Previous exposure to musical auditory stimulation immediately influences the cardiac autonomic responses to the postural change maneuver in women

Background Chronic exposure to musical auditory stimulation has been reported to improve cardiac autonomic regulation. However, it is not clear if music acutely influences it in response to autonomic tests. We evaluated the acute effects of music on heart rate variability (HRV) responses to the postural change maneuver (PCM) in women. Method We evaluated 12 healthy women between 18 and 28 years old and HRV was analyzed in the time (SDNN, RMSSD, NN50 and pNN50) and frequency (LF, HF and LF/HF ratio) domains. In the control protocol, the women remained at seated rest for 10 minutes and quickly stood up within three seconds and remained standing still for 15 minutes. In the music protocol, the women remained at seated rest for 10 minutes, were exposed to music for 10 minutes and quickly stood up within three seconds and remained standing still for 15 minutes. HRV was recorded at the following time: rest, music (music protocol) 0–5, 5–10 and 10–15 min during standing. Results In the control protocol the SDNN, RMSSD and pNN50 indexes were reduced at 10–15 minutes after the volunteers stood up, while the LF (nu) index was increased at the same moment compared to seated rest. In the protocol with music, the indexes were not different from control but the RMSSD, pNN50 and LF (nu) were different from the music period. Conclusion Musical auditory stimulation attenuates the cardiac autonomic responses to the PCM.

U-Pb dating by zircon dissolution method using chemical abrasion

Chemical abrasion was carried out on zircons grains of the Temora II standard for U-Pb dating prior to analyses using in situ Laser Ablation-MultiCollector Ion Coupled Plasma Mass Spectrometer (LA-ICPMS) followed by the Isotope Dissolution Thermal Ionization Mass Spectrometer (ID-TIMS) method. The proposed methodology was herein applied in order to reduce primarily the effects of secondary Pb loss, the presence of common lead and/or silicate impurities. Nine Temora II zircon grains were analyzed by the laser ablation method yielding an age of 418.3±4.3 Ma. Zircon grains of a same population were separated for chemical abrasion before dissolution and mass spectrometry analyses. Six fractions of them were separated for isotope dissolution using 235U-205Pb mixed spike after we have checked and assured the laboratory conditions of low blank values for total Pb of less than 2 pg/g. The obtained U-Pb zircon age by the ID-TIMS method was 415.7±1.8 Ma (error 0.43 %) based on four successful determinations. The results are consistent with the published ages for the Temora diorite (Temora I â 416.75±1.3 Ma; Temora II â 416.78±0.33 Ma) and established as 416±0.33 Ma. The technique is thus recommended for high precision U-Pb zircon analyses (error < 1 %), mainly for high resolution stratigraphic studies of Phanerozoic sequences.

Crescimento inicial de Merremia cissoides, Neonotonia wightii e Stizolobium aterrimum

Este trabalho foi desenvolvido com o objetivo de avaliar o crescimento inicial de três espécies de plantas daninhas que são problemas emergentes para a cultura da cana-de-açúcar: Neonotonia wightii, Stizolobium aterrimum e Merremia cissoides. O delineamento experimental adotado foi inteiramente casualizado, com sete tratamentos e quatro repetições, para cada espécie estudada. Durante todo o experimento foram realizadas sete avaliações de crescimento (tratamentos), espaçadas de 15 dias, totalizando 105 dias de ciclo. As espécies tiveram suas variáveis analisadas, como a área foliar (Af; cm² por planta). Posteriormente, o material amostrado foi seco em estufa, quando se mensurou também a matéria seca (g por planta) das raízes (Mr), da parte aérea (Ma) e total (Mt). O acúmulo de matéria seca observado mostra a elevada capacidade que a planta daninha S. aterrimum possui de produzir fitomassa. Ao final do experimento, observou-se estabilização da matéria seca da parte aérea (Ma) nas três espécies estudadas, acompanhada pela variável matéria seca total (Mt), com estabilização no final do experimento. Para S. aterrimum, obteve-se maior taxa de crescimento inicial e acúmulo de matéria seca total (Mt), além de maior acúmulo de área foliar (Af). N. wightii mostrou ser uma espécie de crescimento inicial lento, quando comparada com as outras estudadas. M. cissoides apresentou acúmulo significativo de matéria seca total (Mt), quando comparado com as outras espécies.

Stochastic quantization of the spherical model and supersymmetry.

