Formal Education, Mismatch and Wages After Transition: Assessing the Impact of Unobserved Heterogeneity using Matching Estimators

This paper studies the incidence and consequences of the mismatch between formal education and the educational requirements of jobs in Estonia during the years 1997-2003. We fi nd large wage penalties associated with the phenomenon of educational mismatch. Moreover, the incidence and wage penalty of mismatches increase with age. This suggests that structural educational mismatches can occur after fast transition periods. Our results are robust for various methodologies, and more importantly regarding departures from the exogeneity assumptions inherent in the matching estimators used in our analysis

The impact of bioavailability limitations on microbial stable isotope fractionation in a multiphase system

Stable isotope fractionation analysis of contaminants is a promising method for assessing biodegradation of contaminants in natural systems. However, standard procedures to determine stable isotope fractionation factors, so far, neglect the influence of pollutant bioavailability on stable isotope fractionation. On a microscale, bioavailability may vary due to the spatio-temporal variability of local contaminant concentrations, limited effective diffusivities of the contaminants and cell densities, and thus, the pollutant supply might not meet the intrinsic degradation capacity of the microorganisms. The aim of this study was to demonstrate the effect of bioavailability on the apparent stable isotope fractionation, using a multiphase laboratory setup. The data gained show that the apparent isotope fractionation factors observed during biodegradation processes depend on the amount of biomass and/or the rate of toluene mass transfer from a second to the aqueous phase. They indicate that physico-chemical processes need to be taken into account when stable isotope fractionation analysis is used for the quantification of environmental contaminant degradation.

Identifying strategies for mitigating the global warming impact of the EU-25 economy using a multi-objective input-output approach

Global warming mitigation has recently become a priority worldwide. A large body of literature dealing with energy related problems has focused on reducing greenhouse gases emissions at an engineering scale. In contrast, the minimization of climate change at a wider macroeconomic level has so far received much less attention. We investigate here the issue of how to mitigate global warming by performing changes in an economy. To this end, we make use of a systematic tool that combines three methods: linear programming, environmentally extended input output models, and life cycle assessment principles. The problem of identifying key economic sectors that contribute significantly to global warming is posed in mathematical terms as a bi criteria linear program that seeks to optimize simultaneously the total economic output and the total life cycle CO2 emissions. We have applied this approach to the European Union economy, finding that significant reductions in global warming potential can be attained by regulating specific economic sectors. Our tool is intended to aid policymakers in the design of more effective public policies for achieving the environmental and economic targets sought.

Investigating the impact of small versus large firms on economic performance of countries and industries

Following earlier work by Audretsch et al. (2002), we assume that an optimal size-class structure exists, in terms of achieving maximal economic growth rates. Such an optimal structure is likely to exist as economies need a balance between the core competences of large firms (such as exploitation of economies of scale) and those of smaller firms (such as flexibility and exploration of new ideas). Accordingly, changes in size-class structure (i.e., changes in the relative shares in economic activity accounted for by micro, small, medium-sized and large firms) may affect macro-economic growth. Using a unique data base of the EU-27 countries for the period 2002-2008 for five broad sectors of economic activity and four size-classes, we find empirical support which suggests that, on average for these countries over this period, the share of micro and large firms may have been ‘above optimum’ (particularly in lower income EU countries) whereas the share of medium-sized firms may have been ‘below optimum’ (particularly in higher income EU countries). This evidence suggests that the transition from a ‘managed’ to an ‘entrepreneurial’ economy (Audretsch and Thurik, 2001) has not been completed yet in all countries of the EU-27. Keywords: small firms, large firms, size-classes, macro-economic performance

The role of different factors related to social impact of heavy events: considerations about the intensity thresholds in densely populated areas

In the assessment of social impact caused by meteorological events, factors of different natures need to be considered. Not only does hazard itself determine the impact that a severe weather event has on society, but also other features related to vulnerability and exposure. The requests of data related to insurance claims received in meteorological services proved to be a good indicator of the social impact that a weather event causes, according to studies carried out by the Social Impact Research Group, created within the framework of the MEDEX project. Taking these requests as proxy data, diverse aspects connected to the impact of heavy rain events have been studied. The rainfall intensity, in conjunction with the population density, has established itself as one of the key factors in social impact studies. One of the conclusions we obtained is that various thresholds of rainfall should be applied for areas of varying populations. In this study, the role of rainfall intensity has been analysed for a highly populated urban area like Barcelona. A period without significant population changes has been selected for the study to minimise the effects linked to vulnerability and exposure modifications. First, correlations between rainfall recorded in different time intervals and requests were carried out. Afterwards, a method to include the intensity factor in the social impact index was suggested based on return periods given by intensity duration frequency (IDF) curves.

