Melatonin and N-acetyl-serotonin cross the red blood cell membrane and evoke calcium mobilization in malarial parasites

The duration of the intraerythrocytic cycle of Plasmodium is a key factor in the pathogenicity of this parasite. The simultaneous attack of the host red blood cells by the parasites depends on the synchronicity of their development. Unraveling the signals at the basis of this synchronicity represents a challenging biological question and may be very important to develop alternative strategies for therapeutic approaches. Recently, we reported that the synchrony of Plasmodium is modulated by melatonin, a host hormone that is synthesized only during the dark phases. Here we report that N-acetyl-serotonin, a melatonin precursor, also releases Ca2+ from isolated P. chabaudi parasites at micro- and nanomolar concentrations and that the release is blocked by 250 mM luzindole, an antagonist of melatonin receptors, and 20 mM U73122, a phospholipase C inhibitor. On the basis of confocal microscopy, we also report the ability of 0.1 µM melatonin and 0.1 µM N-acetyl-serotonin to cross the red blood cell membrane and to mobilize intracellular calcium in parasites previously loaded with the fluorescent calcium indicator Fluo-3 AM. The present data represent a step forward into the understanding of the signal transduction process in the host-parasite relationship by supporting the idea that the host hormone melatonin and N-acetyl-serotonin generate IP3 and therefore mobilize intracellular Ca2+ in Plasmodium inside red blood cells.

Management of Cross Border Mergers and Acquisitions

This research thesis analyses the motivation behind the cross-border mergers and acquisitions deals. How mergers and acquisitions of new knowledge and assets, enhance business with expansion into new streams and international markets. Also, how mega deals help them to gain a power in the international markets. The research focuses on understanding the interrelation between motivations which are contributing to M&A activities and how issues like cultural differences and different management styles are overcome by these firms in cross-border settings. Chapter 1, gives a background knowledge on cross-border M&A as popular internationalization strategy choice, continuing with describing the process in Finnish and Japanese cultural context, and how these deals are proceeding in particular cases. Chapter 2, reviews the important findings and touches the common gaps or aspects those are not studied extensively, does play a key role in the success and failure of M&A deals. A methodology is presented in chapter 3, presenting the hurdles faced by many in this research field. Chapter 4, present the case study is presented to show how M&A can play an important role in structuring the entire economy of Japan. At last chapter 5, presents the evidence, if cultural, HRM and geographical aspects really contribute to the success of M&A, based on which managerial implications are suggested and propositions are built for future research references.

Social class as a factor for the construction of a musician’s identity : The Musician’s social background and identity questionnaire (MSBIQ) – a cross-sectional comparative quantitative online survey research study of music students at two higher education institutions in Finland

There is currently little empirical knowledge regarding the construction of a musician’s identity and social class. With a theoretical framework based on Bourdieu’s (1984) distinction theory, Bronfenbrenner’s (1979) theory of ecological systems, and the identity theories of Erikson (1950; 1968) and Marcia (1966), a survey called the Musician’s Social Background and Identity Questionnaire (MSBIQ) is developed to test three research hypotheses related to the construction of a musician’s identity, social class and ecological systems of development. The MSBIQ is administered to the music students at Sibelius Academy of the University of Arts Helsinki and Helsinki Metropolia University of Applied Sciences, representing the ’highbrow’ and the ’middlebrow’ samples in the field of music education in Finland. Acquired responses (N = 253) are analyzed and compared with quantitative methods including Pearson’s chi-square test, factor analysis and an adjusted analysis of variance (ANOVA). The study revealed that (1) the music students at Sibelius Academy and Metropolia construct their subjective musician’s identity differently, but (2) social class does not affect this identity construction process significantly. In turn, (3) the ecological systems of development, especially the individual’s residential location, do significantly affect the construction of a musician’s identity, as well as the age at which one starts to play one’s first musical instrument. Furthermore, a novel finding related to the structure of a musician’s identity was the tripartite model of musical identity consisting of the three dimensions of a musician’s identity: (I) ’the subjective dimension of a musician’s identity’, (II) ’the occupational dimension of a musician’s identity’ and, (III) ’the conservative-liberal dimension of a musician’s identity’. According to this finding, a musician’s identity is not a uniform, coherent entity, but a structure consisting of different elements continuously working in parallel within different dimensions. The results and limitations related to the study are discussed, as well as the objectives related to future studies using the MSBIQ to research the identity construction and social backgrounds of a musician or other performing artists.