In this work, we reported some results about the stochastic quantization of the spherical model. We started by reviewing some basic aspects of this method with emphasis in the connection between the Langevin equation and the supersymmetric quantum mechanics, aiming at the application of the corresponding connection to the spherical model. An intuitive idea is that when applied to the spherical model this gives rise to a supersymmetric version that is identified with one studied in Phys. Rev. E 85, 061109, (2012). Before investigating in detail this aspect, we studied the stochastic quantization of the mean spherical model that is simpler to implement than the one with the strict constraint. We also highlight some points concerning more traditional methods discussed in the literature like canonical and path integral quantization. To produce a supersymmetric version, grounded in the Nicolai map, we investigated the stochastic quantization of the strict spherical model. We showed in fact that the result of this process is an off-shell supersymmetric extension of the quantum spherical model (with the precise supersymmetric constraint structure). That analysis establishes a connection between the classical model and its supersymmetric quantum counterpart. The supersymmetric version in this way constructed is a more natural one and gives further support and motivations to investigate similar connections in other models of the literature.

Biometanazione della frazione organica di rifiuti solidi urbani da raccolta indifferenziata mediante codigestione con refluo zootecnico o addizione di solfuro di sodio

Il presente elaborato è stato finalizzato allo sviluppo di un processo di digestione anaerobica della frazione organica dei rifiuti solidi urbani (FORSU oppure, in lingua inglese OFMSW, Organic Fraction of Municipal Solid Waste) provenienti da raccolta indifferenziata e conseguente produzione di biogas da impiegarsi per il recupero energetico. Questo lavoro rientra nell’ambito di un progetto, cofinanziato dalla Regione Emilia Romagna attraverso il Programma Regionale per la Ricerca Industriale, l’Innovazione e il Trasferimento Tecnologico (PRRIITT), sviluppato dal Dipartimento di Chimica Applicata e Scienza dei Materiali (DICASM) dell’Università di Bologna in collaborazione con la Facoltà di Ingegneria dell’Università di Ferrara e con la società Recupera s.r.l. che applicherà il processo nell’impianto pilota realizzato presso il proprio sito di biostabilizzazione e compostaggio ad Ostellato (FE). L’obiettivo è stato la verifica della possibilità di impiegare la frazione organica dei rifiuti indifferenziati per la produzione di biogas, e in particolare di metano, attraverso un processo di digestione anaerobica previo trattamento chimico oppure in codigestione con altri substrati organici facilmente fermentabili. E’ stata inoltre studiata la possibilità di impiego di reattori con biomassa adesa per migliorare la produzione specifica di metano e diminuire la lag phase. Dalla sperimentazione si può concludere che è possibile giungere allo sviluppo di metano dalla purea codigerendola assieme a refluo zootecnico. Per ottenere però produzioni significative la quantità di solidi volatili apportati dal rifiuto non deve superare il 50% dei solidi volatili complessivi. Viceversa, l’addizione di solfuri alla sola purea si è dimostrata ininfluente nel tentativo di sottrarre gli agenti inibitori della metanogenesi. Inoltre, l’impiego di supporti di riempimento lavorando attraverso processi batch sequenziali permette di eliminare, nei cicli successivi al primo, la lag phase dei batteri metanogeni ed incrementare la produzione specifica di metano.

The use of remote sensing imagery for monitoring recovery in the aftermath of a natural disaster: the Hurricane Katrina Case

Although Recovery is often defined as the less studied and documented phase of the Emergency Management Cycle, a wide literature is available for describing characteristics and sub-phases of this process. Previous works do not allow to gain an overall perspective because of a lack of systematic consistent monitoring of recovery utilizing advanced technologies such as remote sensing and GIS technologies. Taking into consideration the key role of Remote Sensing in Response and Damage Assessment, this thesis is aimed to verify the appropriateness of such advanced monitoring techniques to detect recovery advancements over time, with close attention to the main characteristics of the study event: Hurricane Katrina storm surge. Based on multi-source, multi-sensor and multi-temporal data, the post-Katrina recovery was analysed using both a qualitative and a quantitative approach. The first phase was dedicated to the investigation of the relation between urban types, damage and recovery state, referring to geographical and technological parameters. Damage and recovery scales were proposed to review critical observations on remarkable surge- induced effects on various typologies of structures, analyzed at a per-building level. This wide-ranging investigation allowed a new understanding of the distinctive features of the recovery process. A quantitative analysis was employed to develop methodological procedures suited to recognize and monitor distribution, timing and characteristics of recovery activities in the study area. Promising results, gained by applying supervised classification algorithms to detect localization and distribution of blue tarp, have proved that this methodology may help the analyst in the detection and monitoring of recovery activities in areas that have been affected by medium damage. The study found that Mahalanobis Distance was the classifier which provided the most accurate results, in localising blue roofs with 93.7% of blue roof classified correctly and a producer accuracy of 70%. It was seen to be the classifier least sensitive to spectral signature alteration. The application of the dissimilarity textural classification to satellite imagery has demonstrated the suitability of this technique for the detection of debris distribution and for the monitoring of demolition and reconstruction activities in the study area. Linking these geographically extensive techniques with expert per-building interpretation of advanced-technology ground surveys provides a multi-faceted view of the physical recovery process. Remote sensing and GIS technologies combined to advanced ground survey approach provides extremely valuable capability in Recovery activities monitoring and may constitute a technical basis to lead aid organization and local government in the Recovery management.