Regional variability in the impact of human capital on regional growth

The first objective of this study is to furnish new evidence concerning the aggregate profitability of the accumulation of human capital. In addition to the traditional measure of the return to human capital, combining the information on its shadow price with the social cost of providing education allows us to confirm the profitability of human capital investments as a tool for promoting economic growth. The possibility of obtaining estimations of these effects for each Spanish region enables us to empirically evaluate the amount of heterogeneity across economies in the effects of human capital. As a second objective, we provide evidence on the indirect effect of human capital in making private capital investment more attractive. Among the main explanations for this process, we observe that higher worker skill levels enable higher returns to be extracted from investment in physical capital.

Impact of unsymmetrical loads in distribution networks

Since it is virtually impossible to balance loads in three-phase system, unbalance in a varying degree exists almost in all distribution networks. The aim of the thesis is to analyze the impact of this unbalance subject to different configurations of distribution system and winding connection of the supplying transformer. Also impact of the voltage unbalance on the equipment is investigated. In order to make the investigation more visual, the following calculations have been conducted: - Unsymmetrical load in four-wire star connected network - Unsymmetrical load in four-wire star connected network with broken zero conductor (or three-wire network). - Unsymmetrical load when the supplying transformer is so-called zigzag transformer. PDF created

The impact of FTAs on MENA trade in agricultural and industrial products

This paper analyses the impact of Free Trade Agreements (FTAs) on Middle East and North African Countries (MENA) trade for the period 1994-2010. The analysis distinguishes between industrial and agricultural trade to take into account the different liberalisation schedules. An augmented gravity model is estimated using up-to-date panel data techniques to control for all time-invariant bilateral factors that influence bilateral trade as well as for the so-called multilateral resistance factors. We also control for the endogeneity of the agreements and test for self-selection bias due to the presence of zero trade in our sample. The main findings indicate that North-South-FTAs and South-South- FTAs have a differential impact in terms of increasing trade in MENA countries, with the former being more beneficial in terms of exports for MENA countries, but both showing greater global market integration. We also find that FTAs that include agricultural products, in which MENA countries have a clear comparative advantage, have more favourable effects for these countries than those only including industrial products. JEL code: F10, F15

Impact of maternity care policy in Catalonia: a retrospective cross-sectional study of service delivery in public and private hospitals

Background: As a result of the growing number of interventions that are now performed in the context of maternity care, health authorities have begun to examine the possible repercussions for service provision and for maternal and neonatal health. In Spain the Strategy Paper on Normal Childbirth was published in 2008, and since then the authorities in Catalonia have sought to implement its recommendations. This paper reviews the current provision of maternity care in Catalonia. Methods: This was a descriptive study. Hospitals were grouped according to their source of funding (public or private) and were stratified (across four strata) on the basis of the annual number of births recorded within their respective maternity service. Data regarding the distribution of obstetric professionals were taken from an official government survey of hospitals published in 2010. The data on obstetric interventions (caesarean, use of forceps, vacuum or non-specified instruments) performed in 2007, 2010 and 2012 were obtained by consulting discharge records of 44 public and 20 private hospitals, which together provide care in 98% of all births in Catalonia. Proportions and confidence intervals were calculated for each intervention performed in all full-term (3742 weeks) singleton births. Results: Analysis of staff profiles according to the stratification of hospitals showed that almost all the hospitals had more obstetricians than midwives among their maternity care staff. Public hospitals performed fewer caesareans [range between 19.20% (CI 18.84-19.55) and 28.14% (CI 27.73-28.54)] than did private hospitals [range between 32.21% (CI 31.78-32.63) and 39.43% (CI 38.98-39.87)]. The use of forceps has decreased in public hospitals. The use of a vacuum extractor has increased and is more common in private hospitals. Conclusions: Caesarean section is the most common obstetric intervention performed during full-term singleton births in Catalonia. The observed trend is stable in the group of public hospitals, but shows signs of a rise among private institutions. The number of caesareans performed in accredited public hospitals covers a limited range with a stable trend. Among public hospitals the highest rate of caesareans is found in non-accredited hospitals with a lower annual number of births.

Impact of maternity care policy in Catalonia: a retrospective cross-sectional study of service delivery in public and private hospitals

Background: As a result of the growing number of interventions that are now performed in the context of maternity care, health authorities have begun to examine the possible repercussions for service provision and for maternal and neonatal health. In Spain the Strategy Paper on Normal Childbirth was published in 2008, and since then the authorities in Catalonia have sought to implement its recommendations. This paper reviews the current provision of maternity care in Catalonia. Methods: This was a descriptive study. Hospitals were grouped according to their source of funding (public or private) and were stratified (across four strata) on the basis of the annual number of births recorded within their respective maternity service. Data regarding the distribution of obstetric professionals were taken from an official government survey of hospitals published in 2010. The data on obstetric interventions (caesarean, use of forceps, vacuum or non-specified instruments) performed in 2007, 2010 and 2012 were obtained by consulting discharge records of 44 public and 20 private hospitals, which together provide care in 98% of all births in Catalonia. Proportions and confidence intervals were calculated for each intervention performed in all full-term (3742 weeks) singleton births. Results: Analysis of staff profiles according to the stratification of hospitals showed that almost all the hospitals had more obstetricians than midwives among their maternity care staff. Public hospitals performed fewer caesareans [range between 19.20% (CI 18.84-19.55) and 28.14% (CI 27.73-28.54)] than did private hospitals [range between 32.21% (CI 31.78-32.63) and 39.43% (CI 38.98-39.87)]. The use of forceps has decreased in public hospitals. The use of a vacuum extractor has increased and is more common in private hospitals. Conclusions: Caesarean section is the most common obstetric intervention performed during full-term singleton births in Catalonia. The observed trend is stable in the group of public hospitals, but shows signs of a rise among private institutions. The number of caesareans performed in accredited public hospitals covers a limited range with a stable trend. Among public hospitals the highest rate of caesareans is found in non-accredited hospitals with a lower annual number of births.

