Clinical update on scorpion envenoming

Abstract: Scorpion stings are currently the leading cause of venom-related injury to humans in Brazil and are a significant public health problem globally. Only scorpions of the Tityus genus are of medical importance in Brazil, and Tityus serrulatus is responsible for the most serious envenomations and deaths. The toxic effects of scorpion envenomation are due to a massive release of sympathetic and parasympathetic neurotransmitters; the severity is related to cardiac and hemodynamic changes, with cardiogenic shock and pulmonary edema contributing to the main causes of death. The pathophysiology of cardiac involvement has been discussed for decades and has been attributed to adrenergic discharge and a possible toxic effect of venom on the myocardium, while acute pulmonary edema may have a cardiogenic and/or non-cardiogenic origin. Currently, the clinical data point to catecholamine excess as the cause for reversible scorpion cardiomyopathy . These data include electrocardiographic changes, profiling of cardiac enzymes and troponin I, echocardiographic data with global or regional left ventricle dysfunction, and myocardial perfusion alterations compatible with spasm in the coronary microcirculation. Furthermore, recent data on cardiac magnetic resonance imaging findings, which are similar to those observed for stress-induced cardiomyopathy, have also been linked to catecholamine excess. The efficiency of antivenom serum treatment is controversial in the literature. Our experience in Brazil is that the management of patients with systemic manifestations of scorpion stings is based on three approaches, all of which are extremely important. These include symptomatic treatment, antivenom serum, and cardiorespiratory support.

Diagnosis of latent Mycobacterium tuberculosis infection: tuberculin test versus interferon-gamma release

Abstract: INTRODUCTION: The treatment of individuals with active tuberculosis (TB) and the identification and treatment of latent tuberculosis infection (LTBI) contacts are the two most important strategies for the control of TB. The objective of this study was compare the performance of tuberculin skin testing (TST) with QuantiFERON-TB Gold In TUBE(r) in the diagnosis of LTBI in contacts of patients with active TB. METHODS: Cross-sectional analytical study with 60 contacts of patients with active pulmonary TB. A blood sample of each contact was taken for interferon-gamma release assay (IGRA) and subsequently performed the TST. A receiver operating characteristic curve was generated to assess the cutoff points and the sensitivity, predictive values, and accuracy were calculated. The agreement between IGRA and TST results was evaluated by Kappa coefficient. RESULTS: Here, 67.9% sensitivity, 84.4% specificity, 79.1% PPV, 75% NPV, and 76.7% accuracy were observed for the 5mm cutoff point. The prevalence of LTBI determined by TST and IGRA was 40% and 46.7%, respectively. CONCLUSIONS: Both QuantiFERON-TB Gold In TUBE(r) and TST showed good performance in LTBI diagnosis. The creation of specific diagnostic methods is necessary for the diagnosis of LTBI with higher sensitivity and specificity, preferably with low cost and not require a return visit for reading because with early treatment of latent forms can prevent active TB.

Blocking tumor exosome release using nanovectorization systems

Exosomes are small membrane vesicles secreted by most cell types, either normal or malignant and are found in most body fluids such as saliva, plasma and breast milk. In the past decade, the interest in these vesicles has been growing more and more since it was found that besides their beneficial functions such as the removal of cellular debris and unnecessary proteins during cell maturation process, they can also interact with other cells and transfer information between them, thus helping diseases like cancer to progress. The present work intended to use gold nanoparticles as vehicles for gene silencing in an attempt to reduce the tumor-derived exosome secretion, regulated by Rab27a protein, and also aimed to compare the exosome secretion between two breast cell lines, MCF7 and MDA. Changes in RAB27A gene expression were measured by Real-time Quantitative PCR and it was revealed a decreased in RAB27A gene expression, as expected. Exosomes were isolated and purified by two different methods, ultracentrifugation and the commercial kit ExoQuick™ Solution, and further characterized using Western Blot analysis. ExoQuick™ Solution was proven to be the most efficient method for exosome isolation and it was revealed that MDA cells secrete more exosomes. Furthermore, the isolated MCF7-derived exosomes were placed together with a normal bronchial/tracheal epithelial cell line (BTEC) for an additional assay, which aimed to observe the uptake of exosomes by other cells and the exosomes’ capability of promoting cell-cell communication. This observation was made based on alterations in the expression levels of c-Myc and miR-21 genes and the fact that they both have an increased expression in BTEC cells incubated with tumor-derived exosomes when compared to control cells (without incubation with the exosomes) lead us to the conclusion that the exosome uptake and exchange of information between the exosomes and the normal cells did occurred.