Magnetohydrodynamic Effects On Mixed Convection Flows In Channels And Ducts

This work focuses on magnetohydrodynamic (MHD) mixed convection flow of electrically conducting fluids enclosed in simple 1D and 2D geometries in steady periodic regime. In particular, in Chapter one a short overview is given about the history of MHD, with reference to papers available in literature, and a listing of some of its most common technological applications, whereas Chapter two deals with the analytical formulation of the MHD problem, starting from the fluid dynamic and energy equations and adding the effects of an external imposed magnetic field using the Ohm's law and the definition of the Lorentz force. Moreover a description of the various kinds of boundary conditions is given, with particular emphasis given to their practical realization. Chapter three, four and five describe the solution procedure of mixed convective flows with MHD effects. In all cases a uniform parallel magnetic field is supposed to be present in the whole fluid domain transverse with respect to the velocity field. The steady-periodic regime will be analyzed, where the periodicity is induced by wall temperature boundary conditions, which vary in time with a sinusoidal law. Local balance equations of momentum, energy and charge will be solved analytically and numerically using as parameters either geometrical ratios or material properties. In particular, in Chapter three the solution method for the mixed convective flow in a 1D vertical parallel channel with MHD effects is illustrated. The influence of a transverse magnetic field will be studied in the steady periodic regime induced by an oscillating wall temperature. Analytical and numerical solutions will be provided in terms of velocity and temperature profiles, wall friction factors and average heat fluxes for several values of the governing parameters. In Chapter four the 2D problem of the mixed convective flow in a vertical round pipe with MHD effects is analyzed. Again, a transverse magnetic field influences the steady periodic regime induced by the oscillating wall temperature of the wall. A numerical solution is presented, obtained using a finite element approach, and as a result velocity and temperature profiles, wall friction factors and average heat fluxes are derived for several values of the Hartmann and Prandtl numbers. In Chapter five the 2D problem of the mixed convective flow in a vertical rectangular duct with MHD effects is discussed. As seen in the previous chapters, a transverse magnetic field influences the steady periodic regime induced by the oscillating wall temperature of the four walls. The numerical solution obtained using a finite element approach is presented, and a collection of results, including velocity and temperature profiles, wall friction factors and average heat fluxes, is provided for several values of, among other parameters, the duct aspect ratio. A comparison with analytical solutions is also provided, as a proof of the validity of the numerical method. Chapter six is the concluding chapter, where some reflections on the MHD effects on mixed convection flow will be made, in agreement with the experience and the results gathered in the analyses presented in the previous chapters. In the appendices special auxiliary functions and FORTRAN program listings are reported, to support the formulations used in the solution chapters.

