Gene expression promoted by the SV40 DNA targeting sequence and the hypoxia-responsive element under normoxia and hypoxia

The main objective of the present study was to find suitable DNA-targeting sequences (DTS) for the construction of plasmid vectors to be used to treat ischemic diseases. The well-known Simian virus 40 nuclear DTS (SV40-DTS) and hypoxia-responsive element (HRE) sequences were used to construct plasmid vectors to express the human vascular endothelial growth factor gene (hVEGF). The rate of plasmid nuclear transport and consequent gene expression under normoxia (20% O2) and hypoxia (less than 5% O2) were determined. Plasmids containing the SV40-DTS or HRE sequences were constructed and used to transfect the A293T cell line (a human embryonic kidney cell line) in vitro and mouse skeletal muscle cells in vivo. Plasmid transport to the nucleus was monitored by real-time PCR, and the expression level of the hVEGF gene was measured by ELISA. The in vitro nuclear transport efficiency of the SV40-DTS plasmid was about 50% lower under hypoxia, while the HRE plasmid was about 50% higher under hypoxia. Quantitation of reporter gene expression in vitro and in vivo, under hypoxia and normoxia, confirmed that the SV40-DTS plasmid functioned better under normoxia, while the HRE plasmid was superior under hypoxia. These results indicate that the efficiency of gene expression by plasmids containing DNA binding sequences is affected by the concentration of oxygen in the medium.

New multilocus sequence typing of MRSA in São Paulo, Brazil

An increased incidence of nosocomial and community-acquired infections caused by methicillin-resistant Staphylococcus aureus (MRSA) has been observed worldwide. The molecular characterization of MRSA has played an important role in demonstrating the existence of internationally disseminated clones. The use of molecular biology methods in the surveillance programs has enabled the tracking of MRSA spread within and among hospitals. These data are useful to alert nosocomial infection control programs about the potential introduction of these epidemic clones in their areas. Four MRSA blood culture isolates from patients hospitalized at two hospitals in the city of São Paulo, Brazil, were analyzed; one of them was community acquired. The isolates were characterized as SCCmec, mecA and PVL by PCR, pulsed-field gel electrophoresis (PFGE) profile and molecular sequence typing (MLST) genotyping. The isolates presented type IV SCCmec, and none proved to be positive for PVL. The isolates showed a PFGE profile similar to the pediatric clone. MLST genotyping demonstrated that the isolates belonged to clonal complex 5 (CC5), showing a new yqiL allele gene, resulting in a new sequence typing (ST) (1176). Our results showed that strains of MRSA carrying a new ST are emerging in community and nosocomial infections, including bacteremia, in São Paulo, Brazil.

Coping with genetic diversity: the contribution of pathogen and human genomics to modern vaccinology

Vaccine development faces major difficulties partly because of genetic variation in both infectious organisms and humans. This causes antigenic variation in infectious agents and a high interindividual variability in the human response to the vaccine. The exponential growth of genome sequence information has induced a shift from conventional culture-based to genome-based vaccinology, and allows the tackling of challenges in vaccine development due to pathogen genetic variability. Additionally, recent advances in immunogenetics and genomics should help in the understanding of the influence of genetic factors on the interindividual and interpopulation variations in immune responses to vaccines, and could be useful for developing new vaccine strategies. Accumulating results provide evidence for the existence of a number of genes involved in protective immune responses that are induced either by natural infections or vaccines. Variation in immune responses could be viewed as the result of a perturbation of gene networks; this should help in understanding how a particular polymorphism or a combination thereof could affect protective immune responses. Here we will present: i) the first genome-based vaccines that served as proof of concept, and that provided new critical insights into vaccine development strategies; ii) an overview of genetic predisposition in infectious diseases and genetic control in responses to vaccines; iii) population genetic differences that are a rationale behind group-targeted vaccines; iv) an outlook for genetic control in infectious diseases, with special emphasis on the concept of molecular networks that will provide a structure to the huge amount of genomic data.

Sequence analysis of the 5′ third of glycoprotein C gene of South American bovine herpesviruses 1 and 5

Bovine herpesviruses 1 (BoHV-1) and 5 (BoHV-5) share high genetic and antigenic similarities, but exhibit marked differences in tissue tropism and neurovirulence. The amino-terminal region of glycoprotein C (gC), which is markedly different in each of the viruses, is involved in virus binding to cellular receptors and in interactions with the immune system. This study investigated the genetic and antigenic differences of the 5′ region of the gC (5′ gC) gene (amino-terminal) of South American BoHV-1 (n=19) and BoHV-5 (n=25) isolates. Sequence alignments of 374 nucleotides (104 amino acids) revealed mean similarity levels of 97.3 and 94.2% among BoHV-1 gC (gC1), respectively, 96.8 and 95.6% among BoHV-5 gC (gC5), and 62 and 53.3% between gC1 and gC5. Differences included the absence of 40 amino acid residues (27 encompassing predicted linear epitopes) scattered throughout 5′ gC1 compared to 5′ gC5. Virus neutralizing assays testing BoHV-1 and BoHV-5 antisera against each isolate revealed a high degree of cross-neutralization between the viruses, yet some isolates were neutralized at very low titers by heterologous sera, and a few BoHV-5 isolates reacted weakly with either sera. The virus neutralization differences observed within the same viral species, and more pronounced between BoHV-1 and BoHV-5, likely reflect sequence differences in neutralizing epitopes. These results demonstrate that the 5′ gC region is well conserved within each viral species but is divergent between BoHV-1 and BoHV-5, likely contributing to their biological and antigenic differences.

