Translation of polarity cues into asymmetric spindle positioning in "Caenorhabditis elegans"

Abstract: Asymmetric cell division is important to generate tissue diversity. The Caenorhabditis elegans embryo is well suited to study the mechanisms of asymmetric cell division. In wild type one-cell stage embryos, the spindle sets up along the anterior-posterior axis (AP). During anaphase, the spindle elongates. While the anterior spindle pole is relatively immobile, the posterior spindle pole moves towards the posterior cortex during anaphase leading to an asymmetric spindle position. As a result, the first cleavage gives rise to a large anterior blastomere and a smaller posterior one, which differs also in cell fate determinants. This posterior spindle displacement occurs in response to polarity cues set up along the AP axis by the PAR proteins and is due to imbalanced pulling forces acting on the two spindle poles, with net forces acting on the posterior spindle pole being more extensive than those at the anterior one. The project of my thesis was to characterize the involvement of two new components, gpr-1 and gpr-2, in spindle positioning. These genes encode essentially identical proteins containing a GoLoco motif characteristic of proteins interacting with α subunits of heterotrimeric G protein (Gα). In gpr-1/2(RNAi) embryos and in embryos lacking simultaneously two α subunits, goa-1 and gpa-16, (Ga(RNAi) embryos), there is a minimal posterior displacement of the spindle during anaphase, and the first division is equal. I found that the pulling forces acting on the two spindle poles is weak and equal in gpr-1/2(RNAi) and Gα (RNAi) embryos. I found that GPR-1/2 acts downstream of polarity cues for generation of pulling forces. Furthermore, I showed that GPR-1/2 distribution was enriched at the posterior cortex during metaphase whereas GOA-1 and GPA-16 were uniformly distributed at the cell cortex throughout the cell cycle. Gα subunits oscillate between GDP- and GTP-bound forms. Gα signaling is turned on by GDP/GTP exchange catalyzed by guanine nucleotide exchange factors (GEFs) and turned off by hydrolysis of GTP catalyzed by GTPase activating proteins (GAPs). A third class of proteins, the guanine dissociation inhibitors (GDIs), binds the GDP-bound form of Gα subunits and inhibits nucleotide exchange. I found that GPR-1/2 acts as a GDI for GOA-1. Taken together, my findings suggest a model in which differential activation of Gα subunits along the AP axis may translate into generation of differential pulling forces on the anterior and posterior spindle poles, and, thus, asymmetric cell division. Résumé L'embryon du nématode Caenorhabditis elegans est un modèle approprié pour étudier les mécanismes de la division asymétrique. Chez l'embryon précoce, le fuseau mitotique se forme le long de l'axe antéro-postérieur (A/P) et au centre de l'embryon, le pôle antérieur restant relativement immobile alors que le pôle postérieur du fuseau se déplace vers le cortex postérieur au cours de l'anaphase conduisant à une position excentrée du fuseau. 11 en résulte une première division qui génère un blastomère antérieur et postérieur de grande et petite taille respectivement et qui diffèrent en facteurs développementaux. Ce déplacement postérieur se produit en réponse de la polarité établie par la distribution polarisée des protéines PAR et est le résultat de la génération de forces inégales tirant sur les deux pôles du fuseau, les forces agissant sur le pôle postérieur du fuseau étant plus grandes. Le projet de ma thèse était d'identifier la fonction de deux nouveaux constituants, gpr-1 et gpr-2 dans le positionnement asymétrique du fuseau. Ces gènes codent essentiellement pour la même protéine qui contient un motif GoLoco, caractéristique des protéines interagissant avec la sous-unité alpha des protéines G hétérotrimériques. Chez l'embryon gpr-1/2(RNAi) et chez les embryons dépourvus d'activité de deux sous-unités alpha, goa-1 et gpa-16, (Gα(RNAi)), j'ai montré qu'il y avait un déplacement minimal du fuseau vers le pôle postérieur au cours de l'anaphase et la première division est symétrique en raison de forces faibles et égales agissant sur les deux pôles du fuseau. J'ai également montré que gpr-1/2 était requis en aval des signaux établissant la polarité pour générer les forces responsables du positionnement asymétrique du fuseau. De plus, j'ai montré que GPR-1/2 était enrichi au pôle postérieur lors de la métaphase alors que GOA-1 et GPA-16 étaient localisés de façon uniforme au cortex de l'embryon précoce. Gas oscillent entre une forme liée au GDP et une forme liée au GTP. La signalisation des Gas est activée par l'échange GDP/GTP qui est catalysé par des protéines GEFs. La signalisation des Gas est désactivée par l'hydrolyse du GTP qui est catalysée par des protéines GAPs. Une troisième classe de protéines, GDIs lie la forme GDP et inhibe l'échange de nucléotides. J'ai montré que GPR-1/2 agissait comme un GDI pour GOA-1. Mes résultats suggèrent un modèle dans lequel une activation différentielle des Gα le long de l'axe A/P pourrait générer des forces différentielles sur le pôle antérieur et postérieur du fuseau.