Cross-transmission of vancomycin-resistant Enterococcus in patients undergoing dialysis and kidney transplant

The objective of this study was to investigate the occurrence of vancomycin-resistant Enterococcus (VRE) cross-transmission between two patient groups (long-term dialysis and kidney transplant patients). Molecular typing, by automated ribotyping with the RiboPrinter Microbial Characterization System (Qualicon, USA), was used to analyze VRE isolates from 31 fecal samples of 320 dialysis patients and 38 fecal samples of 280 kidney transplant patients. Clonal spread of E. faecalis and E. casseliflavus was observed intragroup, but not between the two groups of patients. In turn, transmission of E. gallinarum and E. faecium between the groups was suggested by the finding of vancomycin-resistant isolates belonging to the same ribogroup in both dialysis and transplant patients. The fact that these patients were colonized by VRE from the same ribogroup in the same health care facility provides evidence for cross-transmission and supports the adoption of stringent infection control measures to prevent dissemination of these bacteria.

IgE cross-reactivity between Lolium multiflorum and commercial grass pollen allergen extracts in Brazilian patients with pollinosis

Lolium multiflorum (Lm) grass pollen is the major cause of pollinosis in Southern Brazil. The objectives of this study were to investigate immunodominant components of Lm pollen allergens and the cross-reactivity of IgE with commercial grass pollen allergen extracts. Thirty-eight serum samples from patients with seasonal allergic rhinitis (SAR), 35 serum samples from patients with perennial allergic rhinitis (PAR) and 30 serum samples from non-atopic subjects were analyzed. Allergen sensitization was evaluated using skin prick test and serum IgE levels against Lm pollen extract were determined by ELISA. Inhibition ELISA and immunoblot were used to evaluate the cross-reactivity of IgE between allergens from Lm and commercial grass pollen extracts, including L. perenne (Lp), grass mix I (GI) and II (GII) extracts. IgE antibodies against Lm were detected in 100% of SAR patients and 8.6% of PAR patients. Inhibition ELISA demonstrated IgE cross-reactivity between homologous (Lm) and heterologous (Lp or GII) grass pollen extracts, but not for the GI extract. Fifteen IgE-binding Lm components were detected and immunoblot bands of 26, 28-30, and 32-35 kDa showed >90% recognition. Lm, Lp and GII extracts significantly inhibited IgE binding to the most immunodominant Lm components, particularly the 55 kDa band. The 26 kDa and 90-114 kDa bands presented the lowest amount of heterologous inhibition. We demonstrated that Lm extract contains both Lm-specific and cross-reactive IgE-binding components and therefore it is suitable for measuring quantitative IgE levels for diagnostic and therapeutic purposes in patients with pollinosis sensitized to Lm grass pollen rather than other phylogenetically related grass pollen extracts.

Repeated exposure of adolescent rats to oral methylphenidate does not induce behavioral sensitization or cross-sensitization to nicotine

