Direct effect of PGF2 alpha pulses on PRL pulses, based on inhibition of PRL or PGF2 alpha secretion in heifers

The relationships between PRL and PGF(2 alpha) and their effect on luteolysis were studied. Heifers were treated with a dopamine-receptor agonist (bromocriptine; Bc) and a Cox-1 and -2 inhibitor (flunixin meglumine [FM]) to inhibit PRL and PGF(2 alpha), respectively. The Bc was given (Hour 0) when ongoing luteolysis was indicated by a 12.5% reduction in CL area (cm(2)) from the area on Day 14 postovulation, and FM was given at Hours 0, 4, and 8. Blood samples were collected every 8-h beginning on Day 14 until Hour 48 and hourly for Hours 0 to 12. Three groups of heifers in ongoing luteolysis were used: control (n = 7), Bc (n = 7), and FM (n = 4). Treatment with Bc decreased (P < 0.003) the PRL concentrations averaged over Hours 1 to 12. During the greatest decrease in PRL (Hours 2-6), LH concentrations were increased. Progesterone concentrations averaged over hours were greater (P < 0.05) in the Bc group than in the controls. In the FM group, no PGFM pulses were detected, and PRL concentrations were reduced. Concentrations of PGFM were not reduced in the Bc group, despite the reduction in PRL. Results supported the hypothesis that a decrease (12.5%) in CL area (cm(2)) is more efficient in targeting ongoing luteolysis (63%) than using any day from Days 14 to >= 19 (efficiency/day, 10-24%). The hypothesis that PRL has a role in luteolysis was supported but was confounded by the known positive effect of LH on progesterone. The hypothesis was supported that the synchrony of PGFM and PRL pulses represents a positive effect of PGF(2 alpha), on PRL, rather than an effect of PRL on PGF(2 alpha). (C) 2012 Elsevier Inc. All rights reserved.

Experimental investigations on the first Townsend coefficient in pure isobutane

In this work we present results of the first Townsend coefficient (alpha) in pure isobutane by measuring the current growth as a function of the electric field strength in a pulsed irradiation regime. A Resistive Plate Chamber (RPC)-like configuration was used. To validate this method, as well as to crosscheck the experimental apparatus, measurements of the alpha parameter were firstly carried out with pure nitrogen and the results compared to the accurate data available in the literature. The data obtained with isobutane in a field range from 145 Td up to 200 Td were well-matched to those calculated with Magboltz versions 2.7.1 and 2.8.6. The experimental consistency of these results with other published data in the range of 550-1300 Td was very good, as demonstrated by the use of the Korff parameterization. (C) 2012 Elsevier B.V. All rights reserved.

The 6dF Galaxy Survey: stellar population trends across and through the Fundamental Plane

We present results from an analysis of stellar population parameters for 7132 galaxies in the 6dF Galaxy Survey Fundamental Plane (FP) sample. We bin the galaxies along the axes, v1, v2 and v3, of the tri-variate Gaussian to which we have fitted the galaxy distribution in effective radius, surface brightness and central velocity dispersion (FP space), and compute median values of stellar age, [Fe/H], [Z/H] and [a/Fe]. We determine the directions of the vectors in FP space along which each of the binned stellar population parameters vary most strongly. In contrast to previous work, we find stellar population trends not just with velocity dispersion and FP residual, but with radius and surface brightness as well. The most remarkable finding is that the stellar population parameters vary through the plane (v1 direction) and across the plane (v3 direction), but show no variation at all along the plane (v2 direction). The v2 direction in FP space roughly corresponds to luminosity density. We interpret a galaxys position along this vector as being closely tied to its merger history, such that early-type galaxies with lower luminosity density are more likely to have undergone major mergers. This conclusion is reinforced by an examination of the simulations of Kobayashi, which show clear trends of merger history with v2.

FERM domain interaction with myosin negatively regulates FAK in cardiomyocyte hypertrophy

Focal adhesion kinase (FAK) regulates cellular processes that affect several aspects of development and disease. The FAK N-terminal FERM (4.1 protein-ezrin-radixin-moesin homology) domain, a compact clover-leaf structure, binds partner proteins and mediates intramolecular regulatory interactions. Combined chemical cross-linking coupled to MS, small-angle X-ray scattering, computational docking and mutational analyses showed that the FAK FERM domain has a molecular cleft (similar to 998 angstrom(2)) that interacts with sarcomeric myosin, resulting in FAK inhibition. Accordingly, mutations in a unique short amino acid sequence of the FERM myosin cleft, FP-1, impaired the interaction with myosin and enhanced FAK activity in cardiomyocytes. An FP-1 decoy peptide selectively inhibited myosin interaction and increased FAK activity, promoting cardiomyocyte hypertrophy through activation of the AKT-mammalian target of rapamycin pathway. Our findings uncover an inhibitory interaction between the FAK FERM domain and sarcomeric myosin that presents potential opportunities to modulate the cardiac hypertrophic response through changes in FAK activity.