Formation and Control of Trace Metal Emissions in Co-Firing of Biomass, Peat, and Wastes in Fluidised Bed Combustors

Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.

Investigation of interaction between native and impurity defects in ZnSe

Zinc selenide is a prospective material for optoelectronics. The fabrication of ZnSe­based light-emitting diodes is hindered by complexity of p-type doping of the component materials. The interaction between native and impurity defects, the tendency of doping impurity to form associative centres with native defects and the tendency to self-compensation are the main factors impeding effective control of the value and type of conductivity. The thesis is devoted to the study of the processes of interaction between native and impurity defects in zinc selenide. It is established that the Au impurity has the most prominent amphoteric properties in ZnSe among Cu, Ag and Au impurities, as it forms a great number of both Au; donors and Auz„ acceptors. Electrical measurements show that Ag and Au ions introduced into vacant sites of the Zn sublattice form simple single-charged Agz„+ and Auzn+ states with d1° electron configuration, while Cu ions can form both single-charged Cuz„ (d1) and double-charged Cuzr`+ (d`o) centres. Amphoteric properties of Ag and Au transition metals stimulated by time are found for the first time from both electrical and luminescent measurements. A model that explains the changes in electrical and luminescent parameters by displacement of Ag ions into interstitial sites due to lattice deformation forces is proposed. Formation of an Ag;-donor impurity band in ZnSe samples doped with Ag and stored at room temperature is also studied. Thus, the properties of the doped samples are modified due to large lattice relaxation during aging. This fact should be taken into account in optoelectronic applications of doped ZnSe and related compounds.

Disponibilitat per a les plantes de Mn, Cu, Zn i Cd en els sòls de diferents sistemes agrícoles a Catalunya

Es va avaluar el contingut del sòl en Mn, Cu, Zn, Ni i Cd fent una extracció amb DTPA, segons el mètode de Lindsay i Norvell (1969). Les mostres analitzades procedien de parcel·les agrícoles d'arreu de Catalunya, conservades al Banc de Mostres de Sòls del Mapa de Sòls de Catalunya del DARP. Els resultats es van agrupar per sistemes agrícoles en funció de l'origen de les mostres, ja que dins de cada un es pot assumir una reducció important en l'interval de variació de diferents factors. Es va realitzar una comparació estadística entre els valors mitjans dels diferents sistemes agrícoles, entre els valors mitjans de les dues profunditats de sòl considerades, i una interpretació agronòmica. Els resultats van indicar que els sòls procedents d'horticultura intensiva del Maresme són els que tenen continguts disponibles més elevats dels metalls considerats. D'altra banda, es fa palès que els valors estan condicionats tant pel material originari del sòl com per l'acció antròpica. Per al Cu i el Zn en les mostres de sòls del Maresme els continguts trobats estan molt per sobre dels mínims considerats com a agronòmicament satisfactoris.

