Effect of drying on the reproducibility of DIAGNOdent to detect caries-like lesions

The aim of this study was to verify the drying effect on the reproducibility of DIAGNOdent (Dd) devices to detect caries-like lesions. Three areas were created in each of the 34 bovine incisors: sound (S), demineralized (DE) and remineralized (RE). One examiner measured each area with two Dd devices (denominated X and Y), twice under humid, and twice under dry condition. Intra-rater agreement according each device and inter-device agreement were estimated by kappa statistics (κ). Intra-rater agreement for device Y was substantial under humid (κ DE=0.68 and κ RE+S=0.68) and dry condition (κ DE=0.64 and κ RE+S=0.67). For device X, it was substantial under humid condition (κ DE=0.57 and κ RE+S=0.49), and it was almost perfect after air drying (κ DE=1.0 and κRE+S=1.0). Inter-device agreement was slight (κ =0.17) under humid condition, and it was substantial under dry condition (κ =0.62). As reproducibility increased under dry condition, drying is advised to detect caries-like lesions on free smooth surfaces when different devices are used.

Fisioterapia no tratamento da dor orofacial de pacientes com disfunção temporomandibular crônica

Recent studies have shown consistent results using the physical therapy in cases of pain and limitation of movement from temporomandibular dysfunction. Thus, our objective was to assess the effect of ten sessions of physical therapy and laser therapy in treatment of muscular pain and arthralgias in a woman with temporomandibular dysfunction. The painful symptoms relief achieved by session was over 20 %, up to zero at the end of treatment. Results demonstrated that the treatment protocol used was effective to reduce the temporomandibular joint and the masseter muscle tension and a decreased of drugs by patient. However, more studies are needed to define with more accuracy the effect of other physiotherapy programs and its interaction with other treatment modalities.

Stroke phases responses around maximal lactate steady state in front crawl

The objective of this study was to analyze changes in stroke rate (SR), stroke length (SL) and stroke phases (entry and catch, pull, push and recovery) when swimming at (MLSS) and above (102.5% MLSS) the maximal lactate steady state. Twelve endurance swimmers (21±8 year, 1.77±0.10m and 71.6±7.7kg) performed in different days the following tests: (1) 200- and 400-m all-out tests, to determine critical speed (CS), and; (2) 2-4 30-min sub-maximal constant-speed tests, to determine the MLSS and 102.5% MLSS. There was significant difference among MLSS (1.22±0.05ms-1), 102.5% MLSS (1.25±0.04ms-1) and CS (1.30±0.08ms-1). SR and SL were maintained between the 10th and 30th minute of the test swum at MLSS and have modified significantly at 102.5% MLSS (SR - 30.9±3.4 and 32.2±3.5cyclesmin-1 and SL - 2.47±0.2 and 2.38±0.2mcycle-1, respectively). All stroke phases were maintained at 10th and 30th minute at MLSS. However, the relative duration of propulsive phase B (pull) increased significantly at 102.5% MLSS (21.7±3.4% and 22.9±3.9%, respectively). Therefore, the metabolic condition may influence the stroke parameters (SR and SL) and stroke strategy to maintain the speed during swim tests lasting 30min. © 2010 Sports Medicine Australia.

Avaliação dos contatos oclusais em próteses provisórias unitárias implantossuportadas confeccionadas com e sem arco facial

To assess the number of occlusal contacts achieved in temporal prostheses mounted in a semi-adjusted articulator using the facial arch and the Camper plane. Ten patients treated in a private clinic were selected to be rehabilitated with prostheses in previously placed single implants. For each patient two temporal prostheses were designed obtained under different conditions: (1) model mounting using facial arch and (2) Camper plane mounting. Prostheses were made and adjusted in the laboratory and placed only by an operator. The occlusal contacts achieved in each condition were photographed being assessed and quantified by a second professional not involved with the mounting conditions. Results obtained were analyzed by Mann-Whitney test with a 5 % significance level. There was not a statistically difference between the number of occlusal contacts when prostheses were made with facial arch or Camper plane (p= 0.113). The temporal dental prosthesis confection for single implants, semi-adjusted articulator using the Camper plane, not differ very much from the facial arch use, according to the number of resulting occlusal contacts.

