Caracterização física, química e nutricional dos frutos da Aninga

Montrichardia linifera, conhecida popularmente como aninga, pertence à família Araceae e forma grandes populações às margens dos rios e igarapés da Amazônia, principalmente de águas brancas (barrentas). Seus frutos fazem parte da dieta alimentar de peixes, tartarugas e de grandes herbívoros, como peixe-boi e búfalo, havendo, portanto, a hipótese de seu aproveitamento na nutrição animal. Entretanto, apesar de sua vasta distribuição na paisagem amazônica, não existem dados na literatura sobre a composição nutricional desses frutos. Com os objetivos de avaliar o seu potencial nutricional e contribuir para o conhecimento dessa espécie, foi realizada, neste trabalho, a caracterização física, química e nutricional dos frutos. A infrutescência pesa em média 500 g, com um conjunto de aproximadamente 80 frutos. O seu valor nutritivo se resume, basicamente, ao seu valor energético (≅ 350 kcal), devido principalmente ao teor de carboidratos (≅ 80%), possuindo baixo valor proteico (< 0,5%). As concentrações de manganês (≅ 1.800 mg kg^-1) foram consideradas tóxicas, extrapolando o limite máximo tolerável em nutrição de bubalinos (1.000 mg kg^-1).

Profundidade de polimerização de cimentos resinosos utilizados na cimentação de pinos translúcidos e sua influência sobre a resistência adesiva antes e após ciclagem mecânica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tenacidade à fratura e dureza de porcelana feldspática adicionada de óxido de zircônio: efeito da concentração e da temperatura de sinterização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reconstrução imediata de diferentes defeitos peri-implantares em implantes pós-exodônticos: análise histomorfométrica em cães

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Associação fitoterápica no tratamento de feridas cutâneas induzidas em equinos

The efficiency of the topical use of a commercial product constituted by a herbal combination on the healing evolution of equine induced wounds was studied. A skin lesion in the shape of a square with 5cm sides was surgically produced on both sides of the buttocks of eight adult horses. One side was considered control and another one treated. Both control and treated sides were rinsed with water and neutral soap. Additionally, the wound on the treated side received the topical treatment with the herbal combination. Macroscopic and microscopic healing evolution of the wounds was evaluated and their areas were determined during the experimental period. There was statistical difference between wound areas. At the last evaluation, the average area of the control side was 0.70cm² and of the treated side was 1.23cm². The contraction of scar observed at 77 days was 97.57% for the control side and 95.59% for the treated side.

Chemical composition and metabolizable energy values of corn germ meal obtained by wet milling for layers

An experiment was carried out to determine the chemical composition, metabolizable energy values, and coefficients of nutrient digestibility of corn germ meal for layers. The chemical composition of corn germ meal was determined, and then a metabolism assay was performed to determine its apparent metabolizable energy (AME) and apparent metabolizable energy corrected for nitrogen (AMEn) values and its dry matter and gross energy apparent metabolizability coefficients (CAMDM and CAMGE, respectively). In the 8-day assay (four days of adaptation and four days of total excreta collection), 60 29-week-old white Lohman LSL layers were used. A completely randomized experimental design, with three treatments with five replicates of four birds each, was applied. Treatments consisted of a reference diet and two test diets, containing 20 or 30% corn germ meal. Results were submitted to analysis of variance and means were compared by the Tukey tests at 5% probability level. The chemical composition of corn germ meal was: 96.39% dry matter, 49.48% ether extract, 1.87% ashes, 7243 kcal gross energy/kg, 11.48% protein, 0.19% methionine, 0.21% cystine, 0.48% lysine, 0.40% threonine, 0.72% arginine, 0.35% isoleucine, 0.83% leucine, 0.57% valine, and 0.37% histidine, on as-fed basis. There were no statistical differences in AME, AMEn, CAMDM, and CAMGE values with the inclusion of 20 and 30% corn germ meal in the diets. On dry matter basis, AME, AMEn, CAMDM, and CAMGE values of corn germ meal were: 4,578 and 4,548 kcal/kg, 4,723 and 4,372 kcal/kg, 64.95 and 61.86%, respectively.

Comparison of maximal lactate steady state with V2, V4, individual anaerobic threshold and lactate minimum speed in horses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

30° inclination in handles of plastic boxes can reduce postural and muscular workload during handling

CONTEXTUALIZAÇÃO:O manuseio de materiais está ainda presente nos setores industriais e é associado a lesões na coluna lombar e membros superiores. A inserção de alças em caixas industriais é uma forma de reduzir os riscos relacionados à tarefa, porém a posição e a angulação das alças, que são fatores importantes para o conforto e segurança durante o manuseio, são ainda pouco investigadas objetivamente.OBJETIVOS:Comparar o manuseio de uma caixa comercial e de protótipos com alças e avaliar seus efeitos na postura de membros superiores, atividade elétrica muscular e percepção de agradabilidade em diferentes empunhaduras durante manuseio entre diferentes alturas.MÉTODO:Trinta e sete voluntários saudáveis avaliaram as alças dos protótipos que possibilitavam mudança nas posições (superior e inferior) e angulações (0°, 15° e 30º). Os movimentos dos punhos, cotovelos e ombros foram avaliados por meio da eletrogoniometria e inclinometria. A atividade elétrica muscular dos extensores do punho, bíceps braquial e porção superior do trapézio foi avaliada por um eletromiógrafo portátil. Os registros de movimento e atividade elétrica muscular foram sincronizados. Aspectos subjetivos de agradabilidade foram avaliados por meio de uma escala visual analógica.RESULTADOS E CONCLUSÕES:Os protótipos com alças inclinadas em 30° apresentaram as melhores avaliações de agradabilidade, posturas mais neutras de punho, menores níveis de atividade eletromiográfica do trapézio superior e menores ângulos de elevação dos braços. Os diferentes métodos de medida se mostraram complementares para a avaliação dos membros superiores durante as tarefas de manuseio.

