Reinforcing silk scaffolds with silk particles

Silk fibroin is a useful protein polymer for biomaterials and tissue engineering. In this work, porogen leached scaffolds prepared from aqueous and HFIP silk solutions were reinforced through the addition of silk particles. This led to about 40 times increase in the specific compressive modulus and the yield strength of HFIP-based scaffolds. This increase in mechanical properties resulted from the high interfacial cohesion between the silk matrix and the reinforcing silk particles, due to partial solubility of the silk particles in HFIP. The porosity of scaffolds was reduced from ≈90% (control) to ≈75% for the HFIP systems containing 200% particle reinforcement, while maintaining pore interconnectivity. The presence of the particles slowed the enzymatic degradation of silk scaffolds.

Ingrowth of human mesenchymal stem cells into porous silk particle reinforced silk composite scaffolds : an in vitro study

Silk fibroin protein is biodegradable and biocompatible, exhibiting excellent mechanical properties for various biomedical applications. However, porous three-dimensional (3-D) silk fibroin scaffolds, or silk sponges, usually fall short in matching the initial mechanical requirements for bone tissue engineering. In the present study, silk sponge matrices were reinforced with silk microparticles to generate protein-protein composite scaffolds with desirable mechanical properties for in vitro osteogenic tissue formation. It was found that increasing the silk microparticle loading led to a substantial increase in the scaffold compressive modulus from 0.3 MPa (non-reinforced) to 1.9 MPa for 1:2 (matrix:particle) reinforcement loading by dry mass. Biochemical, gene expression, and histological assays were employed to study the possible effects of increasing composite scaffold stiffness, due to microparticle reinforcement, on in vitro osteogenic differentiation of human mesenchymal stem cells (hMSCs). Increasing silk microparticle loading increased the osteogenic capability of hMSCs in the presence of bone morphogenic protein-2 (BMP-2) and other osteogenic factors in static culture for up to 6 weeks. The calcium adsorption increased dramatically with increasing loading, as observed from biochemical assays, histological staining, and microcomputer tomography (μCT) analysis. Specifically, calcium content in the scaffolds increased by 0.57, 0.71, and 1.27 mg (per μg of DNA) from 3 to 6 weeks for matrix to particle dry mass loading ratios of 1:0, 1:1, and 1:2, respectively. In addition, μCT imaging revealed that at 6 weeks, bone volume fraction increased from 0.78% for non-reinforced to 7.1% and 6.7% for 1:1 and 1:2 loading, respectively. Our results support the hypothesis that scaffold stiffness may strongly influence the 3-D in vitro differentiation capabilities of hMSCs, providing a means to improve osteogenic outcomes.

Species overlap, speciation and the evolution of aggregation pheromones in bark beetles

Theoretical predictions suggest that species-specific signals used in the attraction of mates should evolve to reduce the risk of mismating and hybridization. These predictions lead to the hypothesis that the signals of spatially overlapping (i.e. sympatric or syntopic) species should differ more substantially than those of non-overlapping species. Earlier studies have tested this prediction for auditory and visual signals. Here we test the hypothesis using olfactory signals, specifically the aggregation pheromones of species from two genera of bark beetles, Dendroctonus and Ips. We found no direct evidence from within these genera regarding the fact that the chemical blends that make up these pheromones differ more substantially in species that overlap in their geographical ranges and/or host-tree use than in allopatric taxa. However, when comparing between genera, the pheromones of overlapping species appear to be more similar than non-overlapping species. We hypothesize that the species of host tree utilized by the beetles may have some influence on their pheromone blends. Additionally, within genera, species that overlap in host use tend to be more closely related than species that use different hosts. These results may provide indirect evidence for an effect of species overlap on the evolution of bark beetle pheromones.

Spectral element model updating for damage identification using clonal selection algorithm

A spectral element model updating procedure is presented to identify damage in a structure using Guided wave propagation results. Two damage spectral elements (DSE1 and DSE2) are developed to model the local (cracks in reinforcement bar) and global (debonding between reinforcement bar and concrete) damage in one-dimensional homogeneous and composite waveguide, respectively. Transfer matrix method is adopted to assemble the stiffness matrix of multiple spectral elements. In order to solve the inverse problem, clonal selection algorithm is used for the optimization calculations. Two displacement-based functions and two frequency-based functions are used as objective functions in this study. Numerical simulations of wave propagation in a bare steel bar and in a reinforcement bar without and with various assumed damage scenarios are carried out. Numerically simulated data are then used to identify local and global damage of the steel rebar and the concrete-steel interface using the proposed method. Results show that local damage is easy to be identified by using any considered objective function with the proposed method while only using the wavelet energy-based objective function gives reliable identification of global damage. The method is then extended to identify multiple damages in a structure. To further verify the proposed method, experiments of wave propagation in a rectangular steel bar before and after damage are conducted. The proposed method is used to update the structural model for damage identification. The results demonstrate the capability of the proposed method in identifying cracks in steel bars based on measured wave propagation data.

