Technical Aspects of Internet-Shopping, Comparative study in Finland/Russia

Isot ja keskikokoiset yritykset harkitsevat sähköistä kaupankäyntiä Internetissä, Internet - kauppojen muodossa. Organisaatiot pyrkivät kilpailukykyiseen ja moderniin tyyliin kaupankäynnissä sekä yrityksen eri prosessien automatisointiin. Yrityksen on onnistuttava uusimpien tekniikoiden ja työkalujen omaksumisessa kilpailukykynsä parantamiseksi. Sähköinen kaupankäynti on suhteellisen uusi tekniikka, joka mahdollistaa kaupankäynnin esittämisen uudessa, sähköisessä muodossa. Tämä työ sisältää katsauksen yrityksen mahdollisiin sähköisen kaupankäynnin eri muotoihin. Työ sisältää mahdollisia ratkaisuja Internet-kaupan rakentamiseen, sähköisen kaupankäynnin hallintaan sekä erityyppisten Internet- kauppojen kuvauksia. Sähköisen kaupankäynnin ongelmat ovat myös tarkastelussa. Välttämättömät asiat sähköisen kaupankäynnin perustamiseksi on lueteltu. Työn kokeellinen osuus sisältää vertailututkimusta sähköisen kaupankäynnin muodoista Suomessa ja Venäjällä. Sähköisen kaupankäynnin ongelmat, niiden mahdolliset ratkaisut, eroavaisuudet sekä samankaltaisuudet molempien maiden välillä on esitetty tässä työssä. Työssä on arvioitu Internet-kaupan kehittämistä sekä edistämistä esimerkein. Tutkimuksen tulokset on esitetty.

Suojakaasuseoksen koostumuksen vaikutus CO2-laser-MAG-hybridihitsauksessa

Hitsaavassa teollisuudessa kilpailukyvyn säilyttäminen edellyttää hitsauksen tehokkuuden nostoa. Niinpä metalliteollisuus etsii kuumeisesti uusia yhä tehokkaampia hitsausmenetelmiä. CO2-laserin ja MAG:in yhdistelmän muodostamalla hybridihitsauksella saadaan aikaan syvä tunkeuma kuten laserhitsauksessa, mutta sallitaan laserhitsausta väljemmät railotoleranssit. Samalla muodonmuutokset vähenevät huomattavasti verrattuna perinteiseen kaarihitsaukseen. Kaariavusteisessa laserhitsauksessa yhdistetään laserhitsaukseen perinteinen kaarihitsaus eli MIG/MAG-, TIG- tai plasmahitsaus. Menetelmää voidaan kutsua myös hybridihitsaukseksi ja sillä hyödynnetään molempien prosessien edut välttyen yksittäisten prosessien haitoilta. Prosessin haittapuolena on parametrien suuri määrä, joka on rajoittanut menetelmän käyttöönottoa. Diplomityössä tutkittiin suojakaasuseoksen koostumuksen vaikutusta rakenneteräksen CO2-laser-MAG-hybridihitsauksessa. Laserhitsauksen ja MAG-hitsauksen suojakaasuvirtaukset yhdistettiin siten, että heliumseosteinen suojakaasu tuotiin MAG-polttimen kaasukuvun kautta. Suojakaasun heliumpitoisuus nostettiin niin korkeaksi, että estettiin laserhitsauksen muodostaman plasman syntyminen. Samalla hitsauskokeissa opittiin paremmin ymmärtämään prosessia ja sen parametrien riippuvuutta toisiinsa. Tutkitut suojakaasuseokset koostuivat heliumista, argonista ja hiilidioksidista. Hitsauskokeiden perusteella havaittiin, että suojakaasuseoksen optimaalinen heliumpitoisuus on 40-50 %. Tällöin laserin tunkeumaa häiritsevää plasmapilveä ei synny ja prosessi on stabiili. Päittäisliitosten hitsauksessa suojakaasuseoksen 2 %:n CO2-pitoisuudella saadaan aikaan hyvin vähän huokosia sisältävä hitsi, jonka tunkeumaprofiilin muoto ja liittymä perusaineeseen on juoheva. Pienaliitoksilla 7 %:n CO2-pitoisuudella prosessi pysyy stabiilina ja vähäroiskeisena. Tunkeuma hieman levenee hitsin keskeltä ja hitsin liittyminen perusaineeseen on juoheva.CO2-laser-MAG-hybridihitsauksella aikaansaadaan laadukkaita hitsejä taloudellisesti, mikäli käytetyt parametrit ovat oikein valittuja. Parametrit on sovitettava jokaiseen hitsaustapaukseen erikseen, eikä niitä välttämättä voida suoraan käyttää toisessa tapauksessa.