Reproductive performance of Santa Ines ewes during dry and rainy seasons in eastern Amazon

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparing label free electrochemical impedimetric and capacitive biosensing architectures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of Physicochemical Surface Conditioning Methods for Adhesion of bis-GMA Resin Cement to Particulate Filler Composite and Surface Characterization

This study compared the effect of physicochemical surface conditioning methods on the adhesion of bis-GMA-based resin cement to particulate filler composite (PFC) used for indirect dental restorations. PFC blocks (N (block)=54, n (block)=9 per group) were polymerized and randomly subjected to one of the following surface conditioning methods: a) No conditioning (Control-C), b) Hydrofluoric acid (HF)etching for 60s (AE60), c) HF for 90s (AE90), d) HF for 120s (AE120), e) HF for 180s (AE180), and f) air-abrasion with 30 mu m silica-coated alumina particles (AB). The conditioned surfaces were silanized with an MPS silane, and an adhesive resin was applied. Resin composite blocks were bonded to PFC using resin cement and photo-polymerized. PFC-cement-resin composite blocks were cut under coolant water to obtain bar specimens (1mmx0.8mm). Microtensile bond strength test (mu TBS)was performed in a universal testing machine (1mm/min). After debonding, failure modes were classified using stereomicroscopy. Surface characterization was performed on a set of separate specimen surfaces using Scanning Electron Microscopy (SEM), X-Ray Dispersive Spectroscopy (XDS), X-Ray Photoelectron Spectroscopy (XPS), and Fourier Transform-Raman Spectroscopy (FT-RS). Mean mu TBS (MPa) of C (35.6 +/- 4.9) was significantly lower than those of other groups (40.2 +/- 5.6-47.4 +/- 6.1) (p<0.05). The highest mu TBS was obtained in Group AB (47.4 +/- 6.1). Prolonged duration of HF etching increased the results (AE180: 41.9 +/- 7), but was not significantly different than that of AB (p>0.05). Failure types were predominantly cohesive in PFC (34 out of 54) followed by cohesive failure in the cement (16 out of 54). Degree of conversion (DC) of the PFC was 63 +/- 10%. SEM analysis showed increased irregularities on PFC surfaces with the increased etching time. Chemical surface analyses with XPS and FT-RS indicated 11-70% silane on the PFC surfaces that contributed to improved bond strength compared to Group C that presented 5% silane, which seemed to be a threshold. Group AB displayed 83% SiO2 and 17% silane on the surfaces.

Numerical modeling of flow through an industrial burner orifice

This paper presents numerical modeling of a turbulent natural gas flow through a non-premixed industrial burner of a slab reheating furnace. The furnace is equipped with diffusion side swirl burners capable of utilizing natural gas or coke oven gas alternatively through the same nozzles. The study is focused on one of the burners of the preheating zone. Computational Fluid Dynamics simulation has been used to predict the burner orifice turbulent flow. Flow rate and pressure at burner upstream were validated by experimental measurements. The outcomes of the numerical modeling are analyzed for the different turbulence models in terms of pressure drop, velocity profiles, and orifice discharge coefficient. The standard, RNG, and Realizable k-epsilon models and Reynolds Stress Model (RSM) have been used. The main purpose of the numerical investigation is to determine the turbulence model that more consistently reproduces the experimental results of the flow through an industrial non-premixed burner orifice. The comparisons between simulations indicate that all the models tested satisfactorily and represent the experimental conditions. However, the Realizable k-epsilon model seems to be the most appropriate turbulence model, since it provides results that are quite similar to the RSM and RNG k-epsilon models, requiring only slightly more computational power than the standard k-epsilon model. (C) 2014 Elsevier Ltd. All rights reserved.

Polynomials to model the growth of young bulls in performance tests

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Population Parameters Based on Known Pedigree Records from Brazilian Jaffarabadi Buffaloes

The objective of this study was to evaluate the effective number of founders and ancestors, generation intervals and completeness of pedigree in Jaffarabadi breed buffaloes raised in Brazil. Pedigree records of 1,272 animals born from 1966 were used. The parameters were estimated using ENDOG, computational population genetic software. The obtained value for completeness of pedigree was 99.5, 50.9, and 20.5 for, the first, second and third generations, respectively. Generation interval estimates expressed in years and considering different pathways were 12.28 +/- 6.90 (sire-son), 11.55 +/- 6.07 (sire-daughter), 8.20 +/- 2.63 (dam-son) and 8.794 +/-.33 (dam-daughter). The overall average generation interval was 10.17 +/- 5.43 years. The number of founders, equivalent founders and ancestor animals that contributed for the genetic diversity in the reference population (1059) were 136, 130 and 134, respectively. Effective number of founder (f(e)=8) and ancestors (f(a)=7) were small, and the calculated expected inbreeding increase per generation was 4.99%. Four ancestors explained 50% of the genetic variability in the population and the major ancestor contributed with approximately 33% of the total population genetic variation. The genetic diversity within the current population is low as a consequence of a reduced number of ancestors.

Association among XRCC1, XRCC3, and BLHX gene polymorphisms and chromosome instability in lymphocytes from patients with endometriosis and ovarian cancer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)