Produção de polpa solúvel a partir de Eucalyptus urograndis

The wood of the gender Eucalyptus occupies a prominence place in relation to other cellulose sources, due to its chemical composition, its low cost, abundance and availability. The dissolving pulp obtaining occurs basically starting from three stages: prehydrolysis of the wood following by cooking and finally by the bleaching process. In the dissolving pulp production is necessary a pretreatment stage for the hemicelluloses removal. Among the chemical cooking processes, the Kraft process is the most used for cellulosic pulps production starting from eucalyptus, in the additive presence or not. The anthraquinone uses in the pulping process has as main purposes increasing the delignification rate as well as protecting the pulp regarding the degradation of the polysaccharide chains. The ECF bleaching process consists of the purification of the pulp through bleaching agents, being excepted the elementary chlorine. The dissolving pulp is a pulp of high a-cellulose content and purity destined to the cellulose derivatives production as carboxymethyl cellulose, nitrocellulose and microcrystalline cellulose. The production of a certain product, as well as its final application, is determined by the chemical properties of the pulp. The present work had as purpose producing cellulosic pulp with kappa number around 9 destined to the production of dissolving pulp in way to evaluate the use of the anthraquinone (AQ) in the Kraft process according to the chemical properties of the obtained pulps. It has been still intended developing an effective technology of bleaching for the high purity and quality dissolving pulp production. The prehydrolysis was accomplished in laboratory rotational autoclave for 30 minutes at 170ºC in the water:wood rate 3,5:1 (L:kg). The Kraft/AQ pulping were accomplished in laboratory rotational autoclave being initially modified the active alkali load (10, 13, 16 and 19%) at sulfidity of 25% ...

Estudo sobre fornos de tratamento térmico e propostas de cogeração de energia em usina siderurgica não integrada

Steel industry is a sector heavily dependent on energy, both electrical and thermal. Since the receipt of raw materials to the shipment of finished products to customers, through mergers, casting, rolling, heat treatment, inspection, among others, high amounts of energy are demanded, generating very significant costs to the productive chain in its entirety . Therefore, any alternative that favors the reduction in energy consumption or barateie the cost of this is very welcome. Within this context, this paper aims to make a technical and economic analysis of installing a cogeneration plant in the field rolling in a non-integrated steel mill. Two configurations are proposed plants, with one being the use of heat from waste gases from furnaces existing in the area mentioned and another with the use of heat from waste gases from an internal combustion engine. Both proposals are evaluated technically and later is done the economic analysis, calculating the financial return (pay back) in relation to the investment required, operation and maintenance of the plant

Estudo das propriedades físicas em materiais vítreos do sistema 50B2O3 - 15CuO - 20Li2O - 15X (X= Na2O, K2O, RbCI e Cs2O)

The increasing demand for devices for solid state applications in many technological areas has resulted in a high demand for new materials. Among these material have the advantage of being manufactured with different chemical compositions, and may have physical properties equal to or higher than the corresponding crystalline material. The aim of this paper was to produce borate glass system 50B2O3 – 15CuO – 20Li2O – 15X (X = Na2O, K2O, RbCl e Cs2O) to analyze the influence of the atomic radius of alkali in the physical properties of this glass system. The glasses were synthesized by the process of melting and molding. The characteristic temperatures were determined by the technique of scanning calorimetry (DSC). The non-crystalline was determined by x-ray diffraction. In order to determine the molar volume a density measurement by using the Archimedes method was used. The structural characterization was carried out using the technique of infrared spectroscopy

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Musuko: os filhos da miscigenação

This project is about a book-report, which will discuss the nipo-brazilian’s identity. The Kasato-Maru ship arrived at Santos about a hundred years ago, opening a path that would never be closed: the path between Japan and Brazil, countries both geographically and culturally opposite. Miscegenation brings the nipo-brazilian to life, a individual who does not feel entirely Brazilian or Japanese. The goal of the book is to discuss the nipo-brazilian’s identity, once known that this individual can adopt one or other culture, or even merge both. It is not intended to conclude anything, so the main objective fulfills itself in the research of the possibilities of identities through interviews, theories, Japanese immigration’s history and Brazilian’s culture

Auxílio do geoprocessamento para a geração do mapa de suscetibilidade à erosão: o caso do córrego Mandu, Rio Claro/SP