Deep radio images of the HEGRA and Whipple TeV sources in the Cygnus OB2 region.

The modern generation of Cherenkov telescopes has revealed a new population of gamma-ray sources in the Galaxy. Some of them have been identified with previously known X-ray binary systems while other remain without clear counterparts a lower energies. Our initial goal here was reporting on extensive radio observations of the first extended and yet unidentified source, namely TeV J2032+4130. This object was originally detected by the HEGRA telescope in the direction of the Cygnus OB2 region and its nature has been a matter of debate during the latest years. The situation has become more complex with the Whipple and MILAGRO telescopes new TeV detections in the same field which could be consistent with the historic HEGRA source, although a different origin cannot be ruled out. Aims.We aim to pursue our radio exploration of the TeV J2032+4130 position that we initiated in a previous paper but taking now into account the latest results from new Whipple and MILAGRO TeV telescopes. The data presented here are an extended follow up of our previous work. Methods.Our investigation is mostly based on interferometric radio observations with the Giant Metre Wave Radio Telescope (GMRT) close to Pune (India) and the Very Large Array (VLA) in New Mexico (USA). We also conducted near infrared observations with the 3.5 m telescope and the OMEGA2000 camera at the Centro Astronómico Hispano Alemán (CAHA) in Almería (Spain). Results.We present deep radio maps centered on the TeV J2032+4130 position at different wavelengths. In particular, our 49 and 20 cm maps cover a field of view larger than half a degree that fully includes the Whipple position and the peak of MILAGRO emission. Our most important result here is a catalogue of 153 radio sources detected at 49 cm within the GMRT antennae primary beam with a full width half maximum (FWHM) of 43 arc-minute. Among them, peculiar sources inside the Whipple error ellipse are discussed in detail, including a likely double-double radio galaxy and a one-sided jet source of possible blazar nature. This last object adds another alternative counterpart possibility to be considered for both the HEGRA, Whipple and MILAGRO emission. Moreover, our multi-configuration VLA images reveal the non-thermal extended emission previously reported by us with improved angular resolution. Its non-thermal spectral index is also confirmed thanks to matching beam observations at the 20 and 6 cm wavelengths.