The consensus sequence of FAMLF alternative splice variants is overexpressed in undifferentiated hematopoietic cells

The familial acute myeloid leukemia related factor gene (FAMLF) was previously identified from a familial AML subtractive cDNA library and shown to undergo alternative splicing. This study used real-time quantitative PCR to investigate the expression of the FAMLF alternative-splicing transcript consensus sequence (FAMLF-CS) in peripheral blood mononuclear cells (PBMCs) from 119 patients with de novo acute leukemia (AL) and 104 healthy controls, as well as in CD34+cells from 12 AL patients and 10 healthy donors. A 429-bp fragment from a novel splicing variant of FAMLF was obtained, and a 363-bp consensus sequence was targeted to quantify total FAMLF expression. Kruskal-Wallis, Nemenyi, Spearman's correlation, and Mann-Whitney U-tests were used to analyze the data. FAMLF-CS expression in PBMCs from AL patients and CD34+ cells from AL patients and controls was significantly higher than in control PBMCs (P<0.0001). Moreover,FAMLF-CS expression in PBMCs from the AML group was positively correlated with red blood cell count (rs=0.317, P=0.006), hemoglobin levels (rs=0.210, P=0.049), and percentage of peripheral blood blasts (rs=0.256, P=0.027), but inversely correlated with hemoglobin levels in the control group (rs=–0.391, P<0.0001). AML patients with high CD34+ expression showed significantly higherFAMLF-CS expression than those with low CD34+ expression (P=0.041). Our results showed thatFAMLF is highly expressed in both normal and malignant immature hematopoietic cells, but that expression is lower in normal mature PBMCs.

Issues in the Transatlantic Trade and Investment Partnership: A critical discourse analysis

Negotiating trade agreements is an important part of government trade policies, economic planning and part of the globally operating trading system of today. European Union and the United States have been active in the formation of trade agreements in global comparison. Now these two economic giants are engaged in negotiations to form their own trade agreement, the so called Transnational Trade and Investment Partnership (TTIP). The purpose of this thesis is to understand the reasons for making a trade agreement between two economic areas and understanding the issues it may include in the case of the TTIP. The TTIP has received a great deal of attention in the media. The opinions towards the partnership have been extreme, and the debate has been heated. The purpose of this study is to introduce the nature of the public discussion regarding the TTIP from Spring 2013 until 2014. The research problem is to find out what are the main issues in the agreement and what are the values influencing them. The study was conducted applying methods of critical discourse analysis to the chosen data. This includes gathering the issues from the data based on the attention each has received in the discussion. The underlying motives for raising different issues were analysed by investigating the authors’ position in the political, economic and social circuits. The perceived economic impacts of the TTIP are also under analysis with the same criteria. Some of the most respected economic newspapers globally were included in the research material as well as papers or reports published by the EU and global organisations. The analysis indicates a clear dichotomy of the attitudes towards the TTIP. Key problems include lack of transparency in the negotiations, the misunderstood investor-state dispute settlement, the constantly expanding regulatory issues and the risk of protectionism. The theory and data does suggest that the removal of tariffs is an effective tool for reaching economic gains in the TTIP and even more effective would be the reducing of non-tariff barriers, such as protectionism. Critics are worried over the rising influence of corporations over governments. The discourse analysis reveals that the supporters of the TTIP have values related to increasing welfare through economic growth. Critics do not deny the economic benefits but raise the question of inequality as a consequence. Overall they represent softer values such as sustainable development and democracy as a counter-attack to the corporate values of efficiency and the maximising of profits.

Asleep or not asleep? Evaluation of the Quality of Patients’ Sleep in Critical Care Nursing

