Characterization of iron(III)porphyrin-hydroxo complexes in organic media through UV-Vis and EPR spectroscopies

The interaction of OH- with Fe(TPP)(+), Fe(TDCPP)(+), Fe(TMP)(+) and Fe(TFPP)(+) in 1,2-dichloroethane was studied by titrating FeP solutions with aliquots of a solution of tetrabutylammonium hydroxide in acetonitrile. The number of OH- ions (n) coordinated to the FeP and the stability constants (beta(n)) for the FeP-OH- complexes were calculated from UV-Vis absorbance data and iron spin states were determined through EPR spectroscopy, Fe(TMP) (+) forms a high-spin mono-hydroxo complex, while Fe(TPP)I and Fe(TDCPP)(+) form high-spin bis-hydroxo complexes. To our knowledge, this is the first time that the formation of bis-hydroxo complexes from Fe(TPP) (+) has been reported, and this was possible because the studies were carried out in basic organic media, In this same medium, Fe-III-Fe-II reduction upon OH- addition to Fe(TFPP) (+) was observed, without concomitant formation of the mu-oxo dimeric species [Fe(TFPP)](2)O. (C) 1999 Elsevier B.V., All rights reserved.

Influence of preparation methods and thermal treatment in melt-solidified and cast films of poly(vinylidene fluoride-trifluorethylene) copolymers

This paper is aimed at addressing the differences observed in film properties when poly(vinylidene fluoride-trifluorethylene) P(VDF-TrFE) films are fabricated using distinct methods. Samples were obtained either from casting a solution or by compression molding from a molten phase and characterized by differential scanning calorimetry (DSC). It is shown that the main differences between melt-solidified and cast films arise from the thermal treatment inherent in the former samples.

MEASURING HYSTERESIS LOOPS OF FERROELECTRIC POLYMERS USING THE CONSTANT CHARGING CURRENT CORONA TRIODE

A novel method is proposed for measuring the hysteresis loops of ferroelectric polymers. The samples need to have only one electrode and are poled by corona discharge in a constant current corona triode. It is shown how the sample surface potential and the charging current are related to the remanent polarization and coercive field, so that the hysteresis loops can be obtained. An illustrative example is given for samples of beta-PVDF for which the hysteresis cycles were remarkably close to those obtained with the traditional Sawyer-Tower circuit. Values of 80 MV/m and 70 mC/m2 were estimated for the coercive field and remanent polarization, respectively.

Increasing the dielectric breakdown strength of poly(ethylene terephthalate) films using a coated polyaniline layer

The dielectric strength of films made from poly(ethylene terephthalate) (PET) coated with a thin layer of polyaniline (PANI) was studied. The PANI layer was deposited on the PET films by the 'in situ' chemical polymerization method. The PANI layer of the PANI/PET films was undoped in NH4OH 0.1 M solution and re-doped with aqueous HCl solution under different pH values varying from 1 to 10. Electric breakdown measurements were performed by applying a voltage ramp and the results showed a dependence of the dielectric strength on the pH of the doping solution due to the changes in the electrical conductivity of the PANI layer. The dielectric strength of PET/PANI films treated under higher pH conditions showed an electric strength about 30% larger than the PET films, since it leads to a non-conductive PANI layer.

Surgical Management of Impacted Teeth Using Three-Dimensional Computed Tomography

The surgical removal of impacted, supernumerary, or ectopic teeth is a routine procedure to the dental surgeon. Because any and all surgical interventions involve anatomic considerations that predispose the patient to a high risk of incidents or complications, it is absolutely necessary to precisely determine the location of the enclosed teeth, to better plan the procedure. Even though the conventional radiographic techniques are commonly used to detect the presence of such teeth, they can present deficiencies. In those situations, additional examinations can be requested. In this article, we are reporting the case of a 12-year-old patient, whose third superior molars appeared in a very atypical position. We chose to request a computed tomography and three-dimensional manipulation of the obtained images. This article, as its main goal, highlighted the importance of computed tomography and of three-dimensional reconstructions as a tool to precisely determine the location of enclosed teeth, thus allowing for a better planning of the surgery and a safer surgical intervention.

On the equivalence of the mechanisms governing switching and hysteresis phenomena

The nucleation and growth model, which is usually applied to switching phenomena, is adapted for explaining surface potential measurements on the P(VDF-TrFE) (polyvinylidene fluoride-trifluoroethylene) copolymer obtained in a constant current corona triode. It is shown that the growth is one-dimensional and that the nucleation rate is unimportant, probably because surface potential measurements take much longer than the switching ones. The surface potential data can therefore be accounted for by a growth model in which the velocity of growth varies exponentially with the electric field. Since hysteresis loops can be obtained from surface potential measurements, it is suggested that similar mechanisms can be used when treating switching and hysteresis phenomena, provided that account is taken of the difference in the time scale of the measurements.

