Towards the renewable relocatable classroom

Relocatable or temporary classrooms are now a common sight in our school grounds. Despite their name, they tend to become permanent structures, due to the limited funding for traditional "bricks and mortar" school buildings. Unfortunately, the designs used for relocatables do not reflect current best practice in energy efficient design. Consequently, they can be either energy hungry and/or thermally uncomfortable, depending on the level of conditioning equipment installed. Opportunities exist to apply solar design principles to the standard relocatable classroom. This paper explores the possibilities of reducing energy consumption to such a le\A31 that the remaining energy could then be supplied to the relocatable classroom from renewable energy technologies

A scale-model room as a practical teaching experiment

A practical experiment is described which was used to help university students increase their understanding of the effect of construction methods and window design on passive solar heating and electrical heating. A number of one tenth scale model rooms were constructed by students and sited out-of-doors in the late autumn. The models were fabricated to mimic available commercial construction techniques with careful consideration being given to window size and placement for solar access. Each model had a thermostatically controlled electric heating element. The temperatures and electricity use of the models were recorded using data-loggers over a two week period. The performances of the models based on energy consumption and internal temperature were compared with each other and with predictions based upon thermal mass and R-values. Examples of questions used by students to facilitate this process are included. The effect of scaling on thermal properties was analysed using Buckingham’s p-theorem.

Learning from measurement

The Built Environment Research Group (BERG) at the School of Architecture and Building at Deakin University is involved in the monitoring of building energy consumption, lighting and acoustic levels, as well as material and thermal performance. Such measurements have taken place in several buildings over the last few years. This has been the result of a deliberate policy of BERG to initiate a process that completes the loop of design, prediction, monitoring, verification, teaching, then back to design again. This paper presents a summary of some projects that have involved building monitoring. We have established a methodology for measuring buildings which will be discussed, as well as the reasoning behind our desire to monitor buildings in general. The paper will present a summary of the results of measurement acquired to date (energy consumption, schedules, operation, etc.) and the lessons that have been learned from this monitoring program.

Validated model and study of a rammed earth wall building

A 2100 m² (GFA) two-storey rammed earth building was built on the Thurgoona campus of Charles Sturt University in 1999. The building is novel both in the use of materials and equipment for heating and cooling. The climate at Wodonga can be characterised as hot and dry, so the challenge of providing comfortable working conditions with minimal energy consumption is considerable. This paper describes a thermal model of one of the second-storey offices on the west-end of the building. The simulation software, TRNSYS, has been used to predict office temperatures and comparisons are made between these and measurements made over a typical week in summer. Reasonable agreement has been achieved under most conditions. The model has been used to investigate key building parameters and strategies, including night flushing, to improve the thermal comfort in the office.

Carbon dioxide levels and ventilation strategies in 'green' office buildings

Energy efficient office buildings are intended to provide a comfortable and healthy environment for their occupants as well as reducing the energy consumption of the building. They are often designed as "showcase" buildings illustrating the potential for savings through some innovative design technology. But do such buildings actually deliver the desired energy savings and satisfactory comfort conditions for occupants? Measurements of a "green" University campus building in Victoria, Australia, designed with an innovative fabric energy storage system, demonstrate that the ventilation system is not providing acceptable indoor air quality conditions. The design strategies used to reduce energy consumption have had negative consequences on the air quality of the building. Insufficient fresh air is being drawn into the building leading to an excessive build up of carbon dioxide. It is recommended that monitoring systems need to use a wider range of measurements than temperature alone to guarantee good quality indoor air and working conditions and that commissioning of buildings should include adequate monitoring of the operational performance of the building. Designers need to be made aware of the potential consequences of their decisions when attempting innovative energy-efficient designs.

On the effect of path loss rates on the optimal receiver position in sensor networks

In this paper we examine the problem of finding an optimal position for a receiver node in a single-hop sensor network. The basic idea is to minimize the network energy consumption according to a particular network cost function. Our contribution is to simply show the effect of signal path loss rates and sensor weighting on the optimal receiver position.