Improving the dispersion and mechanical properties of epoxy/carbon nanotube composites

The incorporation and uniform dispersion of carbon nanotubes (CNTs) in polymer matrix could facilitate engineers to create high performance nanocomposites that potentially compete with most advanced materials in nature. The unique combination of outstanding mechanical, thermal, and electrical properties of CNTs makes them excellent nanofillers for the fabrication of advanced materials. Successful enhancement in mechanical properties via reinforcement is expected only when the nanofillers are well dispersed in the polymer matrix. Moreover, the orientation as well as the CNT/matrix interfacial strength also determines the effective physical properties of the nanocomposites. However, CNTs typically assemble to give bundles, which are heavily entangled to each other with a high aspect ratio and a large π-electronic surface. In this work, we outline some preliminary results in preparing high performance epoxy composites. Composites with fine dispersion and superior mechanical properties were prepared using epoxy and multiwalled carbon nanotubes (MWCNTs). The fine dispersion of the nanocomposites can be identified in the high resolution SEM image shown in Figure 1. This method can provide an alternative route for the preparation of new structural and functional nanocomposites.

Individual, social, and physical environment factors associated with electronic media use among children : sedentary behavior at home

Background: Individual, home social and physical environment correlates of electronic media (EM) use among children were examined and pattern of differences on school and weekend days.
Methods: Youth (n = 298) aged 11 to 12 years self-reported time spent using EM (TV, video/DVD, computer use, and electronic games) on a typical school and a weekend day, each dichotomized at the median to indicate heavy and light EM users. Anthropometric measurements were taken. Logistic regression examined correlates of EM use.
Results: In total, 87% of participants exceeded electronic media use recommendations of ≤ 2 hrs/day. Watching TV during breakfast (OR = 3.17) and after school (OR = 2.07), watching TV with mother (OR = 1.96), no rule(s) limiting time for computer game usage (OR = 2.30), having multiple (OR = 2.99) EM devices in the bedroom and BMI (OR = 1.15) were associated with higher odds of being heavy EM user on a school day. Boys (OR = 2.35) and participants who usually watched TV at midday (OR = 2.91) and late at night (OR = 2.04) had higher odds of being a heavy EM user on the weekend.
Conclusions: Efforts to modify children’s EM use should focus on a mix of intervention strategies that address patterns and reinforcement of TV viewing, household rules limiting screen time, and the presence of EM devices in the child’s bedroom.

A longitudinal study of the family physical activity environment and physical activity among youth

Purpose. Although the family environment is a potentially important influence on children's physical activity (PA), prospective data investigating these associations are lacking. This study aimed to examine the longitudinal relationship between the family environment and PA among youth.

Design. A 5-year prospective cohort study.

Setting. Nineteen randomly selected public schools in Melbourne, Australia.

Subjects. Families of 5- to 6-year-old (n  =  190) and 10- to 12-year-old (n  =  350) children.

Measures. In 2001, parents reported their participation in PA, family-based PA, and support and reinforcement for their child's PA. In 2001, 2004, and 2006, moderate to vigorous intensity PA (MVPA) was assessed among youth using accelerometers. Weekend and “critical window” (after school until 6:00 p.m.) MVPA were examined because we hypothesized that the family environment would most likely influence these behaviors.

Analysis. Generalized estimating equations predicted average change in MVPA over 5 years from baseline family environment factors.

Results. Maternal role modeling was positively associated with boys' critical window and weekend (younger boys) MVPA. Paternal reinforcement of PA was positively associated with critical window and weekend MVPA among all boys, and paternal direct support was positively associated with weekend MVPA (older boys). Among girls, maternal coparticipation in PA predicted critical window MVPA, and sibling coparticipation in PA was directly associated with weekend MVPA (younger girls).

Conclusions. Longitudinal relationships, although weak in magnitude, were observed between the family environment and MVPA among youth. Interventions promoting maternal role modeling, paternal reinforcement of and support for PA, and maternal and sibling coparticipation in PA with youth are warranted.

Structure and thermal stability of natural rubber reinforced with in situ generated zinc sorbate

In situ prepared zinc disorbate (ZDS) in natural rubber (NR) by the reaction of zinc oxide and sorbic acid was used to reinforce the dicumyl peroxide-cured NR vulcanizate. The changes in mechanical properties of NR vulcanizates after ageing and were determined and the structures and thermal stability of vulcanizates were also analyzed using scanning electron microscope and thermal gravimetric analyzer. The change ratios in tensile strength and elongation at break of NR vulcanizate with theoretic formation of ZDS of 21phr can be increased to -33 from -44 and -27 from -38 after ageing and the initial weight loss temperature of NR vulcanizate can be increased for about 7°C as compared to un-reinforced NR vulcanizate, indicating that the antioxidative behavior and thermal stability of NR can be improved significantly with theoretic formation of ZDS of 21phr.