A Comparison of the Environmental Impact of Different AOPs: Risk Indexes

Today, environmental impact associated with pollution treatment is a matter of great concern. A method is proposed for evaluating environmental risk associated with Advanced Oxidation Processes (AOPs) applied to wastewater treatment. The method is based on the type of pollution (wastewater, solids, air or soil) and on materials and energy consumption. An Environmental Risk Index (E), constructed from numerical criteria provided, is presented for environmental comparison of processes and/or operations. The Operation Environmental Risk Index (EOi) for each of the unit operations involved in the process and the Aspects Environmental Risk Index (EAj) for process conditions were also estimated. Relative indexes were calculated to evaluate the risk of each operation (E/NOP) or aspect (E/NAS) involved in the process, and the percentage of the maximum achievable for each operation and aspect was found. A practical application of the method is presented for two AOPs: photo-Fenton and heterogeneous photocatalysis with suspended TiO2 in Solarbox. The results report the environmental risks associated with each process, so that AOPs tested and the operations involved with them can be compared.

Impact of multimorbidity on disability and quality of life in the spanish older population

BACKGROUND: Population aging is closely related to high prevalence of chronic conditions in developed countries. In this context, health care policies aim to increase life span cost-effectively while maintaining quality of life and functional ability. There is still, however, a need for further understanding of how chronic conditions affect these health aspects. The aim of this paper is to assess the individual and combined impact of chronic physical and mental conditions on quality of life and disability in Spain, and secondly to show gender trends. METHODS: Cross-sectional data were collected from the COURAGE study. A total of 3,625 participants over 50 years old from Spain were included. Crude and adjusted multiple linear regressions were conducted to detect associations between individual chronic conditions and disability, and between chronic conditions and quality of life. Separate models were used to assess the influence of the number of diseases on the same variables. Additional analogous regressions were performed for males and females. RESULTS: All chronic conditions except hypertension were statistically associated with poor results in quality of life and disability. Depression, anxiety and stroke were found to have the greatest impact on outcomes. The number of chronic conditions was associated with substantially lower quality of life [β for 4+ diseases: -18.10 (-20.95,-15.25)] and greater disability [β for 4+ diseases: 27.64 (24.99,30.29]. In general, women suffered from higher rates of multimorbidity and poorer results in quality of life and disability. CONCLUSIONS: Chronic conditions impact greatly on quality of life and disability in the older Spanish population, especially when co-occurring diseases are added. Multimorbidity considerations should be a priority in the development of future health policies focused on quality of life and disability. Further studies would benefit from an expanded selection of diseases. Policies should also deal with gender idiosyncrasy in certain cases.

The Impact of Aspen and Alder on the Quality of NHBK

The purpose of this work was to study the effect of aspen and alder on birch cooking and the quality of the pulp produced. Three different birch kraft pulps were studied. As a reference, pure aspen and alder were included. The laboratory trials were done at the UPM Research Centre in Lappeenranta, Finland. The materials used were birch, aspen and alder mill chips that were collected around the area of South-Carelia in Finland. The chips used in the study were pulped using a standard kraft process. The pulps including birch fibres were ECF-bleached at laboratory scale to a target brightness of 85 %. The bleached pulps were beaten at low consistency by a laboratory Voith Sulzer refiner and tested for optical and physical properties. The theoretical part is a study of hardwoods that takes into accounts the differences between birch, aspen and alder. Major sub-areas were fibre and paper-technical properties as well as chemical composition and their influence on the different properties. The pulp properties of birch, aspen and alder found in previous studies were reported. Russian hardwood forest resources were also investigated. The fundamentals of kraft pulping and bleaching were studied at the end of theoretical part. The major effect of replacing birch with aspen and alder was the deterioration (lowering) of tensile and tear strengths. In other words, addition of aspen and alder to a birch furnish reduced strength properties. The reinforcement ability of the tested pulps was the following: 100 % birch > 80 % birch, 20 % aspen > 70 % birch, 20 % aspen, 10 % alder. The second thing noted was that blending of birch together with aspen and alder give better smoothness, optical properties and also formation. It can be concluded, that replacement of birch with alder during cooking by more than 10 % can negatively affect on the paper-technical properties of birch pulp. Mixing pure birch and aspen pulps would be more beneficial when producing printing paper made from chemical pulp.