Suppression of Inflammatory Cytokine Secretion by an NF-kappa B Inhibitor DHMEQ in Nasal Polyps Fibroblasts

Background: NF-kappa B is an essential transcription factor strongly associated to inflammatory response in chronic rhinosinusitis with nasal polyps (CRSwNP). DHMEQ is a NF-kappa B inhibitor that has been previously described with a greatpotential indecreasing inflammation in diseases other than CRSwNP. The aim of study isto evaluate the ability of DHMEQ to reducethe inflammatory recruiters on CRSwNP and to compare its anti-inflammatory profile as a single-agent or in association with fluticasone propionate (FP). Methods: nasal polyp fibroblasts were cultured in TNF-alpha enriched media. Cells were submitted to three different concentrations (1, 10 and 100nM) of either FP, DHMEQ or both. Inflammatory response was accessed by VCAM-1, ICAM-1 and RANTES expression (by RTQ-PCR) and protein levels by ELISA. Nuclear translocation of NF-kappa B was also evaluated. Results: both FP and DHMEQ inhibited inflammatory recruiters' production and NF-kappa B nuclear translocation. Interestingly, the anti-inflammatory effect from the association steroids plus DHMEQ was more intense than of each drug in separate. Conclusion: DHMEQ seems efficient in modulating the inflammatory process in CRSwNP. The synergic anti-inflammatory effect of DHMEQ and steroids may be a promising strategy to be explored, particularly in the setting of steroid-resistant NP. Copyright (c) 2012 S. Karger AG, Basel

Exploring the Schistosoma mansoni adult male transcriptome using RNA-seq

Schistosoma mansoni is one of the agents of schistosomiasis, a chronic and debilitating disease. Here we, present a transcriptome-wide characterization of adult S. mansoni males by high-throughput RNA-sequencing. We obtained 1,620,432 high-quality ESTs from a directional strand-specific cDNA library, resulting in a 26% higher coverage of genome bases than that of the public ESTs available at NCBI. With a 15 x-deep coverage of transcribed genomic regions, our data were able to (i) confirm for the first time 990 predictions without previous evidence of transcription; (ii) correct gene predictions; (iii) discover 989 and 1196 RNA-seq contigs that map to intergenic and intronic genomic regions, respectively, where no gene had been predicted before. These contigs could represent new protein-coding genes or non-coding RNAs (ncRNAs). Interestingly, we identified 11 novel Micro-exon genes (MEGs). These data reveal new features of the S. mansoni transcriptional landscape and significantly advance our understanding of the parasite transcriptome. (c) 2011 Elsevier Inc. All rights reserved.

Ovarian and PGF2 alpha responses to stimulation of endogenous PRL pulses during the estrous cycle in mares

The effects of a PRL-stimulating substance (sulpiride) on PRL and PGF2 alpha secretion and on luteal and ovarian follicular dynamics were studied during the estrous cycle in mares. A control group (n = 9) and a sulpiride group (Sp; n = 10) were used. Sulpiride (25 mg) was given every 8 h from Day 13 postovulation to the next ovulation. Repeated sulpiride treatment did not appear to maintain PRL concentrations at 12-h intervals beyond Day 14. Therefore, the hypothesis that a long-term increase in PRL altered luteal and follicular end points was not testable. Hourly samples were collected from the hour of a treatment (Hour 0) to Hour 8 on Day 14. Concentrations of PRL increased to maximum at Hour 4 in the Sp group. The PRL pulses were more prominent (P < 0.008) in the sulpiride group (peak, 19.4 +/- 1.9 ng/mL; mean +/- SEM) than in the controls (11.5 +/- 1.8 ng/mL). Concentrations of a metabolite of PGF2a (PGFM), number, and characteristics of PGFM pulses, and concentrations of progesterone during Hours 0 to 8 were not affected by the increased PRL. A novel observation was that the peak of a PRL pulse occurred at the same hour or 1 h later than the peak of a PGFM pulse in 8 of 8 PGFM pulses in the controls and in 6 of 10 pulses in the Sp group (P < 0.04), indicating that sulpiride interfered with the synchrony between PGFM and PRL pulses. The hypothesis that sulpiride treatment during the equine estrous cycle increases concentrations of PRL and the prominence of PRL pulses was supported. (c) 2012 Elsevier Inc. All rights reserved.

