Gas-metal reactions and porosity in the inert gas arc welding of copper

A study has been made of the effects of welding and material variables on the occurrence of porosity in tungsten inert gas arc welding of copper. The experiments were based on a statistical design and variables included, welding current, welding speed, arc atmosphere composition, inert gas flow rate, weld preparation, and base material. The extent of weld metal porosity was assessed by density measurement and its morphology by X-ray radiography and metallography. In conjunction with this the copper-steam reaction has been investigated under conditions of controlled atmosphere arc melting. The welding experiments have shown that the extent of steam porosity is increased by increased water vapour content of the arc atmosphere, increased oxygen content of the base material and decreased welding speed. The arc melting experiments have shown that the steam reaction occurs in the body of the weld pool and proceeds to an apparent equi1ibrium state appropriate to to its temperature, the hydrogen and oxygen being supplied by the dissociation of water vapour in the arc atmosphere. It has been shown conclusively that nitrogen porosity can occur in the tungsten inert gas arc welding of copper and that this porosity can be eliminated by using filler wires containing small amounts of aluminum and titanium. Since it has been shown to be much more difficult to produce sound butt welds than melt runs it has been concluded that the porosity associated with joint fit up is due to nitrogen entrained into tho arc atmosphere. Clearly atmospheric entrainment would also, to a much lesser extent, involve water vapour. From a practical welding point of view it has thus been postulated that use of a filler wire containing small amounts of aluminum and/or titanium would eliminate both forms of porosity since these elements are both strongJy deoxidising and denitriding.

Late Glacial and Holocene data from sediment cores MD99-2236 and MD99-2256

The Laurentide Ice Sheet (LIS) was a large, dynamic ice sheet in the early Holocene. The glacial events through Hudson Strait leading to its eventual demise are recorded in the well-dated Labrador shelf core, MD99-2236 from the Cartwright Saddle. We develop a detailed history of the timing of ice-sheet discharge events from the Hudson Strait outlet of the LIS during the Holocene using high-resolution detrital carbonate, ice rafted detritus (IRD), d18O, and sediment color data. Eight detrital carbonate peaks (DCPs) associated with IRD peaks and light oxygen isotope events punctuate the MD99-2236 record between 11.5 and 8.0 ka. We use the stratigraphy of the DCPs developed from MD99-2236 to select the appropriate DeltaR to calibrate the ages of recorded glacial events in Hudson Bay and Hudson Strait such that they match the DCPs in MD99-2236. We associate the eight DCPs with H0, Gold Cove advance, Noble Inlet advance, initial retreat of the Hudson Strait ice stream (HSIS) from Hudson Strait, opening of the Tyrrell Sea, and drainage of glacial lakes Agassiz and Ojibway. The opening of Foxe Channel and retreat of glacial ice from Foxe Basin are represented by a shoulder in the carbonate data. DeltaR of 350 years applied to the radiocarbon ages constraining glacial events H0 through the opening of the Tyrell Sea provided the best match with the MD99-2236 DCPs; DeltaR values and ages from the literature are used for the younger events. A very close age match was achieved between the 8.2 ka cold event in the Greenland ice cores, DCP7 (8.15 ka BP), and the drainage of glacial lakes Agassiz and Ojibway. Our stratigraphic comparison between the DCPs in MD99-2236 and the calibrated ages of Hudson Strait/Bay deglacial events shows that the retreat of the HSIS, the opening of the Tyrell Sea, and the catastrophic drainage of glacial lakes Agassiz and Ojibway at 8.2 ka are separate events that have been combined in previous estimates of the timing of the 8.2 ka event from marine records. SW Iceland shelf core MD99-2256 documents freshwater entrainment into the subpolar gyre from the Hudson Strait outlet via the Labrador, North Atlantic, and Irminger currents. The timing of freshwater release from the LIS Hudson Strait outlet in MD99-2236 matches evidence for freshwater forcing and LIS icebergs carrying foreign minerals to the SW Iceland shelf between 11.5 and 8.2 ka. The congruency of these records supports the conclusion of the entrainment of freshwater from the retreat of the LIS through Hudson Strait into the subpolar gyre and provides specific time periods when pulses of LIS freshwater were present to influence climate.