Poétique des objets chez Sophocle : fonctions dramatiques et valeurs symboliques

La thèse propose une analyse du rôle des objets dans quatre tragédies (Ajax, Trachiniennes, Electre, Philoctèté) et un drame satyrique (Limiers) de Sophocle. Le propos est d'étayer le constat selon lequel les objets ont un rôle prépondérant dans l'économie générale de chacune de ces intrigues et de dégager ce rôle chez cet auteur. L'introduction met en évidence l'émergence du material turn en sciences humaines jusque dans les sciences de l'Antiquité en passant par la littérature et l'anthropologie, souligne le caractère souple et opératoire de la catégorie de l'objet, le lien avec la question du signe et du langage non verbal et relève l'absence d'équivalent en grec ancien pour cette catégorie, avec le problème épistémologique que cela implique pour la présente recherche. L'objet n'est pas abordé ici comme accessoire, mais comme entité participant d'une fiction théâtrale. On distingue les moments où les objets sont susceptibles d'apparaître sur scène des moments où ils apparaissent dans des récits ou des évocations. Dans le monde fictionnel constitué par chaque intrigue, sont envisagés les modes d'apparition textuels et poétiques d'objets intra-fictionnels, dans le cadre du genre théâtral, qui combine discours et actions, avec les décalages et les phénomène de dissimulation et d'ostentation que cela implique. Les métaphores et les images jouent ici un rôle prépondérant. Des analyses circonstanciées en 5 chapitres thématisant les objets et leurs fonctions. Dans I'Ajax, les valeurs liées aux armes, en particulier l'épée d'Hector et le bouclier d'Eurysacès, telles qu'elles apparaissent dans l'épopée, sont transposées dans une logique tragique où le prestige lié à ces armes devient polémique et problématique. Le vêtement sacrificiel des Trachiniennes, auquel répond la figure d'Iole, un personnage largement réifiés, thématise le déséquilibre qui caractérise les relations entre Héraclès et Déjanire, dans le cadre des institutions du mariage et du sacrifice, où s'immisce une dimension sauvage et sournoise. Dans l'Electre, au contexte funéraire et d'appel à la vengeance, auquel renvoie une multitude d'objets (sceptre, hache, lit et autres pièces de mobilier, offrandes, etc.) se superpose une dimension méta-fictionnelle et méta-théâtrale investie par l'urne vide. L'arc du Philoctèté constitue l'enjeu dramatique principal de la tragédie et cristallise un débat polémique de valeurs humaines instables auquel s'oppose une logique divine et collective attachée au passé de l'objet, qui se trouve réorienté vers un avenir glorieux. Un passage par le seul drame satyrique conservé de Sophocle permet de constater que l'objet, une tortue-lyre, possède des caractéristiques similaires transposées dans le contexte satyrique, où l'hybridité, les marqueurs de la civilisation, les attributions des Satyres, mais aussi des traits comiques, jouent un rôle prépondérant. La conclusion tente une synthèse et identifie plusieurs observations transversales : jeux sur la présence et l'absence, décalages entre discours et actions, entre langage verbal et non verbal, modalités d'allusion à des personnages, temporalités et espaces absents, détournement des fonctions d'usage, modalités du don, de l'échange et de la privation, procédures de personnification et de réification, rôle prépondérant dans les modalités de l'accomplissement du destin. A la faveur de l'identification de ces caractéristiques transversales, on tente d'ouvrir le propos sur la question du cadavre, dont le statut semble intermédiaire entre personnage et objet, notamment aussi dans \'Antigone, et la figure d'Oedipe, qui apparaît comme un héros- objet dans les deux tragédies que lui consacre Sophocle, l'Oedipe-roi, et \'Oedipe à Colone.

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Tunkeuman hallinta MIG/MAG-hitsauksessa

MIG/MAG-hitsaukselle tyypillinen ominaispiirre, valokaaren itsesäätyvyys, saavutetaan vakiojännitelähdettä käyttämällä. Valokaaren sisäisen säätömekanismin ansiosta kaarenpituus pysyy vakiona, vaikka hitsauspolttimen ja työkappaleen välinen etäisyys vaihtelisi hitsauksen aikana. Vakiojännitelähteen käyttäminen aiheuttaa kuitenkin kaaritehon vaihtelua vapaalankapituuden muuttuessa. Vapaalangan kasvaessa liian pitkäksi kaariteho laskee niin alas, ettei se enää riitä sulattamaan tarpeeksi perusainetta railon kyljissä. Tämän seurauksena hitsausliitokseen syntyy erilaisia liittymävirheitä. Käsinhitsauksessa vapaalangan pituus saattaa polttimen epävakaasta kuljetuksesta johtuen vaihdella erityisesti kokemattomilla hitsaajilla. Mekanisoidussa ja automatisoidussa hitsauksessa railojen mitta- ja muotopoikkeamat aiheuttavat vapaalankapituuden vaihtelua. Poikkeamia syntyy kaikissa hitsausrailojen esivalmistusvaiheissa. Lisäksi lämmöntuonnin aiheuttamat muodonmuutokset kappaleissa lisäävät poikkeamia railonsovituksessa hitsauksen aikana. Ongelma on useimmiten ratkaistavissa railonseurantaa käyttämällä. Railonseurantajärjestelmät ovat kuitenkin kalliita, eivätkä ne toimi luotettavasti kaikissa olosuhteissa. Diplomityössä tutkittiin uutta MIG/MAG-hitsauksen reaaliaikaiseen tunkeuman hallintaan kehitettyä säätöjärjestelmää. Työn tavoitteina olivat säätöjärjestelmän luotettavan toiminnan takaavien reunaehtojen ja kosketussuutinetäisyyden suositusrajojen määrittäminen. Tavoitteiden täyttämiseksi työn kokeellisessa osiossa suoritettiin laaja hitsauskokeiden sarja, jossa hitsattavina materiaaleina käytettiin seostamatonta ja runsasseosteista terästä.