Novel antibiotic-loaded orthopaedic bone cements: insights on drug release profiles and biocompatibility

Acrylic bone cement (BC) is widely used as an anchor of artificial joints. Bacterial infection due to biofilm formation and inflammation are common and difficult to treat problems associated with commercial available BC formulations. Research on novel BC compositions is urgently needed. The main objective of this thesis was to develop a new biocompatible antibiotic-loaded BC with improved release profile. To achieve that aim several additives were incorporated, as an antibiotic (levofloxacin) to combat bacterial growth, an anti-inflammatory drug (diclofenac) to decrease the inflammatory process and two well-known and broadly used biopolymers, alginate and chitosan in order to increase matrix porosity, and in this way to intensify the amount of released drug. Novel BC formulations were tested in order to find the most suitable one that had potential to proceed to clinical application. Numerous tests were conducted as: a) evaluation of drug release profiles in different biomimetic media, b) mechanical and surface studies, c) microbiological activity testing against Staphylococcus aureus and d) in vitro biocompatibility assays (fibroblasts and osteoblasts). In general, the addition of biopolymers increased drug release, didn’t compromised BC mechanical properties and increased BC hydrophilicity. Microbiological testing revealed that Lev[BC]Chi was the only matrix that reduced significantly biofilm formation. On the contrary, alginate and diclofenac loading into BC seemed to increase biofilm growth. Biocompatibility studies showed some decrease in cell viability, in particularly on osteoblasts, mainly due to the high amounts of released drugs. In conclusion, the present work has shown that the matrix with more potential to proceed in further investigations was Lev[BC]Chi. Other conditions (namely additives and drugs concentrations) should be evaluated with the other tested BC matrices before being discharged.

Malaria epidemiology in the State of Piauí, Northeastern Brazil: a retrospective study with secondary data

Abstract: INTRODUCTION Malaria is not considered endemic in State of Piauí. METHODS Malaria epidemiology was examined using surveillance data. RESULTS: During 2002-2013, of the 484 cases of malaria, 217 were classified as probably acquired in Piauí, most frequently in the Campo Largo, Buriti dos Lopes, and Luzilândia municipalities, and 267 were considered probably imported, from the States of Pará, Maranhão, Amazonas, Roraima, and Rondônia. Probably-imported cases occurred throughout the year, while 80.2% of the probably-acquired cases occurred in April-August, peaking at the end of the rainy season. CONCLUSIONS Malaria surveillance should be intensified. Further ecoepidemiological and entomological studies are needed.

Pressure sores among malnourished necropsied adults - preliminary data

Pressure sores are common among bedridden, elderly, or malnourished patients, and may occur in terminal ill patients because of impaired mobility, fecal or urinary incontinence, and decreased healing capacity. The aim of this study was to compare frequency of pressure sores between malnourished and non-malnourished necropsied adults. METHOD: All (n = 201) adults (age ³ 18 years) autopsied between 1986 and 1996 at the Teaching Hospital of Triangulo Mineiro Medical School (Uberaba) were eligible for the study. Gender, race, weight, height and main diagnoses were recorded. Ninety-six cases were excluded because of probable body water retention (congestive heart failure, hepatic insufficiency, nephrotic syndrome) or pressure sores secondary to peripheral vascular ischemia. Body mass index (BMI) was used to define malnourished (BMI < 18.5 kg/m²) and non-malnourished (BMI > 18.5kg/m²) groups. RESULTS: Except for weight (42.5kg; range: 28-57 vs. 60; 36-134.5kg) and BMI (16.9; range: 12.4-18.5 vs. 22.7; range: 18.5-54.6kg/m²), respectively, there were no statistical differences among 43 malnourished and 62 non-malnourished cases in relation to age (54.9 ± 20.4 vs. 52.9 ± 17.9 years), percentage of white persons (74.4 vs. 64.5%), male gender (76.7 vs. 69.3%) and main diagnoses. Five malnourished (11.6%) and 7 (11.5%) non-malnourished cases had pressure sores (p=0.89). CONCLUSION: Pressure sores were equally common findings in necropsied persons with protein-energy malnutrition, as assessed by body mass index.