Thermal treatment effects on phase transitions in P(VDF-TrFE)

Differential scanning calorimetry (DSC) studies were performed for 60/40 P(VDF-TrFE). The results not only confirm the importance of thermal history but also show that the samples with various configurations in terms of ferroelectric phases can be obtained via thermal treatment.

Effects of thermal treatment on phase transitions and on the mechanical relaxation in poly(vinylidene fluoride)

This work reports on the effects from thermal treatment in poly(vinylidene fluoride), PVDF, obtained with differential scanning calorimetry (DSC) and dynamic thermal analysis (DMA) measurements. It is shown that in successive DMA measurements performed with one sample the α relaxation peak almost disappears while the γ′ peak appears. The α relaxation peak, at ∼100°C in DMA measurements, is attributed to the preferential orientation of chains in the amorphous phase while the γ′ relaxation peak, at ∼50°C, is related to the thermal treatment to which the sample was submitted.

Molecular typing of IberoAmerican Cryptococcus neoformans isolates

A network was established to acquire basic knowledge of Cryptococcus neoformans in IberoAmerican countries. To this effect, 340 clinical, veterinary, and environmental isolates from Argentina, Brazil, Chile, Colombia, Mexico, Peru, Venezuela, Guatemala, and Spain were typed by using M13 polymerase chain reaction-fingerprinting and orotidine monophosphate pyrophosphorylase (URA5) gene restriction fragment length polymorphsm analysis with Hhal and Sau961 in a double digest. Both techniques grouped all isolates into eight previously established molecular types. The majority of the isolates, 68.2% (n=232), were VNI (var. grubii, serotype A), which accords with the fact that this variety causes most human cryptococcal infections worldwide. A smaller proportion, 5.6% (n=19), were VNII (var. grubii, serotype A); 4.1% (n=14), VNIII (AD hybrid), with 9 isolates having a polymorphism in the URA5 gene; 1.8% (n=6), VNIV (var. neoformans, serotype D); 3.5% (n=12), VGI; 6.2% (n=21), VGII; 9.1% (n=31), VGIII, and 1.5% (n=5) VGIV, with all four VG types containing var. gattii serotypes B and C isolates.

Thermogravimetric studies of the decomposition kinetics of four different Hevea rubber clones using Ozawa's approach

Thermal degradation of natural rubber extracted from four different rubber clones of the Hevea brasiliensis species was investigated by thermogravimetry using Ozawa's approach to assess the kinetic parameters of the decomposition process. The results are discussed in terms of the order of reaction, kinetic parameters such as activation energy as a function of conversion degree, and thermal stability for each of the clones.

Study of the thermo-mechanical and electrical properties of conducting composites containing natural rubber and carbon black

This work shows the preparation and characterization of composites obtained by mixing natural rubber (NR) and carbon black (CB) in different percentages aiming suitable mechanical properties, processability and electrical conductivity for future applications as transducers in pressure sensors. The composites NR/CB are characterized through dc conductivity, thermal analysis using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMA), thermogravimetry (TGA) and stress-strain test. The electrical conductivity changed from 10-9 to 10 Sm-1 depending on the percentage of CB in the composite. Besides, it was found a linear (and reversible) dependence of the conductivity on the applied pressure in the range from 0 to 1.6 MPa for the sample 80/20 (NR/CB wt%).

Stabilization of lumbo-pelvic region and electromyography of the abdominal muscles

It is usual to find athletes that can perform de curl up test easily, but are unable to maintain the stabilization of the low back during the double straight leg lowering (DSLL). In spite of having strong abdominal muscles, its stabilization role seems not to be effective. Thus, the purpose of this study was to verify the relation among individuals with strong abdominal muscles and the ability in perform posterior pelvic tilt (PPT); the ability to stabilize the low back during the DSLL and the eletromyographic activity of the abdominal muscles. Eighteen male subjects (aged 19.27 ± 3.5), without history of muscle skeletal dysfunction, performed both the PPT and DSLL tests. During these tests electromyographic signals of the rectus abdominis (RA), obliquus internus abdominis (01) and obliquus externus abdominis (OE) were recorded, the angle of the hip and the pressure under the low back were measured The results of analyses of variance (ANOVA) show that most volunteers accomplished the PPT test, actively flattening the low back with regular or good quality. However, none of them was able to stabilize the low back during the DSLL test. During the PPT test all abdominal muscle portions analysed were activated without significant differences. In an attempt of maintaining the lumbo-pelvic region stabilized during the DSLL, it was observed a tendency of higher bilateral activation of OE when compared to RA and 01 muscle portions between 70 and 20 degrees of hip flexion.