Contribución al conocimiento de la geología del depósito de Au-Cu de La Pava (Península de Azuero, Panamá)

The «La Pava» Au-Cu deposit is hosted by a vulcanosedimentary sequence, named Ocú Formation,developed in an island arc environment that resulted from the subduction of the Nazca Plate beneath the Caribbean Plate during the Cretaceous times. The deposit consists of disseminations and stockworks of pyrite and chalcopyrite accompanied by barite, quartz and carbonates. Three hydrothermal alteration zones have been recognized: silicic, argillic and propilityc, typical of gold-related high sulfidation systems. A supergenic alteration overprints the hydrothermal alterations developing a cap rich in silica and Feoxides. The detailed study of the Ocú Fm. indicates that the sulfides and the accompanying gold was formed in a submarine environment. Therefore we suggest that «La Pava» represents an Au-Cu hybrid deposit between high sulphidation epithermal and VMS types, which are found in volcanogenic massive sulphide environments.

Apnea-like suppression of respiratory motion: First evaluation in radiotherapy.

BACKGROUND AND PURPOSE: Compensation for respiratory motion is needed while administering radiotherapy (RT) to tumors that are moving with respiration to reduce the amount of irradiated normal tissues and potentially decrease radiation-induced collateral damages. The purpose of this study was to test a new ventilation system designed to induce apnea-like suppression of respiratory motion and allow long enough breath hold durations to deliver complex RT. MATERIAL AND METHODS: The High Frequency Percussive Ventilation system was initially tested in a series of 10 volunteers and found to be well tolerated, allowing a median breath hold duration of 11.6min (range 3.9-16.5min). An evaluation of this system was subsequently performed in 4 patients eligible for adjuvant breast 3D conformal RT, for lung stereotactic body RT (SBRT), lung volumetric modulated arc therapy (VMAT), and VMAT for palliative pleural metastases. RESULTS: When compared to free breathing (FB) and maximal inspiration (MI) gating, this Percussion Assisted RT (PART) offered favorable dose distribution profiles in 3 out of the 4 patients tested. PART was applied in these 3 patients with good tolerance, without breaks during the "beam on time period" throughout the overall courses of RT. The mean duration of the apnea-like breath hold that was necessary for delivering all the RT fractions was 7.61min (SD=2.3). CONCLUSIONS: This first clinical implementation of PART was found to be feasible, tolerable and offers new opportunities in the field of RT for suppressing respiratory motion.

Alteração do comportamento eletroquímico do eletrodo de níquel, em ácido sulfúrico diluído, sob diferentes condições de iluminação

In this paper is presented electrochemical evidences of the influence of the light on the electrochemical behavior of nickel electrode in diluted sulfuric acid. The current densities related with the electrooxidation of the metal decreases when the electrode is under illumination. The corrosion potential, Ecorr , shift to a more positive value in this condition. This effect was observed with polychromatic light and with different wavelength glass filters such as 700 nm and 520 nm. It was observed that increasing the temperature of the solution, the current densities related with cathodic and anodic processes, increases instead of decreases. The activation energy related with the electrooxidation of the electrode was higher under illumination than in the dark. It is suggested that this behavior may be related or with a photo-inhibition effect either with dessorption of adsorbed water involved in the electrooxidation mechanism.