Avaliação das técnicas de soldagem MIG-P CA e MIG-P CC+ aplicadas ao passe de enchimento em liga de alumínio AA5083

For contain beneficial properties, aluminum alloys are gaining more importance in different industrial areas, becoming the subject of study in several academic fields. When related to welding these alloys have some peculiarities that may hinder the union, such as microscopic oxide layer present on the metal surface. The MIG welding process, also known as GMAW, has developed versions that can be effective for welding aluminum. Knowing this, for this paper, two versions of pulsed MIG (CC + and CA) were chosen to evaluate which best suits pass by filling bevel on AA5083 aluminum sheets with 8 and 12 mm thick respectively. Furthermore, two types of wire, ER5087 and ER5183 were evaluated. To evaluate the process and versions of the wires, the high-speed cameras and thermal were used to monitor the metal transfer and the thermal behavior respectively, and the metallographic analysis for macrographic view of the weld beads and non-destructive testing by radiography for observation of possible discontinuities. It was found that the technique of MIG-P CA showed better results ahead of another technique both welding conditions imposed. When connected to the wires, they showed similar results, with uniform cords and seamless

Sistema inteligente para o processamento de imagens digitais intrabucais oclusais

Several are the areas in which digital images are used in solving day-to-day problems. In medicine the use of computer systems have improved the diagnosis and medical interpretations. In dentistry it’s not different, increasingly procedures assisted by computers have support dentists in their tasks. Set in this context, an area of dentistry known as public oral health is responsible for diagnosis and oral health treatment of a population. To this end, oral visual inspections are held in order to obtain oral health status information of a given population. From this collection of information, also known as epidemiological survey, the dentist can plan and evaluate taken actions for the different problems identified. This procedure has limiting factors, such as a limited number of qualified professionals to perform these tasks, different diagnoses interpretations among other factors. Given this context came the ideia of using intelligent systems techniques in supporting carrying out these tasks. Thus, it was proposed in this paper the development of an intelligent system able to segment, count and classify teeth from occlusal intraoral digital photographic images. The proposed system makes combined use of machine learning techniques and digital image processing. We first carried out a color-based segmentation on regions of interest, teeth and non teeth, in the images through the use of Support Vector Machine. After identifying these regions were used techniques based on morphological operators such as erosion and transformed watershed for counting and detecting the boundaries of the teeth, respectively. With the border detection of teeth was possible to calculate the Fourier descriptors for their shape and the position descriptors. Then the teeth were classified according to their types through the use of the SVM from the method one-against-all used in multiclass problem. The multiclass classification problem has been approached in two different ways. In the first approach we have considered three class types: molar, premolar and non teeth, while the second approach were considered five class types: molar, premolar, canine, incisor and non teeth. The system presented a satisfactory performance in the segmenting, counting and classification of teeth present in the images.

Sistema inteligente para o processamento de imagens digitais intrabucais oclusais

Several are the areas in which digital images are used in solving day-to-day problems. In medicine the use of computer systems have improved the diagnosis and medical interpretations. In dentistry it’s not different, increasingly procedures assisted by computers have support dentists in their tasks. Set in this context, an area of dentistry known as public oral health is responsible for diagnosis and oral health treatment of a population. To this end, oral visual inspections are held in order to obtain oral health status information of a given population. From this collection of information, also known as epidemiological survey, the dentist can plan and evaluate taken actions for the different problems identified. This procedure has limiting factors, such as a limited number of qualified professionals to perform these tasks, different diagnoses interpretations among other factors. Given this context came the ideia of using intelligent systems techniques in supporting carrying out these tasks. Thus, it was proposed in this paper the development of an intelligent system able to segment, count and classify teeth from occlusal intraoral digital photographic images. The proposed system makes combined use of machine learning techniques and digital image processing. We first carried out a color-based segmentation on regions of interest, teeth and non teeth, in the images through the use of Support Vector Machine. After identifying these regions were used techniques based on morphological operators such as erosion and transformed watershed for counting and detecting the boundaries of the teeth, respectively. With the border detection of teeth was possible to calculate the Fourier descriptors for their shape and the position descriptors. Then the teeth were classified according to their types through the use of the SVM from the method one-against-all used in multiclass problem. The multiclass classification problem has been approached in two different ways. In the first approach we have considered three class types: molar, premolar and non teeth, while the second approach were considered five class types: molar, premolar, canine, incisor and non teeth. The system presented a satisfactory performance in the segmenting, counting and classification of teeth present in the images.

