi-field assays, performed under greenhouse conditions with cages of 25 x 25 x 60 cm high, the beneficial capacity of E. mundus was not affected. Finally, in field assays carried out in commercial multispan greenhouses (4000 m2) in Almería, A. swirskii was not affected by the presence of the bifenthrin treated net in the crop and the B. tabaci and F. occidentalis infestation levels were significantly lower than in the control. Finally, the composition of the microflora present in three species of parasitoids, E. mundus, Eretmocerus eremicus Rose & Zolnerowich and Encarsia formosa Gahan, and its influence in their susceptibility to insecticides, have been assessed. A total DNA extraction was performed on insects and universal bacterial primers were used to amplify the variable V4 region of the rRNA. A Next Generation sequencing (Illumina sequencing) was performed to identify the sequences of the bacterial genera present in the parasitic wasps. Once, the bacterial genera were identified, 16S rDNA gene of Actinobacteria were amplified from insects DNA extracts using the universal bacterial and actinobacterial primers, and the nested PCR products, were cloned to identify the Arthrobacter species. Three bacteria (A. aurescens Phillips, A. nicotinovarans Kodama, Yamamoto, Amano and Amichi and A. uratoxydans Stackebrandt, Fowler, Fiedler and Seiler), having the closest match with the Arthrobacter species present in the parasitic wasps, were obtained from the BCCMTM/LMG bacteria collection and its esterase activity was measured. Finally, antibiotic and residual contact tests were done to determine the influence of Arthrobacter species in the susceptibility of E. mundus to pesticides (abamectin). The results suggest that this bacterial genus can affect the toxicity of E. mundus to abamectin, which in turn supports the importance of the microbial community in natural enemies that it should be considered as a factor in risk assessment tests of pesticides.

Detection of Biological CO2 and 1,3-Pentadiene Using Non-refrigerated Low-Cost MWIR Detectors

The early detection of spoiling metabolic products in contaminated food is a very important tool to control quality. Some volatile compounds produce unpleasant odours at very low concentrations, making their early detection very challenging. This is the case of 1,3-pentadiene produced by microorganisms through decarboxylation of the preservative sorbate. In this work, we have developed a methodology to use the data produced by a low-cost, compact MWIR (Mid-Wave IR) spectrometry device without moving parts, which is based on a linear array of 128 elements of VPD PbSe coupled to a linear variable filter (LVF) working in the spectral range between 3 and 4.6 ?m. This device is able to analyze food headspace gases through dedicated sample presentation setup. This methodology enables the detection of CO2 and the volatile compound 1,3-pentadiene, as compared to synthetic patrons. Data analysis is based on an automated multidimensional dynamic processing of the MWIR spectra. Principal component and discriminant analysis allow segregating between four yeast strains including producers and no producers. The segregation power is accounted as a measure of the discrimination quality.

DRC1, DNA replication and checkpoint protein 1, functions with DPB11 to control DNA replication and the S-phase checkpoint in Saccharomyces cerevisiae

In addition to DNA polymerase complexes, DNA replication requires the coordinate action of a series of proteins, including regulators Cdc28/Clb and Dbf4/Cdc7 kinases, Orcs, Mcms, Cdc6, Cdc45, and Dpb11. Of these, Dpb11, an essential BRCT repeat protein, has remained particularly enigmatic. The Schizosaccharomyces pombe homolog of DPB11, cut5, has been implicated in the DNA replication checkpoint as has the POL2 gene with which DPB11 genetically interacts. Here we describe a gene, DRC1, isolated as a dosage suppressor of dpb11–1. DRC1 is an essential cell cycle-regulated gene required for DNA replication. We show that both Dpb11 and Drc1 are required for the S-phase checkpoint, including the proper activation of the Rad53 kinase in response to DNA damage and replication blocks. Dpb11 is the second BRCT-repeat protein shown to control Rad53 function, possibly indicating a general function for this class of proteins. DRC1 and DPB11 show synthetic lethality and reciprocal dosage suppression. The Drc1 and Dpb11 proteins physically associate and function together to coordinate DNA replication and the cell cycle.

Control of fertilization-independent endosperm development by the MEDEA polycomb gene in Arabidopsis

Higher plant reproduction is unique because two cells are fertilized in the haploid female gametophyte. Egg and sperm nuclei fuse to form the embryo. A second sperm nucleus fuses with the central cell nucleus that replicates to generate the endosperm, a tissue that supports embryo development. To understand mechanisms that initiate reproduction, we isolated a mutation in Arabidopsis, f644, that allows for replication of the central cell and subsequent endosperm development without fertilization. When mutant f644 egg and central cells are fertilized by wild-type sperm, embryo development is inhibited, and endosperm is overproduced. By using a map-based strategy, we cloned and sequenced the F644 gene and showed that it encodes a SET-domain polycomb protein. Subsequently, we found that F644 is identical to MEDEA (MEA), a gene whose maternal-derived allele is required for embryogenesis [Grossniklaus, U., Vielle-Calzada, J.-P., Hoeppner, M. A. & Gagliano, W. B. (1998) Science 280, 446–450]. Together, these results reveal functions for plant polycomb proteins in the suppression of central cell proliferation and endosperm development. We discuss models to explain how polycomb proteins function to suppress endosperm and promote embryo development.