Environmental and social impact monitoring of the Bujagali Hydropower Project (BHPP), Uganda Fisheries Component: monthly patterns in physico-chemical conditions and fish catch in the immediate vicinity of the Bujagali Hydropower construction site, 29th September - 28th October 2007

Following the commencement of construction works of a 250 MW hydropower plant at Dumbbell Island in the Upper Victoria Nile in September 2007, BEL requested NaFIRRI to conduct continuous monitoring of fish catches at two transects i.e. the immediate upstream transect of the project site (Kalange-Makwanzi) and the immediate downstream .transect (Buyala-Kikubamutwe). The routine monitoring surveys were designed to be conducted twice a week at each of the tWo transects. It was anticipated that major immediate impacts were to occur during construction, and these needed to be known by BEL as part of a mitigation strategy. For example, the construction of it cofferdam could be accompanied by rapid changes in water quality and quantity downstream of the construction. These changes in turn could affect the fish catch and would probably be missed by the quarterly monitoring already in place. Therefore, a major cbjective of the more regular and rapid monitoring was to discern immediate impacts of construction activities by focusing on selected water quality parameters (total suspended solids, water conductivity, temperature, dissolved oxygen and pH) and fish catch characteristics (total catch, catch rates and value of the catch)

Diffusion and chemical reaction in the porous structures of solid oxide fuel cells

The Rolls-Royce Integrated-Planar Solid Oxide Fuel Cell (IP-SOFC) consists of ceramic modules which have electrochemical cells printed on the outer surfaces. The cathodes are the outermost layer of each cell and are supplied with oxygen from air flowing over the outside of the module. The anodes are in direct contact with the ceramic structure and are supplied with fuel from internal gas channels. Natural gas is reformed into hydrogen for use by the fuel cells in a separate reformer module of similar design except that the fuel cells are replaced by a reforming catalyst layer. The performance of the modules is intrinsically linked to the behaviour of the gas flows within their porous structures. Because the porous layers are very thin, a one-dimensional flow model provides a good representation of the flow property variations between fuel channel and fuel cell or reforming catalyst. The multi-component convective-diffusive flows are simulated using a new theory of flow in porous material, the Cylindrical Pore Interpolation Model. The effects of the catalysed methane reforming and water-gas shift chemical reactions are also considered using appropriate kinetic models. It is found that the shift reaction, which is catalysed by the anode material, has certain beneficial effects on the fuel cell module performance. In the reformer module it was found that the flow resistance of the porous support structure makes it difficult to sustain a high methane conversion rate. Although the analysis is based on IP-SOFC geometry, the modelling approach and general conclusions are applicable to other types of SOFC.

The role of social,economic and cultural factors in the management of satellite lake fisheries in Uganda

The fisheries of small lakes are important for producing fish for local populations not clear the larger lakes.The satelite support important fisheries and other economic activities like fishing water for domestic purpose and tourism besides socio-cultural functions.

The distribution of anostraca and conchostraca (Crustacea) in the Jaffna Peninsula

The purpose of the present study was to determine the types of anostracans and conchostracans in the Jaffna Peninsula and their distribution in relation to ecological factors, as until now only two species have been mentioned from Jaffna. The present study forms a part of a major project to study the freshwater fauna and their distribution in the Jaffna Peninsula. This work is also a first ecological study on anostracans and conchostracans in Sri Lanka.