Global surveillance of cancer survival 1995-2009 : analysis of individual data for 25 676 887 patients from 279 population-based registries in 67 countries (CONCORD-2)

BACKGROUND: Worldwide data for cancer survival are scarce. We aimed to initiate worldwide surveillance of cancer survival by central analysis of population-based registry data, as a metric of the effectiveness of health systems, and to inform global policy on cancer control. METHODS: Individual tumour records were submitted by 279 population-based cancer registries in 67 countries for 25·7 million adults (age 15-99 years) and 75 000 children (age 0-14 years) diagnosed with cancer during 1995-2009 and followed up to Dec 31, 2009, or later. We looked at cancers of the stomach, colon, rectum, liver, lung, breast (women), cervix, ovary, and prostate in adults, and adult and childhood leukaemia. Standardised quality control procedures were applied; errors were corrected by the registry concerned. We estimated 5-year net survival, adjusted for background mortality in every country or region by age (single year), sex, and calendar year, and by race or ethnic origin in some countries. Estimates were age-standardised with the International Cancer Survival Standard weights. FINDINGS: 5-year survival from colon, rectal, and breast cancers has increased steadily in most developed countries. For patients diagnosed during 2005-09, survival for colon and rectal cancer reached 60% or more in 22 countries around the world; for breast cancer, 5-year survival rose to 85% or higher in 17 countries worldwide. Liver and lung cancer remain lethal in all nations: for both cancers, 5-year survival is below 20% everywhere in Europe, in the range 15-19% in North America, and as low as 7-9% in Mongolia and Thailand. Striking rises in 5-year survival from prostate cancer have occurred in many countries: survival rose by 10-20% between 1995-99 and 2005-09 in 22 countries in South America, Asia, and Europe, but survival still varies widely around the world, from less than 60% in Bulgaria and Thailand to 95% or more in Brazil, Puerto Rico, and the USA. For cervical cancer, national estimates of 5-year survival range from less than 50% to more than 70%; regional variations are much wider, and improvements between 1995-99 and 2005-09 have generally been slight. For women diagnosed with ovarian cancer in 2005-09, 5-year survival was 40% or higher only in Ecuador, the USA, and 17 countries in Asia and Europe. 5-year survival for stomach cancer in 2005-09 was high (54-58%) in Japan and South Korea, compared with less than 40% in other countries. By contrast, 5-year survival from adult leukaemia in Japan and South Korea (18-23%) is lower than in most other countries. 5-year survival from childhood acute lymphoblastic leukaemia is less than 60% in several countries, but as high as 90% in Canada and four European countries, which suggests major deficiencies in the management of a largely curable disease. INTERPRETATION: International comparison of survival trends reveals very wide differences that are likely to be attributable to differences in access to early diagnosis and optimum treatment. Continuous worldwide surveillance of cancer survival should become an indispensable source of information for cancer patients and researchers and a stimulus for politicians to improve health policy and health-care systems. FUNDING: Canadian Partnership Against Cancer (Toronto, Canada), Cancer Focus Northern Ireland (Belfast, UK), Cancer Institute New South Wales (Sydney, Australia), Cancer Research UK (London, UK), Centers for Disease Control and Prevention (Atlanta, GA, USA), Swiss Re (London, UK), Swiss Cancer Research foundation (Bern, Switzerland), Swiss Cancer League (Bern, Switzerland), and University of Kentucky (Lexington, KY, USA).

Diffraction grating couplers milled in Si3N4 rib waveguides with a focused ion beam

Focused ion beam milling is a processing technology which allows flexible direct writing of nanometer scale features efficiently substituting electron beam lithography. No mask need results in ability for patterns writing even on fragile micromechanical devices. In this work we studied the abilities of the tool for fabrication of diffraction grating couplers in silicon nitride waveguides. The gratings were fabricated on a chip with extra fragile cantilevers of sub micron thickness. Optical characterization of the couplers was done using excitation of the waveguides in visible range by focused Gaussian beams of different waist sizes. Influence of Ga+ implantation on the device performance was studied.