Building 3D City Models: Testing and Comparing Laser Scanning and Low-Cost UAV Data Using FOSS Technologies

Contém resumo

Comuns: An Open-Data Provider, Explorer and Analytic Toolbox Based on FOSS

Contém resumo

Premature thelarche: identification of clinical and laboratory data for the diagnosis of precocious puberty

PURPOSE: Two groups of girls with premature breast development were studied retrospectively. We tried to identify clinical, radiological, and hormonal parameters that could distinguish between a benign, nonprogressive premature thelarche and a true precocious puberty. METHODS: The clinical outcome of 88 girls with breast enlargement before 6.1 years of age was analyzed. Taking into account the progression of their sexual maturation, we allocated the children into 2 groups: "Isolated Premature Thelarche" (n = 63) and "Precocious Puberty" (n = 25) groups. Chronological and bone ages, height and growth velocity centiles, computerized tomography of hypothalamus-pituitary area, pelvic ultrasonography, gonadotropin response to luteinizing hormone-releasing hormone stimulation as well as basal levels of luteinizing hormone, follicle-stimulating hormone, estradiol, and prolactin were studied in both groups. Statistical analysis were performed using the Student t test to compare the sample means. Fisher's exact test and chi² test were used to analyze the nonparametric variables. RESULTS: Isolated premature thelarche most frequently affected girls younger than 2 years who presented exaggerated follicle-stimulating hormone response to luteinizing hormone-releasing hormone stimulation test. The precocious puberty group had higher initial stature, accelerated growth rate and bone age, increased uterine and ovarian volumes, high spontaneous luteinizing hormone levels by immunofluorimetric assay, as well as a high luteinizing hormone response and peak luteinizing hormone/follicle-stimulating hormone ratio after luteinizing hormone-releasing hormone stimulation. CONCLUSION: At initial presentation, girls who undergo true precocious puberty present advanced bone age, increased uterine and ovarian volumes in addition to breast enlargement, as well as an luteinizing hormone-predominant response after a luteinizing hormone-releasing hormone stimulation test.

Análise da eficiência na gestão do risco de fornecedores: aplicação de um modelo Data Envelopment Analysis

Atualmente a tendência dos negócios leva a cadeias de abastecimento complexas e dinâmicas, que consequentemente levanta questões relativas ao aumento do risco de fornecimento em torno dessas mesmas cadeias; pelo que existe cada vez mais uma necessidade dos gestores identificarem e gerirem o risco de um modo mais diversificado. Associado às cadeias de abastecimento estão os fornecedores. A maioria dos riscos relativos a estes, está incluída no contexto de risco de fornecimento, resultando assim numa problemática de seleção e avaliação de fornecedores. Riscos como baixa qualidade, atrasos na entrega, falha ou interrupção de fornecimento, são exemplos de fatores de risco associados. Neste contexto, um dos maiores desafios para as organizações atualmente é trabalharem com os melhores fornecedores do mercado, procurando garantir a estabilidade em termos de fornecimento, com as melhores condições possíveis, quer a nível de preço, qualidade, entre outros, exigindo cada vez mais relações comerciais eficientes com os fornecedores. Assim, este trabalho tem como objetivo o desenvolvimento de um modelo baseado no método Data Envelopment Analysis (DEA), que permite às organizações avaliar e melhorar a eficiência das suas relações comerciais na gestão de risco de fornecimento nas suas cadeias de abastecimento. Como tal, o modelo proposto é divido em dois casos, que diferem pela origem da obtenção dos seus valores. Ou seja, num dos casos é aplicada uma avaliação externa à organização, e no outro é utilizada uma avaliação interna, o que permitirá discutir a sua utilização. Segundo o modelo proposto verificou-se que a eficiência média foi de 93% no caso I e 94% no caso II. Concluindo-se ainda ambos os casos necessitam de melhorias nos fornecimentos ao nível de: Qualidade, Logística e Tecnologia, ou seja, melhorar a qualidade dos serviços prestados, diminuir os seus prazos de execução dos serviços/fornecimento de material e aumento do conhecimento tecnológico.