Cursos de geologia: expansão, interiorização e consolidação do ensino de geologia no brasil

A short time after the creation of the first Geology courses in Brazil (in 1957 with the pioneers in the University of São Paulo and in the Federal Universities of Ouro Preto, Pernambuco and Rio Grande do Sul, and then in the following year in the Federal Universities of Bahia and Rio de Janeiro), there arose other initiatives that spread almost twenty Geology courses throughout Brazil. In addition to expanding the Geology teaching in the South, Southeast and Northeast regions, these initiatives succeeded in allowing access to geological education for the population in the North and Central-west of Brazil. In the 1960s, the courses in the Federal University of Para in Belém (1964), University of Brasilia (1965) and São Paulo State University in Rio Claro (1969) were implanted. In the following decade, the courses in the Federal Rural University of Rio de Janeiro in Seropédica (1970), the Federal University of Ceará in Fortaleza (1970), the University of Rio dos Sinos in São Leopoldo (1973), the Federal University of Paraná in Curitiba (1973), the Federal University of Minas Gerais in Belo Horizonte (1973), the Federal University of Amazonas in Manaus (1976), the Federal University of Mato Grosso in Cuiabá (1976), the Federal University of Rio Grande do Norte in Natal (1976), and the State University of Rio de Janeiro in Rio de Janeiro (1977) were all created. At the close of the twentieth century, the course was implanted in the State University of Campinas (1998). Now, at the beginning of the twenty-first century, new Geology courses are being implanted, accentuating the movement inland of Geology teaching in Brazil. The Federal University of Pará began a new course in its campus in Marabá in the south-east of Pará and the Federal University of Bahia implanted a new course in its campus in Barreiras in the west of Bahia. Finally, the Federal Universities of Sergipe, Espírito Santo and Roraima commenced Geology courses in Aracaju, Alegre and Boa Vista, respectively. This chapter will present the synthesis of the Geology courses which, over the last decades of the twentieth century, contributed to the expansion of Geology teaching in the country, taking it to every region and giving opportunities to a large number of Brazilian citizens to realize their dreams and tread the paths of their professional vocation.

Produção científica na faculdade de filosofia, ciencias e letras de ribeirao preto-usp: Apliçãcao do índice de hirsch

In this work, an analysis of scientific bibliographic productivity was made using the Faculdade de Filosofia, Ciencias e Letras de Ribeirao Preto, Universidade de Sao Paulo (FFCLRP-USP) as example. It is a special Institution in the Brazilian University system which encompasses four important areas of knowledge (fields of concentration) in natural, biological, humanities, and social areas. It is composed by four departments which offer altogether eight undergraduate courses: 1) Psychology, 2) Pedagogy, 3) Chemistry, 4) Biology, 5) Medical Physics, 6) Biomedical Informatics, 7) Sciences of Information and Documentation and 8) Mathematics Applied to Business and six graduate programs leading to M.S. and Ph.D. degrees. Moreover, when analyzing the different courses of FFCLRP, they represent typical academic organization in Brazil and Latin America and could be taken as a model for analyzing other Brazilian research institutions. This analysis was made using: 1) the total number of papers (indexed in Curriculum Lattes database), 2) the number of papers indexed by Thomson ISI Web of Science database, and 3) the Hirsch (h-index). Bibliometric evaluations of undergraduate courses showed a better performance of the courses of Chemistry (P < 0.05), Biology (P < 0.05) and Medical Physics (P < 0.05) when compared to the Pedagogy, Sciences of Information and Documentation (P < 0.05) and Psychology (P < 0.05). We also analyzed the scientific output of the six graduate programs of FFCLRP-USP: 1) Chemistry, 2) Physics Applied to Medicine and Biology, 3) Entomology, 4) Compared Biology, 5) Psychology, 6) Psychobiology. The graduate programs in Psychobiology, Chemistry, Physics Applied to Medicine and Biology, Compared Biology, and Entomology presented very similar results, concerning the assessment of the three indexes. The graduate program in Psychology presented a lower h-index (P < 0.05) and had fewer papers indexed by the ISI (P < 0.05) when compared to the other graduate programs. The worse performance of the psychology program, pedagogy, sciences of information and documentation, psychology courses may be associated to the limited coverage of ISI database and some particular characteristics of this field of concentration.