A detailed stream sediment Geochemical survey in the Canoves St. Pere de Vilamajor area (Montseny massif. NE Spain)

Se ha realizado una prospección geoquímica táctica de sedimentos aluviales en el Brea de Cánoves-St. Pere de Vilamajor (Macizo del Montseny, Barcelona), como consecuencia de una exploración geoquimica estratégica de sedimentos aluviales previa, en la que se localizó un Brea anómala en Pb, Zn, Cu, As, Cd, Ni, y Co. El Brea estudiada tiene 35 km2 y esta constituida por materiales sedimentarios y volcánicos del Paleozoico, metamorfizados en mayor o menor grado e intruidos por el granito de Vallfornés, y materiales detríticos terciarios...

Fruit size and quality of pineapples cv. Vitória in response to micronutrient doses and way of application and to soil covers

The objective of this study was to evaluate the effects of foundation and leaf fertilization with micronutrients on fruit size and quality of pineapple cv. Vitória under the environmental conditions of the Baixo Acaraú irrigated perimeter in Northern Ceará State, Brazil, under two covers (bagana and black plastic) of the sandy soil of low fertility. The experimental design was a randomized split blocks one with four levels of soil dressing and four levels of foliar fertilization, with five replications. Micronutrient soil dressing was studied as FTE-12 at doses of 0, 60, 120 and 180 kg ha-1. The four levels of foliar fertilization were: LF0 (without fertilizer), LF 1 (15 leaf fertilization, using the amount of 1158.75 g Fe ha-1, 844.65 g Mn ha-1, 391.5 g ha-1 Zn, 322.65 g ha-1 Cu and 216 g ha-1 B), LF2 (15 leaf fertilization, using twice the quantities of level LF1) and LF3 (15 leaf fertilization, using three times the amount of level LF1). At 13 months after planting the micropropagated plantlets was carried out the floral induction treatment and five months later the fruit harvest determining the following variables: fruit weight and median diameter, soluble solids content (SS) and titratable acidity (TA). Both fruit weight and diameter increased with increasing doses of micronutrients applied to the soil and to the leaves, of plants grown both on bagana soil cover and plastic mulch. On the other hand fruit pulp quality was little affected by the treatments studied. There were a small increase of SS contents for plants grown on bagana soil cover and a small decrease of titratable acidity for those grown on plastic mulch, in both cases just in response to micronutrient foliar application.

Leaf nutritional levels in peach and nectarine grown in subtropical climate

The study evaluated the leaf nutritional levels of peach and nectarine trees under subtropical climate in order to improve the fertilization practices. The experiment was carried out in São Paulo state University, Botucatu, São Paulo State, Brazil. The experimental design consisted of subdivided plots, in which plots corresponded to cultivars and subplots to the leaf sample periods. The evaluated peach cultivars were: Marli, Turmalina, Precocinho, Jubileu, Cascata 968, Cascata 848, CP 951C, CP 9553CYN, and Tropic Beauty, and that of nectarine was 'Sun Blaze'. The sample periods were: after harvest, plants in vegetative period; dormancy; beginning of flowering and fruiting (standard sample). Results indicated significant variations in the levels of N, P, K, Ca, Mg, S, B, Cu, Fe, Mn and Zn for the sampling period and in N, Ca, Mg, S, B, Fe and Mn levels for the cultivars.

Geology of the Cerro-Quema Au-Cu deposit (Azuero Peninsula, Panama)

The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a Cretaceous-Paleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late Cretaceous-Oligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.