Implant Stability Measurements of Two Immediate Loading Protocols for the Edentulous Mandible: Rigid and Semi-rigid Splinting of the Implants

Aim: Primary and secondary stabilities of immediately loaded mandibular implants restored with fixed prostheses (FP) using rigid or semirigid splinting systems were clinically and radiographically evaluated. Methods: Fifteen edentulous patients were rehabilitated using hybrid FP; each had 5 implants placed between the mental foramens. Two groups were randomly divided: group 1-FP with the conventional rigid bar splinting the implants and group 2-semi-rigid cantilever extension system with titanium bars placed in the 2 distal abutment cylinders. Primary stability was evaluated using resonance frequency analysis after installation of the implant abutments. The measurements were made at 3 times: T0, at baseline; T1, 4 months after implant placement; and T2, 8 months after implant placement. Presence of mobility and inflammation in the implant surrounding regions were checked. Stability data were submitted to statistical analysis for comparison between groups (P, 0.05). Results: Implant survival rate for the implants was of 100% in both groups. No significant differences in the mean implant stability quotient values were found for both groups from baseline and after the 8-month follow-up. Conclusion: The immediate loading of the implants was satisfactory, and both splinting conditions (rigid and semi-rigid) can be successfully used for the restoration of edentulous mandibles. (Implant Dent 2012;21:486-490)

Diallel cross among fresh market tomato inbreeding lines

The general combining ability (GCA), specific combining ability (SCA), and heterosis were studied in a complete diallel cross among fresh market tomato breeding lines with reciprocal excluded. Fifteen genotypes (five parents and ten hybrids) were tested using a randomized complete block design, with three replications, and the experiments were conducted in Itatiba, São Paulo state, Brazil, in 2005/06. The yield components evaluated were fruit yield per plant (FP), fruit number per plant (FN), average fruit weight (FW); cluster number per plant (CN); fruit number per cluster (FC), fruit wall thickness (FT) and number of locules per fruit (NL). Fruit quality components evaluated were total soluble solids (SS); total titratable acidity (TA); SS/TA ratio, fruit length (FL); fruit width (WI); length to width ratio (FL/WI). The data for each trait was first subjected to analysis of variance. Griffing's method 2, model 1 was employed to estimate the general (GCA) and specific (SCA) combining abilities. Parental and hybrid data for each trait were used to estimate of mid-parent heterosis. For plant fruit yield, IAC-2 was the best parental line with the highest GCA followed by IAC-4 and IAC-1 lines. The hybrids IAC-1 x IAC-2, IAC-1 x IAC-4 and IAC-2 x IAC-4 showed the highest effects of SCA. High heterotic responses were found for fruit yield and plant fruit number with values up to 49.72% and 47.19%, respectively. The best hybrids for fruit yield and plant fruit number were IAC-1 x IAC-2, IAC-1 x IAC-4 and IAC-2 x IAC-5, for fruit yield and plant fruit number, the main yield components.

Correlations between yield and fruit quality characteristics of fresh market tomatoes

Genotypic, phenotypic and environmental correlations were estimated for all possible pairs among eleven characters of tomatoes. Fifteen treatments including five parents and ten hybrids of Instituto Agronômico (IAC) tomato breeding program were evaluated using a randomized complete block experimental design, with tree replications in Itatiba, São Paulo state, Brazil, during 2005/2006. The following traits were evaluated: fruit yield per plant (FP), fruit number per plant (FN), average fruit weight (FW), cluster number per plant (CN), fruit number per cluster (FC), number of locules per fruit (NL), fruit length (FL), fruit width (WI), fruit wall thickness (FT), total soluble solids (SS), and total titratable acidity (TA). The genotypic (rG), phenotypic (rF) and environmental correlations (rA) for two pairs of plant traits were estimated using the Genes© program. High similarity was found among the estimates of genotypic and phenotypic correlations. Positive and high phenotypic and genotypic correlations were observed between FP and the traits FN, FW and FT, and these associations contributed for yield increasing. FW and FT contributed to yield increase and should be considered together as primary yield components in tomato. Positive values of the genotypic and phenotypic correlations revealed that FP influenced FN with high direct effect and significant positive correlation. These traits may be included as the main selection criteria for tomato yield improvement.