Several lines of evidence indicate that the use of stimulant drugs, including methylphenidate (MPD), increases tobacco smoking. This has raised concerns that MPD use during adolescence could facilitate nicotine abuse. Preclinical studies have shown that repeated treatment with an addictive drug produces sensitization to that drug and usually cross-sensitization to other drugs. Behavioral sensitization has been implicated in the development of drug addiction. We examined whether repeated oral MPD administration during adolescence could induce behavioral sensitization to MPD and long-lasting cross-sensitization to nicotine. Adolescent male Wistar rats were treated orally with 10 mg/kg MPD or saline (SAL) from postnatal day (PND) 27 to 33. To evaluate behavioral sensitization to MPD in adolescent rats (PND 39), the SAL pretreated group was subdivided into two groups that received intragastric SAL (1.0 mL/kg) or MPD (10 mg/kg); MPD pretreated rats received MPD (10 mg/kg). Cross-sensitization was evaluated on PND 39 or PND 70 (adulthood). To this end, SAL- and MPD-pretreated groups received subcutaneous injections of SAL (1.0 mL/kg) or nicotine (0.4 mg/kg). All groups had 8 animals. Immediately after injections, locomotor activity was determined. The locomotor response to MPD challenge of MPD-pretreated rats was not significantly different from that of the SAL-pretreated group. Moreover, the locomotor response of MPD-pretreated rats to nicotine challenge was not significantly different from that of the SAL-pretreated group. This lack of sensitization and cross-sensitization suggests that MPD treatment during adolescence does not induce short- or long-term neuroadaptation in rats that could increase sensitivity to MPD or nicotine.

TRP channels, omega-3 fatty acids, and oxidative stress in neurodegeneration: from the cell membrane to intracellular cross-links

The transient receptor potential channels family (TRP channels) is a relatively new group of cation channels that modulate a large range of physiological mechanisms. In the nervous system, the functions of TRP channels have been associated with thermosensation, pain transduction, neurotransmitter release, and redox signaling, among others. However, they have also been extensively correlated with the pathogenesis of several innate and acquired diseases. On the other hand, the omega-3 polyunsaturated fatty acids (n-3 fatty acids) have also been associated with several processes that seem to counterbalance or to contribute to the function of several TRPs. In this short review, we discuss some of the remarkable new findings in this field. We also review the possible roles played by n-3 fatty acids in cell signaling that can both control or be controlled by TRP channels in neurodegenerative processes, as well as both the direct and indirect actions of n-3 fatty acids on TRP channels.

Association of adult weight gain and nonalcoholic fatty liver in a cross-sectional study in Wan Song Community, China

Our objective was to examine associations of adult weight gain and nonalcoholic fatty liver disease (NAFLD). Cross-sectional interview data from 844 residents in Wan Song Community from October 2009 to April 2010 were analyzed in multivariate logistic regression models to examine odds ratios (OR) and 95% confidence intervals (CI) between NAFLD and weight change from age 20. Questionnaires, physical examinations, laboratory examinations, and ultrasonographic examination of the liver were carried out. Maximum rate of weight gain, body mass index, waist circumference, waist-to-hip ratio, systolic blood pressure, diastolic blood pressure, fasting blood glucose, cholesterol, triglycerides, uric acid, and alanine transaminase were higher in the NAFLD group than in the control group. HDL-C in the NAFLD group was lower than in the control group. As weight gain increased (measured as the difference between current weight and weight at age 20 years), the OR of NAFLD increased in multivariate models. NAFLD OR rose with increasing weight gain as follows: OR (95%CI) for NAFLD associated with weight gain of 20+ kg compared to stable weight (change <5 kg) was 4.23 (2.49-7.09). Significantly increased NAFLD OR were observed even for weight gains of 5-9.9 kg. For the “age 20 to highest lifetime weight” metric, the OR of NAFLD also increased as weight gain increased. For the “age 20 to highest lifetime weight” metric and the “age 20 to current weight” metric, insulin resistance index (HOMA-IR) increased as weight gain increased (P<0.001). In a stepwise multivariate regression analysis, significant association was observed between adult weight gain and NAFLD (OR=1.027, 95%CI=1.002-1.055, P=0.025). We conclude that adult weight gain is strongly associated with NAFLD.