Characterization of nutrient deficiency in Hancornia speciosa Gomes seedlings by omitting micronutrients from the nutrient solution

Hancornia speciosa Gomes (Mangaba tree) is a fruit tree belonging to the Apocynaceae family and is native to Brazil. The production of seedlings of this species is limited by a lack of technical and nutritional expertise. To address this deficiency, this study aimed to characterize the visual symptoms of micronutrient deficiency and to assess growth and leaf nutrient accumulation in H. speciosa seedlings supplied with nutrient solutions that lack individual micronutrients. H. speciosa plants were grown in nutrient solution in a greenhouse according to a randomized block design, with four replicates. The treatments consisted of a group receiving complete nutrient solution and groups treated with a nutrient solution lacking one of the following micronutrients: boron (B), copper (Cu), iron (Fe), manganese (Mn), zinc (Zn), and molybdenum (Mo). The visual symptoms of nutrient deficiency were generally easy to characterize. Dry matter production was affected by the omission of micronutrients, and the treatment lacking Fe most limited the stem length, stem diameter, root length, and number of leaves in H. speciosa seedlings as well as the dry weight of leaves, the total dry weight, and the relative growth in H. speciosa plants. The micronutrient contents of H. speciosa leaves from plants receiving the complete nutrient solution treatment were, in decreasing order, Fe>Mn>Cu>Zn>B.

Metal dealing at the origin of the Chordata phylum: The metallothionein system and metal overload response in Amphioxus.

Non-vertebrate chordates, specifically amphioxus, are considered of the utmost interest for gaining insight into the evolutionary trends, i.e. differentiation and specialization, of gene/protein systems. In this work, MTs (metallothioneins), the most important metal binding proteins, are characterized for the first time in the cephalochordate subphylum at both gene and protein level, together with the main features defining the amphioxus response to cadmium and copper overload. Two MT genes (BfMT1 and BfMT2) have been identified in a contiguous region of the genome, as well as several ARE (antioxidant response element) and MRE (metal response element) located upstream the transcribed region. Their corresponding cDNAs exhibit identical sequence in the two lancelet species (B. floridae and B. lanceolatum), BfMT2 cDNA resulting from an alternative splicing event. BfMT1 is a polyvalent metal binding peptide that coordinates any of the studied metal ions (Zn, Cd or Cu) rendering complexes stable enough to last in physiological environments, which is fully concordant with the constitutive expression of its gene, and therefore, with a metal homeostasis housekeeping role. On the contrary, BfMT2 exhibits a clear ability to coordinate Cd(II) ions, while it is absolutely unable to fold into stable Cu (I) complexes, even as mixed species. This identifies it as an essential detoxification agent, which is consequently only induced in emergency situations. The cephalochordate MTs are not directly related to vertebrate MTs, neither by gene structure, protein similarity nor metal-binding behavior of the encoded peptides. The closest relative is the echinoderm MT, which confirm proposed phylogenetic relationships between these two groups. The current findings support the existence in most organisms of two types of MTs as for their metal binding preferences, devoted to different biological functions: multivalent MTs for housekeeping roles, and specialized MTs that evolve either as Cd-thioneins or Cu-thioneins, according to the ecophysiological needs of each kind of organisms.

Production and quality of Anacardium othonianum Rizz. seedlings grown in different substrates

This study aimed to evaluate the effect of substrate on growth, emergence, nutrition, and quality of Anacardium othonianum Rizz. (cerrado cashew tree) seedlings. The experiment was conducted in a greenhouse at the Plant Tissue Culture Laboratory on the Rio Verde campus. The following substrates were used: 1) Bioplant®, 2) Mecplant® (MP) + carbonized rice husk (CRH) (7:3), 3) fine-grained vermiculite (FGV), 4) FGV+CRH (3:1), 5) FGV+CRH (1:1), 6) FGV+CRH (1:3), and 7) sugarcane bagasse (SB) + sugarcane mill filter cake (FC) (3:2). Emerged seedlings were counted at 2-day intervals for 38 days following emergence of the first seedling. At 39, 64, and 89 days after seeding (DAS), the following variables were measured: stem length (SL), stem diameter (SD), and number of leaves (NL). Accumulated dry weight, quality indices, and leaf macro- and micronutrient levels were determined at 89 DAS. Plants grown in the FGV and FGV+CFH (1:3) substrates had shorter stem lengths than the plants grown in other substrates. Increases in seedling growth were smaller between 64 and 89 DAS compared to the initial period of the experiment. The highest leaf N concentrations were found in the SB+FC substrate treatment group; P and K concentrations were higher for the MP+CRH (7:3), SB+FC, and Bioplant® treatments; and Ca levels were higher for the SB+FC and MP+CRH (7:3) substrate treatments. The MP+CRH (7:3) substrate treatment group had the highest leaf B and Mn micronutrient concentrations, and plants from the Bioplant® substrate group had the highest leaf B micronutrient content. Mg, S, Cu, Zn, and Fe concentrations did not differ among the different substrates. The plant traits that differed most among the treatments included stem length for the FGV and FGV+CRH (1:3) substrate groups and leaf nutrient concentrations, which were higher for the SB+FC group followed by the MP+CRH and Bioplant® treatments.