LH surge in response to the treatment with GnRH analog or estradiol in ovariectomized buffaloes with or without progesterone pre-exposition

The aim of the present study was to evaluate the LH surge after EB (estradiol benzoate) or GnRH administration with or without P4 (progesterone) pre-exposure in ovariectomized (OVX) buffalo cows. Females were randomly assigned to receive an intravaginal P4 device (D0–D9). They were then given EB 24 h or GnRH 36 h post-P4 device removal (factorial 2×2, n=6 per group). Blood collection for LH measurement began 36 h after the P4 device removal and continued at 3 h intervals. The area under the LH curve (AUC; 30.2 ng2 and 13.41 ng2; P=0.007) and the area of the LH peak (AP; 19.0 ng2 and 8.9 ng2; P=0.009) were greater for EB than GnRH. We did not observe an effect of P4 pre-exposure on the AUC and AP. Furthermore, there was no interaction between P4 pre-exposure and EB or GnRH treatment on the AUC and AP. However, there was an interaction (P<0.01) between P4 pre-exposure and the type of inducer (EB or GnRH) to release a preovulatory-like LH surge at the beginning (BP), final (FP) and time (TP) of the LH peak. The P4 pre-exposure anticipated the BP (2.5 and 7.4 h), TP (6.0 and 12.0 h) and FP (11.5 and 17.1 h) when EB was used to induce a preovulatory-like LH surge (P<0.01). However, there was no effect of P4 pre-exposure on BP (0.4 and 0.4 h), TP (3.0 and 3.0 h) and FP (5.9 and 6.1 h) with GnRH treatment. There was also no effect of the pre-exposure to P4, type of inducer or interaction on the amplitude of the LH peak. We concluded that EB therefore led to greater LH release than GnRH, and pre-exposure to P4 before EB administration anticipated the preovulatory-like LH surge in buffalo cows.

Musgos como bioindicadores de contaminación metálica: caracterización físico-química en términos de adsorción

[EN] Bioindicators have been used in urban and industrial areas to control the atmospheric pollution because it constitutes one of the most important environmental problems of human health. In this sense, mosses are able to reflect the chemical composition of surrounding atmosphere that together with the easy production techniques becomes mosses as one of the potential bioindicators in Europe. This study is part of the Mossclone project (FP-7) and quantifies the adsorption of heavy metals on 4 typical moss species in order to propose one of them to be used for environmental monitoring in the moss bag technique.

Tools and methods for the quality assurance of force platforms in human movement analysis

The human movement analysis (HMA) aims to measure the abilities of a subject to stand or to walk. In the field of HMA, tests are daily performed in research laboratories, hospitals and clinics, aiming to diagnose a disease, distinguish between disease entities, monitor the progress of a treatment and predict the outcome of an intervention [Brand and Crowninshield, 1981; Brand, 1987; Baker, 2006]. To achieve these purposes, clinicians and researchers use measurement devices, like force platforms, stereophotogrammetric systems, accelerometers, baropodometric insoles, etc. This thesis focus on the force platform (FP) and in particular on the quality assessment of the FP data. The principal objective of our work was the design and the experimental validation of a portable system for the in situ calibration of FPs. The thesis is structured as follows: Chapter 1. Description of the physical principles used for the functioning of a FP: how these principles are used to create force transducers, such as strain gauges and piezoelectrics transducers. Then, description of the two category of FPs, three- and six-component, the signals acquisition (hardware structure), and the signals calibration. Finally, a brief description of the use of FPs in HMA, for balance or gait analysis. Chapter 2. Description of the inverse dynamics, the most common method used in the field of HMA. This method uses the signals measured by a FP to estimate kinetic quantities, such as joint forces and moments. The measures of these variables can not be taken directly, unless very invasive techniques; consequently these variables can only be estimated using indirect techniques, as the inverse dynamics. Finally, a brief description of the sources of error, present in the gait analysis. Chapter 3. State of the art in the FP calibration. The selected literature is divided in sections, each section describes: systems for the periodic control of the FP accuracy; systems for the error reduction in the FP signals; systems and procedures for the construction of a FP. In particular is detailed described a calibration system designed by our group, based on the theoretical method proposed by ?. This system was the “starting point” for the new system presented in this thesis. Chapter 4. Description of the new system, divided in its parts: 1) the algorithm; 2) the device; and 3) the calibration procedure, for the correct performing of the calibration process. The algorithm characteristics were optimized by a simulation approach, the results are here presented. In addiction, the different versions of the device are described. Chapter 5. Experimental validation of the new system, achieved by testing it on 4 commercial FPs. The effectiveness of the calibration was verified by measuring, before and after calibration, the accuracy of the FPs in measuring the center of pressure of an applied force. The new system can estimate local and global calibration matrices; by local and global calibration matrices, the non–linearity of the FPs was quantified and locally compensated. Further, a non–linear calibration is proposed. This calibration compensates the non– linear effect in the FP functioning, due to the bending of its upper plate. The experimental results are presented. Chapter 6. Influence of the FP calibration on the estimation of kinetic quantities, with the inverse dynamics approach. Chapter 7. The conclusions of this thesis are presented: need of a calibration of FPs and consequential enhancement in the kinetic data quality. Appendix: Calibration of the LC used in the presented system. Different calibration set–up of a 3D force transducer are presented, and is proposed the optimal set–up, with particular attention to the compensation of non–linearities. The optimal set–up is verified by experimental results.

