Longitudinal assessment of neuropathy in type 1 diabetes using novel ophthalmic markers (LANDMark) : study design and baseline characteristics

Aims Corneal nerve morphology and corneal sensation threshold have recently been explored as potential surrogate markers for the evaluation of diabetic neuropathy. We present the baseline findings of the ‘Longitudinal Assessment of Neuropathy in type 1 Diabetes using novel ophthalmic Markers’(LANDMark) study. Methods The LANDMark study is a 4-year, two-site, natural history study of three participant groups: type 1 diabetes with neuropathy (T1W), type 1 diabetes without neuropathy (T1WO) and control participants without diabetes or neuropathy. All participants undergo a detailed annual assessment of neuropathy including corneal nerve parameters measured using corneal confocal microscopy and corneal sensitivity measured using non-contact corneal aesthesiometry. Results 76 T1W, 166 T1WO and 154 control participants were enrolled into the study. Corneal sensation threshold (mbars) was significantly higher (i.e. sensitivity was lower) in T1W (1.0 ± 1.1) than T1WO (0.7 ± 0.7) and controls (0.6 ± 0.4) (p < 0.001), with no difference between T1WO and controls. Corneal nerve fibre length was lower in T1W (14.0 ± 6.4 mm/mm2) compared to T1WO (19.1 ± 5.8 mm/mm2) and controls (23.2 ± 6.3 mm/mm2) (p < 0.001). Corneal nerve fibre length was lower in T1WO compared to controls. Conclusions The LANDMark baseline findings confirm a reduction in corneal sensitivity only in Type 1 patients with neuropathy. However, corneal nerve fibre length is reduced even in Type 1 patients without neuropathy with an even greater deficit in Type 1 patients with neuropathy.

Specification & design of safety technologies for complex socio-technical systems : low-cost level crossings case study

The introduction of safety technologies into complex socio-technical systems requires an integrated and holistic approach to HF and engineering, considering the effects of failures not only within system boundaries, but also at the interfaces with other systems and humans. Level crossing warning devices are examples of such systems where technically safe states within the system boundary can influence road user performance, giving rise to other hazards that degrade safety of the system. Chris will discuss the challenges that have been encountered to date in developing a safety argument in support of low-cost level crossing warning devices. The design and failure modes of level crossing warning devices are known to have a significant influence on road user performance; however, quantifying this effect is one of the ongoing challenges in determining appropriate reliability and availability targets for low-cost level crossing warning devices.

Cross-cultural web user interface design for Indigenous internet users

This project investigated 1) Australian web designers’ cultural perceptions towards Australian Indigenous users and 2) Australian Indigenous cultural features in terms of user interface design. In doing so, it reviews the literature of cross-cultural user interface design by focusing on feasible models and arguments to articulate and integrate Australian Indigenous Internet users’ cultural needs of web user interface. The online survey results collected from 101 Indigenous users and 126 Web designers showed a distinctive difference between them on the integration of Indigenous users' cultural in Web sites. The interview data collected from 14 Indigenous users and 14 web designers suggested practical approaches to the design implications of Indigenous culture.

A new approach to understanding readings for design students

In this paper I describe an innovative technique for helping design students to approach and understand reading tasks. There is ample literature on design students’ use of visual thinking for design tasks, but less on how they can use their visual skills to apply to their learning in other areas, particularly those that challenge them such as academic reading and writing. I set a cartooning task as a way to get students motivated and involved in doing set readings for a design history course. This has been successful in enhancing students’ involvement and understanding, and they have been able to apply their improved understanding to writing tasks based on the cartoons.

Comparison of high level FPGA hardware design for solving tri-diagonal linear systems

Reconfigurable computing devices can increase the performance of compute intensive algorithms by implementing application specific co-processor architectures. The power cost for this performance gain is often an order of magnitude less than that of modern CPUs and GPUs. Exploiting the potential of reconfigurable devices such as Field-Programmable Gate Arrays (FPGAs) is typically a complex and tedious hardware engineering task. Re- cently the major FPGA vendors (Altera, and Xilinx) have released their own high-level design tools, which have great potential for rapid development of FPGA based custom accelerators. In this paper, we will evaluate Altera’s OpenCL Software Development Kit, and Xilinx’s Vivado High Level Sythesis tool. These tools will be compared for their per- formance, logic utilisation, and ease of development for the test case of a Tri-diagonal linear system solver.

Cross-layer design for traffic management in wireless networked control systems

Wireless networked control systems (WNCSs) have been increasingly deployed in industrial applications. As they require timely data packet transmissions, it is difficult to make efficient use of the limited channel resources, particularly in contention based wireless networks in the layered network architecture. Aiming to maintain the WNCSs under critical real-time traffic condition at which the WNCSs marginally meet the real-time requirements, a cross-layer design (CLD) approach is presented in this paper to adaptively adjust the control period to achieve improved channel utilization while still maintaining effective and timely packet transmissions. The effectiveness of the proposed approach is demonstrated through simulation studies.

Understanding the implications of digital interactions on the design of public urban spaces

This study investigated the impact of digital networked social interactions on the design of public urban spaces. Urban informatics, social media, ubiquitous computing, and mobile technology offer great potential to urban planning, as tools of communication, community engagement, and placemaking. The study considers the function of public spaces as 'third places,' that is, social places that are familiar, comfortable, social and meaningful for everyday life outside the home and work. Libraries were chosen as the study's focus. The study produced findings and insights at the intersection of urban planning (place), cultural geography and urban sociology (people), and information communication technology (technology) – the triad of urban informatics.