Grande panorama de Lisboa em azulejo: Novos contributos para a fixação da data, encomenda e autoria

O Grande panorama de Lisboa, obra maior da azulejaria nacional e hoje à guarda do Museu Nacional do Azulejo, pertenceu outrora a um palácio situado na freguesia de Santiago, propriedade da família Ferreira de Macedo no final do século XVII. A investigação apresentada procura esclarecer alguns aspectos relacionados com a execução do grandioso painel e com o perfil sócio-cultural do encomendador. À luz de novos elementos documentais, o artigo discute ainda a questão da autoria do painel, dada há muito ao pintor barroco Gabriel del Barco.

Um modelo Data Envelopment Analysis para avaliação da eficiência dos terminais de contentores do grupo TERTIR

O transporte marítimo tem vindo a adquirir uma considerável importância na economia mundial desde o século XV. O transporte marítimo é visto como um dos meios de transporte mais viáveis, que engloba um largo número de destinos no mundo e representa, para uma determinada distância a percorrer, o menor custo por tonelada. É, também, comparativamente com o transporte aéreo e rodoviário, o meio de transporte menos poluente, tornando-o, assim, uma alternativa “amiga do ambiente”. Em particular, o transporte via contentores tem vindo a ser cada vez mais utilizado devido às suas inúmeras vantagens. O contentor permite o transporte de qualquer tipo de mercadoria em boas condições de acondicionamento e permitiu otimizar as operações efetuadas através da redução de tempo de trabalho, custos e espaço. Ademais, com a globalização, a evolução do mercado, a construção de navios de maiores dimensões e a maior tecnologia investida no setor, a competição entre os portos alcançou níveis que exigem uma maior eficiência de toda a estrutura portuária. Neste contexto, a presente dissertação visa avaliar a eficiência dos terminais de contentores do grupo TERTIR, nomeadamente os de Lisboa, Leixões e Setúbal, utilizando o método Data Envelopment Analaysis (DEA). De um modo geral, o método DEA avalia a capacidade dos terminais em converter inputs em outputs. Mais especificamente os inputs selecionados nesta dissertação dizem respeito às infraestruturas e equipamentos dos terminais em estudo, e o output considera a carga movimentada por cada terminal, sendo neste caso representada pelo número de TEUs movimentados. O modelo proposto é aplicado a um conjunto de 30 terminais de contentores Europeus de 6 países diferentes, nomeadamente, Alemanha, Bélgica, Espanha, França, Holanda e Portugal. De um modo geral, os terminais TERTIR apresentam níveis de eficiência baixos quando comparados com outros terminais Europeus. Os resultados contribuem, também, para auxiliar o grupo TERTIR no debate de algumas questões atuais com as autoridades portuárias, nomeadamente no que se refere à descida dos tarifários praticados aos seus clientes e à enunciada construção do terminal de contentores do Barreiro.

Biotransformation/separation routes to obtain pure enantiomers

The objective of the work presented in this thesis was the development of an innovative approach for the separation of enantiomers of secondary alcohols, combining the use of an ionic liquid (IL) - both as solvent for conducting enzymatic kinetic resolution and as acylating agent - with the use of carbon dioxide (CO2) as solvent for extraction. Menthol was selected for testing this reaction/separation approach due to the increasing demand for this substance, which is widely used in the pharmaceutical, cosmetics and food industries. With a view to using an ionic ester as acylating agent, whose conversion led to the release of ethanol, and due to the need to remove this alcohol so as to drive reaction equilibrium forward, a phase equilibrium study was conducted for the ehtanol/(±)-menthol/CO2 system, at pressures between 8 and 10 MPa and temperatures between 40 and 50 oC. It was found that CO2 is more selective towards ethanol, especially at the lowest pressure and highest temperature tested, leading to separation factors in the range 1.6-7.6. The pressure-temperature-composition data obtained were correlated with the Peng-Robinson equation of state and the Mathias-Klotz-Prausnitz mixing rule. The model fit the experimental results well, with an average absolute deviation (AAD) of 3.7 %. The resolution of racemic menthol was studied using two lipases, namely lipase from Candida rugosa (CRL) and immobilized lipase B from Candida antarctica (CALB), and two ionic acylating esters. No reaction was detected in either case. (R,S)-1-phenylethanol was used next, and it was found that with CRL low, nonselective, conversion of the alcohol took place, whereas CALB led to an enantiomeric excess (ee) of the substrate of 95%, at 30% conversion. Other acylating agents were tested for the resolution of (±)-menthol, namely vinyl esters and acid anhydrides, using several lipases and varying other parameters that affect conversion and enantioselectivity, such as substrate concentration, solvent and temperature. One such acylating agent was propionic anhydride. It was thus performed a phase equilibrium study on the propionic anhydride/CO2 system, at temperatures between 35 and 50 oC. This study revealed that, at 35 oC and pressures from 7 MPa, the system is monophasic for all compositions. The enzymatic catalysis studies carried out with propionic anhydride revealed that the extent of noncatalyzed reaction was high, with a negative effect on enantioselectivity. These studies showed also that it was possible to reduce considerably the impact of the noncatalyzed reaction relative to the reaction catalyzed by CRL by lowering temperature to 4 oC. Vinyl decanoate was shown to lead to the best results at conditions amenable to a process combining the use of supercritical CO2 as agent for post-reaction separation. The use of vinyl decanoate in a number of IL solvents, namely [bmim][PF6], [bmim][BF4], [hmim][PF6], [omim][PF6], and [bmim][Tf2N], led to an enantiomeric excess of product (eep) values of over 96%, at about 50% conversion, using CRL. In n-hexane and supercritical CO2, reaction progressed more slowly.(...)