MCAO for Extremely Large Telescopes: the cases of LBT and E-ELT

Several MCAO systems are under study to improve the angular resolution of the current and of the future generation large ground-based telescopes (diameters in the 8-40 m range). The subject of this PhD Thesis is embedded in this context. Two MCAO systems, in dierent realization phases, are addressed in this Thesis: NIRVANA, the 'double' MCAO system designed for one of the interferometric instruments of LBT, is in the integration and testing phase; MAORY, the future E-ELT MCAO module, is under preliminary study. These two systems takle the sky coverage problem in two dierent ways. The layer oriented approach of NIRVANA, coupled with multi-pyramids wavefront sensors, takes advantage of the optical co-addition of the signal coming from up to 12 NGS in a annular 2' to 6' technical FoV and up to 8 in the central 2' FoV. Summing the light coming from many natural sources permits to increase the limiting magnitude of the single NGS and to improve considerably the sky coverage. One of the two Wavefront Sensors for the mid- high altitude atmosphere analysis has been integrated and tested as a stand- alone unit in the laboratory at INAF-Osservatorio Astronomico di Bologna and afterwards delivered to the MPIA laboratories in Heidelberg, where was integrated and aligned to the post-focal optical relay of one LINC-NIRVANA arm. A number of tests were performed in order to characterize and optimize the system functionalities and performance. A report about this work is presented in Chapter 2. In the MAORY case, to ensure correction uniformity and sky coverage, the LGS-based approach is the current baseline. However, since the Sodium layer is approximately 10 km thick, the articial reference source looks elongated, especially when observed from the edge of a large aperture. On a 30-40 m class telescope, for instance, the maximum elongation varies between few arcsec and 10 arcsec, depending on the actual telescope diameter, on the Sodium layer properties and on the laser launcher position. The centroiding error in a Shack-Hartmann WFS increases proportionally to the elongation (in a photon noise dominated regime), strongly limiting the performance. To compensate for this effect a straightforward solution is to increase the laser power, i.e. to increase the number of detected photons per subaperture. The scope of Chapter 3 is twofold: an analysis of the performance of three dierent algorithms (Weighted Center of Gravity, Correlation and Quad-cell) for the instantaneous LGS image position measurement in presence of elongated spots and the determination of the required number of photons to achieve a certain average wavefront error over the telescope aperture. An alternative optical solution to the spot elongation problem is proposed in Section 3.4. Starting from the considerations presented in Chapter 3, a first order analysis of the LGS WFS for MAORY (number of subapertures, number of detected photons per subaperture, RON, focal plane sampling, subaperture FoV) is the subject of Chapter 4. An LGS WFS laboratory prototype was designed to reproduce the relevant aspects of an LGS SH WFS for the E-ELT and to evaluate the performance of different centroid algorithms in presence of elongated spots as investigated numerically and analytically in Chapter 3. This prototype permits to simulate realistic Sodium proles. A full testing plan for the prototype is set in Chapter 4.

La qualità del servizio sportivo come strumento di miglioramento del benessere psico-fisico dell'utente

La ricerca approfondisce le modalità  di applicazione degli standard di qualità  nell'ambito del servizio sportivo, qualità  certificata attraverso sistemi convenzionali o auto verificata attraverso strumenti quali carte di servizio. L'applicazione e verifica dei sistemi di qualità  ad un servizio, seppur non considerato pubblico ma comunque di interesse generale, deve essere messa in relazione con i risultati che il servizio stesso si prefigge sia dal punto di vista del privato (o pubblico) che gestisce ed esercita l'attività  sportiva, sia dal punto di vista del cittadino che lo utilizza. Pertanto la ricerca è stata dedicata all'incidenza della qualità  nei miglioramenti del benessere psico-fisico dell'utente e all'eventuale efficacia della stessa come strumento di marketing per la diffusione del servizio. Sono state prese in esame tre diverse realtà  sportive, tre piscine. Due delle quali, dopo una prima rilevazione esplorativa, si sono dotate di una Carta dei Servizi. La terza piscina è invece gestita da una società  certificata ISO 9001. Sono stati proposti ed elaborati oltre 800 questionari dai quali sono emerse interessanti indicazioni su quanto e come la qualità  del servizio sia stato percepito dall'utente sotto forma di miglioramento del proprio stato psico-fisico ma anche di come sia ritenuta indispensabile una attenzione del gestore verso l'utente affinchè egli possa considerare utile l'attività  motoria dal punto di vista del miglioramento del proprio benessere. Più in particolare, attraverso l'utilizzo dell'analisi fattoriale prima e di modelli Lisrel poi, si è ottenuta una riduzione della complessità  del numero di fattori che spiegano il fenomeno. Questi fattori sono stati messi in correlazione con il livello di soddisfazione complessiva degli utenti e, dalle due rilevazioni per le quali il modello Lisrel ha restituito dati attendibili, è emerso come il fattore "servizi per gli utenti", comprendente aspetti quali lo spazio in acqua e la comodità  degli spogliatoi, sia quello che ha una maggior correlazione con la soddisfazione complessiva. La Carta dei Servizi, pur ritenuta utile dagli utenti che la conoscono, risulta uno strumento poco conosciuto ed in generale privo di appeal anche dal punto di vista del marketing. Nella percezione dell'utente questo strumento non contribuisce al miglioramento del proprio stato psico-fisico. E' interessante rilevare, invece, che gli utenti che conoscono la Certificazione di qualità  hanno una miglior percezione del servizio. In generale i molteplici interessi commerciali legati alle certificazioni o "autocertificazioni" hanno generato, in questi ultimi anni, confusione nelle società  sportive e negli enti che gestiscono impianti sportivi tra il concetto di qualità  (come cultura e occasione di miglioramento) e quello di "certificazione di qualità". In tale contesto "l'apparire" è divenuto più importante dell'"essere" perchè, la maggiore attenzione all'uso di tecniche piuttosto che all'approfondimento dei principi manageriali grazie ai quali è possibile fare qualità , ha finito per banalizzarne il concetto. Ma se il cliente/utente (interno o esterno) è insoddisfatto nonostante il rispetto di standard e specifiche da parte dell'azienda si può ancora parlare di qualità ?