Development and application of a thermo-hydraulic model supporting the design and the deterministic safety analysis in a sodium cooled fast reactor

Il CP-ESFR è un progetto integrato di cooperazione europeo sui reattori a sodio SFR realizzato sotto il programma quadro EURATOM 7, che unisce il contributo di venticinque partner europei. Il CP-ESFR ha l'ambizione di contribuire all'istituzione di una "solida base scientifica e tecnica per il reattore veloce refrigerato a sodio, al fine di accelerare gli sviluppi pratici per la gestione sicura dei rifiuti radioattivi a lunga vita, per migliorare le prestazioni di sicurezza, l'efficienza delle risorse e il costo-efficacia di energia nucleare al fine di garantire un sistema solido e socialmente accettabile di protezione della popolazione e dell'ambiente contro gli effetti delle radiazioni ionizzanti. " La presente tesi di laurea è un contributo allo sviluppo di modelli e metodi, basati sull’uso di codici termo-idraulici di sistema, per l’ analisi di sicurezza di reattori di IV Generazione refrigerati a metallo liquido. L'attività è stata svolta nell'ambito del progetto FP-7 PELGRIMM ed in sinergia con l’Accordo di Programma MSE-ENEA(PAR-2013). Il progetto FP7 PELGRIMM ha come obbiettivo lo sviluppo di combustibili contenenti attinidi minori 1. attraverso lo studio di due diverse forme: pellet (oggetto della presente tesi) e spherepac 2. valutandone l’impatto sul progetto del reattore CP-ESFR. La tesi propone lo sviluppo di un modello termoidraulico di sistema dei circuiti primario e intermedio del reattore con il codice RELAP5-3D© (INL, US). Tale codice, qualificato per il licenziamento dei reattori nucleari ad acqua, è stato utilizzato per valutare come variano i parametri del core del reattore rilevanti per la sicurezza (es. temperatura di camicia e di centro combustibile, temperatura del fluido refrigerante, etc.), quando il combustibile venga impiegato per “bruciare” gli attinidi minori (isotopi radioattivi a lunga vita contenuti nelle scorie nucleari). Questo ha comportato, una fase di training sul codice, sui suoi modelli e sulle sue capacità. Successivamente, lo sviluppo della nodalizzazione dell’impianto CP-ESFR, la sua qualifica, e l’analisi dei risultati ottenuti al variare della configurazione del core, del bruciamento e del tipo di combustibile impiegato (i.e. diverso arricchimento di attinidi minori). Il testo è suddiviso in sei sezioni. La prima fornisce un’introduzione allo sviluppo tecnologico dei reattori veloci, evidenzia l’ambito in cui è stata svolta questa tesi e ne definisce obbiettivi e struttura. Nella seconda sezione, viene descritto l’impianto del CP-ESFR con attenzione alla configurazione del nocciolo e al sistema primario. La terza sezione introduce il codice di sistema termico-idraulico utilizzato per le analisi e il modello sviluppato per riprodurre l’impianto. Nella sezione quattro vengono descritti: i test e le verifiche effettuate per valutare le prestazioni del modello, la qualifica della nodalizzazione, i principali modelli e le correlazioni più rilevanti per la simulazione e le configurazioni del core considerate per l’analisi dei risultati. I risultati ottenuti relativamente ai parametri di sicurezza del nocciolo in condizioni di normale funzionamento e per un transitorio selezionato sono descritti nella quinta sezione. Infine, sono riportate le conclusioni dell’attività.