Análise dos parâmetros morfométricos da bacia do Rio Preto, Serra do Espinhaço (Minas Gerais, Brasil)

The Rio Preto Hydrographic Basin (RPHB) is located in the North-central portion of the state of Minas Gerais, Brazil, 30 km ENE of the city of Diamantina. The sources of the stream of that name are found in the Rio Preto State Park, which has an area of 10,755 hectares. The total area, perimeter, extension, and axial length of the RPHB, as well as other morphometric characteristics, with emphasis on shape indexes, were obtained with the help of the ArcGis 9.2 program. The cartographic data were taken from digitalized topographic charts in a scale of 1:100,000 of the Brazilian Geographical Institute (IBGE). The measured drainage area is of 389.3 km2 and the perimeter is 136.9 km. Due to structural influence, the shape of the RPHB is irrgular and elongated, with drainage developed in a dendritic and parallel pattern. Those characteristics were checked by means of the compaxity coefficient and the shape factor. The first one was estimated in 1.94, what implies that the basin is not subject to fast flooding in years with normal precipitation. The high degree of fluvial downcutting of the basin is confirmed by the fact that it is a 5th order basin, it presents a significant branching rate and a medium drainage density.

Externalidades en proyectos urbanos: saneamiento de aguas servidas y del ferrocarril metropolitano en Santiago de Chile

Incluye Bibliografía

Reprodutibilidade de medidas antropométricas estáticas de graduandos de odontologia e de mochos odontológicos

Objective: To evaluate the intraexaminer reproducibility of static anthropometric measurements of undergraduate dental students as well as the characteristics and regulating measurements of the dental stools used by them. Methods: Forty volunteers and 6 types of dental stools were evaluated. For the anthropometric measurements the employed equipments were: an adapted office chair, aflexible measuring tape with two adapted rods, a metallic device with a 90 degree central angle, string, a 35 x 24 cm rectangular wooden board, isolating tape and crepe tape. In order to standardize the position of the adapted office chair and the volunteers' feet, the floor was marked with the isolating and crepe tapes. A string was attached to the waist of each volunteer to mark the area corresponding to the kidney region making it possible to measure the seat-renal region area. The examined anthropometric measurements were height, trunkcephalic heigh, sacral-popliteal distance (OK?), hip width, popliteal height and the seat-renal region height. The evaluated characteristics of the dental stools relative to the seat were depth, horizontal width and minimum/maximum height. The back of the dental stool was evaluated as for the minimum/ maximum height adjustment. The anthropometric and dental stool measurements were obtained by a single examiner at two moments with a 1-week interval between the evaluations. Intra-class correlation coefficient (ρ) was used to estimate the intraexaminer reproducibility. Results: Excellent reproducibility was observed for all anthropometric measurements obtained (ρ=0.99) as well as for all dental stools evaluated (ρ=0.99). Conclusion: The method used to obtain the anthropometric and dental stools measurements was reproducible and can be used reliably.

Adaptive filter feature identification for structural health monitoring in aeronautical panel

This paper presents an approach for structural health monitoring (SHM) by using adaptive filters. The experimental signals from different structural conditions provided by piezoelectric actuators/sensors bonded in the test structure are modeled by a discrete-time recursive least square (RLS) filter. The biggest advantage to use a RLS filter is the clear possibility to perform an online SHM procedure since that the identification is also valid for non-stationary linear systems. An online damage-sensitive index feature is computed based on autoregressive (AR) portion of coefficients normalized by the square root of the sum of the square of them. The proposed method is then utilized in a laboratory test involving an aeronautical panel coupled with piezoelectric sensors/actuators (PZTs) in different positions. A hypothesis test employing the t-test is used to obtain the damage decision. The proposed algorithm was able to identify and localize the damages simulated in the structure. The results have shown the applicability and drawbacks the method and the paper concludes with suggestions to improve it. ©2010 Society for Experimental Mechanics Inc.

Birth defects in newborns and stillborns: An example of the Brazilian reality

Background: This study constitutes a clinical and genetic study of all newborn and stillborn infants with birth defects seen in a period of one year in a medical school hospital located in Brazil. The aims of this study were to estimate the incidence, causes and consequences of the defects. Methods. For all infants we carried out physical assessment, photographic records, analysis of medical records and collection of additional information with the family, besides the karyotypic analysis or molecular tests in indicated cases. Result: The incidence of birth defects was 2.8%. Among them, the etiology was identified in 73.6% (ci95%: 64.4-81.6%). Etiology involving the participation of genetic factors single or associated with environmental factors) was more frequent 94.5%, ci95%: 88.5-98.0%) than those caused exclusively by environmental factors (alcohol in and gestational diabetes mellitus). The conclusive or presumed diagnosis was possible in 85% of the cases. Among them, the isolated congenital heart disease (9.5%) and Down syndrome (9.5%) were the most common, followed by gastroschisis (8.4%), neural tube defects (7.4%) and clubfoot (5.3%). Maternal age, parental consanguinity, exposure to teratogenic agents and family susceptibility were some of the identified risk factors. The most common observed consequences were prolonged hospital stays and death. Conclusions: The current incidence of birth defects among newborns and stillbirths of in our population is similar to those obtained by other studies performed in Brazil and in other underdeveloped countries. Birth defects are one of the major causes leading to lost years of potential life. The study of birth defects in underdeveloped countries should continue. The identification of incidence, risk factors and consequences are essential for planning preventive measures and effective treatments. © 2011 Fett-Conte et al; licensee BioMed Central Ltd.