Learning about dynamic scenes

Incremental learning allows modification of developed concepts without the need for prior knowledge of all data. An incremental algorithm is developed to focus on the problems of memory size, forgetting and concept drift. The evidence based forgetting procedure minimizes the concept size and maintains its consistency with respect to the incoming data. An age value associated with the data determines its reinforcement or removal from a concept.

Taming the roving camera : a framework for creating professional home movies through narrative and cinesthetic elements

In this paper we present an application designed to improve the quality of amateur video production. The majority of home movie material is negatively impacted by two factors: lack of narrative content- "what to shoot?", and the absence or inappropriate use of cinesthetic elements for effective reinforcement of content - "how to shoot?". We leverage the age-old communicative powers of Story to answer the what For the second problem, the how, we turn to the corpus of aesthetic principles that constitute the film profession, which impact both technical and cinematic considerations for a given project.

An application of RST in understanding social anxiety and alcohol use

By employing revised-Reinforcement Sensitivity Theory (r-RST) this thesis was the first study to provide important information beyond that afforded by current motivational models in both the social anxiety and alcohol use literature. Specifically, the Fight Flight Freeze system was the most important variable in understanding social anxiety and o-BAS in understanding co-morbid hazardous alcohol use.

Nanofibers - production, properties and functional applications

With the rapid development of nanoscience and nanotechnology over the last decades, great progress has been made not only in the preparation and characterization of nanomaterials, but also in their functional applications. As an important one-dimensional nanomaterial, nanofibers have extremely high specific surface area because of their small diameters, and nanofiber membranes are highly porous with excellent pore interconnectivity. These unique characteristics plus the functionalities from the materials themselves impart nanofibers with a number of novel properties for applications in areas as various as biomedical engineering, wound healing, drug delivery and release control, catalyst and enzyme carriers, filtration, environment protection, composite reinforcement, sensors, optics, energy harvest and storage , and many others. More and more emphasis has recently been placed on large-scale nanofiber production, the key technology to the wide usages of nanofibers in practice. Tremendous efforts have been made on producing nanofibers from special materials. Concerns have been raised to the safety issue of nanofibrous materials. This book is a compilation of contributions made by experts who specialize in their chosen field. It is grouped into three sections composed of twenty-one chapters, providing an up-to-date coverage of nanofiber preparation, properties and functional applications. I am deeply appreciative of all the authors and have no doubt that their contribution will be a useful resource of anyone associated with the discipline of nanofibers.

Glass/carbon fibre hybrid composite laminates for structural applications in automotive vehicles

Light-weight structure is one of the keys to improve the fuel efficiency and reduce the environmental buden of transport vehicles (automotive and rail). While fibreglass composites have been increasingly used to replace steel in automotive industry, the adoption rate for carbon fibre composites which are much lighter, stronger and stiffere than glass fibre composites, remains low. The main reason is the high cost of carbon fibres. To further reduce vehicle weight without excessive cost increase, one technique is to incorporate carbon fibre reinforcement into glass fibre composites and innovative design by selectively reinforcing along the main load path. Glass/carbon woven fabrics with epoxy resin matrix were utilised for preparing hybrid composite laminates. The in-plane mechanical properties such as tensile and three-point-bending flexural properties were investigated for laminates with different carbon fibre volume and lay-up scheme. It is shown that hybrid composite laminates with 50% carbon fibre reinforcement provide the best flexural properties when the carbon layers are at the exterior, while the alternating carbon/glass lay-up provides the highest compressive strength.

Primary prevention of gestational diabetes for women who are overweight and obese : a randomised controlled trial

Background: Gestational Diabetes Mellitus (GDM) has well recognised adverse health implications for the  mother and her newborn that are both short and long term. Obesity is a significant risk factor for developing GDM and the prevalence of obesity is increasing globally. It is a matter of public health importance that clinicians have evidence based strategies to inform practice and currently there is insufficient evidence regarding the impact of dietary and lifestyle interventions on improving maternal and newborn outcomes. The primary aim of this study is to measure the impact of a telephone based intervention that promotes positive lifestyle modifications on the incidence of GDM. Secondary aims include: the impact on gestational weight gain; large for gestational age babies; differences in blood glucose levels taken at the Oral Glucose Tolerance Test (OGTT) and selected factors relating to self-efficacy and psychological wellbeing.