Environmental controls on bioturbation processes in marine benthic habits

Through bioturbation, the macrofauna mediate chemical, physical and biological processes in marine benthic ecosystems. Because of the importance of bioturbation as ecosystem mediator, various studies have been conducted on bioturbation intensity and depth, and the relation of bioturbation processes to environmental condition and ecosystem state. This thesis builds on those previous studies, using a standard field and analytical protocol and by expanding the geographical scale to three climatic regions along Canada’s East Coast and Arctic margins, the Arctic Archipelago, the coastal Subarctic (Labrador Fjords), and the temperate continental climate zone (Gulf of Maine and adjacent Scotian shelf/slope). This Ph.D. study provides a comprehensive assessment of environmental influences on bioturbation along gradients in latitude and ocean depth. Bioturbation intensity, mixing depth, and bioturbation structures were studied in relation to the quantity and quality of potential food sources (organic matter) and substrate characteristics to gain an understanding of the environmental controls on bioturbation in these regions. The three main research chapters of this thesis are divided based on the contrasting climatic and geographical regions studied. The analytical approach included seabed sampling with a boxcorer, describing the sedimentary fabric and bioturbation structures by X-radiography, estimating bioturbation intensity and depth applying a biodiffusion model to particle tracer profiles of ²¹⁰Pbₓs, ²²⁸Thₓs, ²³⁴Thₓs, and chlorophyll-a, and analyzing benthic organic matter and substrate characteristics. Strong regional and cross-climatic relations of bioturbation processes with combinations of environmental factors were observed. In particular, bioturbation depth and the vertical extent of bioturbation structures responded to the environmental patterns observed and, therefore, represented potentially applicable predictors of environmental conditions and ecosystem state. The results of this Ph.D. study may be further extended to other geographical regions with similar environmental characteristics to predict the effects of benthic habitat alterations through environmental stresses on a global scale. Integrated with biological data produced by fellow CHONe scientists the presented data may provide valuable information about functional roles of macrofaunal species and community traits in marine benthic ecosystems along Canada’s extensive East Coast and Arctic margins.

Data on the biogeochemical cycle of methane in the ocean

Geological, mineralogical and microbiological aspects of the methane cycle in water and sediments of different areas in the oceans are under consideration in the monograph. Original and published estimations of formation- and oxidation rates of methane with use of radioisotope and isotopic methods are given. The role of aerobic and anaerobic microbial oxidation of methane in production of organic matter and in formation of authigenic carbonates is considered. Particular attention is paid to processes of methane transformation in areas of its intensive input to the water column from deep-sea hydrothermal sources, mud volcanoes, and cold methane seeps.

Morfometria dos forames mandibular, mentual e infraorbital de Lobo-guará Chrysocyon brachyurus, Illiger, 1815 aplicada a bloqueios anestésicos

CHAPTER II - The Chrysocyon brachyurus is the biggest South American canid which has a high frequency of dental injuries, both in wild and captivity. Thus, veterinary procedures are necessary to preserve the feeding capacity of hundreds of captive specimens worldwide. The aim of this study was to study the mandibular morphometry of maned wolf with emphasis on the establishment of anatomic references to the anesthetic blockage of the inferior alveolar and mental nerves. Therefore, 15 measurements in 22 hemimandibles of C. brachyurus adults were taken. For extra-oral technique of blockage of the inferior alveolar nerve at the level of the mandibular foramen, it is stated that the needle should be advanced, close to the medial surface of the mandibular ramus, by 11.4 mm perpendiculary from the palpable concavity. Alternatively, the needle can be introduced for 30.4 mm from the angular process at 20-25 degrees angle with the ventral margin. For blocking only the mentual nerve, it is recommended the introduction of needle for 10 mm, close to the lateral aspect of the mandibular body, at the level of the lower first premolar. The mandibular foramen showed similars position, size and symmetry in the maned wolfs specimens examined. The comparison of the data with those available for other carnivores reflects the necessity for determining these anatomical references specifically for each species.