Etablierung transgener BY-2-Zelllinien zur In-vivo-Lokalisierung pflanzlicher Cytoskelettproteine

Bei den Pflanzen sind viele Fragen bezüglich der Organisation und Regulation des bei der Zellteilung und differenzierung wichtigen Auf-, Ab- und Umbaus des Mikrotubuli-Netzwerkes noch immer offen, insbesondere was die Rolle des γ-Tubulins betrifft. Ziel der vorliegenden Arbeit war die Etablierung von BY-2 Modell-Zelllinien (Nicotiana), die verschiedene mit fluoreszierenden Proteinen (FP) markierte Elemente des Cytoskeletts exprimieren, um eine fluoreszenzmikroskopische Detektion in vivo zu ermöglichen.rnAls Grundlage für alle weiteren Versuche wurde eine zuverlässige Methode zur A. tumefaciens vermittelten stabilen Transfektion von BY-2 Zellen erarbeitet. Für die Expression von FP-markierten Cytoskelettproteinen, wurden entsprechende Fusionskonstrukte kloniert und via A. tumefaciens in BY-2 Zellen transferiert. So gelang zunächst die Herstellung transgener Zelllinien, die GFP-markiertes α- bzw. γ-Tubulin exprimierten. Diese sollten später als Basis für die Untersuchung des dynamischen Mikrotubuli-Netzwerkes bzw. dessen Regulation dienen. In beiden Zelllinien standen die Konstrukte zunächst unter Kontrolle eines doppelten 35S-Promotors, was zu einer starken, konstitutiven Expression der Transgene führte. Fluoreszenzmikroskopisch konnten Strukturen, an deren Aufbau Mikrotubuli beteiligt sind, detektiert werden. Aufgrund einer starken Hintergrundfluoreszenz, vermutlich bedingt durch die konstitutive Überexpression, war die Darstellung feinerer Bereiche, wie sie im Cytoskelett häufig auftreten, jedoch äußerst schwierig. Deshalb wurde eine schwächere bzw. adäquate Expressionsrate angestrebt. rnPhysiologische Expressionsraten sollten vor allem durch den endogenen γ-Tubulin-Promotor ermöglicht werden. Da die entsprechende Sequenz noch unbekannt war, wurde sie zunächst bestimmt und in ein passendes Konstrukt integriert. Fluoreszenzmikroskopische Untersuchungen der resultierenden Zelllinie ließen auf eine stark reduzierte Expressionsrate schließen. Tatsächlich war die Detektion von Cytoskelettstrukturen, wenn überhaupt, erst bei deutlich längeren Belichtungszeiten möglich. Bedingt durch die langen Belichtungszeiten wurde die Dokumentation durch eine latente pflanzentypische Autofluoreszenz der Zellen erschwert. Auch wenn hier keine detailreicheren Aufnahmen der Cytoskelettstrukturen möglich waren, ist die Zellkultur für weiterführende Untersuchungen, z.B. in Studien bezüglich des zeitlichen Expressionsmusters des γ-Tubulins, potentiell geeignet. Der Einsatz eines sensibleren Mikroskopsystems ist allerdings erforderlich. rnUm klären zu können, inwieweit γ-Tubulin mit den Mikrotubuli co-lokalisiert, wurden Zelllinien benötigt, bei denen die entsprechenden Elemente unterschiedlich markiert waren. Zu diesem Zweck wurde der Einsatz von RFP-markiertem Tubulin getestet. Eine deutliche Überexpression von RFP alleine war möglich. Trotz mehrfacher Wiederholung der Versuche war aber keine Expression von RFP-markiertem α-Tubulin in BY-2 Zellen zur Visualisierung der Mikrotubuli detektierbar. Die DNA-Sequenzen waren im Genom nachweisbar, eine Transkription jedoch nicht. Möglicherweise spielten hier gene silencing Effekte eine Rolle. Das verwendete RFP (TagRFP) und GFP stammten aus unterschiedlichen Organismen, aus einer Seeanemone bzw. einer Qualle. Eine Lösung könnte der Austausch des TagRFP durch ein Quallen-Derivat, das in einer von grün unterscheidbaren Farbe fluoresziert, bringen. Da bereits BY-2 Zelllinien vorliegen, die GFP-markiertes α- bzw. γ-Tubulin exprimieren, sollte es, nach Klonieren eines entsprechenden Konstruktes, zeitnah möglich sein, eine doppelt transfizierte Zelllinie herzustellen.