Oxygen adsorption on clean and oxygen precovered Cu(100)

Kuparipinnan hapettumisen alkuvaiheet ovat vielä nykyisin tutkijoille epäselviä. Kuitenkin, jotta hapettumisprosessia voitaisiin säädellä, on sangen tärkeää ymmärtää mistä varsinainen hapettuminen lähtee liikkeelle ja mitkä ovat hapettumisen seuraavat vaiheet. Tähän kysymykseen haetaan vastauksia tässä työssä käyttäen puhtaasti teoreettisia menetelmiä pinnan käsittelyssä. Aikaisempien teoreettisten ja kokeellisten tutkimusten välillä on pieni ristiriita liittyen hapen tarttumistodennäköisyyteen. Teoreettisten tutkimusten mukaan happi ei puhtaalle pinnalle tullessaan näe potentiaalivallia, mutta kokeelliset tutkimukset osoittavat sellaisen kuitenkin olevan. Tuohon ristiriitaan pureudutaan käyttäen aikaisemmista laskuista poikkeavaa kvanttimekaaniseen molekyylidynamiikkaan perustuvaa lähestymistapaa. Työssä havaitaan, että aikaisemmin yleisesti käytetty menetelmä hukkaa huomattavan määrän tietoa ja siten tutkijat eivät voi ainoastaan tyytyä tarkastelemaan kyseisellä menetelmällä saatuja tuloksia. Kuparipinnalle havaittiin, että korkeilla molekyylin kineettisen energian arvolla aikaisemmin suoritetut laskut hajottavista trajektoreista pitävät paikkansa, mutta matalilla kineettisen energian arvoilla molekyyli kohtaa erittäin voimakkaan ``steering'' vaikutuksen ja trajektorit joiden piti olla hajottavia johtavatkin molekulaariseen adsorptioon. Kun hapen konsentraatio pinnalla on suurempi kuin 0.5 ML, pinta rekonstruoituu. Myös rekonstruktion jälkeistä pintaa on tutkittu samanlaisilla menetelmillä kuin puhdasta pintaa. Rekonstruoituneelle pinnalle ei löydetty hajottavia trajektoreita ja havaittiin, että hapelle annetun kineettisen energian matalilla arvoilla myös tässä tapauksessa on erittäin voimakas ``steering'' vaikutus.

Hardness of FRHC-Cu determined by statistical analysis

A statistical indentation method has been employed to study the hardness value of fire-refined high conductivity copper, using nanoindentation technique. The Joslin and Oliver approach was used with the aim to separate the hardness (H) influence of copper matrix, from that of inclusions and grain boundaries. This approach relies on a large array of imprints (around 400 indentations), performed at 150 nm of indentation depth. A statistical study using a cumulative distribution function fit and Gaussian simulated distributions, exhibits that H for each phase can be extracted when the indentation depth is much lower than the size of the secondary phases. It is found that the thermal treatment produces a hardness increase, due to the partly re-dissolution of the inclusions (mainly Pb and Sn) in the matrix.