Untersuchungen über Wechselwirkungen zwischen Proteinen der Leber und dem großen Hüllprotein des Hepatitis-B-Virus

Zusammenfassung:Im Infektionszyklus des Hepatitis-B-Virus spielt das große L-Hüllprotein mit seiner einzigartigen PräS1-Domäne eine zentrale Rolle. Es vermittelt die Bindung und Aufnahme in die Leberzelle, die Verpackung der Nukleokapside in die Virushülle, die Regulation der cccDNA-Amplifikation und eine transkriptionelle Aktivierung in der Wirtszelle. Zur Erfüllung seiner vielfältigen Aufgaben benötigt das L-Protein Unterstützung durch Wirtzellfaktoren, von denen einige im Rahmen dieser Untersuchung durch Verwendung von PräS1-Konstrukten als Fängerproteine im Hefe-Zwei-Hybrid-System identifiziert wurden. Mehrere Klone, die im Hefe-Zwei-Hybrid-Test mit dem C-terminalen PräS1-Fängerprotein (Aminosäure 44-108) isoliert worden waren, enthielten Teile der cDNA von gamma2-Adaptin, einem mutmaßlichen Mitglied der Clathrin-Adaptor-Proteine. Diese sind für intrazelluläre Membrantransportprozesse mittels clathrinumhüllter Vesikel verantwortlich. Unter den interagierenden Klonen, die mit dem N-terminalen Konstrukt des L-Proteins (Aminosäure 1-70) isoliert worden waren, befand sich überproportional häufig eine cDNA, die der schweren Kette H4 der Inter-Alpha-Trypsin-Inhibitor-Familie homolog war. H4 besitzt vermutlich bei der 'Akute-Phase-Reaktion', die Entzündungen folgt, und bei der Stabilisierung der extrazellulären Matrix physiologische Bedeutung. Weitere Klone kodierten für die Serinprotease C1r. Diese ist Bestandteil des C1-Komplex, der ersten Komponente des klassischen Komplementsystems. Die Spezifität der Bindung zwischen den positiven Klonen und der PräS1-Domäne wurde in weiteren biochemischen Interaktionstests bestätigt, sodaß H4, C1r und gamma2-Adaptin als Wirtszellfaktoren in der Physiologie des Hepatitis-B-Virus wahrscheinlich eine Rolle spielen.Abstract:Little is known about host cell factors necessary for hepatitis B virus assembly and infectivity. Central to virogenesis is the large L envelope protein that mediates hepatocyte receptor binding, envelopment of viral capsids, regulation of supercoiled DNA amplification and transcriptional transactivation. To assess its multiple functions and host-protein assistance involved, we here initiated a yeast two-hybrid screen using the L-specific preS1 domain as bait to screen a human liver cDNA library for L-interacting proteins. One of the most prominent cDNAs interacting with aminoacid sequence 44-108 of L-protein encodes for gamma2-adaptin, a novel clathrin adaptor-related protein responsible for protein sorting and trafficking. Among the clones interacting with the N-terminal construct of L-protein (aminoacid sequence 1-70), a frequently isolated cDNA corresponds to the gene for inter-alpha-trypsin family heavy chain H4, likely to be involved in acute inflammatory phase response and stabilization of extracellular matrices. Some other interacting clones were found to carry the cDNA for the serine protease C1r, a subunit of the C1 complex which initiates the classical complement cascade. The specificity of the interaction between the positive clones and the preS1 domain was further confirmed in independent biochemical experiments. Taken together, the results suggest a role for H4, C1r and gamma2-adaptin as host-cell factors in L-mediated process of viral biogenesis and/or pathogenesis.