Numerical modelling of load bearing light gauge steel frame wall systems exposed to realistic design fires

Fire safety has become an important part in structural design due to the ever increasing loss of properties and lives during fires. Conventionally the fire rating of load bearing wall systems made of Light gauge Steel Frames (LSF) is determined using fire tests based on the standard time-temperature curve in ISO834 [1]. However, modern commercial and residential buildings make use of thermoplastic materials, which mean considerably high fuel loads. Hence a detailed fire research study into the fire performance of LSF walls was undertaken using realistic design fire curves developed based on Eurocode parametric [2] and Barnett’s BFD [3] curves using both full scale fire tests and numerical studies. It included LSF walls without cavity insulation, and the recently developed externally insulated composite panel system. This paper presents the details of finite element models developed to simulate the full scale fire tests of LSF wall panels under realistic design fires. Finite element models of LSF walls exposed to realistic design fires were developed, and analysed under both transient and steady state fire conditions using the measured stud time-temperature curves. Transient state analyses were performed to simulate fire test conditions while steady state analyses were performed to obtain the load ratio versus time and failure temperature curves of LSF walls. Details of the developed finite element models and the results including the axial deformation and lateral deflection versus time curves, and the stud failure modes and times are presented in this paper. Comparison with fire test results demonstrate the ability of developed finite element models to predict the performance and fire resistance ratings of LSF walls under realistic design fires.

The Deleuze Spray, New York 1977 : an Interview with Sanford Kwinter, Professor of Architectural Theory and Criticism at the Harvard Graduate School of Design, on the Architectural Reception of Gilles Deleuze in America

So what do you want to know? I was in Paris between ‘75 and ‘78. But about half way through, Sylvère published the Anti-Oedipus issue of Semiotext(e) and, actually, that was for me one of the deciding events that made me decide to come to the United States, to come study at Columbia University. There appeared to be this little group working at Columbia working around these issues. In 1970, in Paris even, Deleuze was a cult – there was an incredibly small number of people following Deleuze... A transcript of my Interview with Kwinter about the Architectural Reception of Deleuze in America, which took place at Jerry’s,' Soho, New York, 15 January 2003. The transcript appeared as an Appendix at the back of my Masters Thesis undertaken at Yale School of Architecture, printed May 2003.

The Use of Ecological Design to Achieve Sustainable Development in Queensland, Australia

This series of technical papers arose out of the action by a private entrepreneur to initiate a process beyond mere regulatory compliance in order to achieve best environmental practice at proposed large new visitor gateways to Australia’s Great Barrier Reef. Because of the complexity of issues involved at such urbanized downstream sites, the range of topics covered is wide – though still only those considered at this juncture to be of management priority. Included on this platform is one introductory paper reviewing the history of environmental management in the field in Queensland, and three papers which seek to appreciate the main techniques by which government contributes to the solutions viz. through the national park, threatened species list, and environmental impact assessment. The history paper was designed to allow the present series to be considered in broad context as well as performance to date. The work emphasizes that much of the fertile land that must be sustained nowadays lies in the province of the private sector, and that the initiative to create any new cost-effective paradigm in ecologically-sustainable practices lies mostly in their hands. In all instances, this strategic approach to large-scale property planning is through ecological design – using field case studies around the immediate biophysical catchment of the development, with attendant focus on the associated legal catchment (the actual development site) and the social catchment (the effective land managers). The first of these has given rise to a document termed a Regional Landscape Strategy, its implementation planned in concert with an Environmental Impact Assessment of the site and with a Strategic Regional Initiative (still being tested in the field) for community engagement. The first document takes into account the aspirations of government as expressed in its broad-scale regional plans.

Motivations and Intentions : A Case Study of Design-Led Activism

With a focus on intention and motivation, this paper describes a study involving three organisational communities and their collective effort to develop and provide more inclusive housing for people with disabilities and their families. While many studies, such as that by Rocha & Miles (2009), focus on commercial organisations, and sustainability from an economic perspective, this study involves a not-for-profit organisation (the accommodation and service provider) as well as a research organisation and a design action group volunteering their services free of charge. From this pro-bono context, the paper describes a case study that explores the nature of the collective as a basis for creative practice and political activism and the theoretical implications and wider application in terms of emerging research in the area of collaborative entrepreneurship and design activism.

How relevant are science curricula for rural and remote students?

This paper reports findings from the Choosing Science study (Lyons & Quinn, 2010) indicating that Australian Year 10 students in small rural or remote areas tend to regard their science lessons as less relevant than do students in larger towns and cities. Specifically, those in small rural or remote schools were significantly more inclined than their city peers to disagree that what they learned in science classes 'helped them make sense of the world'. They were also significantly more likely to strongly agree that they found science lessons boring, and to strongly disagree that science was one of the most interesting subjects. Potential explanations discussed include a mismatch between science curriculum content and the everyday experiences of students in these regions, the relative shortage of experienced specialist science teachers in rural or remote areas and a lack of opportunities to demonstrate the relevance of school science, among others. The paper considers the implications of these findings in relation to the Australian Science Curriculum and whether it is likely to better address the needs of rural and remote students.

Representations for evolutionary design modelling

This research looked at using the metaphor of biological evolution as a way of solving architectural design problems. Drawing from fields such as language grammars, algorithms and cellular biology, this thesis looked at ways of encoding design information for processing. The aim of this work is to help in the building of software that support the architectural design process and allow designers to examine more variations.