Salt and water balance in the Mundel Lake: a strongly choked coastal lagoon

The Mundel Lake is an extremely shallow lagoon on the west coast of Sri Lanka. It is connected to the Puttalam Lagoon through 15 km long Dutch Canal. Salinity measurements and daily sea level data were obtained fortnightly from January 1993 to March 1994 and they were used to quantify the salt and water budget along with precipitation, evaporation and freshwater runoff. Extreme fluctuations of salinity and sea level are striking features of the system. Salinity of the Mundel Lake and Dutch Canal varied from 5-46.5 and 6 61 ppt respectively while the sea level ranged from -0.25 to +1.2 m. Tidal variations were not seen in the lagoon due to its long narrow canal system. Salt budget showed that the deposition of salt on the lagoon bottom during periods of decreasing water level. During increasing water level, salt is dissolved again. Flow of water through the Dutch Canal between the Puttalam Lagoon and Mundel Lake is driven by the changes in sea level. These changes are mainly due to seasonal changes of net freshwater supply and, to a lesser degree, to seasonal changes in sea surface height. As the flow rates are small due to the long and narrow canal, the residence time ranges between two months and several months in the Mundel Lake, except during season of high freshwater supply. As the water exchange is weak, the Mundel Lake becomes hyper saline with strong fluctuations in salinity. This implies a stress to all lagoon dwelling aquatic organisms and also to aquaculture practices in the area.

Dog chromosome-specific paints reveal evolutionary inter- and intrachromosomal rearrangements in the American mink and human

Forty chromosome-specific paint probes of the domestic dog (Canis familiaris, 2n = 78) were used to delineate conserved segments on metaphase chromosomes of the American mink (Mustela vison, 2n = 30) by fluorescence in situ hybridisation. Half of the 38 canine autosomal probes each painted one pair of homologous segments in a diploid mink metaphase, whereas the other 19 dog probes each painted from two to five pairs of discrete segments. In total, 38 canine autosomal paints highlighted 71 pairs of conserved segments in the mink. These painting results allow us to establish a complete comparative chromosome map between the American mink and domestic dog. This map demonstrates that extensive chromosome rearrangements differentiate the karyotypes of the dog and American mink. The 38 dog autosomes could be reconstructed from the 14 autosomes of the American mink through at least 47 fissions, 25 chromosome fusions, and six inversions. Furthermore, comparison of the current dog/mink map with the published human/dog map discloses 23 cryptic intrachromosomal rearrangements in 10 regions of conserved synteny in the human and American mink genomes and thus further refined the human/mink comparative genome map. Copyright (C) 2000 S. Karger AG, Basel.

Karyotypic evolution and phylogenetic relationships in the order Chiroptera as revealed by G-banding comparison and chromosome painting

Bats are a unique but enigmatic group of mammals and have a world-wide distribution. The phylogenetic relationships of extant bats are far from being resolved. Here, we investigated the karyotypic relationships of representative species from four families

Contrast features of CpG islands in the promoter and other regions in the dog genome

The recent release of the domestic dog genome provides us with an ideal opportunity to investigate dog-specific genomic features. In this study, we performed a systematic analysis of CpG islands (CGIs), which are often considered gene markers, in the dog

Vibration and stress analysis in the presence of structural uncertainty

At medium to high frequencies the dynamic response of a built-up engineering system, such as an automobile, can be sensitive to small random manufacturing imperfections. Ideally the statistics of the system response in the presence of these uncertainties should be computed at the design stage, but in practice this is an extremely difficult task. In this paper a brief review of the methods available for the analysis of systems with uncertainty is presented, and attention is then focused on two particular "non- parametric" methods: statistical energy analysis (SEA), and the hybrid method. The main governing equations are presented, and a number of example applications are considered, ranging from academic benchmark studies to industrial design studies. © 2009 IOP Publishing Ltd.

Population dynamics of two jewfishes Jhonius argentatus and Johnieops vogleri) in the coastal waters of Bay of Bengal, Bangladesh

Population parameters of Jhonius argentatus and Johnieops vogleri in coastal waters of Bay of Bengal, Bangladesh were estimated by using FiSAT programme. The von Bertalanffy growth parameters, extreme length (cm) and growth constant K (year ·1) were found to be 46.50 and 0.59 for J. argentatus, and 33.50 and 0.85 for J.vogleri The Loc(cm) and Z/K estimates provided by Wetherall plot were 46.694 and 1.791 for J. argentatus, and 31.25 and 2.623 for J. vogleri. The annual rate of natural (M) and fishing mortality (F) were estimated as 1.12 and 0.78 for J. argentatus, and 1.56 and 1.28 for J. vogleri. Rate of exploitation (E) was estimated as 0.41 for J. argentatus and 0.45 for J. vogleri. About 80.04% of J. argentatus were found to be recruited during peak pulses (April-May) and 19.96% during lean pulses (October-November) and 85.75% J. vogleri during peak pulses (May-July) and 14.25% during lean pulses (September-October). The growth performance index(') was 3.11 for J. argentatus and 1.93 for J. vogleri. The total length and body weight relationship was found to be W = 0.0403 TL25723 for J. argentatus and W = 0.0907 TV3482 for J. vogleri.