Entwicklung einer Enzymimmunoelektrode zur Bestimmung von Atrazin in Wasser

ZusammenfassungIn der vorliegenden Arbeit ist eine Enzymimmunoelektrode zur Bestimmung von Atrazin in Wasser entwickelt worden. Die Motivation war, einen Immunoassay zu entwickeln, der ohne die speziellen Geräte, wie einen EIA-Reader, durchgeführt werden konnte. Dafür müssen drei Änderungen vorgenommen werden. Es muß das Detektorsystem EIA-Reader zur Meßwerterfassung ersetzt werden, und damit muß die nur im EIA-Reader verwendbare Mikrotiterplatte ausgetauscht werden. Als drittes muß der Immunoassay dem neuen Detektorsystem angepaßt werden. Eine pH-Elektrode wurde anstelle des EIA-Readers benutzt. Als Enzym, das eine pH-Änderung induziert, wurde Lactamase ausgewählt. Als Festphase wurden anstelle der Mikrotiterplatte Polystyrolmikropartikel (PSMP) verwendet. Die Entwicklung der Enzymimmunoelektrode erfolgte in drei Schritten: Entwicklung des Immunoassays für Atrazin unter Verwendung von Lactamase, Übertragung auf die Festphase PSMP und Einsatz der pH-Elektrode als Detektorsystem. Zuerst wurden Tracer mit dem Enzym Lactamase hergestellt. Als Haptene wurden 2-Chlor-4-(isopropylamino)-6-[(1-carboxypent-5-yl)amino]-s-Triazin (iPr/Cl/C6), Di-Chloratrazin und Di-Chlorsimazin verwendet. Es wurden unterschiedliche Testmittelpunkte im Immunoassay erreicht, (iPr/Cl/C6 I50 = 1.22µg/L; Dichloratrazin I50 = 0.27µg/L; Di-Chlorsimazin I50 = 0.12µg/L). Aufgrund der nur mäßigen Stabilität der Tracer unter Verwendung der Di-Chlorderivate wurde auf deren Verwendung bei der Entwicklung der Immunoelektrode verzichtet.Im zweiten Schritt erfolgte die Übertragung auf PSMP. Die Verwendung der PSMP hatte außer einer Verbesserung des Testmittelpunktes auf 1.00µg/L noch den Vorteil, daß die benötigten Mengen an Antikörper verringert werden konnten.Danach wurde die pH-Elektrode als Signalwandler zur Bestimmung des Atrazins eingesetzt. Unter Verwendung der pH-Elektrode konnte der bisher niedrigste Testmittelpunkt (I50 = 0.005µg/L) zur Bestimmung von Atrazin erreicht werden.

Simulazione CAD dell'impingement articolare con protesi d'anca convenzionale e a conservazione di collo in funzione dei principali parametri chirurgici e anatomici

Lo scopo del lavoro è quello di verificare tramite software CAD l’influenza dei principali parametri chirurgici e anatomici sul Range Of Motion (ROM). Sono stati costruiti 5 modelli, uno di articolazione sana(Senza Protesi), uno di protesi Convenzionale e tre di protesi Conservative o a Conservazione (Totale, Media e Bassa Conservazione). Per tutti i modelli sono state simulate le rotazioni di base e i cosiddetti movimenti critici, ovvero quei movimenti a rischio di lussazione. Le prove sono state eseguite per teste da 28-,32-,36-,40mm di diametro, e con la coppa orientata di 45° in abduzione e 15° gradi in antiversione prima e successivamente di 45° e 0°. Inoltre, per verificare l’influenza dell’offset sul ROM, sono stati costruiti e simulati i movimenti per altri 5 modelli che non conservassero il vincolo del mantenere l’offset anatomico. Variando il diametro della testa si registrano differenze apprezzabili in termini di ROM solo per i movimenti di Estensione e Abduzione per il modello di Protesi Convenzionale e di Abduzione per il modello a Bassa Conservazione. Variando il livello di resezione del collo si è visto come per i modelli di protesi a Media Conservazione, Bassa Conservazione e Convenzionale si misurano angoli superiori a quello del riferimento tratto dalla Letteratura. Diversamente per il modello di Protesi a Totale Conservazione i valori ottenuti per alcuni movimenti sono inferiori, poiché limitati da un contatto di tipo c-b. Le simulazioni dei movimenti critici confermano la tendenza di un ROM accettabile per i modelli di protesi a Bassa Conservazione e di protesi Convenzionale, i quali forniscono escursioni angolari sempre superiori a quelle prese come riferimento dalla Letteratura. Invece, le protesi a Totale e Media Conservazione forniscono valori inferiori al riferimento per i movimenti di Pivot e Roll, essendo limitati dall’antiversione della coppa (movimenti di ExtraRotazione e contatto c-b). Variando la posizione della coppa a 45°/0° i due movimenti Critici Pivot e Roll migliorano per i modelli a Totale e Media Conservazione, tornando in linea con il riferimento. Riguardo l’offset si nota come più si avvicina a quello anatomico che misura 46,2mm (da 37 a 44mm), più si riscontra un aumento in termini di ROM.