Glyphosate como regulador de crescimento em arroz de terras altas

The lodging of some rice cultivars at harvest time can lead to significant losses in yield, and the inappropriate water and nitrogen management, under high-tech conditions, can aggravate the problem. The use of vegetal regulators is an alternative to reduce lodging, however, information on this topic are rare. The study aimed to evaluate the application of glyphosate sub doses (26 g ha -1, 52 g ha -1, 78 g ha -1, 104 g ha -1, 130 g ha -1, 156 g ha -1, and 182 g ha -1) on agronomical traits, development, and yield of upland rice crops irrigated by aspersion, during the floral differentiation period. The experiment was carried out in Selvíria, Mato Grosso do Sul State, Brazil, through the agricultural years of 2008/2009 and 2009/2010. The increase of glyphosate sub doses, at the floral differentiation period of the Primavera cultivar, reduced the plants height, panicle size, and, consequently, yield. Sub doses higher than or equal to 78 g ha -1 eliminated the plants lodging process.

Nd:YAG Laser Irradiation effect on apical intracanal dentin-a microleakage and SEM evaluation

The purpose of this in vitro study was to evaluate the effect of neodymium:yttrium-aluminum-garnet (Nd:YAG) laser irradiation on intracanal dentin surface by SEM analysis and its interference in the apical seal of filled canals. After endodontic treatment procedures, 34 maxillary human incisors were randomly assigned to 2 groups. In the negative control group (n=17), no additional treatment was performed and teeth were filled with vertically condensed gutta-percha; in the laser-treated group (n=17), the root canals were irradiated with Nd:YAG laser (1.5 W, 100 mJ, 15 Hz) before filling as described for the control group. Two specimens of each group were prepared for SEM analysis to evaluate the presence and extent of morphological changes and removal of debris; the other specimens were immersed in 0.5% methylene blue dye (pH 7.2) for 24 h for evaluation of the linear dye leakage at the apical third. SEM analysis of the laser-treated group showed dentin fusion and resolidification without smear layer or debris. The Student's t-test showed that the laser-treated group had significantly less leakage in apical third than the control group. Within the limitations of this study, it may be concluded that the morphological changes on the apical intraradicular dentin surface caused by Nd:YAG laser resulted in less linear dye apical leakage.

Effect of Cycling Exercise at Different Pedal Cadences on Subsequent Muscle Strength

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spatial clustering applied to health area

The significant volume of work accidents in the cities causes an expressive loss to society. The development of Spatial Data Mining technologies presents a new perspective for the extraction of knowledge from the correlation between conventional and spatial attributes. One of the most important techniques of the Spatial Data Mining is the Spatial Clustering, which clusters similar spatial objects to find a distribution of patterns, taking into account the geographical position of the objects. Applying this technique to the health area, will provide information that can contribute towards the planning of more adequate strategies for the prevention of work accidents. The original contribution of this work is to present an application of tools developed for Spatial Clustering which supply a set of graphic resources that have helped to discover knowledge and support for management in the work accidents area. © 2011 IEEE.

SED-brachydactyly and distinctive speech: Report of a new familial case

Background: Spondyloepiphyseal dysplasia-brachydactyly and distinctive speech (SED-BDS) is a syndrome characterized by short stature, disproportionately short limbs, peculiar face, thick and abundant hair, high-pitched and coarse voice, small epiphyses, brachymetacarpalia, brachymetatarsalia and brachy-phalangia of fingers and toes, small pelvis and delayed carpal bone age, among other features. Case Report: We report a Brazilian patient with father, brother and sister presenting with the same typical features of the syndrome. Clinically, he showed disproportionately short stature, rhizo-meso-acromelic shortness of the extremities, short hands and feet, a peculiar distinctive high-pitched voice, peculiar facies, and other features already reported as characteristic of this syndrome. Radiographic fndings included shape anomalies of the vertebral bodies such as cuboid-shaped vertebral bodies, mild scoliosis, short and broad tubular bones, brachymetacarpalia, brachymetatarsalia, and brachy-dactyly, lumbar hyperlordosis, generalized osteopenia, and hypoplastic iliac wings. Conclusions: Few cases have been described, as this is a rare skeletal dysplasia. This paper describes a new familial case of SED-BDS. © The American Journal of Case Reports.