Hydrographical conditions and benthic assemblages in the Suez Gulf, Egypt

The coastal development and human activities along the Suez Gulf leading to sedimentation, degrade the quality of water, disturbing the natural structure and functions of aquatic communities. The Suez Gulf is a large semi-closed area with a 346 km long coastline on the western beach side. The prevailing physicochemical parameters in shallow intertidal waters were measured seasonally over the year. Benthic faunas in the sampling sites were studied indicating their regional distribution in relation to the impact of different environmental parameters in the intertidal region. The concentration of copper in seawater reached high level at St. IV (4.57 ug/1), which is exposed to sewage and petroleum hydrocarbons. The grain size of the sediment is a determining factor for the organic carbon concentration and the sandy substrate enhances organic matter degradation processes. A large number of oil fields are present along the western coast of the Suez Gulf, therefore, cadmium and organic matter appeared to be high. The values of pH did not vary greatly among the different sampling sites. It was high at EI-Ein, El-Sukhna and Ras-Shukeir due to the disposal of mainly acidic sewage and industrial effluents of the two stations Adabiya and Ras-Gharib respectively. The macrobenthos included 71 species embraced mainly from Mollusca (53.5% Gastropoda and 12.7% Bivalvia) and the other invertebrates included 7 groups namely, Rhizostoma, Polychaeta, Cirripedia, Amphipoda, Isopoda, Decapoda and Echinodermata. The distribution of benthos is affected by the temperature and salinity of seawater. The concentration of organic matter in seawater and in sediments in shallow waters shows high values in the central part of the Gulf of Suez.

Influence of formulated diets with varying protein levels on growth and ammonia excretion in the fry of Indian major carp, Cirrhina mrigala

The influence of formulated isocaloric diets of different protein levels (30, 35, 40, 45 and 50%) on the growth and ammonia excretion of the Indian major carp Cirrhina mrigala fry was studied for a rearing period of four weeks in the laboratory. Fishmeal, groundnut oilcake and silkworm pupae formed the source of protein in all the diets. As the dietary protein level increased from 30 to 40%, the growth and conversion efficiency increased significantly. Further increase in the protein level resulted in decrease in growth and conversion efficiency. Growth rate, weight gain (%), and gross and net feed conversion efficiencies were maximum at 40% dietary protein level. Ammonia excretion was directly proportional to the level of protein in the diet.

Dynamics of parasite population and its histopathological and histophysiological effects in the stomach of a freshwater fish

The caryophyllaeid cestode Lytocestoides fossilis infects the freshwater catfish Heteropneustes fossilis. The study was conducted for two consecutive years (2004-06) to record the bio-statistical data of the parasite. The incidence, intensity, density and index of infection of the parasite have been recorded. The infection was more during June to September, moderate during February to May and low during October to January. The parasite brought about severe histopathological changes in the stomach of infected fish. The changes observed in the stomach of fish included structural damage of the villi, inflammation, and fibrosis associated with hyperplasia and metaplasia. The hypertrophy of mucous layer led to vacuolation and necrosis. Histochemical changes were noticed with enhanced carbohydrate, protein and lipid contents. The enhanced substrate content in the infected organ might be due to the disfunctioning of the digestive tract, which results in the accumulation of various metabolites. Mucus secretion was triggered as a protective interaction against parasitic invasion. The parasitic infection affects the general metabolic state of the host and as the result, the fish becomes sluggish and moribund.

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO2 emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production. Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO 2 emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions. Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement. © 2011 Elsevier B.V. All rights reserved.