Laser guide stars wavefront sensors for the EELT

The Adaptive Optics is the measurement and correction in real time of the wavefront aberration of the star light caused by the atmospheric turbulence, that limits the angular resolution of ground based telescopes and thus their capabilities to deep explore faint and crowded astronomical objects. The lack of natural stars enough bright to be used as reference sources for the Adaptive Optics, over a relevant fraction of the sky, led to the introduction of artificial reference stars. The so-called Laser Guide Stars are produced by exciting the Sodium atoms in a layer laying at 90km of altitude, by a powerful laser beam projected toward the sky. The possibility to turn on a reference star close to the scientific targets of interest has the drawback in an increased difficulty in the wavefront measuring, mainly due to the time instability of the Sodium layer density. These issues are increased with the telescope diameter. In view of the construction of the 42m diameter European Extremely Large Telescope a detailed investigation of the achievable performances of Adaptive Optics becomes mandatory to exploit its unique angular resolution . The goal of this Thesis was to present a complete description of a laboratory Prototype development simulating a Shack-Hartmann wavefront sensor using Laser Guide Stars as references, in the expected conditions for a 42m telescope. From the conceptual design, through the opto-mechanical design, to the Assembly, Integration and Test, all the phases of the Prototype construction are explained. The tests carried out shown the reliability of the images produced by the Prototype that agreed with the numerical simulations. For this reason some possible upgrades regarding the opto-mechanical design are presented, to extend the system functionalities and let the Prototype become a more complete test bench to simulate the performances and drive the future Adaptive Optics modules design.

Oltre il limite invalicabile. Procedure, piani, progetti sostenibili per le aree militari dismissibili di Piacenza

The research project concerns the restoration of military real estate, starting from the procedures in progress in Italy related to dismission, with particular emphasis for Piacenza and the case study of Caserme Bixio and Nicolai (Comparto Nord/San Sisto-Cittadella). The work is aimed at defining the relationship between urban planning and rehabilitation of dismissed military areas, in order to create a synergic effort capable to face the transformation of these sites and their integration into the urban tissue. The results obtained from the various recordings performed in Italy and in USA during the preparation of this thesis may help to find a new possible scenario for the Comparto Nord and its historic buildings.

Virus-Wirt-Interaktionen bei Hepatitis-B-Virus-Infektionen: Die Rolle von Gamma2-Adaptin