The mining of sand, currently, is essential for urban growth, by providing input for the building industry. The consequences of this mining activity to environmental triggers may be severe and irreversible. Among the major impacts caused by sand mining the riparian vegetation removal is detached. The riparian vegetation is essential for balance and maintaining the local ecosystem. For all that had been shown, is possible to verify the importance of environmental studies in areas wich there are mining. This study aimed specially to assess environmental impacts triggered by a mining, located near the headwaters of the stream Mandu, situated in Ajapi, District of Rio Claro-SP. For this purpose, we used remote sensing techniques and GIS to produce thematic maps of slope, pedology, geology, land use and occupation of the soil, and riparian vegetation, using the capabilities of GIS / ArcGIS. The slope map was based on data from the Cartographic IGC 1979, scale 1:10,000. For the production of pedological and geological maps were used Semi-Detailed soil survey of the state of São Paulo, 1981 (1:100,000) and the Geological Map of Zaine (1994), scale 1:50,000, respectively. Since the maps of Use and Land Occupation and Riparian Forest were obtained by visual interpretation of the image of CBERS 2010 following the merger between the HRC and CCD images. From these mappings, and through multi-criteria analysis, map of susceptibility to erosion was made, which supported the environmental assessment of the studied area, indicating susceptible and unsuitable areas for the deployment of economic activities and urban sprawl. This study serves as a model can be replicated in other watersheds, assisting in the proper use planning and land use, aiming at the rational use of natural resources

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Aspectos clínicos e cirúrgicos do osteossarcoma canino

Osteosarcoma is the primary osseous neoplasia frequently diagnosed in dogs and it’s the main answerable for more than 85% of the neoplasias origened from the skeleton. The average age of onset of the lesion is 7 years, especially in large breeds and giant, with males being more affected than females. In general, 75% of osteosarcomas develop in the appendicular skeleton and 25% in the axial. The forelimbs are more affected than the hindlimbs, since support 60% of body weight. The osteosarcoma diagnosis is made by the analys of the animal’s clinic historic, detailed physique exams, blood exams alkaline phosphatase, xray exams, cytology, biopsy. The treatment of choice is the amputation associated to the chemotherapy. However, in some cases the member is preserved by the allograft technic. The chemotherapy associated to the surgery reduces the total load of the tumor, lengthens the interval of the life and improves the quality of pacient’s life. The most used medicines are cisplatin and doxorubicin. They can be used in separated or associated ways. The prognostic of dogs with osteosarcoma is reserved

Estudo da adsorção e oxidação do monóxido de carbono sobre as fases intermetálicas ordenadas AuIn, AuSb2, AuSn, PdSb e PdSn

Aiming to reduce the cost of electrocatalysts and a greater resistance to CO poisoning this work was to study the adsorption and oxidation of carbon monoxide on ordered intermetallic phases AuIn, AuSb2, AuSn, PdSb and PdSn using voltammetric techniques in alkaline electrolyte solution. The results suggest that the AuSn and PdSn intermetallics has some form of resistance to CO poisoning. It is assumed that this behavior is a result of electronic effect and the effect of the third body has been achieved by adding a second metal to Au and Pd. However, further studies should be conducted to confirm this hypothesis as to test these materials as electrocatalysts in the reaction of oxidation of fuels

Crescimeno de apatita na superfície da liga Ti-7, 5Mo empregando tratamento higrotérmico

The objective of the present work was to evaluate surface of experimental alloy Ti-7.5Mo after hydrothermal treatment. Ingots were obtained in arc melting furnace under an argon atmosphere and then homogenized under vacuum at 1100ºC for 86.4 ks to eliminate chemical segregation and after cold worked discs were cutting and grinding. For surface treatment, samples were immersed in a container with NaOH aqueous solution 5M, autoclaved, washed with distilled water. Followed, samples were heat treated and they were soaking in 5xSBF to form an apatite layer on the surface. Surfaces were investigated by, scanning electron microscopy, X-Rays powder diffraction, atomic force microscopy and contact angle, in order to evaluate the wettability of the alloy surface. The results were compared with our previous studies using the group of chemical surface treatments and results shows better condition is 120 minutes in the autoclave

Caracterização da liga do sistema binário Ti-15Mo para aplicações biomedicas

As they have excellent mechanical properties, corrosion resistance and biocompatibility, much research has been conducted with respect to biomedical applications of titanium alloys. This work aims to study the experimental system binary alloy Ti-15Mo, in the raw state of fusion and heat treatment after homogenization, solubilization and calcination (simulating conditions employed for nanotube growth) targeting biomedical applications. Samples were obtained by casting the components in an electric arc furnace with inert atmosphere of argon. After obtaining the alloy, it was heat treated at three different heat treatments, namely homogenizing, calcining and simulation solubilization. The phases present were analyzed by X-ray diffraction, optical microscopy and microhardness testing

Caracterização funcional da proteína XAC1201 envolvida na patogenicidade de Xanthomonas citri subsp. citri

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Patogenicidade do isolado Lins de Trypanosoma vivax em bovinos natural e experimentalmente infectados

Pós-graduação em Medicina Veterinária - FCAV

Mediadores da via intrínseca da morte celular programada relacionados à infecção in vitro pelo herpesvirus bovino tipo 5

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Leucograma e perfil bioquímico sérico de cabras com mastite experimental causada por Staphylococcus aureus e Streptococcus agalactiae

Pós-graduação em Medicina Veterinária - FCAV