Distribution of aflatoxin contamination in maize samples

The distribution of the aflatoxin contamination was studied among four maize fractions, separated according to Brazilian grading rules for maize. The fraction that contained fermented, moldy, heated and sprouted grains normally had the highest levels of aflatoxin. However, the fraction contribution to the whole sample contamination level took into account the contamination fraction level and its weight to the whole sample. Considering this, the fraction that contained insect damaged, hollow, up to ¼ fermented and grains damaged by other causes was normally the fraction responsible for the total contamination level in the samples. Nevertheless, the fraction contributions were variable from sample to sample. Therefore, in conclusion, it was not possible to establish a standard behavior for grain fraction-type contribution for different maize lots. The Brazilian grading by qualitative types applied to samples did not show statistic correlation with aflatoxin contamination levels (P<0.05). Two type-1 samples (the best quality type) presented contamination of 380 and 146ng/g. The number of samples with contamination levels above those allowed by Brazilian law (20ng/g) was the same for qualitative types 2, 3, and BS (Below Standard).

Cross-border transmission capacity development – Experiences from the Nordic electricity markets

The liberalisation of the wholesale electricity markets has been considered an efficient way to organise the markets. In Europe, the target is to liberalise and integrate the common European electricity markets. However, insufficient transmission capacity between the market areas hampers the integration, and therefore, new investments are required. Again, massive transmission capacity investments are not usually easy to carry through. This doctoral dissertation aims at elaborating on critical determinants required to deliver the necessary transmission capacity investments. The Nordic electricity market is used as an illustrative example. This study suggests that changes in the governance structure have affected the delivery of Nordic cross-border investments. In addition, the impacts of not fully delivered investments are studied in this doctoral dissertation. An insufficient transmission network can degrade the market uniformity and may also cause a need to split the market into smaller submarkets. This may have financial impacts on market actors when the targeted efficient sharing of resources is not met and even encourage gaming. The research methods applied in this doctoral dissertation are mainly empirical ranging from a Delphi study to case studies and numerical calculations.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Identification of main contamination points by hygiene indicator microorganisms in beef processing plants

The microbiological quality of beef and meat products is strongly influenced by the conditions of hygiene prevailing during their production and handling. Without proper hygienic control, the environment in slaughterhouses and butcher shops can act as an important source of microbiological contamination. To identify the main points of microbiological contamination in the beef processing chain, 443 samples of equipment, installations and products were collected from 11 establishments (1 slaughterhouse and 10 butcher shops) located in the state of Paraná, Brazil. The microbiological quality of all the samples was evaluated using Petri dishes to obtain counts of mesophilic aerobes (AC), total coliforms, Escherichia coli (EC), yeasts and molds (YM). The main contamination points identified in butcher shops, in decreasing order, were stainless steel boxes, beef tenderizers, grinders, knives, mixers, sausage stuffers, plastic boxes, floors and drains. In the slaughterhouse, these points were sausage stuffers, platforms, floors and drains. The most severely contaminated products were fresh sausages and ground beef. This information about the main points of microbiological contamination in the beef processing chain is expected to aid professionals responsible for hygiene in similar establishments to set up proper hygienic procedures to prevent or reduce microbiological contamination of beef and meat products.

Impacts of capacity remunerative mechanisms on cross-border trade

The European ambitious targets to increase the share of renewable generation pose a challenge to the generation adequacy. Many European member states are concerned that energy-only markets alone might not be able to deliver sufficient capacity required to meet the future electricity demand and back up shortfalls of energy from renewable energy sources (RES) during periods of low wind and sun. Many EU members consider to re-design their energy-only markets and establish different forms of capacity remunerative mechanisms (CRMs) to maintain the security of supply. There is a certain concern that market design changes at the level of EU member countries might conflict with the European goal of a single market. As soon as many European markets are highly interconnected, uncoordinated CRMs might create negative crossborder effects and hinder the achievement of the Internal Electricity Market in Europe. The pros and cons of capacity markets are well examined at the national level. However, the cross-border effects of capacity markets within the European market aiming at higher integration have received less attention. This doctoral dissertation examines the cross-border effects of unilateral implementation of CRMs applying both theoretical and case study analyses. The results show that capacity remunerative mechanisms (CRMs) may cause negative cross-border effects, especially if they are implemented unilaterally.