Mit etwa 350 Millionen chronisch-infizierten Menschen gehört die Hepatitis-B neben der Tuberkulose und AIDS zu den häufigsten Infektionskrankheiten der Welt. Der einzig sichere Schutz vor dem bis zur Leberzirrhose persistierenden Virus bietet eine vorbeugende Impfung. Eine angemessene Therapie chronisch-erkrankter Patienten ist durch die Unkenntnis über viele Bereiche des HBV-Lebenszyklus nur eingeschränkt möglich. Gegenstand dieser Arbeit war vor allem etwas Licht in das Wechselspiel zwischen HBV und der Wirtszelle zu bringen und zelluläre Komponenten und Mechanismen zu identifizieren, die am Sortierungs- und Transportmechanismus viraler Substrukturen zur sogenannten Assembly-Plattform beteiligt sind, um dort die Freisetzung des Virus zu initiieren. Mit der vorliegenden Arbeit habe ich Methoden der Zellbiologie, Mikrobiologie, Molekularbiologie und Virologie vereint, um neue Einblicke in den HBV-Lebenszyklus zu gewinnen. Für die Ausschleusung von HBV wird seither der konstitutive Weg der Sekretion angenommen. In Anlehnung an den Mechanismus umhüllter RNA-Viren kann die Hypothese aufgestellt werden, dass das MVB (Multivesicular Body) im Prozess der HBV-Freisetzung beteiligt sein könnte. Die Freisetzung des Hepatitis-B-Virus aus einer infizierten Zelle ist ein streng organisierter Prozess, der sowohl das HBV-Coreprotein als auch die HBV-Hüllproteine zu benötigen scheint. (max. 5.000 Zeichen)Inhaltszusammenfassung in einer weiteren Sprache deutschenglischfranzösischrussischmehrsprachigsonst.Ausgangspunkt der Arbeit war eine spezifische Interaktion des großen HBV-Hüllproteins (L) mit einem neuen Mitglied der Adaptor-Protein-Komplex-Familie (AP-Komplex), dem g2?Adaptin (Hartmann-Stühler und Prange, 2001), das mutmaßlich an endosomalen Sortierungs- und Transportprozessen beteiligt ist. In Analogie zur Funktionsweise von Adaptin-Molekülen wurde vom g2-Adaptin eine Rolle in der Initiation und Steuerung der Sprossung und Freisetzung von HBV vermutet. Die im Rahmen dieser Arbeit erweiterte Charakterisierung der g2/L-Interaktion zeigte zum einen, dass die Ohrdomäne des Adaptins für die Interaktion essentiell ist und zum anderen, dass die Rekrutierung des Adaptins durch das L-Protein zu cis-Golgi-Strukturen innerhalb kleiner Transportvesikel entlang des Nukleus (perinukleär) erfolgt. Erste Ergebnisse dieser Arbeit deuteten bereits an, dass das virale Coreprotein mit demselben Adaptorprotein zu interagieren vermag. Für die g2/Core-Interaktion erwies sich in Folgearbeiten die Kopfregion des g2-Adaptins als die entscheidende Bindungsdomäne (Rost et al., 2006). Sowohl eine funktionelle Inaktivierung des g2-Adaptins durch RNA-Interferenz als auch eine g2-Adaptin- Überexpression störten die Virusmontage in späten Phasen der Morphogenese. Während ein g2-Adaptin-Überschuss die HBV-Produktion indirekt durch die Induktion dysfunktioneller endosomaler Kompartimente blockierte, verhinderte der siRNA-induzierte g2-Adaptin-Verlust die späte Ausschleusung des Virus aus der Zelle. Das Silencing von g2-Adaptin zeigte dabei weder einen Einfluss auf endosomale Strukturen noch auf die Freisetzung subviraler Partikel (Viren ohne Genom). Demzufolge scheinen sich die Mechanismen der Produktion von subviralen und viralen HBV-Partikeln bezüglich ihrer Anforderungen an Zellfunktionen und Transportwegen deutlich voneinander zu unterscheiden. Es konnten erste Hinweise darauf gefunden werden, dass die Virusmontage an endosomalen Kompartimenten (zum Beispiel dem MVB) erfolgen könnte, was durch bereits weitergeführte Untersuchungen bestätigt werden konnte (Lambert et al., J Virol, epub ahead of print). Darüber hinaus ist inzwischen bekannt, dass das Hepatitis-B-Virus für den Zusammenbau und die Freisetzung nicht nur das Adaptor-verwandte g2-Adaptin, sondern auch die endosomale Ubiquitin Ligase Nedd4, wahrscheinlich in Zusammenhang mit Ubiquitin selbst (Rost et al., 2006), benötigt. Eine Untersuchung dieser weiterführenden Aspekte war jedoch nicht mehr Inhalt dieser Arbeit. Insgesamt weisen die Daten darauf hin, dass die Sortierung und der Transport der Substrukturen des Hepatitis-B-Virus durch den MVB-Komplex zu erfolgen scheint. Dabei könnte das g2-Adaptin mit Hilfe einer Reihe von Kofaktoren (wie zum Beispiel Nedd4, Ubiquitin, etc.) eine entscheidende Rolle an der Sortierung und Anbindung des viralen L- und Coreproteins an die Assembly-Plattform spielen. Doch der genaue Mechanismus, welcher große Ähnlichkeit mit dem umhüllter RNA-Viren (wie zum Beispiel HIV-1) aufweist, bleibt noch ungeklärt. Ob weitere zelluläre Kofaktoren an der HBV-Sprossung und Freisetzung beteiligt sind, bleibt ebenfalls unbekannt und bedarf weiterer Untersuchungen.