Genetic algorithm for shipping route estimation with long-range tracking data : automatic reconstruction of shipping routes based on the historical ship positions for maritime safety applications

Ship tracking systems allow Maritime Organizations that are concerned with the Safety at Sea to obtain information on the current location and route of merchant vessels. Thanks to Space technology in recent years the geographical coverage of the ship tracking platforms has increased significantly, from radar based near-shore traffic monitoring towards a worldwide picture of the maritime traffic situation. The long-range tracking systems currently in operations allow the storage of ship position data over many years: a valuable source of knowledge about the shipping routes between different ocean regions. The outcome of this Master project is a software prototype for the estimation of the most operated shipping route between any two geographical locations. The analysis is based on the historical ship positions acquired with long-range tracking systems. The proposed approach makes use of a Genetic Algorithm applied on a training set of relevant ship positions extracted from the long-term storage tracking database of the European Maritime Safety Agency (EMSA). The analysis of some representative shipping routes is presented and the quality of the results and their operational applications are assessed by a Maritime Safety expert.

Modelos de negócios para a internet das coisas baseados em big data : Muzzley, um estudo de caso

A Internet das Coisas tal como o Big Data e a análise dos dados são dos temas mais discutidos ao querermos observar ou prever as tendências do mercado para as próximas décadas, como o volume económico, financeiro e social, pelo que será relevante perceber a importância destes temas na atualidade. Nesta dissertação será descrita a origem da Internet das Coisas, a sua definição (por vezes confundida com o termo Machine to Machine, redes interligadas de máquinas controladas e monitorizadas remotamente e que possibilitam a troca de dados (Bahga e Madisetti 2014)), o seu ecossistema que envolve a tecnologia, software, dispositivos, aplicações, a infra-estrutura envolvente, e ainda os aspetos relacionados com a segurança, privacidade e modelos de negócios da Internet das Coisas. Pretende-se igualmente explicar cada um dos “Vs” associados ao Big Data: Velocidade, Volume, Variedade e Veracidade, a importância da Business Inteligence e do Data Mining, destacando-se algumas técnicas utilizadas de modo a transformar o volume dos dados em conhecimento para as empresas. Um dos objetivos deste trabalho é a análise das áreas de IoT, modelos de negócio e as implicações do Big Data e da análise de dados como elementos chave para a dinamização do negócio de uma empresa nesta área. O mercado da Internet of Things tem vindo a ganhar dimensão, fruto da Internet e da tecnologia. Devido à importância destes dois recursos e á falta de estudos em Portugal neste campo, com esta dissertação, sustentada na metodologia do “Estudo do Caso”, pretende-se dar a conhecer a experiência portuguesa no mercado da Internet das Coisas. Visa-se assim perceber quais os mecanismos utilizados para trabalhar os dados, a metodologia, sua importância, que consequências trazem para o modelo de negócio e quais as decisões tomadas com base nesses mesmos dados. Este estudo tem ainda como objetivo incentivar empresas portuguesas que estejam neste mercado ou que nele pretendam aceder, a adoptarem estratégias, mecanismos e ferramentas concretas no que diz respeito ao Big Data e análise dos dados.