Solar heating systems for recirculation aquaculture

The literature over the past 25 years indicates that there has been a continued interest in using passive and active solar technologies to reduce the conventional energy required to maintain water temperatures in small recirculation aquaculture systems. Although all of the experimental systems reviewed report favourable results, there is little information available to guide system designers. This paper describes the use of a simulation model to predict the annual conventional energy consumption of a 10.6 m3 RAS enclosed in a double layer polyethylene greenhouse in two different climates. The water was maintained at 22.5 °C and the recirculation rate was 10% of tank volume per day. Simple unglazed solar collectors have also been combined with the greenhouse to further reduce energy consumption. The effect of increasing collector area on the solar fraction and utilization of useful energy was predicted. Finally, the model was used to investigate the relationship between the occurrence of condensation on the inner cover, ventilation rates and energy use. It was found that in a hot dry climate, the greenhouse alone was sufficient to reduce the conventional energy requirements by 87%; while in the cooler temperate climate reductions of 66% were possible. When solar collectors were added to the system, conventional energy requirements were reduced further and depended on the area of collector used. For example, in the temperate climate location, conventional energy requirements were reduced to 23% of a RAS enclosed in a non-solar building when 26 m2 of solar collector inclined at the optimum angle for winter energy collection were used. Although condensation could be successfully reduced by ventilation of the greenhouse, this increased conventional energy requirements because the potential for evaporation was increased. Covering the tanks at night was found to be a more effective strategy because it reduced condensation and conventional energy use simultaneously.

Modelling yarn balloon motion in ring spinning

Air-drag on a ballooning yarn and balloon shape affect the yarn tension and ends-down (yarn breakage), which in turn affects energy consumption and yarn productivity in ring spinning. In this article, a mathematical model of yarn ballooning motion in ring spinning is established. The model can be used to generate balloon shape and predict tension in the ballooning yarn under given spinning conditions. Yarn tension was measured using a computer data acquisition system and the balloon shapes were captured using a digital camera with video capability during the experiments using cotton and wool yarns at various balloon-heights and with varying yarn-length in the balloon. The air-drag coefficients on ballooning cotton and wool yarns in ring spinning were estimated by making a “best fit” between the theoretical and experimental turning points. The theoretical results were verified with experimental data. The effects of air-drag and balloon shape on yarn tension are discussed.

Maintaining optimal co-channel interference for power efficient wireless communication

Maintaining QoS (quality of service) guaranteed communication links, and improving the energy consumption; are two aspects that received a significant consideration in the modern wireless sensor network research. This paper formulates a transmission power control problem which satisfies both considerations mentioned above. Moreover, a class of functions for an iterative controller was introduced and analyzed for its convergence. The experimental evaluation of the controller justifies the theoretical assertions as well as the applicability of the control scheme in wireless nodes with minimum measurement capabilities.

A development of environmental conscious design of prison buildings

Environmental conscious design refers to variety of approaches in architecture design that covers technical, behavioural, and functional aspects (Goulding et al, 1992). These approaches usually include contradictory measures with social indicators (Sykes, 1995; Norton, 1999). The contradiction is magnified in incarceration architecture, which is very specific type of buildings (McConville, 2000). Prison buildings represent the split between the society requirements and the needs for the users, in this case the prisoners, to have comfortable environment. Energy as an ultimate natural resource reflects both the cost to the society, in terms of cooling/ heating load and the need for comfort and rehabilitation of prisoners (Al-Hosany and Elkadi, 2000). Different energy codes tend to control the thermal behaviour of buildings in certain environment in order to maximise their energy efficiency (e.g. CIBSE, 1999). In prison buildings, some of the main variables of such code are not relevant. While energy codes, for example, regulate the use of glass in buildings by either minimise the openings size (prescriptive criteria) or by determine an overall limit of heat transfer (performance criteria), the objective in prison buildings is to minimise glass areas for security purposes. This leads in turn to reduction in visual and comfort levels in prison cells. The aim of this paper is to address the balance between the society requirements of reducing energy consumption in prison buildings and the need for humane and comfortable environment for prisoners in order to maintain sustainability. The paper investigates the possible role of façade technologies to bridge the gap between requirements of both society and prisoners.

A practical framework for data collection in wireless sensor networks

Optimizing energy consumption for extending the lifetime in wireless sensor networks is of dominant importance. Groups of autonomous robots and unmanned aerial vehicles (UAVs) acting as mobile data collectors are utilized to minimize the energy expenditure of the sensor nodes by approaching the sensors and collecting their buffers via single hop communication, rather than using multihop routing to forward the buffers to the base station. This paper models the sensor network and the mobile collectors as a system-of-systems, and defines all levels and types of interactions. A practical framework that facilitates deploying heterogeneous mobiles without prior knowledge about the sensor network is presented. Realizing the framework is done through simulation experiments and tested against several performance metrics.

A new distributed power control formula in CDMA mobile networks

The paper presents a new fully distributed uplink power control method for CDMA systems. The power control algorithm calculates explicitly and assigns directly the desired mobile transmit powers achieving both maximum Carrier-to-Interference Ratio at the base station and minimum mobile energy consumption. Compared with the commonly known iterative power control algorithms, the direct assignment method is easier to implement and more power efficient.