Sleep is important for the recovery of a critically ill patient, as lack of sleep is known to influence negatively a person’s cardiovascular system, mood, orientation, and metabolic and immune function and thus, it may prolong patients’ intensive care unit (ICU) and hospital stay. Intubated and mechanically ventilated patients suffer from fragmented and light sleep. However, it is not known well how non-intubated patients sleep. The evaluation of the patients’ sleep may be compromised by their fatigue and still position with no indication if they are asleep or not. The purpose of this study was to evaluate ICU patients’ sleep evaluation methods, the quality of non-intubated patients’ sleep, and the sleep evaluations performed by ICU nurses. The aims were to develop recommendations of patients’ sleep evaluation for ICU nurses and to provide a description of the quality of non-intubated patients’ sleep. The literature review of ICU patients’ sleep evaluation methods was extended to the end of 2014. The evaluation of the quality of patients’ sleep was conducted with four data: A) the nurses’ narrative documentations of the quality of patients’ sleep (n=114), B) the nurses’ sleep evaluations (n=21) with a structured observation instrument C) the patients’ self-evaluations (n=114) with the Richards-Campbell Sleep Questionnaire, and D) polysomnographic evaluations of the quality of patients’ sleep (n=21). The correspondence of data A with data C (collected 4–8/2011), and data B with data D (collected 5–8/2009) were analysed. Content analysis was used for the nurses’ documentations and statistical analyses for all the other data. The quality of non-intubated patients’ sleep varied between individuals. In many patients, sleep was light, awakenings were frequent, and the amount of sleep was insufficient as compared to sleep in healthy people. However, some patients were able to sleep well. The patients evaluated the quality of their sleep on average neither high nor low. Sleep depth was evaluated to be the worst and the speed of falling asleep the best aspect of sleep, on a scale 0 (poor sleep) to 100 (good sleep). Nursing care was mostly performed while the patients were awake, and thus the disturbing effect was low. The instruments available for nurses to evaluate the quality of patients’ sleep were limited and measured mainly the quantity of sleep. Nurses’ structured observatory evaluations of the quality of patients’ sleep were correct for approximately two thirds of the cases, and only regarding total sleep time. Nurses’ narrative documentations of the patients’ sleep corresponded with patients’ self-evaluations in just over half of the cases. However, nurses documented several dimensions of sleep that are not included in the present sleep evaluation instruments. They could be classified according to the components of the nursing process: needs assessment, sleep assessment, intervention, and effect of intervention. Valid, more comprehensive sleep evaluation methods for nurses are needed to evaluate, document, improve and study patients’ quality of sleep.

Introducing the concept of critical Fo in batch heat processing

The determination of the sterilization value for low acid foods in retorts includes a critical evaluation of the factory's facilities and utilities, validation of the heat processing equipment (by heat distribution assays), and finally heat penetration assays with the product. The intensity of the heat process applied to the food can be expressed by the Fo value (sterilization value, in minutes, at a reference temperature of 121.1 °C, and a thermal index, z, of 10 °C, for Clostridium botulinum spores). For safety reasons, the lowest value for Fo is frequently adopted, being obtained in heat penetration assays as indicative of the minimum process intensity applied. This lowest Fo value should always be higher than the minimum Fo recommended for the food in question. However, the use of the Fo value for the coldest can fail to statistically explain all the practical occurrences in food heat treatment processes. Thus, as a result of intense experimental work, we aimed to develop a new focus to determine the lowest Fo value, which we renamed the critical Fo. The critical Fo is based on a statistical model for the interpretation of the results of heat penetration assays in packages, and it depends not only on the Fo values found at the coldest point of the package and the coldest point of the equipment, but also on the size of the batch of packages processed in the retort, the total processing time in the retort, and the time between CIPs of the retort. In the present study, we tried to explore the results of physical measurements used in the validation of food heat processes. Three examples of calculations were prepared to illustrate the methodology developed and to introduce the concept of critical Fo for the processing of canned food.

Effect of the implementation of the Hazard Analysis Critical Control Point (HACCP) prerequisite program in an institutional foodservice unit in Southern Brazil

The aims of this study were to investigate the hygienic practices in the food production of an institutional foodservice unit in Southern Brazil and to evaluate the effect of implementing good food handling practices and standard operational procedures using microbiological hygiene indicators. An initial survey of the general operating conditions classified the unit as regular in terms of compliance with State safety guidelines for food service establishments. An action plan that incorporated the correction of noncompliance issues and the training of food handlers in good food handling practices and standard operational procedures were then implemented. The results of the microbiological analysis of utensils, preparation surfaces, food handlers' hands, water, and ambient air were recorded before and after the implementation of the action plan. The results showed that the implementation of this type of practice leads to the production of safer foods.

Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP) plan in lobster processing industries

This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.

Critical success factors for improving societal effectiveness of transport sector's R&D

This study investigates societal effectiveness of transport sector’s Research & Development (R&D) operations. In this study effectiveness refers to organization’s capability to produce the intended and desired impacts through its operations. The aim of this study is to identify the motives for evaluating societal effectiveness and recognize the critical success factors for improving effectiveness. The theoretical framework focuses first in the policy context of effectiveness evaluation in public sector and secondly the framework introduces the concept and process of effectiveness evaluation. The empirical part is carried out as a case study, which investigates societal effectiveness of Finnish Transport Agency’s (FTA’s) R&D. The aim is to recognize FTA’s critical success factors for improving R&D operations’ societal effectiveness. Based on these factors, the organization is able to define indicators for measuring effectiveness in the future operations. In this study societal effectiveness is investigated from R&D purchasers’ and R&D end- users’ points of views according to Purchaser-Provider-model. The results indicate that societal effectiveness evaluation is important part of R&D operations, but the implementation of the evaluation as part of daily operations is challenging. Because of limited resources, the organization is forced to strong priorization and therefore R&D tasks are secondary after the operational tasks. Based on the results the critical success factors can be recognized as resources and priorization, clear strategy and objectives, internal communications, cooperation between public and private sector and R&D implementation and dissemination.