Variations in hip shape are associated with radiographic knee osteoarthritis : cross-sectional and longitudinal analyses of the Johnston County Osteoarthritis Project

Funding was provided in part by the US National Institute of Arthritis and Musculoskeletal and Skin Diseases (NIAMS) K23 AR061406 (Nelson); US National Institutes of Health (NIH)/NIAMS P60AR30701 (Jordan/Renner/Schwartz); US Centers for Disease Control/Association of Schools of Public Health S043 and S3486 (Jordan/Renner); K24-AR04884, P50-AR063043, and P50-AR060752 (Lane); and NIH/National Center for Advancing Translational Sciences KL2TR001109 (Golightly).

Variations in hip shape are associated with radiographic knee osteoarthritis : cross-sectional and longitudinal analyses of the Johnston County Osteoarthritis Project

Funding was provided in part by the US National Institute of Arthritis and Musculoskeletal and Skin Diseases (NIAMS) K23 AR061406 (Nelson); US National Institutes of Health (NIH)/NIAMS P60AR30701 (Jordan/Renner/Schwartz); US Centers for Disease Control/Association of Schools of Public Health S043 and S3486 (Jordan/Renner); K24-AR04884, P50-AR063043, and P50-AR060752 (Lane); and NIH/National Center for Advancing Translational Sciences KL2TR001109 (Golightly).

The use of trauma interprofessional simulated education (TIPSE) to enhance role awareness in the emergency department setting

Peer reviewed

Avaliação do AAM - Active Appearance Model para detecção de regiões de interesse em radiografias carpais na estimativa da idade óssea através do método TW

In several areas of health professionals (pediatricians, nutritionists, orthopedists, endocrinologists, dentists, etc.) are used in the assessment of bone age to diagnose growth disorders in children. Through interviews with specialists in diagnostic imaging and research done in the literature, we identified the TW method - Tanner and Whitehouse as the most efficient. Even achieving better results than other methods, it is still not the most used, due to the complexity of their use. This work presents the possibility of automation of this method and therefore that its use more widespread. Also in this work, they are met two important steps in the evaluation of bone age, identification and classification of regions of interest. Even in the radiography in which the positioning of the hands were not suitable for TW method, the identification algorithm of the fingers showed good results. As the use AAM - Active Appearance Models showed good results in the identification of regions of interest even in radiographs with high contrast and brightness variation. It has been shown through appearance, good results in the classification of the epiphysis in their stages of development, being chosen the average epiphysis finger III (middle) to show the performance. The final results show an average percentage of 90% hit and misclassified, it was found that the error went away just one stage of the correct stage.

Mammography Unit mobile sponsored by YWCA

General note: Title and date provided by Bettye Lane.

Recent developments in computed tomography for urolithiasis: diagnosis and characterization.

Objective. To critically evaluate the current literature in an effort to establish the current role of radiologic imaging, advances in computed tomography (CT) and standard film radiography in the diagnosis, and characterization of urinary tract calculi. Conclusion. CT has a valuable role when utilized prudently during surveillance of patients following endourological therapy. In this paper, we outline the basic principles relating to the effects of exposure to ionizing radiation as a result of CT scanning. We discuss the current developments in low-dose CT technology, which have resulted in significant reductions in CT radiation doses (to approximately one-third of what they were a decade ago) while preserving image quality. Finally, we will discuss an important recent development now commercially available on the latest generation of CT scanners, namely, dual energy imaging, which is showing promise in urinary tract imaging as a means of characterizing the composition of urinary tract calculi.