Office building characteristics and the links with carbon emissions

Purpose – The purpose of this paper is to present research which analysed energy consumption in the Melbourne central business district (CBD) office stock and examined all buildings to identify CO2 emissions in 2005. The rationale was that, by profiling a large group of buildings, it would be possible to identify characteristics of the stock. For example, do older buildings typically emit more CO2 per square metre than newer buildings?
Design/methodology/approach – This research conducted a detailed analysis of all Melbourne CBD office stock to identify which patterns and trends emerged regarding building characteristics and carbon emissions. The study examined variables such as building size, number of employees, occupancy levels, physical characteristics and building age.
Findings – By examining all office stock and aggregating data, the results confirm that it is possible to identify general physical building characteristics and carbon emissions. This research confirmed that clear relationships existed within the Melbourne CBD office stock in terms of building size, age and the density of occupation in relation to CO2 emissions.
Originality/value – Practitioners can apply this knowledge to the professional advice they give to clients to assist in achieving increased energy efficiency in the office stock, for example in refurbishment being conscious that smaller buildings will be generally less energy-efficient than larger ones.

Cooperative relaying in wireless sensor networks

Cooperative relaying has been shown to be an effective method to significantly improve the error-rate performance in wireless networks. This technique combats fading by exploiting the spatial diversity made available through cooperating nodes that relay signals for each other. In the context of wireless sensor networks, cooperative relaying can be applied to reduce the energy consumption in sensor nodes and thus extend the network lifetime. Realizing this benefit, however, requires a careful incorporation of this technique into the routing process to exploit diversity gains. In this chapter, we introduce the basic concepts required to understand cooperative relaying and review current state of the art energy-efficient routing protocols that realize cooperative relaying.

Investigation of yarn hairiness

Yarn hairiness affects not only the quality of products, but also the productivity in spinning and weaving. Too much yarn hairiness is undesirable for many end uses as well as the spinning and post spinning processes. The main aims of this project are to examine the hairiness features of various yarns and to reduce yarn hairiness. The thesis covers five related areas – hairiness assessment, factors affecting yarn hairiness, the hairiness of newly developed yarns, yarn hairiness reduction, and effect of yarn hairiness on the energy consumption in ring spinning. The worsted cashmere, pure wool and wool/cashmere blend yarns were employed to investigate the effect of some fibre parameters on the yarn hairiness. A single exponential distribution of the hair-length was confirmed first, using the data from the Zweigle G565 Hairiness Meter. A linear relationship was observed between the blend ratio and the hairiness indexes. In particular, the effect of fibre crimp or curvature on yarn hairiness is examined. The theory of yarn hairiness composition was also developed further. The effect of draft ratio and spindle speed on the hairiness of worsted wool yarn was examined next with a factorial experiment design. Several new hairiness indexes, namely the relative hairiness indexes, have been used to explain the results obtained. In the investigation of the hairiness of newly developed yarns, the hairiness of the Compact Spun and Roller-Jet-Spun yarns was examined first. The composition of the yarn hairiness, the hair-length distribution, and the effect of test speed on yarn hairiness were then studied. An important finding is that for both yarns, the predominant hairiness feature is the looped hairs. A comparison of the hairiness of Solospun yarns and the equivalent ring spun wool yarns was undertaken. The hair-length distribution of the Solospun yarn was examined first. The Solospun yarns used had fewer hairs in most hair-length groups and lower variations in hairiness. In addition, the effect of twist level and spindle speed on the hairiness of Solospun and conventional ring spun yarns has also been discussed. A novel approach of reducing yarn hairiness – spinning with a ‘Diagonal’ yarn path was examined next. Both ‘Left Diagonal’ and ‘Right Diagonal’ yarn arrangements were studied. A new finding is that the ‘Right Diagonal’ yarn path leads to reduced hairiness for the Z-twist yarn, while yarn evenness and tenacity are not as sensitive to the modified yarn path. The mechanism of hairiness reduction with the ‘Diagonal’ yarn path has been discussed. The spinning performance of “Right Diagonal” yarn arrangement has also been evaluated. Finally, the effect of yarn hairiness on the energy consumption in ring spinning has been investigated theoretically and experimentally. A theoretical model has been developed, which represents the first attempt at theoretically investigating the influence of yarn hairiness on energy consumption during the winding stage of ring spinning. The experimental results have generally confirmed predictions of this model. Recommendations for further research in this area have also been made in the concluding chapter of this thesis.