Imaging polarimetry of the fogbow: polarization characteristics of white rainbows measured in the high Arctic

The knowledge on the optics of fogbows is scarce, and their polarization characteristics have never been measured to our knowledge. To fill this gap we measured the polarization features of 16 fogbows during the Beringia 2005 Arctic polar research expedition by imaging polarimetry in the red, green and blue spectral ranges. We present here the first polarization patterns of the fogbow. In the patterns of the degree of linear polarization p, fogbows and their supernumerary bows are best visible in the red spectral range due to the least dilution of fogbow light by light scattered in air. In the patterns of the angle of polarization α fogbows are practically not discernible because their α-pattern is the same as that of the sky: the direction of polarization is perpendicular to the plane of scattering and is parallel to the arc of the bow, independently of the wavelength. Fogbows and their supernumeraries were best seen in the patterns of the polarized radiance. In these patterns the angular distance δ between the peaks of the primary and the first supernumerary and the angular width σ of the primary bow were determined along different radii from the center of the bow. δ ranged between 6.08° and 13.41° , while σ changed from 5.25° to 19.47° . Certain fogbows were relatively homogeneous, meaning small variations of δ and σ along their bows. Other fogbows were heterogeneous, possessing quite variable δ- and σ-values along their bows. This variability could be a consequence of the characteristics of the high Arctic with open waters within the ice shield resulting in the spatiotemporal change of the droplet size within the fog

Paràmetres relacionats amb la seqüència iterada de digrafs excèntrics

La memòria que es presenta s'emmarca dins de l'àrea de la teoria de grafs. En concret el projecte es basa en la implementació i estudi de la seqüència iterada de l'operador digraf excèntric, així com els diferents paràmetres relacionats amb aquesta seqüència: Donat un digraf G, el seu digraf excèntric ED(G) és aquell que te'ls mateixos vèrtexs que G i on hi ha un arc d'un vèrtex u a un vèrtex v si, i només si, v és un vèrtex excèntric de u (és a dir, v és el vèrtex més allunyat de u a G). La seqüència de digrafs G;ED(G);ED2(G); ··· ;EDk(G); ··· on EDk(G) = ED(EDk-1(G)) resulta ser finita i es defineixen la cua t i el període p de la seqüència com els enters positius més petits pels quals EDt(G) = EDt+p(G). Anàlogament es defineixen la isocua t' i el isoperíode p' com els enters positius més petits tals que EDt'(G) ' EDt'+p'(G), on ' denota l'isomorfisme de digrafs. Hi ha diversos problemes oberts envers aquesta temàtica. Es marca com objectius: implementar en Python les eines necessàries per obtenir la seqüència iterada de digrafs excèntrics, calcular la seqüència iterada de tots els digrafs d'ordres petits i calcular els paràmetres associats a aquesta seqüència i donar resultats per a l'estudi d'algunes qüestions obertes.

Obtenção de um material adsorvente para íons de metais pesados, através da eletropolimerização de 2-mercaptobenzimidazol à superfície de carbono vítreo reticulado

Electrochemical methods applied to organic species transformation has been used as excellent synthesis tools. C-C bonds can be established, making possible polymer synthesis by both anodic and cathodic reactions of suitable monomer species at the working electrode surface. In this study, anodic procedure was used to electropolymerization of 2-mercaptobenzimidazole at reticulated glassy carbon (RGC) surface. 2-mercaptobenzimidazole presents ligand sites towards Hg2+, Ag+ and Cu2+ ions. The obtained material has been able to adsorb the above mentioned ions in aqueous solution.

Considerações sobre a eletrogeração de peróxido de hidrogênio

This paper presents some results that may be used as previous considerations to a hydrogen peroxide electrogeneration process design. A kinetic study of oxygen dissolution in aqueous solution is carried out and rate constants for oxygen dissolution are calculated. Voltammetric experiments on vitreous carbon cathode shown that the low saturation concentration drives the oxygen reduction process to a mass transfer controlled process which exhibits low values of limiting currents. Results have shown that the hydrogen peroxide formation and its decomposition to water are separated by 400 mV on the vitreous carbon surface. Diffusion coefficients for oxygen and hydrogen peroxide are calculated using data taken from Levich and Tafel plots. In a series of bulk electrolysis experiments hydrogen peroxide was electrogenerated at several potential values, and concentration profiles as a function of the electrical charged passed were obtained. Data shown that, since limiting current plateaus are poorly defined onto reticulated vitreous carbon, cathodic efficiency may be a good criterion for choosing the potential value in which hydrogen peroxide electrogeneration should be carried out.